SGE2000 - Multiple IP address on the sameinterface

Hi, anyone knows if there is a way to configure a secondary ip address (over the same address range) in a vlan interface on the SGE2000?
For example, I want Interface Vlan 10 on mw switch has 172.16.10.1/24 and 172.16.10.2/24. Is that possible? If I try I get an error message with a duplicate IP address error. On Catalyst switches it can be done, but on Small Bussiness?
Thanks a lot
Carlos

Hi Carlos,
On all the small business L3 capable switches you can associate one IPv4 address to each VLAN.
Or switch at layer 2 and allow the WAN router to have a secondary IP address.
regards Dave

Similar Messages

Multiple shipping addresses for the same supplier (depending on the symbol)

Hello ,can we set up multiple shipping addresses for the same supplier (depending on the symbol)?
.& How..
Thanks

a delivery adedress has nothing to do with a certain supplier, except you are talking about subcontracting (do you?)
a delivery address specifies an address where you want the supplier to send the goods to.
if it is a third party PO, then the delivery address is derived from ship-to partner of the sales order.
in case of a standard order to stock, the delivery address is coming from the storage location address (if maintained). if no storage location address is maintained, then SAP takes the address from your plant.
You can manually add a delivery address in MEAN transaction and then manually assign in POs delivery address tab.
here you can as well take the address from any address already in your system (e.g. any customer or vendor).

Assigning multiple IP address to the same Interface in rc.conf

Hi,
Is there any way to assign multiple IP address to the same Interface in rc.conf ?
Or else how is it done?
Thanks
--Siju

Like oh so many things, IP aliasing is covered in the wiki.
Or you can just add the commands to /etc/rc.local if you need to do it some other way.

Can you use multiple email addresses on the owa app?

Can you use multiple email addresses on the Microsoft OWA App?

You can do it but there is a delay from the bluetooth speaker. You'll need an iphone or ipad using the Apple app "Control", airplay setup, bluetooth speaker, and an Apple laptop or desktop.
I used my laptop to connect to my bluetooth speaker so that sound streams to my bluetooth device. Then, on my iphone I opened Control and connect the music to my airplay and my laptop at the same time. The music goes to your airplay speaker, and then to my laptop which then blue tooths it to my speaker. But, as I said the bluetooth takes an extra step to stream it and so the music is not in sync. Its like a second and a half delay....

E4200 v2 - Uses multiple MAC addresses for the same device

This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
Seems the V1 had the same issues that they did not fix on this.
The Cisco connect software shows 5 devices the Web based utility shows 3??.
Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
Secondly, may I know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

Multiple Email Addresses in the Seperate Remittance Advice Delivery setup

In R12 Oracle Payables, is it posssible to specify multiple email addresses in the Email field under the Separate Remittance Advice Delivery tab. This is to send separate remittance advice to multiple email addresses for a given supplier / supplier site.
Navigation:
Responsibility: Payables Manager
(N): Suppliers -> Entry
Query a supplier.
On the left side, click on Payment Details
Click on the Update Payment Details icon for a supplier site
Click on the tab Separate Remittance Advice Delivery
Select Delivery Method = Email
Enter email address in the Email field.
Does Oracle support comma or semi-color delimited email addresses entered in the Email field, by which Separate Remittance Advices can be sent to those email addresses?
Thanks.

Oracle support comma to specify multiple email address.
I have tested the same in R11i instance and specified multiple email address with comma as separator.
Hope this helps.
Thanks and Regards
Manish Jain.

Can i send to multiple email addresses for the same contact

I coach a baseball team and I want to create contacts under the kids' names with email addresses for both parents listed. Can I send email to multiple email addresses listed inside the same contact? I hope this makes sense.
Thanks!

You can do it individually, but it can also be done with Groups in Contacts, but you will need to create two or more groups. Once you have created the Groups in Contacts, drag the contacts that have multiple email addresses into each group. Then, select Edit Distribution List… from the Edit menu in Contacts.
For each group, select one address or the other for each contact. Do the same for the other group.
When you address an email, add both Groups to the address field in Mail.

Managing multiple email addresses for the same contact

Hi
I have set up a group so I can email multiple people at once using the usual method. However, when I put the 'xx group' in the Bcc, it mails them fine, but where I have more than one address for the contact, it picks one without asking me.
How do I set it so it always chooses a certain (main) address? For one, it sent it one of two addresses I had listed as 'home', on another it sent it to an address I had listed as 'work'.
They also appeared in different positions on the card, e.g. it is not sending tit to the first one it sees on the card.
Any thoughts?
Thanks
Mark

found the answer somewhere else:
When sending a message to a Group and a Group member (or members) has multiple email addresses, the following was copied from Address Book Help.
Choose Edit > Edit Distribution List.
Select the group whose addresses you want to manage.
Click the pop-up menu (column header) to choose which type of information you want to manage—phone number, email address, or street address.
Select the address or phone number you want to use for each member with multiple addresses or phone numbers.

