Sgen driver for Soalris 10 x86

Hi,
Is this driver available on Solaris 10 x86 ?
Dummy question, but I don't have a Solaris x86 box for now to verify this.
Regards

Yes:
% ls -l /kernel/drv/sgen /kernel/drv/amd64/sgen
-rwxr-xr-x 1 root sys 40136 Jan 23 2005 /kernel/drv/amd64/sgen
-rwxr-xr-x 1 root sys 23980 Jan 23 2005 /kernel/drv/sgen

Similar Messages

Realtek PCIe GBE network card driver for Solaris10 x86

Hi Gurus,
My laptop has a Realtek PCIe GBE network card but I could not find the driver for Solaris10 x86 anywhere, can anybody help me with this issue?
Thanks

how about this?
http://homepage2.nifty.com/mrym3/taiyodo/eng/
other google hits indicate that there is a realtek driver in OpenSolaris.

Driver for Atheros AR9565 wifi Soalris 11.1 x86 url?

Where I can find the driver for Driver for Atheros AR9565 wifi Soalris 11.1 x86
Regards
Amin

Hello,
The only wifi/Atheros card that is on S11 HCL list is AR242x 802.11 agb Wirless PCI Express Adapter:
http://www.oracle.com/webfolder/technetwork/hcl/data/components/details/atheros/sol_11_11_11/7066.html
So I assume there are no official drivers for AR9565 from Oracle.
Have you tried Atheros (vendor) page?
HTH,
Wojciech

X86 printer driver for 64 bit Windows 7

I have Windows 7 (64bit) on my computer. I want to install an x86 driver for my HP Photosmart C6280 printer so my XP laptop can print to this printer through my home network. I started by clicking on Devices and Printer, clicked on the Photosmart printer icon, right clicked the icon and selected Printer Properties. I clicked on the Sharing tab and the change setting button. I then selected Additional Drivers. I put a check in the box next to x86 and clicked OK. Windows wants me to provide the driver. I can find it on the installation disk for the printer.
How do I get this driver installed on my computer?

If you were able to install anything for the printer, then uninstall it. Next, download the correct software from this location:
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us&lang=en&product=3194498
During the install you can select drivers only or the full software package, I believe.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Driver for Intel Corp. Intel(R) PRO/Wireless 2200BG in Solaris 10 x86

Hi Folks,
I bought a Laptop with the NIC mentioned in the Subject. After installing Solaris 10 x86 I'd like to install a driver for this card. Can someone of you tell me how, or point me to a good documentation?
Cheers
Sven

as far as i know, intel wireless not supported yet in solaris 10.
damn, intel and solaris have not realy work our on their support relationships. No wonder Sun went for AMD. :p

RealTek Wireless driver for Solaris 11.2 x86

I have a Lenovo Z50-70 notebook.
Solaris can detect the ether net card but can not detect the wireless both are RealTek
scanpci is as follows
root@dhcppc4:~# scanpci
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x0a04
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x8086 device 0x0a16
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x03 function 0x00: vendor 0x8086 device 0x0a0c
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x14 function 0x00: vendor 0x8086 device 0x9c31
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x16 function 0x00: vendor 0x8086 device 0x9c3a
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x1b function 0x00: vendor 0x8086 device 0x9c20
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x1c function 0x00: vendor 0x8086 device 0x9c14
Intel Corporation Device unknown
pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x10ec device 0x8168
Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
pci bus 0x0000 cardnum 0x1c function 0x03: vendor 0x8086 device 0x9c16
Intel Corporation Device unknown
pci bus 0x0002 cardnum 0x00 function 0x00: vendor 0x10ec device 0xb723
Realtek Semiconductor Co., Ltd. Device unknown
pci bus 0x0000 cardnum 0x1c function 0x04: vendor 0x8086 device 0x9c18
Intel Corporation Device unknown
pci bus 0x0003 cardnum 0x00 function 0x00: vendor 0x10de device 0x1341
NVIDIA Corporation Device unknown
pci bus 0x0000 cardnum 0x1d function 0x00: vendor 0x8086 device 0x9c26
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x1f function 0x00: vendor 0x8086 device 0x9c43
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x1f function 0x02: vendor 0x8086 device 0x9c03
Intel Corporation Device unknown
pci bus 0x0000 cardnum 0x1f function 0x03: vendor 0x8086 device 0x9c22
Intel Corporation Device unknown
Also Device Driver Utility report is attached
Regards
Amin

Sorry, we don't have currently a driver for the Realtek RTL8723BE component.

