SG 200-08p Wont upgrade firmware

I have a fleet of the SG-200-08P switches which are way behind on firmware. I went to upgrade them to the newest firmware available:
     "sx200_fw_1.3.7.18.ros"
After about a 5-7 minute wait, the web interface returned the message (tired multiple times):
     "Firmware Image download through HTTP failed. Wrong File Type."
I reset the router, same results. I went and installed the second most recent verson, "SG200-08x_FW_1.0.7.4.stk", which installed without any issues. Then tried the "sx200_fw_1.3.7.18.ros" file and again with the same result:
     "Firmware Image download through HTTP failed. Wrong File Type."
I then did a factory reset and tried again, same results. It seems that none of my routers want to use the .ros files, it preferes the .stk files. What am I doing wrong?
I'm accessing the upgrade feature via "Main Menu -> Administration -> Upgrade/Backup firmware" and have it set to:
X - via Http
X - Upgrade
X - Firmware image
Please HELP!!!

Thanks for the info. I was working off another post where someone laid claim to installing the 1.3.x firmware on their sg200 to enable SNMP protocols for Spiceworks Management software.
Does this mean there is no SNMP options for the SG200-08P switches?

Similar Messages

SG 200-08P config and firmware

Hi,
we just got 10 new devices with the actual fw 1.0.6.2.
Two problems were coming up ...
First: user and password ... The other SG 200 switches allow password with special characters like !? ... the SG 200-08 does not! That is not very helpful.
And we would like to have this fixed.
Second: After configuation of VLANs along with CDP an Cisco Phones we always had to restart the device to be sure the configuation change was applied. Otherwiese we were hunting problems that did not really exist. May be this could be fixed in a new version of the firmware, too.
Thanks ;-)
Sent from Cisco Technical Support iPad App

Thanks for the info. I was working off another post where someone laid claim to installing the 1.3.x firmware on their sg200 to enable SNMP protocols for Spiceworks Management software.
Does this mean there is no SNMP options for the SG200-08P switches?

Itunes wont update firmware on i phone

itunes wont update firmware on ihpone 3g running 4.2.1 version

Connect iPhone to syncing computer using USB cable.
Start iTunes on syncing computer.
Follow prompts from iTunes to upgrade.

PoE does no work for my SG 200-08P ?

Hi,
I've bought two SG 200-08P which have their 1-4 ports who can delivered PoE.
Whatever the PoE equipments I plug into those ports, it doesn't work.
If I plug a non PoE equipment in the 1-8 ports it's working fine.
I can log into the web interface of the switch, and when I go to "Port Management > PoE > Properties", I can see the following screen:
I don't know how switch the "Power" option to "On"...
I have the exactly same issue with a second and new SG 200-08P.
I've changed the firmware and I am now in the 1.0.6.2 version but I have the problem with the original version.
I also try to reset the switch several times, but it doesn't change anything.
Is anyone has a idea to what can I do or test ?
Thanks.

Hi Tom,
For now, I only try to connect differents Siemens IP phones (1 or 2 or 3 PoE classes) : OpenStage 20,
OpenStage 40 and OpenStage 60.
Those Siemens phones are working fine with other PoE switches like linksys, HP, catalyst, 300 series, Netgear ...
I've just noticed something interesting, in the "Status and Statistics > View Log > RAM Memory" menu :
When I clear the logs, only my computer is connected on port 8...
I'll try to find other PoE devices, to test with.
Regards.

SG 200-08P - connecting PCs and Phones

Hello,
we have a serious problem over here with some new SG 200-08P switches firmware: 1.0.6.2
They are setup behind 2 SG-200 50 layer 2 switches - actual firmware 1.3.2.02.
We have 4 VLANs: 1 for DATA and 2 for PHONE, 10 fpr MGMNT and 20 for GUESTS - on the 08-P only VLAN 1+2 is needed. CDR protocoll is active.
Ports 1-7 on the 08-P is setup as "Trunk, 1U, 2T", parameter: Auto Negotiation ON. We tried FlowControl ON and OF - makes no difference. Port 8 is setup as "Trunk, 1U, 2T, 10T" to the floor switch. The connecting port on the floor switch SG-200 50-switch ist setup as "Trunk, 1U, 2T, 10T".
One of the problem switches: on port 1-4 of the 08-P there are connected 4 Cisco 6921 phones . On Port 5-7 there are connected 1 HP Z400 and 2 Elite 7200 PCs. One of the 6921 phones is switching to a DELL Latitude 6420 laptop.
So it happens every morning, that the first staring PC ist working fine, then the switch has to be switched off and on to get the next PCs connected to the network. The switching 6921 phone does not connect at all. But after some more switching off/on it works.
We thried another 08-P hardware with the same config, we tried an older firmware level ... we setup the PoE-phone ports as GENERAL 1U, 2T. We gave external power to the phones so that PoE is not overloaded ... nothing helps. Only some switching off/on helps and the PC gets its IP address from DHCP and the phones all come up an find the CU 6000.
Is there someone outside who may give a helping hand on this?
Thanks so far...

