SG 200-08 does not permit changing System Settings screen

I am unable to change the settings on this screen:
Administration => System Settings
The GUI objects to any of the combination of characters I've entered into 'Hostname', including the provided default.
--sk

Verified this under both 1.0.5.1 and 1.0.6.2

Similar Messages

  • System setting does not allow changes to be made to object LSYS

    Hi
    Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
    Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
    System setting does not allow changes to be made to object LSYS
    Why it is saying like that . But i can able to include the other process types in the process chain .
    regards
    mohammed

    Dear Mohammed,
    Since you are trying to create process chain in production system.
    Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
    Check the settings in SE06. system would be non-modifiable for sure.
    in SCC4,  settings ->"changes to the cross customizing objects would be not allowed"
    These two settings/configurations would not allow any development or changes or edit or create in production.
    Please check with your basis folks and proceed further.
    Hope this would help you more in understanding

  • System settings does not allow changes to be made to object

    Hi,
              In one of my test system, when i tried to change the object  its displaying following error message.
    System settings does not allow changes to made to the object.
    I have checked the settings in se03, regarding modification objects of software components and namespace those are in state of modifiable for this namespace object.
      I would like to know, how to change the object in the namespace.
    Regards
    Srikanth

    Hi,
    In SE06, in addtion to system status and component status, check the namespace status too.
    It would be better if you know the namespace of the object you are trying to modify. Set it to modifiable and retry.
    To find namespace, open the object in SE80 and check the attributes. It would show assigned package, namespace, component etc.
    Regards,
    Srikishan

  • System setting does not allow changes to be made to object

    Hi experts,
      I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
    "System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.

    Hi,
    If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
    Or you  can find the text in the note:
    «/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
    Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
    Regards,
    André Nunes

  • System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_30

    hi,
    Recently we upgraded our BW system from BW 3.0B to BW 3.5.In BW 3.5,we created a planning area to which we
    assigned a transactional cube.Now when we are going for creating variables or planning levels for the planning area it
    gives the following error:
    System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_300ZPLAN
    Our support packages are as following:
    SAP_BASIS       640                   0009
    SAP_ABA         640                   0009
    ST-PI           2005_1_640            0000
    PI_BASIS        2004_1_640            0006
    SAP_BW          350                   0009
    BI_CONT         353                   0000
    Could you please suggest or help us in resolving the issue ?
    thanks and regards,
    Yogesh

    Hello,
    the above mentioned note is too old. Please check note 781371.
    Please also check in transaction SM30 view V_TRNSPACE
    the record for /1SEM/:
    Namespace:     /1SEM/
    Namespace role C
    Repair License
    SSCR Popup     X
    SAP Standard   X
    Gen Objs Only  X
    Regards,
    Gregor

  • The system does not permit settlement in USD

    Hello,
    I'm trying to settle WBS elements with value 0 VEF and X,XX USD and the system records the settlement, even when running the Tr. CJ88 and indicates no error. Id est, it seems the system does not permit settlement in USD. someone can help me with this?
    Thanks

    Hi
    If you manage multiple currency in CO and same in FI, system tries to settle both the currencies separately
    In your case, if Object Currency is VEF and Contr area currency is USD (or Vice Versa), and both the currencies are also managed in FI, then settlement settles both of them separately
    Regards
    Ajay M

  • F-32 - Posting Key 07 does not permit specification of a spl G/L Indicator

    Hi Expert
    Pl help on following -
    Customer has following
    Advance Rs. 10000 - Entered via T.code F-28 (Note We have different type of advnces collected from a customer and therefore we entre special G/L Indicator here, .i.e. "A")
    Outstanding Invoice Rs. 6000 - From Sales Module
    In F-32, partical payment we want to clear the Advance, so that System should knock off Invoice and keep 4000 as credit balance for further adjustment.
    However after we simutlate, we are getting error -
    "Posting Key 07 does not permit specification of Spl G/L Indicator  (Message No. F5761) which suggest to make following configruation changes.
    To correct above issue, I tried to correct the accounting configuration (OB41) for posting key 07 and selected "Speical G/L' Check box in 'Other attribute. Here I have also provided the allowed Spl G/L Indicator i.e. "A".
    However after above changes done, system is now reporting message F5311 "Incorrect automatic posting are cancelled" and coming out from F-32 Tcode itself.
    One last oberservation, In OB41, for posting key 07 "Payment Transction' tick is NOT selected. Actually posting key 07 is "Other Clearing". In posting key 08 which is "Payment Clearing" , I can see 'Payment Transction" is Selected. Is this making the difference.
    So I am in complete mess. Please help.
    - Sunil

