SHA512 and 4096 compatibility?

We are going to be replacing our internal Server 2008 CA with a 2 tier 2012 R2 setup with one offline server and one online CA server.
I noticed all the installation guides I saw that were written before the SHA1 debacle last year were suggesting to use the weakest possible SHA1 certificate signing because it was believed SHA256 was overkill.
Every few months for the last several months some new revelation comes out that nobody noticed before (SSL 3.0 determined to be too weak, SHA1 determined to be too weak, everyone "forgot" that export-grade ultra-weak encryption was still enabled
even though there is no reason it should ever be used.  And on and on).  What's going to be next?
So, now SHA256 is the "minimum"  that should be used.  Why keep choosing minimums? Why not just go to SHA 512 now when building a new CA and not have to worry about having to scramble to quickly update and redploy overly weak certificates
again in a few years or maybe less?
Is there a loss of compatability with SHA512 signed certificates?  Does SHA512 work with Windows 7, IE10, EAS 2010 and Lync 2010 ext?

Hi,
Does SHA512 work with Windows 7, IE10, EAS 2010 and Lync 2010 ext?
I wasn’t able to find any reference which could confirm this.
I understand what you want to achieve here, as the way I see it, and you may have noticed too, to build a SHA512 PKI then make necessary clients/applications compatible is way more difficult than build SHA256 PKI at the moment.
Personally, I would suggest you go with SHA256. If you intend to use SHA512 for Microsoft applications, since currently there aren’t many users having tested and deployed it, please contact Microsoft Customer Support and Services where more in depth investigation
can be done so that you would get more satisfying comments.
You may find phone number for your region accordingly from the link below:
Global Customer Service phone numbers
http://support.microsoft.com/gp/customer-service-phone-numbers/en-au
Regarding third party applications, please contact their vendor support to get more efficient support.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Similar Messages

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

    We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
    I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
    "The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
    I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
    Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
    Thanks!!

    I was able to get it to work using your instructions off of here and your other thread
    Thank you!
    Chris
    http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

  • IPhoto 6 and Camera Compatibility

    I recently upgraded my OS to 10.5.8 from 10.4... I know very late. I had no intention until the upgrade to my iPhone 3GS required it. Regardless, I am running IPhoto 6.0.6 and it has worked fine. I own a Canon T1i EOS Rebel digital camera. Up until the conversion to Leopard, I would plug the camera into the port and iPhoto would open up and transfer the pics without an issue. Today, I tried to upload pictures, the USB cord was secure on both sides and nothing happened. I turned the camera on and off twice to see if by starting it up connected would change things, nothing did. I ensured that the battery is charged in the camera and that the sleep setting was not tampered with thus not allowing it to transfer.
    I am suspicious about the upgrade to Leopard causing this incompatibility issue with my camera. When I did a search on the apple website, the page about iPhoto 6 and camera compatibility is a dead link. So a couple of questions if someone would be kind enough to help me out with:
    1) Is the import of pictures not occuring because of an incompatibility issue between my camera and iPhoto 6 suddenly? Or is incompatibility between 10.5.8 and iPhoto 6?
    2) What is the best solution? Upgrade to iLife '11? Or will that require upgrading to Snow Leopard as well? Or is it better to buy the $129 bundle of Snow Leopard, iLife and iWork for compatibility issues?
    3) Lastly, is there a webpage on apple that shows these compatibility issues? For instance, if I upgrade one thing in the future, all the other software suites that need updating as well?
    Thanks in advance to whomever can help me.
    Cheers,
    -Tod

    1) Is the import of pictures not occuring because of an incompatibility issue between my camera and iPhoto 6 suddenly? Or is incompatibility between 10.5.8 and iPhoto 6?
    Neither. The usual cause for this issue can be a damaged plist file, a setting on the camera or Mac or minor directory damage on the card.
    Plist file: Can you access the card with Image Capture (in your Applications Folder)? If so, you might try trash the iPhoto plist file, if not try trash the Image Capture plist file as well.
    Settings: What's set to happen when you connect the camera? With iPhoto 6 that's in the Image Capture. Your camera has two modes for talking to the Mac: Mass Storage and PTP. What one are you set to? Try the other one.
    Directory Damage: Have you tried using a USB Card Reader? Can the Mac see the card in that?
    Regards
    TD

