SG 7.2 not applying any grades (Solved)

So as part of debugging SG 7.1's GPU acceleration breaking on XDCAM footage (which 7.2 claims to fix) I disabled GPU acceleration (thanks Dennis for the hint on that) but nothing was actually _rendered_, ie I could dial in a 100% gain increase and not one pixel would change intensity in the output. Not one single look setting does anything.
After upgrading to 7.2 and nuking my settings file (to be sure), I assume GPU acceleration is now enabled again, and playback is now relatively smooth compared to last time round! However, my looks still aren't applying.
Any ideas on how to debug this? Anyone else seen the same thing happen before?
Whoops - I'd disabled the Lumetri effect in Premiere and this apparently meant nothing rendered in Speedgrade, either. Easy fix!

I'd hope the folks have Adobe have cracked this for you but in case they haven't the PPro project file is just a big XML file, it's quite possible to open it with a text editor or XML editor and make alterations. I don't know exactly what SG adds to the file but i suspect it's just some attributes and these could be removed.
Also sometimes if you start a new PPro project and import the old project that process can clean up problematic issues (sometimes)
Are you able to take the project onto a different computer and see if it's your setup that's throwing the error or whether it's the file itself
Hope this helps,
cheers
Paul

Similar Messages

  • Clicking a Paragraph Style Does Not Apply Style to Text

    I just switched from a PC to a brand new MacBook Pro (OSX Lion 10.7), and I bought InDesign CS5.5. I have been using CS4 on a PC for a couple of years and had no issues. For some reason, I cannot apply Paragraph Styles by placing my cursor in the text and clicking the Paragraph style. It highlights the clicked style for a moment, and then de-highlights all the styles, but does not apply any changes. The only way I can apply a Paragraph Style right now is by right clicking the style and selecting "Apply..." from the drop down menu. It's very puzzling. I was wondering if anyone had any experience with this. I also have Microsoft Office: Mac 2011 installed on the laptop if that makes a difference to anyone. Any help would be greatly appreciated, since I typeset and edit for my living, and this problem is slowing me down a bit.

    Neither. Let's say I click into a paragraph. The current style will be highlighted. If I click on another style (or even attempt to re-apply the same style by clicking on it in the styles pane), it momentarily highlights the new style, then flashes a little bar underneath (like the one that shows up if I were to try to re-organize the styles list by dragging a style to a different pace in the styles list), then all the styles become unselected, but no changes have been applied to the paragraph in question. Very definitely not normal. It is almost as if the pane assumes that I am attempting to drag the style even when I am merely clicking on it. Very weird.

  • Hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

    hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

    hey Sally,
    Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to  you
    http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
    Regards,
    A. Zaatari
    National Instruments
    Applications Engineer

  • [solved][laptop-mode-tools] hard drive power settings not applied

    I've used the laptop-mode-tools now for quite some time. However, recently the power management settings are not applied anymore. Possibly since updating to systemd...
    My laptop-mode.conf looks as follows:
    CONTROL_HD_POWERMGMT=1
    # Power management for HD (hdparm -B values)
    BATT_HD_POWERMGMT=254
    LM_AC_HD_POWERMGMT=254
    NOLM_AC_HD_POWERMGMT=254
    However, even after doing a systemctl restart laptop-mode-tools.service I always get
    $ sudo hdparm -B /dev/sda
    /dev/sda:
    APM_level = 96
    Setting it manually works:
    $ sudo hdparm -B 254 /dev/sda
    /dev/sda:
    setting Advanced Power Management level to 0xfe (254)
    APM_level = 254
    $ sudo hdparm -B /dev/sda
    /dev/sda:
    APM_level = 254
    Of course, the settings are lost upon rebooting in this case.
    Any idea where the problem could be?
    Last edited by rggjan (2012-10-08 12:25:04)

