Sfwordprocessing plug-in error and frozen disk permissions

I was able to use iweb 1.1.2 until I loaded Leopard. Now, not only can I not change my webpage hosted by Mac, but I can not even delete it to try and build it new. Nor can I run Disk Repair Permissions (it freezes at about 1/8th and doesn't move-the same with Verify Permissions). What do I need to do to fix this? When I try to load most of the pages in my iweb, I get the SFWordProcessing plug-in message. None of this was an issue till I upgraded to Leopard.
I need to update and change my website and quickly, please help! Would also like some sort of answer regarding the Disk Repair Permissions, Disk Verify Permissions.
I have posted this in iweb as well, but that section seems to get little traffic and I would really like to find an answer if anyone out there has one.

Have you installed Toast?
Some people have this problem and it goes away when the reinstall Toast.
Others have found that the Oblique font is a problem with a variety of programs including the iWork apps and iWeb.
They all get the SFWordProcessing plug-in message.
Removing any reference to the Oblique font seems to resolve the issue for those people.
Apple - Support - Discussions - SFWordProcessing plugin ...
http://discussions.apple.com/thread.jspa?messageID=6520532

Similar Messages

Disk Utility can't Verify Disk Permissions" and "Repair Disk Permissions"

I tried to run "Verify Disk Permissions" and "Repair Disk Permissions" on an external partition, but they all grayed out! "Verify Disk" and "Repair Disk" were fine! The "Owners Enabled" is "Yes". Why they were grayed out ?!
Get Info on this volume showed:
Ownership & Permissions:
You can "Read & Write"
Details:
Owner: admin
Access: "Read & Write"
Ignore ownership on this volume: checked or unchecked STILL grayed out!
Other partitions on the SAME drive are able to do "Very Disk Permissions" and
"Repair Disk Permissions" (as they are NOT grayed out !) The ONLY difference
between the one (CAN'T) and the rest partitions is that one (CAN'T) has
owner by "admin", and the rest partitions (OK to veryify pewrmissions) are owner
by "system". ANY CLUE ?
-DC

The options to verify or repair permissions are only available on a disk with Mac OS X 10.2 or newer installed, and all Mac OS X versions set the owner of the partition containing them to system when installed.
(24684)

Is anyone else having problems with Verifying and Repairing Disk permissions?

Hey folks, every time I try to verify and repair disk permissions lately, this is all I get...
Verifying permissions for “Macintosh HD”Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
I usually get a long list, then repair it, and it seems to keep things clean.
I'm having trouble with my address book.
When I move the mouse down the bottom of the page my dock doesn't come up right away, sometimes it won't - I have to command tab to go to another program.
So I'm wondering if these are related. Thanks for any help!

Not specifically Sky & Yahoo, but there seem to be quite a few threads with password problems and Yahoo. Is that what you are experiencing. Long thread here:
https://discussions.apple.com/thread/3804431
And a thread here where Gtj56 came up with a fix that worked for him:
https://discussions.apple.com/thread/3800540?start=15&tstart=0

Safe to verify and repair disk permissions with SSD?

Is it safe to verify and repair disk permissions with an SSD installed?

Thanks.
Its just strange, as soon as I repair all my permissions, if I verify them again straight away, there are some that already need re-repairing

Errors during Repair Disk Permissions

I get the following error messages when trying to repair disk permissions in Leopard (see below).
Does anyone know why this is happening and what I can do to fix it?
Repairing permissions for “OS X Root”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

These are my error messages
Permissions differ on "System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Versions/A/Frame works/QuartzComposer.framework", should be lrwxr-xr-x , they are drwxr-xr-x .
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
From what I read here, I can ignore the SUID message. What about that first one though. It was not changed (I did a 2nd disk repair after I saw it and got it again). Ignorable, she says hopefully??
Bea

SFWordProcessing Plug-in Error

So,
I am still trying to get over this iWeb screwup that has been plaguing us all for a couple of day.
Now, I see that some people are reporting that everything is working again and I wish I could be one of them.
I keep getting an error message in iWeb that I have never seen before... it is something about the SFWordProcessing Plug-in. I have no idea what this means, but I know it makes iWeb quit while starting or quit early.
Ideas/thoughts?