  • Info regarding Diswarrior 4 and Leopard compatibility

    I emailed Alsoft regarding Diskwarrior 4 and Leopard compatibility. Here is the response I got.
    +DiskWarrior 4.0 will successfully rebuild a disk that has Mac OS X 10.5+
    +Leopard installed or a disk that has been attached to a computer running+
    Leopard.
    +However, some operating system functionality has changed within Leopard+
    +itself. As such, there are some compatibility issues when running an+
    +installed copy of DiskWarrior 4.0 while started up from Mac OS X 10.5+
    +Leopard. Alsoft currently recommends that you do not run DiskWarrior 4.0+
    +while the computer is started from Mac OS X 10.5 Leopard.+
    +Instead, to run DiskWarrior, you should start up the computer from either:+
    +1) A DiskWarrior 4.0 CD.+
    +2) Any disk that starts up in 10.4.x and then run DiskWarrior 4.0.+
    +An updated version of DiskWarrior that has complete Leopard+
    +compatibility will be released soon as a free download for existing+
    +owners of DiskWarrior 4.0.+
    +-- What you can expect when running DiskWarrior 4.0 under Mac OS X+
    +10.4.x and rebuilding a Leopard disk.+
    +All features work as expected with one exception: FileVaults created+
    +while started from Leopard are not visible to DiskWarrior 4.0 and cannot+
    +be rebuilt (repaired).+
    +-- What you can expect when running DiskWarrior 4.0 under Mac OS X 10.5+
    +and rebuilding a Leopard disk.+
    +While not recommended (and discouraged), if you do run DiskWarrior 4.0+
    +while started from Mac OS X 10.5 you might encounter some problems such as:+
    +1) There is a lengthy delay whenever DiskWarrior is determining which+
    +drives are currently attached. This delay is dependent upon the number+
    +of attached drives and may last up to 2 or 3 minutes. You will+
    +experience this delay when first starting DiskWarrior, whenever a disk+
    +is attached or detached while DiskWarrior is running but idle, and+
    +whenever a rebuild is completed or canceled.+
    +2) You cannot rebuild FileVaults or disk images.+
    +3) In step 9 (comparing directories) of a rebuild, the progress bar+
    +might get to 100% even though the comparison step is not finished.+
    +4) When performing Check All Files and Folders the progress bar might+
    +get to 100% even though the check is not finished.+
    +5) After rebuilding a disk, DiskWarrior may report that some files or+
    +folders have had their permissions changed. This is inaccurate and the+
    +permissions have not been changed.+
    +To repeat, an updated version of DiskWarrior that has complete Leopard+
    +compatibility will be released soon as a free download for existing+
    +owners of DiskWarrior 4.0.+
    +-- What about DiskWarrior 3?+
    +DiskWarrior 3 and earlier versions are not compatible with Mac OS X 10.5+
    +(Leopard). Alsoft does not recommend running DiskWarrior 3 or earlier on+
    +a disk that has Mac OS X 10.5 Leopard installed or a disk that has been+
    +attached to a computer running Leopard.+
    +-- Marc+
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    +Marc Moorash, Alsoft Technical Support+
    +Email: [email protected]+
    So, it seems it will work but you need to run it from the disk or if you have it installed on a external drive running Tiger, it will work.
    Thom

    If you open your Tiger Address Book, select all cards, drag them to the desktop, it will make one big "mega-VCF" card with a name like "Alan Adams and 543 others.vcf" Dump that to a flash drive or email it to yourself, then doubleclick on it on the Leopard machine. They will all import just fine into your Leopard Address Book.
    Try doing something similar with your iCal data, Open the application, choose your calendars one at a time, and select File > Export. That should make a big "mega-ics" calendar card with a name like "work.ics" or "home.ics, i.e., "originalcalendarname.ics" with all the events of that calendar. Then same drill: dump that to a flash drive or email it to yourself, then doubleclick on it on the Leopard machine.
    Both generation methods create text files, which should import just fine into the Leopard applications.