    I apologize if it is bad style to answer to a post marked as [solved] but:
    Same problem here!
    HDParm-settings are not applied on boot by LMT.
    laptop-mode.conf:
    # Should laptop mode tools control the hard drive power management settings?
    # Set to 0 to disable
    CONTROL_HD_POWERMGMT="auto"
    # Power management for HD (hdparm -B values)
    BATT_HD_POWERMGMT=100
    LM_AC_HD_POWERMGMT=200
    NOLM_AC_HD_POWERMGMT=254
    # hdparm -B /dev/sda
    /dev/sda:
    APM_level = 96
    Any ideas or solutions on this so far?
    And why is this post marked as 'solved'?
    edit:
    1.) manual set hdparm-settings survive reboot but not suspend!
    2.) no difference between CONTROL_HD_POWERMGMT="auto" or "1"
    3.)
    # systemctl status laptop-mode
    laptop-mode.service - Laptop Mode Tools
    Loaded: loaded (/usr/lib/systemd/system/laptop-mode.service; enabled)
    Active: active (exited) since Do 2013-01-24 14:05:20 CET; 8min ago
    Process: 664 ExecStart=/usr/sbin/laptop_mode init auto (code=exited, status=0/SUCCESS)
    4.) pointed out that this seems to be a bug: https://bugs.archlinux.org/task/33262 as systemd does not restore apm values on wake up.
    Last edited by renegat (2013-03-09 11:01:42)

  • My Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

    my Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

    Carlos-
    Start by signing out and back in to see if it will see the subscription: 
    How to sign in and sign out of creative cloud (activate/deactivate)
    If the apps are installed fine and close after launch see this link:
    CC applications close immediately after launch
    If the problem is something different, please let us know the error you see or what is happening on the screen so we can advise  you on a solution
    Pattie

  • When I forgot my password, my husband received the instructions at his email. His email does not appear any where in my account. How do I solve this problem?

    When I forgot my password, my husband received the instructions at his email. His email does not appear any where in my account. How do I solve this problem?

    When you set up your ipad did you or your husband also set up a rescue e-mail address for you? If so, that would be why he received the instructions. Or do you sync your ipad with his computer?
    Actually in terms of it being a problem, it actually makes it easier for you to answer your security questions and follow the instuctions to get back on your ipad. Otherwise, you'll have to call Apple Support.
    To delete the rescue e-mail account pleases read this thread. (Poster's photos did not come through with the instructions.)
    https://discussions.apple.com/thread/5218141?start=0&tstart=0

  • Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

    Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

    Hey ilyaz20360341,
    Could you please specify how exactly did you transfer Acrobat from one MAC to other.
    You might need to deactivate the software from your old machine and then activate it on the new one with the same serial number (for Acrobat license) or Adobe credentials (for Acrobat subscription).
    If you have done the same way, then let me know if you are able to open Acrobat itself.
    Do you get any specific error message while opening a PDF?
    Hope to get your response.
    Regards,
    Anubha

  • My IPAD is not giving any sound it is muted but when head phone plugged in it is giving sound wghat is the problem please answer and solve

    my ipad is not giving any sound from ipad but giving sound from headphone when plugged in, what may be the problem i dont know but facing much problems as phone is muted.I have checked all switches.The sound switch is also on.Red is not visible in rightside switch.
    Please solve the problem,how it is happened whats solution,i want remedia measures
    IPAD 3GS iOS 8.1.2 updated recently but sound muted please solve my problem

    What do you have Settings > General > Use Side Switch Set To ? If 'rotation lock' then you mute/unmute sounds via the Control Centre (swipe up from the bottom edge of the screen), not the switch on the side of the iPad.
    If that is not 'on' then try inserting and removing headphones and see if that gets sounds to work, and if not then try a soft reset (i.e. a reboot) and see if that makes any difference : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear

  • Any changes on SCCM console not applied

    Hello,
    We have stand-alone primary site based on System Center 2012 R2 Configuration Manager, suddenly I notice that any changes occur in console is not applied for example I change local admin password in task sequence, remove computer from specific collection
    but no changes applied.
    Plus on System status I didn't found any component monitor.
    I notice that backup SQL maintenance task was stopped because Symantec net backup client was installed, after removing the client I could initiate SQL backup by starting the service.
    Anyone receive such issue ?
    I'm going to check SQL, because it's look like changes are not stored in database, maybe SQL logs are full or something like that, if any one have an idea please share it with me.
    Thanks
    Abduljalil Abolzahab

    @Narcoticoo
    Thanks Narcoticoo
    Actually I found errors in smsdbmon.log files such as
    Failed to connect to the SQL server, connection type: SMS ACCESS
    A network-Related or instance-specific error had occurred while establish a connection to SQL server. Server is not found or not Accessible.... etc
    SQL installed with the same server.
    I checked services and found that SMS_EXCUTIVE was running under local account and status is "Stopping" I change the account to Site admin account then restart and everything is working fine.
    Thanks again 
    Abduljalil Abolzahab

  • I am getting a 'MIDI timeout' error message when I open garageband. I am not using any other apps so why is this happening. Restarting does not solve the issue.

