SG printed as SG instead of the whole name Singapore whrn using PLD

Good Afternoon,
Please guides us on any set up requirement.
We encounter an error in PLD. When bussiness partner has bill to address in SG. our PLD is printing this country as SG intead of the whole name Singapore
We currently using 2005B singapore Localization.
Regards,
Amy

Hi ,
u have to change the address format in administration ,
there u have to select the country field and check the description check box.
Then u can see the singapore.
rgds,
Premraj

Similar Messages

  • Adobe Reader 11.0.09 on MAC prints PDFs 1/6 of page 6 times on page, instead of the whole page. Help please!!

    I am using Mac OS X 10.9.5 and Adobe Reader 11.0.09 and it prints PDFs 1/6 of page 6 times on page, instead of the whole page. I have tried Print as Image, no joy. Multiple pages is NOT selected. I cannot get anyone from Adobe to help me with this problem and it is becoming a major impediment to my work!

    Hi Suzbat,
    If you try to print any other document from any other application. Did you check, are you facing the same issue or not?
    Have you tried to install latest drivers of the printer.
    Regards,
    Ajlan Huda.

  • C4780 ENV Printing in middle instead of the side as hardware requires

    c4780 ENV Printing in middle instead of the side as hardware requires.  is this a problem with the new dirvers?  it started happening right after driver update.

    Sounds like you want the "classic layout" (as in, the way Mail looked before Lion).  Go to Mail -> Preferences, click the Viewing icon and check "Use classic layout."

  • Is it possible to use NUMCHARS to display the number of characters in a block of text instead of the whole document? How?

    Is it possible to use NUMCHARS to display the number of characters in a block of text instead of the whole document? How?

    Getting the character count for a paragraph is trivial:
    Sub NumChars1()
    MsgBox Selection.Paragraphs(1).Range.Characters.Count
    End Sub
    Even outputting it to the document is trivial:
    Sub NumChars2()
    With Selection.Paragraphs(1)
      .Range.InsertAfter .Range.Characters.Count
    End With
    End Sub
    The real issue comes when you want to update the document. If the destination paragraph is only ever empty or contains the character count of the previous paragraph, you could use:
    Sub NumChars3()
    With Selection.Paragraphs(1)
      .Next.Range.Text = .Range.Characters.Count & vbCr
    End With
    End Sub
    Cheers
    Paul Edstein
    [MS MVP - Word]

  • I recently restored my ipad and backed it up. I was wondering if you could place back certain files only to your ipad instead of the whole backup.

    I recently restored my ipad and backed it up. I was wondering if you could place back certain files only to your ipad instead of the whole backup.

    the backup options on the iPad doesn't have that option

  • How can I delete one message instead of the whole conversation

    I would like to know a way to delete a single msg instead of the whole coversation, as my phone is pretty empty, space wise but few months down the line if my msgs are full i.e. 7500 and i want to keep some messages from the same conversation and delete few from them. Is it achievable and if not then is Apple introducing any updates that will fix this flaw as there are few applications out there which can solve this problem, but i am worried if it is going to void my warranty.
    Thanks

    This is not supported at the present time. I don't believe Apple has announced this will be included with a future update, but certainly possible this option is in the works.

  • How to read the whole name of a music title while scrolling down a list of titles? With the new iOs7 Music App there is no more black box showing the entire name!

    How to read the whole name of a music title while scrolling down a list of titles? The old software-app had the function to click for a longer time on a titles beginning letters until a black box revealed the entire name. I miss this function especially for my classical music, because lots of pieces start with similar words. E.g.:
    "Beethoven: Variations On "Ein Mädchen Oder Weibchen", Op. 66 - Var. 1"
    "Beethoven: Variations On "Ein Mädchen Oder Weibchen", Op. 66 - Var. 2"
    Scrolling in a list of title, I can't distinguish the titles, because just the first words are shown followed by: "...".
    That's horrible!

    Or you could include a width to your body style:
    body {
    background-image: url(Logo/sky1.jpg);
    background-position: center center;
    background-attachment: fixed;
    width: 75%;}
    It might work or not depending on your other color scheme.

  • How do i get the toolbar to just show the icons, not the whole name of the site

    on the toolbar, I just want the icons of my favorites to show, not the whole name so I can add more to the toolbar..

