Shaded areas on sales order

Greetings. How can I switch on the ability to shade in gray the line items on a sales order that re completed? On sales my sales orders and purchase orders, you can not tell which items are completed, because they are not shaded gray.
Thanks.
NL

Heather,
Yes, once items are invoiced or fully delivered, you can not see the gray areas. I realize the rows will become gray once the full qty is delivered or invoiced. This happens when the user is logged into other workstations. When I log is as myself on the problem workstation, the same happens to me.
I have adjusted, screen resolution, contrast, brightness and even colors, you can not see the gray shaded areas.

Similar Messages

This field cannot be updated as there are open sales order lines

When trying to enable Item Attributes then I am getting a message "This field cannot be updated as there are open sales order lines". I cancelled the Sales Order ( which was having only 1 sales order line and that is also cancelled) but still I am getting the same message.
How to overcome this problem.
Khan

Thanks Karthik & Sandeep........
Issue got fixed. There was an open Sales order Line because of that line the issue was coming. After cancelling that SO Line, Users were able to update the Item field.
Regards,
Khan.
http://moreapps4u.blogspot.com/

Where is credit control Area in sales order.The field.??

Hi all
where is credit control Area in sales order.The field.??
Ahmed

Hi Sadhu,
You may get the wrong infomation if you only checking the credit control area for customer master.
During sales order creation the system determines the relevant CCA. This is done in 4 steps in the following sequence:
1.      Userexit
2.      Credit control area of the payer (XD03)
3.      Credit control area of the Sales Area (OVFL)
4.      Credit control area of the Company Code (OB38)
As far as the system can determine a CCA it leaves the sequence.
So there maybe no credit control area in customer master data for the payer. But if there is one maintained for sales area or company code or in userexit, the sales order can get one CCA determined. I recommand using the check_cm report because it tells you the correct info.
Regards,
Smile

Change sales area in sales order.........?

Hi Experts,
I know that in standard, we can not change the sales area in sales order, but my problem is that suppose when I create a sales order, I dont know that what distribution channel should be taken.
Suppose I create a sales oder taking the distribution channel 'direct sale' but the actual distribution channel is 'dealer'.
Is there any direct or indirect way, so that I can further change my sales area in sales order.
Thanks in advance,
Vishal Singh

Hi
Thee is no way to correct the distribution channel in the order because its copied from the customer master. If you doesn't know the correct one while creating the order just enter the order type and press enter. So that it will take it to creationscreen. Then enter the customer thensystem will give the pop up with all the sales areas that customer was crated. Then select the correct one so that you can rectify the errors.
I hope it will clear.
Regards,
SK

Default Functional Area in Sales Order Line Items

Hi,
Is there any user exit that can be used to default Functional Area in Sales Order Line Items.
I tried mv45afzz but not working. Any idea and do let me know the field or structure effected.
Thanks.

Hi Sathish
You can update table XVBAP from program SAPMV45A in program mv45afzz like code below:
FIELD-SYMBOL: <mytab> LIKE STANDRD TABLE OF VBAP.
   ASSIGN (SAPMV45A)XVBAP TO <mytab>.
   LOOP AT <mytab>.
   ENDLOOP.
I hop it helps .
Kind regards
Carlos Machado

Failing to determine sales area in sales order for many BP's(Sold-To Party)

Hi Experts
In SAP CRM version 4.0, when I enter the Sold-to party (BP) in the sales order transaction, for some it determines the sale area automatically and for most of the BP's it is not determining.
The Determination rule is organizational Model.
The determination rule used is 91000141 (ZORGMAN_RA = Organization based on BP and trans.)
Under Container tab in this determination rule, using simulate Rule resolution button, for some BP, it find the agent with green light when I place a BP in the Container element value field but for many BP's, it shows as No agent found.
Org. data profile used is ZORGPROF_RA (Mandatory are sales Org, Dist. Ch, Sales Off.) and has set the above determination rule.
In the Organizational model, the General attributes are country, currency, dist. Ch & division.
So, Why Org determination is working for some BP and not for all.. I've checked each field in BP transaction comparing those BP where the org detrmination is automatic with those where it is not determining...but not able to find a clue also to trace it.
we are introducting a sales order block in BP (under sales tab) for some specific Sold-To party and in webshop when these Sold-to party are tried to place an order then an error message will show that this "Sold-To party has a sales area block".
To achieve this, first the org determination should work automatically for all BP's otherwise for those BP which cannot detrmine the sales area in the sales order transaction will allow to place order (which should not be in our case)
Can any one throw some light in this case..please do ask if you need more clarification in my question.
Thank & Regards
Pravin Babu

Hello Maggie
Thanks for your reply.
I found the cause of the failure, in not determining the sales area automatically in sales transaction for some BP's.
It is due to the BP settings, under sales area view, under organization tab, by pressing 'Choose sale area" button, I can see the sales Organization has uncheck for 'sales' but it is check for all others - shipping, billing, partner, status, Organization.
It is due to -> no data mainatined for the BP under Sales tab, after mainatianing it, I can see the check by pressing the 'choose sale area under organization tab.
Now, in Order transaction, the sale area is determined automatically when I enter the BP.
So this was the reason that some BP's was able to determine the sales area automatically but not for others in the sales transaction.
Regards
Pravin
Edited by: Pravin Babu on Jul 14, 2010 3:49 PM

User exit or BADI for business area in sales order

Hi,
At present the business area in the sales order is greyed.i want to remove the greyed field and put some input value to the business area when a new sales order is created....
Please suggest the user exits or BADIS
Kanishak
Edited by: Kanishak Gupta on Feb 4, 2010 1:06 PM

Hi Kanishak
You can use userexit userexit_cobl_send_header
If you overule the settings, you will be able to enter business area ( GSBER )
Also, try out:
userexit_cobl_receive_vbak to transfer the screen value entered by the user back to vbak-gsber.
If item level is also necessary you also need :
userexit_cobl_send_item
userexit_cobl_receive_vbap
Hope this helps.
Harsh

Redetermine Business Area in Sales Orders

Hello
I need to re-determine Business Area in already created Sales Orders. Orders are open - not delivered, or invoiced. How to do it?