Have you installed Toast?
Some people have this problem and it goes away when the reinstall Toast.
Others have found that the Oblique font is a problem with a variety of programs including the iWork apps and iWeb.
They all get the SFWordProcessing plug-in message.
Removing any reference to the Oblique font seems to resolve the issue for those people.
Apple - Support - Discussions - SFWordProcessing plugin ...
http://discussions.apple.com/thread.jspa?messageID=6520532

Error and no disk

my music is lost somewhere in the ipod i can hook it up to any computer and music plays but none showes in pod although capacity is full. i tried to restore it (yes i know music will be lost but i did save it) but all i get is error with 4 numbers and no disk found

Likely a hard drive failure
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

New macbook pro, safari won't open and repair disk permissions did nothing to help

Safari starts, blue bar moves about an inch in search bar, then stops. Then nothing. Tried repairing disk permissions to no avail. Safari still doesn't open. Whatever os x that is installed on new macbook pro's, since just bought on Sunday 10-14-12, is the operating software. The apple store there is no user manual. Strange. So here we are on another, older macbook pro, able to go on internet and see what answers or diagnoses others have tried and trued.

3 days old?, just pack the machine up and tell them you want another one, that this one is a lemon.
They will likely take your word for it and just give you another rather than you demand your money back instead.
If you wait too long then they say you should have brought it back sooner, now have to wait until it's fixed, only to give you more problems later.

Odd errors in repairing disk permissions...

I get the following log when I go to repair my disk permissions:
Repairing permissions for “Mac”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Anyone know what exactly this might mean?
Thanks in advance,
-J

Mac OS X 10.5: Disk Utility's Repair Disk Permissions reports issues with SUID files
http://docs.info.apple.com/article.html?artnum=306925
Quoted from above:
"You can safely ignore these messages. They are accurate but not a cause for concern."

Start Up Time, slowing down and Verify Disk Permissions?

Hey All, today since i was curious and i havent done it in a while, i timed my macbook start up time. It was clocked at 42 seconds, which is slower than what it used to be. Can you tell me your start up time? Also im a little inexperienced with Apple Computers i would like to know why its slowing down. Since it slowed down, i went to Verify Disk Permissions to see if maybe something was wrong and this showed up http://i19.photobucket.com/albums/b173/JoshSG/Picture1-2.png again, i repaired the permissions about a month ago and i guess it didnt clear up. Does that have anything to do with the start up time and any way to actually clear those permissions up?
Thanks
I hope it is not confusing

I am having the exact same problem- be curious to see if anyone has an answer. I think my problem may be related to time machine- if I unplug the firewire this doesn't seem to happen- not sure the 2 are connected. Do you use time machine via a firewire?

Leopard buggy and repairing disk permissions odd. realated?

Since installing 10.5 I've been having problems with apps quitting unexpectedly -- mostly mail, safari, and Final Cut suite programs.
When I repair permissions, I get this (which is new since installing leopard also):
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete
Is there any connection? Should I fix the situation that doesn't allow Dick Utility to repair my permissions? The apps quitting are driving me crazy!
Thanks!

There's no connection. See:
Mac OS X 10.5: Disk Utility's Repair Disk Permissions reports issues with SUID files
Also, it's always a great idea to search the forum for keywords related to your question before starting a new thread -- there's often someone else out there asking the same thing, and sometimes even an answer. This question, for example, has been asked dozens of times.

Disk Utility and Repair Disk Permissions

Using Yosemite 10.10.3 , an this is what I see every time I run the Disk Utility. Then I select 'Repair Disk Permissions' but nothing ever gets fixed. Whats the point of the 'Repair' button if nothing ever gets repaired?? Should I not believe the results of 'Verify Disk" either??
Verifying permissions for “Macintosh HD”Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .User differs on “private/var/db/displaypolicyd”; should be 0; user is 244.Group differs on “private/var/db/displaypolicyd”; should be 0; group is 244.

You can safely ignore those.
Mac OS X Disk utilities Repair Disc Permissions messages that you can safely ignore
https://support.apple.com/en-us/HT203172

Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1

I am learining to build CAF apps in Developer Studio in NW CE 7.1. Here are my steps and the errors I am getting:
Open Developer Studio
Switch to the CA perspective
File->New->Project
Choose Development Component under Development Infrastructure
Press Next
Choose Composite Application under sap.com
Choose MyComponents[demo.sap.com] under 'Local Development'
Vendor: demo.sap.com
Name: carpool
Caption: Car Pool
Language: American English
Domain: SAP-xApps
Support Component: CAF-APP (typed in, not chosen)
Press Finish
The following error appears:
Status ERROR
Plugin : com.sap.ide.metamodel.core.services.eclipse
code=0
Internal error
   Plugin name: Metamodel Core
   Internal error : com.sap.ide.metamodel.core.services.eclipse
   Class      : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
   Method     : computeIdeJarProperties
   Message    : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
   Exception : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:203)
at java.util.jar.JarFile.<init>(JarFile.java:132)
at java.util.jar.JarFile.<init>(JarFile.java:70)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install.
Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
The deployment of the archive failed with an exception!
([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
occurred while sorting the deployment batch items regarding the
dependencies.;nested exception is:
com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
found for the following deployment items:
1. Component: name:'carpool~ear',vendor:'my.company',location:
'localDevelopment',version:'20080501110329',software type: 'J2EE',
dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
'cafcoreear',vendor:'sap.com']
Unresolved dependency:
name:'cafruntimeear',vendor:'sap.com'          (not found in the admitted
batch items and the repository)
Unresolved dependency:
name:'cafcoreear',vendor:'sap.com'          (not found in the admitted
batch items and the repository)
Please check the error log for further informations.
Again, this looks like I am missing some components.
Any assistance is greatly appreciated.
TB

Further developments: As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time. In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated. Does anyone know how I can change the lookup directory for this dependency (or any dependency)?
Thanks,
TB

Vds_add_vd() error and frozen guest domain

Hello all,
trying to setup a guest domain but getting a frozen domain at the end of the process. Seems to be a combination of some other issues on the forum. Commands run...
# ldm add-domain myldom1
# ldm add-vcpu 8 myldom1
# ldm add-memory 4G myldom1
# ldm add-vnet vnet1 primary-vsw0 myldom1
# ldm add-vdsdev /dev/dsk/c0t3d0s2 vol1@primary-vds0
# ldm add-vdisk vdisk1 vol1@primary-vds0 myldom1
# ldm set-variable auto-boot\?=false myldom1
# ldm set-variable boot-device=/virtual-devices@100/channel-devices@200/disk@0 myldom1
# ldm bind-domain myldom1
# ldm list-domain
Name State Flags Cons VCPU Memory Util Uptime
primary active -t-cv SP 4 2G 3.2% 6m
myldom1 bound ----- 5000 8 4G
# ldm list-bindings myldom1
Name: myldom1
State: bound
Flags:
OS:
Util:
Uptime:
Vcpu: 8
vid pid util strand
0 4 100%
1 5 100%
2 6 100%
3 7 100%
4 8 100%
5 9 100%
6 10 100%
7 11 100%
Memory: 4G
real-addr phys-addr size
0x8000000 0x88000000 4G
Vars: auto-boot?=false
boot-device=/virtual-devices@100/channel-devices@200/disk@0
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Vnet: vnet1
mac-addr=0:14:4f:f9:f7:be
service: primary-vsw0 @ primary
[LDC: 0x1]
Vdisk: vdisk1 vol1@primary-vds0
service: primary-vds0 @ primary
[LDC: 0x2]
Vcons: [via LDC:3]
myldom1@primary-vcc0 [port:5000]
# ldm start-domain myldom1
LDom myldom1 started
# ldm list-domain
Name State Flags Cons VCPU Memory Util Uptime
primary active -t-cv SP 4 2G 0.6% 7m
myldom1 active -t--- 5000 8 4G 100% 7s
# telnet localhost 5000
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
Trying ::1...
telnet: Unable to connect to remote host: Network is unreachable
and in /var/adm/messages...
May 23 11:38:11 isdsyddev13 vds: [ID 556514 kern.info] vds_add_vd(): Failed to add vdisk ID 0
Tried stopping/unbinding the domain and then rebooting the primary domain, still doesn't work. Removed the guest domain, rebooted, recreated, still doesn't work. Any ideas on what else I can try? Thanks

Hi merwick,
thanks for the reply. Running sol10 11/06 (u3) with patch 124921. The disk wasn't in use anywhere else but vxvm is installed on the box which got me thinking. Seems I was getting hit by the veritas DMP issue (bug 6522993) even though the disk in question wasn't being used by vxvm directly. A "vxdisk rm" solved the issues. So first guest domain up and running :) Happy days. Uninstalled vxvm from the system as well and am off to try out zfs as boot disks (as described in the Ldom admin guide). Thanks again.

Internal Error and Frozen LR4

I just tried to open LR4. It opened, but then a screen with "An internal error has occurred" and a long string of words and symbols is in the middle and LR is frozen. I did a force quit and reopened to the some thing. I would appreciate help. Thank you.

Sfwordprocessing plug-in error and frozen disk permissions

Similar Messages

Maybe you are looking for