Need to export windows 7 x64 builtin printer driver to a x86 print server

Hi,
We're planning our migration to windows 7 x64. But our environment doesn't have a x64 server neither a Server 2008; we only have x86 server 2003.
We are having trouble with printer Konica Minolta Bizhub 161f. I spoke with Konica support, they advised me they do not have a x64 driver for this model yet. The tech told me i can use the
HP LaserJet Family PCL5 driver built-in windows 7. I connected the network printer and selected the built-in driver from the list. So far this works as a charm.
Here's my concern, in order to upload x64 drivers to a 32bit server, i need to first to connect the printer from the print server to my x64 computer. But when i try this, i don't have the
prompt to select a driver from win7 built-in drivers. When i choose connect to... it asks me to locate a INF file on my computer. I don't have the INF file since its built-in windows. I tried to look within Windows's file system, under "Windows\INF\" but i
couldn't find what i need.
1. How can i export or find a built-in driver file within windows 7?
2.Is there is a better way to upload x64 drivers to a 32bit Server 2003?
Any help would be greatly appreciated.
Thanks
Regards,
Benoit

Hi Benoit,
Thanks for the post.
Here is how we find the built-in driver file within Windows 7:
1. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows X64\Drivers\Version-3\{Printer Driver Name}, in the right panel, check the value of "InfPath". Now we will get the specific path of INF file.
2. On a x32 Win2k3 server
Click on Start, Control Panel
Double click on Printers
Press the ALT button
or
Click on Organize, Layout, Menu Bar
Click on File, Run as administrator, Server Properties...
Click on the Drivers tab
Click on Add...
Click on Next
Uncheck the 'x86 Type 3 - User Mode'
Check the 'x64 Type 3 - User Mode'
Click on Have Disk...
Click on Browse... (to the x64 Win7 machine)
\\X64Win7\c$\windows\system32\driverstore\filerepository\prn*.inf_{GUID}
For example:
\\X64Win7\c$\windows\system32\driverstore\filerepository\prnhp001.inf_5fecfc5e\prnhp001.inf
Click on Open
Click on Ok
Under "Printers"
Select the print driver that you want to install
Click on Next
Click on Finish
Now you should be able to see the x64 print drivers installed under the "Processor" column.
Click on Close
In this case, we need to pay attention to the match of INF file name. As the Konica Minolta Bizhub 161f 32-bit printer driver has been installed on Windows Server 2003, but you try to install HP LaserJet Family PCL5 64-bit printer driver. The two INF files
will not be the same, which causes the x64 driver can be instaled as an additional driver. So we need to change the INF file name to match the 32-bit one. I cannot guarantee that the method can totally work on this case as it may involve some custom settings
from printer manufacturer. If needed, I suggest you contact Konica Support when you go through it.
Hope this helps.
Miles
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Need SM Bus Controller Driver for A75-S231

Unfortunately I am without my system and backup disks and I am in desperate need of a driver for the SM Bus Controller. Problem surfaced after re-install of XP Home.
I called Toshiba tech support to identify the motherboard chipset shipped with my unit (specs listed at end of post) so as to locate and download the driver. Unbelievably, Tech is not equipped to identify the make or model of my motherboard or identify the chipset. Third Party software tells me I have a Toshiba EDW10 Motherboard and tech searched the internet and told me I have some VIA motherboard and good luck finding your driver.
Please help, I didnt think that Toshiba of all people would be unable to identify their own systems but here I am 4 hours later bothering you good people and still hunting. Does anyone have the SM Bus controller driver for the A75-S231 or tell me what chipset was shipped with my unknown motherboard?
My system specs are as follows:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 2 Build 2600
System Manufacturer TOSHIBA
System Model Satellite A75
System Type X86-based PC
Processor x86 Family 15 Model 4 Stepping 1 GenuineIntel ~3333 Mhz
Processor x86 Family 15 Model 4 Stepping 1 GenuineIntel ~3333 Mhz
BIOS Version/Date TOSHIBA V1.30, 9/10/2004
SMBIOS Version 2.31
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
Total Physical Memory 512.00 MB
SM Bus Controller Device ID (from Device Manager) PCI\VEN_1002&DEV_4353&SUBSYS_FF001179&REV_18\3&61A AA01&0&A0
Motherboard Toshiba EDW10???
Thanks fo your help.