    Thanks for your answer.
    I have following questiong
    1. Why system is suggesting posting key 07, as it is automatically coming during simutatlion.
    2. If using 07 is not correct, which one should be use and how to correct the configuration so that in simulation by defualt correct posting key will appear.
    Thanks in advance.
    - Sunil

  • 'My Application Page' is not allowed here because it does not extend class 'System.Web.UI.Page'

    I have a custom SharePoint 2010 solution that includes an aspx page. The aspx page in is in the /layouts folder within the solution and I created it by just adding an application page to the solution. I am trying to create a parent-child relationship between
    two different lists in SharePoint. From the parent I have a custom button on the ribbon that creates a child item with the ID of the parent stamped on it.
    The page is just a processing page that forwards on parameters from the parent to the new child item. (i.e. the ID value)
    The code generated when I add the aspx page is below:
    <%@ Assembly Name="$SharePoint.Project.AssemblyFullName$" %>
    <%@ Import Namespace="Microsoft.SharePoint.ApplicationPages" %>
    <%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
    <%@ Register Tagprefix="Utilities" Namespace="Microsoft.SharePoint.Utilities" Assembly="Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
    <%@ Register Tagprefix="asp" Namespace="System.Web.UI" Assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" %>
    <%@ Import Namespace="Microsoft.SharePoint" %>
    <%@ Assembly Name="Microsoft.Web.CommandUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
    <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="MY.Solution.Layouts.MY.Solution.processingpage" MasterPageFile="~/_layouts/application.master" %>
    <asp:Content ID="PageHead" ContentPlaceHolderID="PlaceHolderAdditionalPageHead" runat="server">
    </asp:Content>
    <asp:Content ID="Main" ContentPlaceHolderID="PlaceHolderMain" runat="server">
    </asp:Content>
    <asp:Content ID="PageTitle" ContentPlaceHolderID="PlaceHolderPageTitle" runat="server"> Processing Page </asp:Content>
    <asp:Content ID="PageTitleInTitleArea" ContentPlaceHolderID="PlaceHolderPageTitleInTitleArea" runat="server" > Processing Page </asp:Content>
    The code behind is as follows:
    using System;
    using Microsoft.SharePoint;
    using Microsoft.SharePoint.Administration;
    using Microsoft.SharePoint.WebControls;
    using Microsoft.SharePoint.Utilities;
    using System.Reflection;
    namespace MY.Solution.Layouts.MY.Solution
    public partial class processingpage : LayoutsPageBase
    protected void Page_Load(object sender, EventArgs e)
    try
    //Get a reference to the SPWeb object
    SPWeb oWeb = SPContext.Current.Web;
    //Use the Parameters That Are Passed In
    SPList thisList = oWeb.Lists[new Guid(Request.QueryString["List"])];
    SPListItem thisItem = thisList.GetItemById(int.Parse(Request.QueryString["ID"]));
    sContentType = thisItem["ContentType"].ToString();
    sContentTypeID = thisItem.ContentTypeId.ToString();
    if (sContentType == "Some Content Type")
    sContentTypeID = "";
    sAIID = thisItem["ID"].ToString();
    //Redirect to newform.aspx with the Appropriate parameters.
    Context.Response.Redirect(oWeb.Url + "/Lists/Blist" + "/NewForm.aspx?AIID=" + sAIAuditID.ToString() + "&ContentTypeId=" + sContentTypeID + "&ParentItemID" + Context.Request["ID"]);
    else if (sContentType == "Some Content Type")
    sContentTypeID = "";
    sAIID = thisItem["AIID"].ToString();
    //Redirect to newform.aspx with the Appropriate parameters.
    Context.Response.Redirect(oWeb.Url + "/Lists/AList" + "/NewForm.aspx?AIID=" + sAIID.ToString() + "&ContentTypeId=" + sContentTypeID + "&ParentItemID" + Context.Request["ID"]);
    else if (sContentType == "Some Content Type")
    sContentTypeID = "";
    sAICID = thisItem["AICID"].ToString();
    //Redirect to newform.aspx with the Appropriate parameters.
    Context.Response.Redirect(oWeb.Url + "/Lists/CList" + "/NewForm.aspx?AICID=" + sAICID.ToString() + "&ContentTypeId=" + sContentTypeID + "&ParentItemID" + Context.Request["ID"]);
    else
    LoggingService.LogError("MY.Solution - Processing Page", "No Applicable Content Type Found.");
    catch (Exception ex)
    LoggingService.LogError("My.Solution - Processing Page", ex.Message);
    finally
    //DO SOME FINAL THINGS HERE WHEN REQUIRED.
    In the page I need to use Request.QueryString to get the values from the URL. But when I deploy the solution and load the page I get the error:
    'MY.Solution.Layouts.MY.Solution.processingpage' is not allowed here because it does not extend class 'System.Web.UI.Page'.
    When I change the line:
    <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="MY.Solution.Layouts.MY.Solution.processingpage" MasterPageFile="~/_layouts/application.master" %>
    to inherit as follows:
    <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="Microsoft.SharePoint.WebControls.LayoutsPageBase" MasterPageFile="~/_layouts/application.master" %>
    it does not work either.
    If I change it to inherit like below:
    <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="processingpage.aspx.cs" Inherits="System.Web.UI.Page" MasterPageFile="~/_layouts/application.master" %>
    it also does not work.
    What does this error actually mean?  And why doesn't the default code generated by Visual Studio work?