    I am getting a 'MIDI timeout' error message when I open garageband. I am not using any other apps so why is this happening. Restarting does not solve the issue.

    I should also add that I am using core audio, no external MIDI device and Garageband v 6.0.5. Thanks

  • HT1338 I have just completed the recent software update. When opening iPhoto the updates applied themselves and stalled at step 5 at 99% and will not finish. any recommendations would be greatly appreciated.

    I have just completed the recent software update. When opening iPhoto the updates applied themselves and stalled at step 5 at 99% and will not finish. any recommendations would be greatly appreciated.

    I have just completed the recent software update. When opening iPhoto the updates applied themselves and stalled at step 5 at 99% and will not finish. any recommendations would be greatly appreciated.

  • Thank you for providing immediate  feedback.   bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. bt i dont have any problem in recieving calls.

    Thank you for providing immediate  feedback.   bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. then i dont what is wrong with my iphone.The same sim which i used in iphone4s is working in all other phones.its not the problm of carrier.
    Iphone 4s Black 16gb

    Rather than starting a new thread every time it would be easier to follow you if you stick to the one thread

  • I applied for the uptodate program to update to the mountain lion os x, but i have not received any email or response. what do i do?

    I have applied for the free up-to-date program for the mountain lion os x upgrade. I received a tracking number too. How do I use this number to find out the status of my request? I have not received any email since the past 24 hours of my applicaiton.

    It's hard to give accurate advise without knowing exactly which iMac model you have?
    However, beware that your iMac must meet both Processor and RAM requirements.
    OS X Lion - Technical Specifications
    General requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.
    Some features require a compatible Internet service provider; fees may apply.
    Also note that while 2GB of RAM is the minimum requirment, you will be much happier with 4 GB or more.
    RAM is a user upgrade, see >  iMac: How to remove or install memory
    Plus some great third party RAM suppliers are OWC (macsales) and Crucial
    Upgrade Apple iMac Memory & more – Easy Guide, Free Installation Videos.
    Crucial Memory Upgrades for Macs - Apple Memory

  • Comcast just replaced my cable modem/wireless router.  All devices connect properly except my iPhone 4.  It shows itself to be connected to the network, but it does not load any web page.  Resetting the iPhone does not solve the problem.  Any suggestions?

    Comcast just replaced my cable modem/wireless router.  All devices connect properly except my iPhone 4.  It shows itself to be connected to the network, but it does not load any web page.  Resetting the iPhone does not solve the problem.  Any suggestions?

    Thank you for your response.
    I had rebooted the router (several times, actually), to no avail.
    I do not know the answer to whether MAC filtering is enabled on the router.  Have tried to find info about that, but unsuccessfully.  Router is an Arris TG852G, supplied by Comcast.  I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist.  To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages.  He was unable to connect my iPhone, however, after trying for some time.
    I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g".  The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
    By the way, my iPhone does connect wirelessly to my network at home.  This difficulty is at a second home.
    Any other thoughts would be appreciated.

  • I updated my iPhone 4S to the new IOS 6 I like it but the problem I found the Wifi button it's not working any more it looks hidden , so what I should do to solve this issue ASAP

    I updated my iPhone 4S to the new IOS 6 I like it but the problem I found the Wifi button it's not working any more it looks hidden , so what I should do to solve this issue ASAP

    Tap Settings App > General > Reset > Reset Network Settings. See if fixed. If not, Restore Firmware with iTunes on computer. See if fixed. If not, all iPhone 4S have Warranty, make Genius reservation and take iPhone to Apple for resolution.

Maybe you are looking for