Hi
As far as I know your unit must be an US notebook model and please try to check Toshiba US download page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
Please dont be mad on tech support but I dont see any reason why they should know every technical detail of your notebook. Toshiba has designed drivers for every hardware component that you can have anytime you want and install it 1000 times if you want. Toshiba guarantee that it will work properly and I dont see any problem there.
Technical details you can get from Authorized service partners in your country.
Good luck!

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

WES 7 OSD standalone (works) vs bootable (fails) - Failed to find suitable device driver for device (help)

Hi everyone,
I'm trying to deploy a Windows Embedded Standard 7 (trial key at the moment) image in SCCM 2012 SP1 with a very simple task sequence.
I have a 'build and capture' and an OSD TS. I'm testing these on Hyper-V PCs and both work fine when i create stand alone media. The problem arrises when I try to deploy (or build & capture) with a bootable media;
The TS starts, formats the disk, applies the OS, Windows and network settings, Apply Device Drivers etc., but when it reboots into Windows
(or WES7 to be exact) it cant boot. The Windows Boot Manager reports a 0xc0000359 for storvsc.sys
And I can't figure out what's wrong. I will post the SMSTS log further down below. The SAME TS works fine when it's a stand alone media.
I have tried to:
- Apply the WIM manually (nothing wrong - boots fine)
- Create and apply driver package for the Hyper-V machines (from the MSI's Windows5.x-HyperVIntegrationServices-x86 and Windows5.x-HyperVIntegrationServices-x64)
- No dice
- Create a new boot image with the hyper-v drivers in it. No dice
- Google everything related I can think of.
I suspect it has something to do with the lines where it says:
"Failed to find a suitable device driver for device xxx”
It also has a couple of 401 errors when trying to get the packages, but it seems like it DOES end up getting the content.
Please help! What could it be?
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
SMSTS log key points are (the log is too long to post here):
401 - Authentication failure on request with anonymous access, retrying with context credentials.
OSDDriverClient
5/6/2014 4:03:41 PM     612 (0x0264)
401 - Authentication failure on request with context credentials, retrying with supplied credentials.
OSDDriverClient
5/6/2014 4:03:41 PM     612 (0x0264)
Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/s3cap.inf to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\s3cap.inf
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vmbusvideo.cat to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vmbusvideo.cat
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vms3cap.sys to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vms3cap.sys
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Download done setting progress bar to 100
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) VerifyContentHash: Hash algorithm is 32780
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Installing driver "Microsoft Emulated S3 Device Cap"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Adding "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to Windows driver store.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting %SystemRoot% to "C:\WINDOWS"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Getting namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" for architecture "amd64"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Added list item with key value '1'
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Writing configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Successfully saved configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting temporary directory to 'C:\_SMSTaskSequence\PkgMgrTemp'.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Calling Package manager to add drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:41 PM    612 (0x0264)
Command line for extension .exe is "%1" %*
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Set command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM    612 (0x0264)
Executing command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM    612 (0x0264)
Process completed with exit code 0
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Dism successfully added drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:45 PM    612 (0x0264)
Successfully added "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to the Windows driver store.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Successfully installed driver "Microsoft Emulated S3 Device Cap".
OSDDriverClient
5/6/2014 4:03:45 PM    612 (0x0264)
Entering ReleaseSource() for C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) reference count 1 for the source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA before releasing
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Released the resolved source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{57164F39-9115-4E78-AB55-382F3BD5422D}\{FD149E91-82E0-4A7D-AFA6-2A4166CBD7C0}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Intel 82443BX Pentium(R) II Processor to PCI Bridge'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Generic Monitor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{A9A0F4E7-5A45-4D96-B827-8A841E8C03E6}\{242FF919-07DB-4180-9C2E-B86CB68C8C55}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Numeric data processor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{35FA2E29-EA23-4236-96AE-3A6EBACBA440}\{2450EE40-33BF-4FBD-892E-9FB06E9214CF}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Microsoft System Management BIOS Driver'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'CD-ROM Drive'.
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Exiting with return code 0x00000000
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264)
In advance: Sorry...

