SFWordProcessing plug-in err only on one of my pages in iWeb

at first i couldnt even open iWeb without crashing. hoefler font fix didnt help. then i mored the com.apple.iWeb... file to desktop which did work.
however, once in iWeb, if i so much as click or right-click on one of my web pages, it crashes immediately. even if i right-click to "delete page".
is there a way of deleting a page without invoking it which causes iWeb to crash? its not a huge deal as i can still work on other pages, but it is annoying to have a land mine in my iWeb project.
thanks,

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
2 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
3 - reboot.
4 - launch iWeb and see if the the problem page can be viewed or deleted.
If the above fails continue with:
1 - backup your domain.sites2 file.
2 - launch iWeb, create a new site and drag all pages but the problem page to it.
3 - see if you can delete the old site containing the problem page.
OT

Similar Messages

Exported pdf only did one of two pages

My source pdf was in two page but the export to Excel only showed one of the pages. How do I get both pages exported?

Hi, Marshall.
No, being on a Mac shouldn't affect this issue.
I never saw a report submitted to our File Conversion Issue Form, either with the name or email address "marshall". Did you submit it? If you'd like us to investigate this further, please submit a copy of your PDF to this Form, referencing this forum post.
Thanks.
Dave

HT201301 I've backed up my iPad and lost a years worth of work in Pages. Is there any way to get it back? I had done file sharing between iPad and Mac but it only saved one of the Pages documents.

I've backed up and updated my ipad and lost a years worth of work in Pages. Is it possible to get it back? Before I updated I tried to do filesharing with my Mac but it would only share 1 document from Pages. All the others have gone.

I reposted the question here where I'm getting advice:
http://discussions.apple.com/thread.jspa?threadID=1302031&tstart=0
S.

One of my pages on iweb when publishing has a error!!!!!!!!

Now that iweb can publish, When I start the publish process, One of my pages says "cannot publish error on all men trend page, try again later" Why would there be a error on that page and how and I fix it.

No , I don't think that is the problem. I publish the page many times before and now only after this mobile me launch I am unable to publish that page. when will all this be done and when will I be able to publish my page. How do everyone knows that this is even a mobile me problem. Does anyone knows what is going on. The error reads like this when I am publishing:
An error occurred while publishing file “/Web/Sites/Notice/AllMen_Trend/Pages/runway_men_summer08files/Media”. Try publishing again later.

Favicon only in one, the (index)-page?

Isn't it necessary to repeat a link to a favicon in every
page?
Where is the correct place for it cause of this: "you have a
link to a
favicon in the body of the page"?
Ciao, servus und salut
Janis

> I usually drop a favicon in the root directory and it
gets displayed
> whatever page I happen to be in.
As I understand it, this is not so for all browsers. But then
I am not so
favicon literate....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"djinn" <[email protected]> wrote in
message
news:fu7bgr$212$[email protected]..
> Murray *ACE* wrote:
>>> Isn't it necessary to repeat a link to a favicon
in every page?
>>
>> As far as I know it is.
>>
>>> Where is the correct place for it cause of this:
"you have a link to a
>>> favicon in the body of the page"?
>>
>> In the head of the page.
>>
>
> Is that true?
>
> I usually drop a favicon in the root directory and it
gets displayed
> whatever page I happen to be in.
>
> --
> chin chin
> Sinclair

I plugged my iphone in for the first time to my itunes account and it now reads that this device is already associated with an apple id. what does that mean. i only have one apple id. and do i chose cancel or transfer?

i plugged my iphone in for the first time to my itunes account and it now reads that this device is already associated with an apple id. what does that mean. i only have one apple id. and do i chose cancel or transfer?

Hello there, Shellywms09.
The following Knowledge Base article points out why you are receiving that message on your iPad:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

On my iPod touch why does it only allow one earphone to play? I've plugged the ear phone kno another device and they worked perfectly fine what is wrong with my iPod

On my iPod touch why does it only allow one earphone to play? I've plugged the ear phone kno another device and they worked perfectly fine what is wrong with my iPod

- Try inserting and removing the headphone plug a dozen or so times.
- Next try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem that indicates a hardware problem, like a bad headphone jack.

When I connect my ipod to my computer, Itunes tells me the ipod is synced to another account. I only have one account. My only account is blank now. I'm not sure what is going on but I don't want to plug in my iphone or ipad now.

I need help to sync my ipod. When connected to my computer, itunes tells me it is synced to another account. I only have one account. I had tons of stuff stored on itunes, now my itunes account is blank. I fear connecting my iphone or ipad now. I would like to use my itunes to download movies and shows to my ipad2' but I'm not sure I want to risk it. I have signed onto my husband's computer and tried to assess my itunes account but get the same result! Help!

" I had tons of stuff stored on itunes, now my itunes account is blank."
How did this happen?
Use your backup copy of your computer to put everything back.
You can sync iphone/ipad to one and only one itunes library at a time. Syncing to another will indeed erase the iphone.

Message: iWeb quit unexpectedly while using the SFWordPRocessing plug-in.