    Add code to the <b>userChrome.css</b> file below the default @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #PlacesToolbarItems > .bookmark-item:not([container]) > .toolbarbutton-text {
    display:none !important;
    </nowiki></pre>
    Note that this code leave the names for folders. You can leave out :not([container]) to hide those names as well
    The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
    *http://kb.mozillazine.org/Editing_configuration
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    * Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
    * Use a plain text editor like Notepad to create a (new) userChrome.css file in this folder (the names are case sensitive)
    * Paste the code in the userChrome.css file in the editor window and make sure that the userChrome.css file starts with the default @namespace line
    * Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userChrome.css. Otherwise Windows may add a hidden .txt file extension and you end up with a not working userChrome.css.txt file

  • In ios7 now the message sender appears as his nickname (instead of the first name).my contacts list in my iphone was taken from my outlook (exchange), so for each contact there is several details as (first name, last name, phone number,fax,..... And nickn

    In ios7 now the message sender appears as his nickname (instead of the first name).my contacts list in my iphone was taken from my outlook (exchange), so for each contact there is several details as (first name, last name, phone number,fax,..... And nickname) the problem is that now I see the sender identity in messages as a nick name while in the incoming calls I see the first name ( this problem appeared only in ios7
    Please help

    check in settings > mail contacts calendars, and in the contacts area you should be able to change how the names are viewed
    dante

  • Complied chm file displays 'HTML help' on the title bar instead of the window name

    Complied chm file displays 'HTML help' on the title bar instead of the window name.
    I tried several ways like:
    1. Changed File>Project settings name and also set the language to English (US).
    2. Checked the Title name in .hhp file
    3. Used the window while compling.
    4. Robohelp language settings.
    5. Also uninstalled and reinstalled robophelp.
    But nothing helped
    The title name is displayed correctly if the same project is compiled on another machine.

    When the code in the HHP and the regional settings on a PC match, the correct title is displayed. Or other way around is also true the help title is displayed in the language specified in the help project IF (and only if) the regional settings of the PC match that language. Otherwise, "HTML Help" is displayed.
    Hope this help.
    Thanks and Regards,
    Rahul Karn

  • IPhoto won't recognize my iPhone 3Gs.  just says there's an apple iPhone, instead of the device name, and says there are no files to download, but there are 62 items on my phone... what's going on?

    iPhoto won't recognize my iPhone 3Gs.  just says there's an "apple iPhone" instead of the device name, and says there are no files to download, but there are 62 items on my phone... what's going on?  as far as I can tell I have everything up to date and it's always worked in the past.

    Have you already confirmed your Mac as a trusted device?  Try this:
    Lauch iTunes.
    Connect the Phone/iPad
    When it asks you to trust it, say yes.
    Now try again to import.

  • How to get the form name which is used in standard tcode like me23n in sap

    how to get the form name which is used in standard tcode like me23n in sap
    Moderator message: four out of four threads locked, please read and understand the following before posting further:
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
    Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

    how to get the form name which is used in standard tcode like me23n in sap
    Moderator message: four out of four threads locked, please read and understand the following before posting further:
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
    Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

  • How can I import selected images from a folder instead of the whole folder in iPhoto 9.5.2?

    Hi there,
    I was trying to help my parents import some photos from a folder they have created with photos from their holiday. They only want to import select images from this folder into iPhoto. I said it would be easy and they can do it in 2 ways. First, they can drag and drop selected photos from their folder into iPhoto - and this works for them. However, more convieniently, they can click file>import to Library and then select the photos they want by going into the folder... Well that's how it works on my iPhoto '11 at least. When they showed me their screen via Skype (they are running iPhoto 9.5.2), when they click import to library, and try to go into the folder containing their photos, it imports the whole thing and there appears to be no way that they can enter the folder to select just a few photos from what I could see.
    Does anyone know anything aout this problem?
    Cheers.

    What view are using in the Import dialogue. Column view might be easiest to navigate.

  • Please help, can I restore a Aperture project instead of the whole Library?

    Hi,
    I really need some help, ok so I use Time Machine and backup weekly on my Time Capsule so I know my work is safe. But now here comes the question I just realised I need to restore some pictures but I do not know how to go about it. Do I have to restore the whole Aperture Library which is 40GB, or can I just restore a particular project or even much better just restore a picture?
    Thanks
    Catherine

    catchapman wrote:
    Hi, the one thing I do know is that Aperture keeps everything in the Home Pictures folder, but its all within the Aperture application.
    Those are two different things. It's likely all managed by the Aperture application, but the data won't be inside the app itself.
    But yes, if you can tight-click click on that folder, then +Show Package Contents+ and navigate to individual pictures from the normal Finder, you're not going to be able to restore selected items.
    iPhoto is similar, but has it's own special handling with Time Machine, where you can browse and/or restore individual items from the +iPhoto Library+ package.
    You might find some info in the Aperture forum.
    It's a bit cumbersome, but you might be able to restore the whole thing to an alternate location, then copy what you want from the restored package.

  • How can i search certain music in the library of my device instead of the whole itunes library

    i want to search albums that are on my phone but when i type the name of it in the searchbar in the new itunes and the album shows up it gives me the album for the whole itunes library and not my phone im sorry if this is confusing but this is the est way i can explain

    Kirby has already summed it up nicely. If you really want to ensure, that the recipient will see the the image as an attachment and not as an embedded image, compress the file before you send it. Export the image version in the right size to your Desktop, then right-click (or ctrl-click) and use "fCompress ...." from the contextual menu. Drag the compressed file to the Mail icon in the Dock.
    Just in case, you are sending your images to Windows users and have not come across this setting, you may want to check the Mail option in the "Edit" menu: "Always send Windows-friendly attachments".

Maybe you are looking for