Hi,
0xc0000359 for storvsc.sys
Looks like Hyper-v Storage Controller driver issue.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Need to compile nvidia driver for a custom kernel [SOLVED]

I compiled a custom kernel following this wiki page: http://wiki.archlinux.org/index.php/Ker … rom_Source
I can boot into it just fine. I now want to compile an nvidia driver for use with it and followed the steps on this wiki page: http://wiki.archlinux.org/index.php/NVI … tom_kernel
I run into a problem when makepkg trys to compile it. Here is the output:
$ cd ~/devel/abs/nvidia/
$ makepkg -c
==> Making package: nvidia-my 190.42-1 x86_64 (Thu Nov 5 17:42:29 EST 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found NVIDIA-Linux-x86_64-190.42-pkg0.run in build dir
==> Validating source files with md5sums...
NVIDIA-Linux-x86_64-190.42-pkg0.run ... Passed
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
Creating directory NVIDIA-Linux-x86_64-190.42-pkg0
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 190.42..................................................................................................................................................
If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.
If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.
Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
*** Unable to determine the target kernel version. ***
make: *** [select_makefile] Error 1
==> ERROR: Build Failed.
Aborting...
The step it's choking on is (from the PKGBUILD), "make SYSSRC=/lib/modules/${_kernver}/build module || return 1"
What am I doing wrong?
My PKGBUILD:
pkgname=nvidia-my
pkgver=190.42
_kernver='2.6.32-rc6-MINE'
pkgrel=1
pkgdesc="NVIDIA drivers for kernel26."
arch=('i686' 'x86_64')
[ "$CARCH" = "i686" ] && ARCH=x86
[ "$CARCH" = "x86_64" ] && ARCH=x86_64
url="http://www.nvidia.com/"
depends=('kernel26>=2.6.31' 'kernel26<2.6.32' "nvidia-utils=${pkgver}")
conflicts=('nvidia-96xx' 'nvidia-173xx')
license=('custom')
install=nvidia.install
source=("http://download.nvidia.com/XFree86/Linux-$ARCH/${pkgver}/NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run")
md5sums=('f94806feee87de756d14fe3e9bcaf05a')
[ "$CARCH" = "x86_64" ] && md5sums=('ae431ff849ec01446e6724f9fcfe3bb4')
build() {
cd $srcdir
sh NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run --extract-only
cd NVIDIA-Linux-$ARCH-${pkgver}-pkg0
cd usr/src/nv/
ln -s Makefile.kbuild Makefile
make SYSSRC=/lib/modules/${_kernver}/build module || return 1
mkdir -p $pkgdir/lib/modules/${_kernver}/kernel/drivers/video/
install -m644 nvidia.ko $pkgdir/lib/modules/${_kernver}/kernel/drivers/video/
sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/nvidia.install
My nvidia.install
post_install() {
KERNEL_VERSION='2.6.32-rc6-MINE'
depmod $KERNEL_VERSION
post_upgrade() {
post_install
rmmod nvidia || echo 'In order to use the new nvidia module, exit Xserver and unload it manually.'
post_remove() {
KERNEL_VERSION='2.6.32-rc6-MINE'
depmod $KERNEL_VERSION
Last edited by graysky (2009-11-07 10:54:33)