  • Seagate ST9750420AS HDD and W700ds compatability issue

    There seems to be a compatability issue with the Seagate 750GB drives (ST9750420AS) and the W700ds (and possibly other W series notebooks).
    With the controller set to RAID in BIOS Windows 7 and possibly other OSs can not access the HDDs. This configuration results in a 7B "inaccessable boot device" error BSOD.
    Testing revealed only the ST9750420AS with FW 0001SDM5 (the only FW avaible) results in the 7B BSOD regardless of the RAID driver version installed. I have not phiscally removed the Turbo memory device to see if it plays a role in the problem or not.
    The W700ds (2757) system I have available to test is compatable with the following Seagate (drives with various FW versions):
    ST9160823ASG
    ST9500325AS
    ST9500420ASG
    ST9500420AS
    ST9640320AS
    These were tested with Widows XPP 32bit, Windows 7 64bit and Linux 64 bit, these were tested in both RAID and non RAID configurations.
    And not compatable with:
    ST9750420AS, tested with Windosw 7 x64 in RAID configuration.
    Any comments, corrections or resolution welcom.
    Thanks
    JMG

    Hi Jamessts,
    Welcome to the HP Forums!
    I have read your post on installing your HDD to your HP computer, and I would be happy to be of assistance!
    To determine your product specifications, I will need to know what the Product and Model Number of your desktop is. The next piece of information I will need is the version of Windows you have on your computer.
    Since you stated that the HDD works in another computer, I suggest following this resource: "Windows could not complete the installation..." solved by MarkBeacom. This should help in setting up your HDD for use on your computer.
    Please post back with the results of your troubleshooting, and I will diligently follow up with you!
    Cheers
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • [solved] Dependency hell with redland and redland-compat

    It seems that redland and redland-compat are in conflict, but both are required.
    I notice that the installed version of redland-compat provides redland, but the new version does not.
    $ pacman -Qu
    redland-compat 1.0.12-1
    skype 2.1.0.81-5.1
    $ sudo pacman -Su
    :: Starting full system upgrade...
    warning: skype: ignoring package upgrade (2.1.0.81-5.1 => 2.2.0.25-1)
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: audacity: requires redland
    :: libreoffice: requires redland
    $ sudo pacman -S redland
    resolving dependencies...
    looking for inter-conflicts...
    :: redland and redland-compat are in conflict. Remove redland-compat? [y/N] y
    error: failed to prepare transaction (could not satisfy dependencies)
    :: redland-compat-storage-virtuoso: requires redland-compat
    :: soprano: requires redland-compat
    Last edited by jlindgren (2011-04-28 03:41:39)

    sl1pkn07@sL1pKn07 pacman.d]$ yaourt -S redland
    Contraseña:
    resolviendo dependencias...
    verificando conflictos...
    Objetivos (2): rasqal-0.9.25-1 [0,22 MB]  redland-1.0.13-1 [0,18 MB]
    Tamaño total de descarga:   0,00 MB
    Tamaño total instalado:   3,44 MB
    ¿Continuar con la instalación? [S/n] s
    (2/2) verificando la integridad de los paquetes                                                                                                [---------------------------------------------------------------------------------------] 100%
    (2/2) verificando conflictos entre archivos                                                                                                    [---------------------------------------------------------------------------------------] 100%
    error: error al realizar la transacción (archivos en conflicto)
    redland: /usr/lib/librdf.so.0 existe en el sistema de archivos
    redland: /usr/lib/librdf.so.0.0.0 existe en el sistema de archivos
    [sl1pkn07@sL1pKn07 pacman.d]$ yaourt -Qo /usr/lib/librdf.so.0
    /usr/lib/librdf.so.0 es propiedad de redland-compat 1.0.12-3
    [sl1pkn07@sL1pKn07 pacman.d]$
    sorry. menssage in spanish

  • RosettaNet and its Compatability with C-folders

    Can I please get some info about RosettaNet and Its compatability with C-folders....
    its urgent
    regards
    jay

    I would imagine since SEEBURGER is involved in integration solutions
    <i>For 20 years, SEEBURGER has been the expert in SAP business integration. More than 1,200 SAP customers both large and small – utilize our B2B/EDI solutions and expertise to connect with their applications and trading partners.</i>
    http://www.seeburger.com/index.php?id=sap&no_cache=1&sword_list[]=SAP
    Unfortunately I have no way of testing but perhaps someone will see the new activity in the thread and pop in.