    @NadeemYousuf I have tried this too and it didn't work.  
    What does the error even mean?  And why does the error appear with default Visual Studio code?  In my example I have just added a basic application page with no other code in it and it still does not work.

  • Format that does not permit data modification?

    When I try to change date/time of some images, I get this message.
    +"Aperture was not able adjust the date and time of the master files because they have a format that does not permit date modification."+
    While some images are modified successfully, others are not. Those files are not locked nor wrong permission setting. Anybody know what is causing this? The files are all Nikon's NEF files.

    kfuse wrote:
    When I try to change date/time of some images, I get this message.
    +"Aperture was not able adjust the date and time of the master files because they have a format that does not permit date modification."+
    While some images are modified successfully, others are not. Those files are not locked nor wrong permission setting. Anybody know what is causing this? The files are all Nikon's NEF files.
    hi, kfuse
    unless I'm mistaken you cannot edit the exif data created from the camera like date and time. you might want to do a search about this subject in our forum, there was a big brouhaha regarding this about a couple of years ago regarding a court case and exif date/time data.
    victor

  • Sun.security.validator.ValidatorException: Netscape cert type does not perm

    Hi,
    I am getting the following exception when clientAuthentication is enabled for ssl connection.
    I am using tomcat and a java client in my application.
    Please let me know how do i get through this.
    Thanks in advance
    -Sanjeev
    Below trace is from catalina.out
    ===========================
    http-8443-Processor24, SEND TLSv1 ALERT: fatal, description = certificate_unknown
    http-8443-Processor24, WRITE: TLSv1 Alert, length = 2
    http-8443-Processor24, called closeSocket()
    http-8443-Processor24, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: Netscape cert type does not permit use for SSL client
    http-8443-Processor24, called close()
    http-8443-Processor24, called closeInternal(true)
    ===================================
    I get the below exception in my java client application.
    ==========================================
    : 68 42 6F FD E9 35 AB E5 C7 48 31 2C 78 31 BA F0 hBo..5...H1,x1..
    0020: EB 97 10 1F F9 B2 03 B7 7D CE 8A 04 73 37 07 A1 ............s7..
    0030: 9D 46 5A A2 B7 99 EE 86 1D EE A1 E4 D6 64 73 9B .FZ..........ds.
    0040: 6B FA D1 19 44 54 C0 47 DC F8 E1 4B 33 F6 0D 2D k...DT.G...K3..-
    0050: C9 04 B7 E8 8F 67 00 99 78 67 CC BE 26 C4 73 B5 .....g..xg..&.s.
    0060: 88 26 F6 08 B7 A3 89 A0 28 29 79 DD 16 B0 86 8F .&......()y.....
    0070: DE AA EA D3 1F 9F 8B 5B E7 B4 51 3B C8 90 67 0D .......[..Q;..g.
    0080: 68 46 F1 CC 10 D9 hF....
    main, WRITE: TLSv1 Handshake, length = 134
    main, WRITE: TLSv1 Change Cipher Spec, length = 1
    main, handling exception: java.net.SocketException: Software caused connection abort: socket write error
    main, SEND TLSv1 ALERT: fatal, description = unexpected_message
    main, WRITE: TLSv1 Alert, length = 2
    Exception sending alert: java.net.SocketException: Software caused connection abort: socket write error
    main, called closeSocket()
    Exception
    =================================================

    Netscape cert type does not permit use for SSL clientTry using another certificate. Your certificate can't be used as a web browser client certificate.