Hello,
I'm kind of a noob and am trying to get follow the directions from the Nvidia wiki on installing on a custom kernel. I'm trying to use the abs method to install on kernel26rt version 2.6.33rt. I followed directions exactly and am getting an error that I didn't find on any other posts. Can you please take a look? Here is my terminal:
[jsadural@jlinux nvidia]$ makepkg -ci
==> Making package: nvidia-2633rt 270.30-3 (Wed Mar 30 08:53:08 PDT 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading NVIDIA-Linux-x86_64-270.30-no-compat32.run...
--2011-03-30 08:53:08-- ftp://download.nvidia.com/XFree86/Linux … mpat32.run
=> “NVIDIA-Linux-x86_64-270.30-no-compat32.run.part”
Resolving download.nvidia.com... 69.31.121.43
Connecting to download.nvidia.com|69.31.121.43|:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD (1) /XFree86/Linux-x86_64/270.30 ... done.
==> SIZE NVIDIA-Linux-x86_64-270.30-no-compat32.run ... 30037601
==> PASV ... done. ==> RETR NVIDIA-Linux-x86_64-270.30-no-compat32.run ... done.
Length: 30037601 (29M) (unauthoritative)
100%[======================================>] 30,037,601 696K/s in 42s
2011-03-30 08:53:50 (696 KB/s) - “NVIDIA-Linux-x86_64-270.30-no-compat32.run.part” saved [30037601]
==> Validating source files with md5sums...
NVIDIA-Linux-x86_64-270.30-no-compat32.run ... Passed
==> Extracting Sources...
==> Starting build()...
Creating directory NVIDIA-Linux-x86_64-270.30-no-compat32
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 270.30........................................................................................................................
NVIDIA: calling KBUILD...
test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\
echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo; \
/bin/false)
mkdir -p /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.tmp_versions ; rm -f /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.tmp_versions/*
make -f scripts/Makefile.build obj=/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel
cc -Wp,-MD,/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.nv.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.2/include -I/usr/src/linux-2.6.33-rt/arch/x86/include -Iinclude -include include/generated/autoconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=2048 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fno-dwarf2-cfi-asm -fconserve-stack -I/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"270.30\" -Wno-unused-function -mcmodel=kernel -mno-red-zone -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.o /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c
In file included from /usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess.h:573:0,
from include/linux/poll.h:13,
from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:84,
from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:13:
/usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess_64.h: In function ‘copy_from_user’:
/usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess_64.h:35:6: warning: comparison between signed and unsigned integer expressions
In file included from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:13:0:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h: At top level:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:251:35: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘nv_spinlock_t’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:1436:5: error: expected specifier-qualifier-list before ‘nv_spinlock_t’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_alloc_file_private’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1993:5: error: implicit declaration of function ‘semaphore_init’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1994:5: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1995:5: error: implicit declaration of function ‘atomic_spin_lock_init’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1995:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_poll’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2790:30: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2793:5: error: implicit declaration of function ‘atomic_spin_lock_irqsave’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2793:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2804:5: error: implicit declaration of function ‘atomic_spin_unlock_irqrestore’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2804:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_close_registry’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3595:18: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3611:22: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_write_registry’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3703:51: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3710:45: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3720:9: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_post_event’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4330:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4347:5: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4348:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_get_event’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4362:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4365:9: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4390:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
make[3]: *** [/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.o] Error 1
make[2]: *** [_module_/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel] Error 2
NVIDIA: left KBUILD.
nvidia.ko failed to build!
make[1]: *** [module] Error 1
make: *** [module] Error 2
==> ERROR: A failure occurred in build().
Aborting...
thanks,
jason

I need to download 11g for Solaris10 x86

sorry for easy question.
I hope to install Oracle 11g on Soalris 10 x86 with VMware.
but I can't finding for a 11g x86.
Where can I do that?

user3531902 wrote:
sorry for easy question.
I hope to install Oracle 11g on Soalris 10 x86 with VMware.
but I can't finding for a 11g x86.
Where can I do that?You can not find it because it is not available. And, apparently it will not become available.
According to information, you will need to wait until Oracle releases 11gR2 for Solaris x86. Unfortunately we have no date for that.

No driver for system speaker dv9823em Vista 32 SP2 D E

No driver for system speaker dv9823em Vista 32 SP2
NO Audio Output Device Istaled ## i instaled   KB979482)   that help but work 1 day and tan again no voice , i think that is sabtage ,
i talking about Hight definition Conexant Audio , ( Smart Audio Studio 2.23.0.0 not working )
1/ all is fine , but i think System speaker can you update , system said all is fine )) but in finaly you have not driver , and driver is not loaded ,
Hight Definition colector , Hight Definition Audio device ,
if was all ok , Hight Definition Audio device , has driver , 32\drivers\drkm.sys , 32\drivers\Hdaudio.sys , 32\drivers\portcls.sys , 32\sysFxUI.dll , system32/WMALFXGHXDSP.dll
Mirrosoft said that System Speaker need new driver and i must check fabric )) i did https://www.conexant.com/Product/Audio/pchdaudio/Pages/default.aspx
but there is not one file wich has maybe 44 KB before was oem28.inf not working or  WiSVHe5.inf
i loosed my DVD i have new as USB Se-208 , but i need Signal , some program saying that i have Signal Audio ,
Problem 2 , if i instaled REALTEK all was fine but in Finaly after 5 min istaling driver he said that have not Diriver fr MEDIA ))))
i think all this problem make Cyberlink , i can delte all HP QUCK due he Cyberlink as all deal in Registry own Directory
if somebody know how make tis deal i need VOICE , if somebody has instaled in dv9823em Unbutu 12.04 multiarch , i will be appy if you send me driver for Ateros , chips , and System Speaker or wirelessN 150 , N10 , i will be happy , maybe UBUNTU will be better , rudolfsindelar AT msn DOT com