  • Backwards and upwards compatibility on essbase, EAC and Analyzer

    we have running essbase/analyzer/EAC 7.1 environment and a running essbase/planning 9.3.1 environment.
    It occurs to us that modifying the 9.3.1 environment with the EAS7.1 tool results in a essbase crash (without any information in the essbase log files).
    Is there any information for essbase about upwards and backwards compatibility from 7.1 and 9.3.1.
    Message was edited by:
    Detlev

    In addition to Nathan's comments this would be a platform that Oracle hasn't regression tested. So even if it were to appear to work if you encountered an issue Oracle would be justified and asking you to re-create the same issue on a supported platform.
    In my opinion if this is a production application this is a risk you should not take.
    If you are playing with an internal environment and want to learn more about Win2K8 that's one thing. Realizing most folks will give you the "It's not supported line" when you start asking why EPMA, FDM, and HFM do not work with IIS 7.x
    Regards,
    John A. Booth
    http://www.metavero.com

  • Pages v5 and v4 compatibility

    I just installed Pages 5.5.2 after working in Pages 4.3 for the last three years... no wonder everyone is giving 5.5 such a bad rap (refer to the number of 1-star-I-hate-it votes on the App Store).
    My problem is Pages v4.X and Pages v5.X compatibility - I opened an existing file created in v5.2.X and exported the document so it can be opened in an earlier version of Pages (File > Export to > Pages '09)  it did not work, when I tried to open the exported file in Pages4.3 I get the error "This document couldn't be opened" (great error message Apple, no really, it's packed with lots of information to assist me to overcome my problem!) On the other hand, I created a Pages5.5.2 document and repeated the process (File > Export to > Pages '09), and hey presto I can open the file in Pages4.3. Also, I open a file created in 4.3 in Pages5.5.2 and the formatting goes awry - facing pages defaults to single, alignments skewed, floating elements misaligned. Every page and floating element needs to be checked (some are missing).
    My colleagues and I are struggling to open Pages documents created in one version and exported to be opened in another version (I refer to the error above). I'd like to hear if others are having the same problem and what they have done to rectify the issue. My preference would be to downgrade everyones version of Pages to 4.3. Is this possible? (We have OS versions which vary across the gamut 10.10 down to 10.6)
    Thanks in advance

    Hi stutteringfish,
    Wayne Contello has written a User Tip for working with the old and new versions of iWork.
    Need newer version of Numbers to open file
    That applies to Pages as well as to Numbers
    The trick is to drag icons for both versions to your Dock. Right click or control click on each and Options > Keep in Dock. That puts you in charge of which version you launch.
    Here is a screen shot of both Pages icons on my Dock.
    Pages 4.3 (Pages '09) on the left (ink bottle).
    Pages 5.2.2 on the right (orange header).
    Both versions will run happily together. Just be sure which version is opening your document.
    Instead of double clicking the document, run whichever version of Numbers/Pages/Keynote suits and use File > Open.
    Regards,
    Ian.

  • WLC 5508 and 5760 Compatibility

    Hi, 
    We have 5508 WLC and adding a new 5760..
    is it possible for this 2 to be in the N+1 model?
    If the 5508 WLC goest down, does the AP previously associated to 5508 need to re-download the image to join 5760?
    Or as long as it's running within the following compatibility matrix, The AP wouldn't need to re-download?
    Table 4 Software Compatibility Matrix
    Cisco 5700 WLC
    Catalyst 3850
    Catalyst 3650
    Cisco 5508 WLC or WiSM2
    MSE
    ISE
    ACS
    Cisco PI
    03.03.01SE
    03.03.01SE
    03.03.01SE
    7.6
    7.5
    7.5
    1.2
    5.2, 5.3
    2.0
    03.03.00SE
    03.03.00SE
    03.03.00SE
    7.6
    7.5
    7.5
    1.2
    5.2, 5.3
    2.0
    Thanks for all the answers

    Yes, you can put them in same mobility group.
    To do this you have to enable "New Mobility" feature of your 5508 & configure the mobility between each others.
    Since 7.5.x is deffered only 7.6.x is the option for this. (7.4.x is not supporting this feature). This will enable CAPWAP inter-controller communication instead of EoIP (used by legacy controllers 5508,2504, WiSM)
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Can someone provide HTML and CSS compatibility issues list in IE 12?