Ability to add multiple email addresses to the same contact person

Hello SRM Experts,
I have a question in SRM 5.0
In "Personal Data" tab of "Employee Data" in Manage Business Partner, we have the ability to add multiple email address. But only one email can be selected as standard.
We have a new requiremnt that more than one email address has to be selected. Which means, when a bid invitation is published, the email notification has to go to all the email addresses from that list.
How can this be achieved?
Any information would be appreciated.
Thank you

By default the system send intimation to only one email id to the contact person.
If you want to be send to the multiple email id for a contact person. you need to implement the same in the BADI..
Try to find the BADI which is called on save of Bid invitation. You can check of the 'Published' status in the BADI method and fire the emails as required.
Regards,
Ramesh

Ability to send email to multiple email addresses of the same contact perso

Hi All,
We are using SRM 5.5.
In "Personal Data" tab of "Employee Data" in Manage Business Partner, we have the ability to add multiple email address. But only one email can be selected as standard.
We have a new requirement that when a bid invitation is published, the email notification has to go to all the email addresses from that list. i.e to pick up as many email addresses as are stored in the contact (personal data) screen in the Manage Partner tab.
This changes also applies to the change and republication process of bid invitation when click on u2018inform bidder u2018 button.
Any information would be appreciated.
Regards,
S K.

One option is the following:
1. Go to SPRO and locate "define actions for document output"; select the "processing types" for BBP_PD_BID. Look at the "Smart Form Mail" processing class / method. If it is the standard class CL_PD_BID_PROCESSING_BBP, change it to one of your own Z class and method. (You could make copy of the standard CL_PD_BID_PROCESSING_BBP class.)
2. Modify the method PROCESS_BBP_BID_MAI_BCS of your Z class; locate the comment "Create and send email" and make changes to that section to add more email recipients of that contact person.

How does FF handle multiple ip addresses on the device?

Hi
I was wondering if someone could point me at documentation or explain how FF handles the situation where the device has multiple IP addresses ie an Ethernet card and a wireless card active at the same time and with different networks associated with each device. How does FF decide which interface to use and is there someway of making it use a particular interface always...
tia
nava

Windows Vista and 7 give priority to the wired Network. So if you have Wireless and Wired connected, Windows will (by default) use the wired. Firefox uses what Windows does, so it will also use the Wired network. The only way that I know of to force Firefox to use one network over the other is to disconnect or disable the unwanted network. But this sort of thing is primarily handled through the OS, not Firefox.
Also, you should update to Firefox 11, as Firefox 9 has some pretty big security holes that have been patched in 11.

Send to Multiple email addresses using the job notification package

I'm trying to send notifications to mulitple addresses, and have not been successful in creating the right syntax, I've tried:
exec add_job_email_notification('J1','[email protected];[email protected]','JOB_FAILED');
and other combinations. What is the trick to send to more the one address?

Hi,
As the documentation says, recipient_address may be a comma-separated list of e-mail addresses. So you should be using commas to separate you addresses e.g.
'[email protected],[email protected]'
Hope this helps,
Ravi.

Does anyone know how to import multiple email addresses from the cc part of an email inot addressbook without having to do them one by one?

i'm trying to import a group that i belong to from the cc area of an email i received in mail to addressbook without having to do them one by one which is plainly tedious. does anyone know how to do this? can i convert them to vcards somehow, all together not individually?
thanks!!

I have the same question

Allow the user to add multiple email addresses in Email ID Field

In my jsp page, the funtionality i need to enhance is to allow the user to enter multiple email addresses in the "To" field of my Email A friend Task...right now it allows only one email id to be input by the user
Can anyone suggest me how to achieve it using javascript /jstl
Thanks in Advance

one more alternative is u can use : StringTokenizer class.
Code as follows: I hope this also helps u. But it will be used at server side. not at client side(for client side validations , we are using javascript).
java.util.StringTokenizer stringTokenizer=new java.util.StringTokenizer(request.getParameter("to"),",");
          String[] list=new String[stringTokenizer.countTokens()+1];
          int i=0;
          while(stringTokenizer.hasMoreTokens()){
               list=stringTokenizer.nextToken();
               i++;
Regards

Multiple email address in OIM 11g

Hi All,
I have to store multiple email addresses of the users while creating users in OIM.
For this one approach would be to define user defined fields which will store the value of alternate email Ids. But while configuring email notifications, how can I use the values of alternate email Id? Or do I have to use some other approach?
Thanks,
Amruta

How are you sending the email notifications out? I don't think there is any way to configure OIM to use the UDF values as email addresses when you are sending notifications from OOTB code/objects. If you are using your own code to send notifications then you can handle the same.
-Bikash

SGE2000 - Multiple IP address on the sameinterface

Similar Messages

Maybe you are looking for