Ol' Toad are you out there - I'm in trouble again??
Did lots of work to website recently - having no problems but yesterday all sorts of things started happening when I tried to publish. At one time my account bar came up bright blue and solid telling me it was full and urging me to buy more space (Previously it was showing 9GB remaining) Then my password kept getting randomly rejected other times no problem. Now I get this message every time I try to publish: "iWeb quit unexpectedly while using the SFWordPRocessing plug-in"
Happens if I try to publish entire site or changes only, on mobile me or a local folder
I turned off last night and safe booted this morning but same thing is happening and NOW something else has happened - all pages are black- I am getting a message that "an error occurred while trying to open this page" - all fonts are missing and that I need to add all images and movies to the document again. This is MAJOR work - what has happened?
I am working in iWeb 9 3.0.2 please advise as soon as possible Thanks JAckie

That's a well known problem that has a couple of solutions:
iWeb & iWork: Applications may suddenly quit after updating to Mac OS X v10.6.2
The million dollar trick or how to fix iWeb in 10.6.2
OT

Sfwordprocessing plug-in error and frozen disk permissions

I was able to use iweb 1.1.2 until I loaded Leopard. Now, not only can I not change my webpage hosted by Mac, but I can not even delete it to try and build it new. Nor can I run Disk Repair Permissions (it freezes at about 1/8th and doesn't move-the same with Verify Permissions). What do I need to do to fix this? When I try to load most of the pages in my iweb, I get the SFWordProcessing plug-in message. None of this was an issue till I upgraded to Leopard.
I need to update and change my website and quickly, please help! Would also like some sort of answer regarding the Disk Repair Permissions, Disk Verify Permissions.
I have posted this in iweb as well, but that section seems to get little traffic and I would really like to find an answer if anyone out there has one.

Have you installed Toast?
Some people have this problem and it goes away when the reinstall Toast.
Others have found that the Oblique font is a problem with a variety of programs including the iWork apps and iWeb.
They all get the SFWordProcessing plug-in message.
Removing any reference to the Oblique font seems to resolve the issue for those people.
Apple - Support - Discussions - SFWordProcessing plugin ...
http://discussions.apple.com/thread.jspa?messageID=6520532

When closing and reopening, my tabs aren't restoring like the once did. My history is only keeping one day. Need to know how to change these settings.

When closing and reopening Firefox, my tabs aren't restoring like they once did. I used to have all my tabs restore each time I opened Firefox. Now it starts with one fresh new tab and all my others are lost. I do a lot of research so this is important.
My history is only displaying one day even though I have never changed my settings even after I updated it last year.
Need to know how to restore these settings.
***OH! special note: I can't use the recently closed tabs or recently closed windows because its a grayed out option****

Are you using cleanup software like CCleaner?
If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
* http://kb.mozillazine.org/Session_Restore
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

How do I only keep ONE copy of each picture?

For some reason my iPhoto library multiplies like rabbits. I've had to delete duplicates, triplicates and more several times. I'll have one good picture, one small picture, and one blurry picture most of the time or sometimes I will get a blank outline where there should be a picture. I only want one of each picture and don't want two iPhoto libraries like I currently have. I have no idea why I have two, but I do. I'm taking up valuable hard disk space with multiple copies of the same pic.
Maybe a better way of asking this is how do I make what I see in my iPhoto library be the only pics on my computer? Can I delete other picture folders etc?
Speak slow, I'm a MAC user because I broke every windows pc I used!!!
THANKS!!!

Chris
Well that's odd:
When iPhoto manages the files
b. you will have dupes all over the place
You will have exactly the same number of files, less a single alias per picture.. Obviously you don't understand how iPhoto works.
c. if you have to triage your Mac - you may find utter chaos in determining file versions and having to open thousands of files to determine whats what.
It's easier to recover from a damaged database if iPhoto manages the files.
With the user managing the files:
1. Import and deleting pics are more complex procedures
2. You cannot move or rename the files on your system or iPhoto will lose track of them
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about finding the files, that can be easily done from the iPhoto Window.
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Letting iPhoto manage the files takes up no more disk space than you doing it, backing up is much easier and recovering from errors is also much easier.
Regards
TD

I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4: - I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet

I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4:
- I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet I need to shut down and restart CS6.
- Camera RAW: if I change any setting in Camera RAW (except exposure), having first optimized the exposure, the exposure will automatically return to zero. Sometimes when I've set exposure and cropped the picture in Camera RAW Plug-In, the effects are lost just by opening the picture in CS6.
- Sometimes if I crop a picture in Camera RAW, it may be impossible to open it again from Bridge!
- I cannot do lens corrections in Camera RAW, at all. The Camera RAW comment is that "it cannot load the correct lens type". Why?

Are you writing that when you select a large number of images in the bridge like a hundred thumbnails when you then use Bridge menu Tools>Photoshop>Contact Sheet II that Photoshop only produces a single contact sheet for the first few thumbnails and fails to produce additional contact sheets for the other selected thumbnails? Photoshop contact sheet II script should create as many contact sheet as needed for the numbers of thumbnails selected. Perhaps the script is hung or you have exhausted your machine resources.
ACR Crop tool does not crop the RAW file it records crop settings to be used during the conversion process. Camera RAW DATA is not altered. The only changes made to RAW Files is ACR Metadata may be added. Anything you do in ACR can be un-done in ACR. If you can not open a RAW File in ACR the Files is either corrupt or from a new camera ACR does not support yet. ACR should not corrupt RAW files.
If you do not have a lens profile for ACR I think you should still be able to do lens correction manually in ACR.
Some of what you write I don't follow could you post some screen captures of your problems often a picture helps.

I get the message "IPod is synced with another library" I only have one Library acount. Nothing I have purchsed shows up.

When I open up my I Tunes account with my IPod plugged into the computer, I get the message" IPod is synced with another library" I only have one Library. None of the music or Apps that I have purchased shows up.

sorry...I am computer illiterate....not sure what you were asking!

How do u hookup apple tv to a tv that only had one hmdi., How do u hookup apple tv to a tv that only had one hmdi.

I only have one hmdi plug in I have a splitter connecting my blue ray player how can I hook up my apple tv

Welcome to the Apple Community Mikewats.
You need an HDMI switch not a splitter.

SFWordProcessing plug-in err only on one of my pages in iWeb

Similar Messages

Maybe you are looking for