Hi Jens-Peter,
I would try disabling smartports and green ethernet on the SG200 switches. Then you will need to hardcode each of the ports to have the necessary settings. Often times when a reboot is required to restore functionality smartports is the cause.
As for the 6921 phones, you need to be sure to have auto voice vlan enabled. Otherwise the phones will not be able to pick up the correct VLAN via CDP. Let me know, if you have any questions.
-Trent Good
** Please rate useful posts! **

WRT600N WONT FLASH FIRMWARE - 2 DIFFERENT ROUTERS!!

Is ANYONE running into problems flashing the 600N? I tried the Linksys latest firmware and it just wont upgrade! I JUST retuned one that was confirmed online as being defective - and it wouldn't upgrade. Now I have ANOTHER ONE! The manufacture dates are 1/2008 and 2/2008. I read on anotehr forum of a potential issue with a batch of these... but of course linksys wont admit this...
ANYONE??

I also cannot flash my WRT600N. I noticed, however, that my version is 1.01.35 build 5. The website has version 1.01.35 build 3. Maybe it won't go backwards.

Ipad wifi does not connect after upgrading firmware to 3.2.2

So many posts and replies on connection to wifi with iPad not working... My issue is that everyhing worked perfect a home until i upgraded firmware to latest (3.2.2?). Now it connects and disconnects in second intervals ??!!
no changes has been made to my router and my two macs connect as before, only iPad does not
Very frustrating indeed, so any tips on what i should do?
Cheers in advance

krannisto wrote:
So many posts and replies on connection to wifi with iPad not working...
You may already have seen these suggestions, but in case you haven't:
_Pad: Troubleshooting Wi-Fi networks and connections_
...from here:
http://www.apple.com/support/ipad/wifi
And every iPad comes with complimentary telephone technical support for 90 days:
http://www.apple.com/support/contact/phone_contacts.html
_iPad Service: Frequently Asked Questions_

Is it necessary to be connected to wireless router/ap to upgrade firmware of WRE54G V1.0 ?

Is it necessary to be connected to wireless router/access point to upgrade firmware of WRE54G V1.0 in order to support universal repeater mode ??? Please let me know with full details what should I do in order to upgrade the firmware but without stay connected (in range) of a signal of a wireless router ot an access point. Thanks.

neighbour_devil wrote:
Hey mike,
the static IP of 192.168.1.5 has to be assigned to one of the wireless PC's that you have....make sure that you assign the static IP to the "wireless network connection" . once you have done so....check if you are able to see the SSID of the WER54G..connect to that SSID...and then try to ping 192.168.1.240 from the command prompt...if you get replies...then try to upgrade the firmware.
Can someone walk me through the steps of assigning the static IP to the "wireless network connection" referred to in the last post? I would assume you would right click on My Network Places, then right click on the "wireless network connection", but give me the steps after that. I don't want to screw anything up. Also, is it necessary to turn the router off, or can I just temporarily disable the connection on my laptop?
Thanks,
~MaxMessage Edited by maxrich on 08-18-2006 06:30 AM

Upgrade firmware of n73.

How can i create playlist of video song for real player of n73. No option to create playlist or tracklis in real player n73 (like n80 real player). If the problem solve with firmware upgrade then please help me, How can i upgrade firmware of n73.

aj4036: i tried too but couldnt figure out how to create a video playlist... i dont think it has been implemented in the next firmware either...
you can update your firmware by taking your phone to your nearest Nokia Service Center or waiting for the N73 to be supported by the Nokia Software Updater

I have the error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. need help please.

error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. What sould I do?

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

After yesomite upgrade my iPhoto wont upgrade and open

after yesomite upgrade my iPhoto wont upgrade and open

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

How to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB

how to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB?
The 7921g is connected via USB to a PC. I am using a browser to access the phone. Documentation says "Click the Phone Upgrade hyperlink under SYSTEM options. " but that option is not present or not visible.

You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using the USB connection or by using the WLAN. To upgrade the phone software, enter the phone software TAR (firmware file name) or use the Browse button to locate the firmware file on the network.
To display the Phone Upgrade area, access the web page for the phone as described in the Accessing the Configuration Web Page for a Phone section available at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/21adm50.pdf

Apple remote desktop wont upgrade or install

apple remote desktop wont upgrade or install on yosemite
Apple store woint let me purchase it either

Hello and thanks for the reply.
I tried the original install and the next installer v3.2, then tried to license and update.
no go on either. The app freezes up on the serial number screen.
Also when I run the updated from the link I get an error stating I already have a newer version.
Frank

I still have not gotten the 200 credit for upgrading to the new iphone

i still have not gotten the 200 credit for upgrading to the new iphone.
the did get my old iphone device returned at the end of october! In the beginning of dec they told me i needed to wait six weeks. it was the sixth week.
Which we now long have.
I sent an email in saying that the rebate wasn't submitted. I
Why do we have to spend our life following up on billing issue with verizon when we pay a premium for your service....
starting to get more than frustrated

Oh gotcha! Thanks for the information. You may check status at https://www.trade-in.vzw.com/status.php5#top . You may also contact the Trade-In team directly by clicking on, Contact Us.
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

My ipod touch 3g wont upgrade from 4.2.1 to 4.3.3

while restoring from itunes it wont upgrade from 4.2.1 to 4.3.3 i even upgraded itunes no luck whats wrong i dont understand, please help.

What happens when you try?
Error message?
What does it say?
Is your ipod the 8GB model? If so, then it is second gen.

SG 200-08p Wont upgrade firmware

Similar Messages

Maybe you are looking for