  • DI: Stock Transfer error (Unique field value does not match the system ...)

    Hi
    I made an add-on that makes stock transfers via DI API. The add-on has been running for two months with more than 10,000 stock transfers with almost no problems.
    The company that is using the add-on have all their products managed by serial/batch numbers.
    But just with one transfer Im getting the error in the stock transfer Add() method:
    "Unique field value does not match the system serial number [(----)29-52]"
    And I tried to debug it without success, I checked that the system serial numbers exists in the origin warehouse and are available. And I really can't find where is the problem.
    If somebody knows what this error means, please let me know.
    Thanks in advance,
    Regards,
    Allan

    Hi János, thanks for your answer.
    I found what was the problem, it was not exactly what you told me, but you gave me some insights to found the problem.
    The thing is that Im using UDT's to store the information of stock transfers (before creating a real SAP stock transfer), because of the funcionality of the add-on. After some user have done some steps or validations, the add-on actually does the real SAP stock transfer.
    The problem here was that my tables had some InternalSerial for some Item, for example the serial A-234, and before the real SAP stock transfer was made, they changed the serial from A-234 to A234 (in the serial number management). So the add-on was trying to create the transfer with the serial A-234, but the serial A-234 no longer exists.
    I have to create a validation that if they change the serial number for an item, I have to change it in my UDT's.
    On the other hand, Im not sure, but I think that I read before that you made a Warehouse Management add-on. This add-on that Im working now is a kind of warehouse management.
    Im having a lot of headaches because the poor accessibility to the user fields in the OSRI and OIBT tables. Im sure that you have faced problems with this. If you have any tips or advices about this it would be greatly appreciated.
    Thanks again,
    Regards
    Allan

  • User Profile Incremental Sync does not views changes in profiles.

    User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD. 
    All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
    1.profile property is set up to sync with AD attribute (with EXPORT).
    2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
    3. sharepoint server 2010 SP1, "CU June 2012"  14.0.6123.5002
    4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
    there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
    which I resolved by clearing timer service cache.
    Help with advice, urls or solurions please..

    Hi  VlH,
    According to your description, the issue can be caused by the Profile or Profile Values table.
    You can check the event log and ULS log to see detail error message.
    To check event log, click the Start button and type “Event Viewer” in the Search box.
    For SharePoint 2013, by default, ULS log is at      
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
    For your issue you can refer to the similar thread:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
    Also a good blog for user profile synchronization:
    http://www.harbar.net/articles/sp2010ups.aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Table does not exist in system after DB Connect

    Hi Everyone,
    I must extract data from a oracle db.  I create a source system with DB Connect and it's connect successful.
    Later, i create a datasource for that source system. but it show the table does not exist in system. I'm sure the table is correct. why?
    Thanks!

    Check the schema names & ensure it is with the same owner/name as in the DB source table/view. You can also use a simple lookup table which checks table/views in your schema from other standard tables.

  • Instant Client on 64-bit Windows 7: Driver does not appear in System DSN

    Instant Client on 64-bit Windows 7: Driver does not appear in System DSN tab when creating a new Data source.
    What I did so far:
    I downloaded the basic and odbc zips for Window 64-bit.
    Unzipped the basic zip.
    Unzipped the odbc zip to the same directory.
    Added the dir path to the System Environment Variable called Path.
    Double-clicked on the odbc_install.exe to run it from Windows Explorer.
    Then I tried to add the driver to create a new data source but it does not appear in the list of drivers.
    From a cmd window, I navigated to the instant client directory and tried to run odbc_install again.
    I got the message: Oracle ODBC Driver with same name already exists.
    What am I missing?

    hello, I did it like that you say,but the result also is "oracle odbc driver with same name already exists". I don't kown what can I do it ,Thank you!

  • Field VBUND does not allow changes to the document ?

    If you post the trading partner, the trading partner(Field VBUND)does not allow changes to the document.
    I can't change trading partner.
    Thanks!!
    Message was edited by: Rico Wang

    Rico,
    Using trn code SM30, modify table V_TBAER and insert the entry
    BSEG-VBUND for account type S, D, K, A
    and see the effect.
    Thanks
    Mohit
    ps: you may want to check OSS notes as well.

Maybe you are looking for