3 february 2014
HI ,
Vista 32 , SP 2
SOUND problem :
ACPI x86 based // NO conected
Nvidia n Force PCI managnent // NO conected
Battery disaper in icon screen : i disabled Microsoft ACPI compliant control metod #### not help , is same
2x IDE / ATAPI controllers ( mshdc.inf , ms-driver , // NO conected
Microsoft ACPI compliant Embedded controller   // NO conected
ADM Hyper trasport (tm) configuration   // NO conected
ADM Address MAp configuration   // NO conected
ADM DRAM and Hyper transport (TM) trace mode confioguration // NO conected
ADM MIsceleneous configuration // NO conected
2x PCI Standart RAM Contrller // NO conected
higt precision timer    // NO conected
System bord    // NO conected
3x mother board resource   // NO conected
system speaker    // NO conected
PCI BUS !!!!!!!!!!!!!!!!!! Memory Range C0000000 - FEBFFFFF not available.
Moterhboard : Memory summary : Wrong value reported by BIOS
memory type : DDR2 &isntaled memory 3072 MB , available memory 3007 MB , channels 1 ,
MAXIMUM CAPACITY : 2048 MB [ wrong value ]
maximum memory module size : unknow
Memory slots : 2
Error corection : NON
Belarc Advisor
Board: Quanta 30D1 85.26
Bus Clock: 200 megahertz
BIOS: Hewlett-Packard F.34 03/22/2011
3008 Megabytes Usable Installed Memory
Slot 'DIMM 1' has 2048 MB
Slot 'DIMM 2' has 1024 MB
Bus Adapters
Microsoft iSCSI Initiator
Virtual CloneDrive
HUAWEI Mobile Connect - Bus Enumerate Device
Standard Enhanced PCI to USB Host Controller (2x)
Standard OpenHCD USB Host Controller (2x)
Good news :
Hight definition controller HDudbus    // conected
Hight definition AUdio device HDAudAddService (Media )   // NO conected
Hight definition AUdio device HDAudAddService (Media )   // conected
can you send list from device manager all ##system device ##maybe there is not one ,
i will solve today Memory range but that will be pretty hard task )))
you think that will be good idea for my pc ?? #### To resolve this behavior, disable the ISA-to-PCI routing feature to allow these PC Cards to function in laptop computers:
Start Registry Editor (Regedit.exe).
Locate and click to select the following key in the registry:HKEY_LOCAL_MACHINE \System\ CurrentControlSet\Services\ PCMCIA\ Parameters
On the Edit menu, click New, click DWORD Value, type DisableIsaToPciRouting in the NewValue box, and then press ENTER.
Click to select DisableIsaToPciRouting, click Edit, and then click Modify.
In the Value data box, type 1, and then click OK.
Quit Registry Editor.
is applicable ?
Rudolf

Driver for 3com 3c905B Fast Ethernet

Hello,
I was trying to see where I could get
a driver for Solaris 8 Sparc - 3Com 3c905B
for SunBlade
or what ethernet 100 mb network card is suppported in Solaris?
Thanks

I think it is going to be difficult at best.
Glance through the Third-Party drivers link that is on the Solaris HCL page:
http://www.sun.com/bigadmin/hcl/indexRes.html
Keep in mind that most of those links are to driver software
that is to be installed to Solaris-x86.
An example of what you may eventually get to ...
If you do successfully get such a card to work in a SPARC-based system,
it may only function AFTER the OS is fully booted, so it may not be usable as a primary interface.
The 3COM cards work very well in x86 architecture,
but it's a questionable exercise for SPARC systems.

Driver for Creative graphics blaster 3D CLGD5464 pci vga card

Can anyone tell me from where to find the driver for Creative graphics blaster 3D CLGD 5464 pci vga card. The driver in Solaris8 is for CLGD 5465 which is not compatible with my card. The solaris detects my card as CLGD 5465 but it doesent work. Can anyone tell me what should I do about it?
thanks, Kashif ([email protected])

If it is not supported by the Xserver under Solaris you may find you can get it to work by installing XFree86 (www.xfree86.org), there are compiled binaries for Solaris Intel that will make the transition easier (personally I found the 3.3.5 version works well). First check at www.xfree86.org if your videa-card IS supported under XFree though. There are some tweaks you need to add to get it all to work in the Solaris x86 FAQ. Since you probably have to do all of this in non-gui its not easy but can be done.

Sgen driver for Soalris 10 x86

Similar Messages

Maybe you are looking for