    Hi There,
    We recently come to know from our team members that Microsoft going to release Internet Explorer (IE) 12. But there are some compatibility issues with HTML and CSS which can break our web sites. Can someone provide us list of issues that we can face in IE
    12, so that we can work on their resolution.
    Regards,
    Ankush

    Hi,
    http://status.modern.ie
    or
    f12>Console tab>
    document.body.style
    Rob^_^

  • A730 keyboard and mouse compatibility with other machines

    I would like to have a USB keyboard mouse with the machine.  Unfortunately there is not an option for that with this machine.  I would like to sell the k/m that comes with the machine.
    What machines including ones not made my Lenovo would the k/m be compatible with?
    According to the Lenovo support page for the drivers for this k/m the drivers are compatable with various Lenovo machines.
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS031648
    Does that mean the k/m are compatable with those machines?
    Is a certain piece of hardware other than the k/b required for it to work?  If so, is that piece of hardware available after market?
    Machine Type: M90z AIO ; Product: 3091CTO (Custom), CPU: i5-650, Video Card: Intel(R) HD Graphics, Memory: 4.00 GB,
    Network Card: Intel(R) WiFi Link 1000 BGN, OS: Windows 7 Professional 64-bit

    Thank you Assaf for taking the time to install the game to check to see if you got a similar problem
    honestly i'm not sure its my 865PE Neo2 LS or not,it may be a software issue. I'm just guessing because that was a the biggest change in my system before I started to experiance this problem.
    I have experianced this problem with the default windows drivers as well as with logitechs current Mouseware drivers, although i have not tried to install older mouseware drivers
    I've had lockups with CoreCell installed as well as removed.In DirectX 8.1 as well as DirectX 9
    I thought perhaps it might have been my soundcard because prior to buying that I didnt have any problems...so I removed that...but i still got the same problem (although as i type this i realize i didnt uninstall the Audigy software before i tested....hhmmm. I'll have to test that)
    I have noticed it happens more often in OSP/Quake3 (a competition mod) than in plain vanilla Quake3, but it does happen in both.
    One intersting thing i discovered by trying out a Belkin KB with my set up was that when i hit a certain combination of keys it would exec a chat bind i had bound to a whole other key ?!?
    the combination was r + g + spacebar = keypad home
    That particular problem stopped once I went back to original Keyboard. It did stick in my mind however that when playing Q3 i am hitting combinations of keys all the time and that maybe I'm hitting a combination that is problematic for my system. I have not been able to figure out what that combintion is yet (I tried for quite a while ...but was unable to find the correct combination to reproduce the problem )

  • OS, iOS and iTunes Compatibility

    I have some iOS and iTunes updates available, but since all my gear is older, I'm getting hesitant about performing the updates due to compatibility concerns and "end-of-life" issues. I've tried searching out to see what is compatible with what, but for the life of me, I can't seem to find a straight answer anywhere, and I'm generally quite successful in my internetting.
    I currently have a 2GHz Intel Core 2 Duo 17" iMac with OS X 10.7.5, running iTunes 11.1.5 (which wants to update to 12.0.1), which is cross-synced with both an iPhone 4 (with it's final OS of 7.1.2) and an iPad 2 running iOS 7.1.1 (which wants to be 8.1).
    I can't seem to find any reference as to which versions of what are compatible with everything else. If I update iTunes to 12.0.1, will it still work properly with my poor old iPhone? If I update my iPad to 8.1, will it still be compatible with iTunes 11.1.5? If I update my iPad to 8.1, will it cause syncing issues with the older iOS on my iPhone? Any insight would be greatly appreciated.

    I currently have a 2GHz Intel Core 2 Duo 17" iMac with OS X 10.7.5, running iTunes 11.1.5 (which wants to update to 12.0.1), which is cross-synced with both an iPhone 4 (with it's final OS of 7.1.2) and an iPad 2 running iOS 7.1.1 (which wants to be 8.1).
    Nothing is “cross-sync’d”.
    advices are simply sync’d with iTunes.
    If I update iTunes to 12.0.1, will it still work properly with my poor old iPhone?
    Yes.
    If I update my iPad to 8.1, will it still be compatible with iTunes 11.1.5?
    You would now be running iTunes 12.
    If I update my iPad to 8.1, will it cause syncing issues with the older iOS on my iPhone?
    No. iDevices don’t sync with each other.

  • Check on EHP2 and EHP5 Compatibility for Adobe Forms

    Hi,
    Does anyone knows if adobe forms for EHP2 and EHP5 is downward compatible?
    Meaning, the standard SAP adobe forms I have in EHP2 can run as well in EHP5?
    Or appreciate there is any info on the compatibility for sap adobe forms

    Hi Sashu,
    It should be downward Compatible .
    Ranganathan

Maybe you are looking for