Dear Friend,
Business Area is determine in Sales order for each line Item automatically based on config setting in Enterprises
Structure in combination of PLANT + Division + Business Area and you can't change the same.
Note: Please make habbit of updating your thread,whether answered or where r u getting stuck.
Regards
AJIT K SINGH
Edited by: AJIT K SINGH on Sep 28, 2010 1:08 PM

Are ERP Sales Orders supported for B2C Web Channel Scenario in CRM 7.0?

Hi Experts,
We are on CRM 7.0 with ECC 6.0 as backend system.
I just want to know whether the third party tax system (Vertex or Taxware) is mandatory for B2C WEB Channel implementation??
Without using a third party tax system, how can we configure tax for B2C web orders?
We have ERP sales order concept in 7.0. Will it support B2C scenario???
Regards,
vasu

Hi Ram,
-- Tax is configured in ECC using conditioni technique. They are not using any third party taxware/vertex system for this.
-- R/3 pricing procedure is intended to use for B2C transactions in Web channel and the pricing procedure refers to tax calculations. Even in B2c also they want to continue with the ECC pricing procedure.
-- The Requirement is to have pricing along with taxes and freight in the webshop, so that the consumers can pay the total amount using credit card as it is only the payment method available in the b2c Shop.
in the document "CAUSTAX_4.0" it was mentioned that use of third party system is mandatory for B2C scenarios. The relevant text is copied below.
As of CRM 3.1 and above, SAP provides a solution allowing you to use SAPu2019s jurisdictional tax method to calculate taxes.
Note: The use of external tax systems remains obligatory for B2C scenarios. However, if you are calculating tax in other scenarios and do not use external tax systems, this solution is applicable.
The solution consists of customizing changes in both R/3 and CRM. Even though you must make some changes in R/3, the basic process of calculating jurisdictional taxes remains the same. In CRM, the Transaction Tax Engine (TTE) calculates tax and you must configure it for the jurisdictional tax method.
My question is can we configure taxes in B2c shop using ECC pricing procedure? If yes, please provide the high level process steps.
thanks in advance
Srinivas
Edited by: Srini Sirasapalli on Jul 6, 2009 12:40 PM
Edited by: Srini Sirasapalli on Jul 6, 2009 12:42 PM

DETERMINE BUSINESS AREA IN SALES ORDER - BADI

Hi,
I wanted to Hardcode a Business area for a specific document type while creating sales order.
Initially the code was added to the userexit to move fields to VBAP but the values added in that code get overriden by the business area determination logic (in FV45PF0V_VBAP-GSBER_ERMITTELN)
This function further calls the following method in the BADI - BADI_SD_SALES_BASIC
- IF_EX_BADI_SD_SALES_BASIC~DETERMINE_BUSINESS_AREA
This BADI has the flag - 'For SAP Internal use' checked.
I am new to BADI's so wanted to know if it is ok to add code to this method and changes the business area in VBAP based on the sales document type.
Thanks
Navdeep Singh

You cannot create an implimentation for a BADI if it says for SAP internal use, you need to look for another BADI or User exit

Business area in sales order

Hi,
We are facing the problem that we will describe next:
When we create a order the field business area it is not available.
Till now the assigning in transaction OMJ7 was enought, in other words
the business area it is assign to a plant. So the business area was
equal to the plant because we assign it on transaction OMJ7 (at least
we are supposing that).
Now, we have the need of making some exceptions in some documents so it
will be useful that the field business area was open for user filling
because we need a diferent business area in accounting.
How can we do that?
We thanks in advance your best efforts to solve our problem.
Best Regards
João Fernandes

Hi Dirk,
Thank you for your answer. It works well but the problem remains.
Now I have the field clear and i fill it ( cobl-gsber = 'MREV'.) in the user exit but when i save the delivery and the billing the field was saved with business area that is in customizing. So i thought that somewhere in the sales process field cobl-gsber is filled again. Should i found another user-exits in delivery area and billing area?
Can you tell me if there is another user exit that can be used?
Meanwhile I will to post another message in the forum in order to find a solution exclusively by customizing means.
Best Regards
João Fernandes

Sales order credit control area

Hi,
How can i identify the credit control area the sales order belongs to?
Is there any way to identify in the SO itself?
(not checking the sales org and checking the cc ar)

Credit Control
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors.
Credit Management
All business have their own credit management needs, SAP allows you to specify your own automatic credit checks based on a variety of criteria. You can also specify at which critical points in the sales and distribution cycle the system carries out these checks.
u2022 SM30 - Table/View
u2022 V_TVTW - Define Distribution Channel
u2022 V_TVTA_KKB - Assign sales area to credit control area
u2022 V_T014 - FI - Define Credit Control Area
u2022 T001CM - FI - Assign Permitted Credit Control Area to company code
OVXG - Set up Sales Areas
e.g. Sales Organization
Distribution Channel
Division
Distribution Channel
Division
FD32 - Customer Credit Management
OVAK - Define credit limit check by sales document type
u2022 Check Credit
o A - Credit limit check and warning message
o B - Credit limit check and error message (no sales order can be created)
o C - Credit limit check and delivery block (block delivery if hit credit limit)
 Options B and C -> used for checking open order values (when you create/change the sales order)
o D - Automatic credit control with open order values
 More control in transaction OVA8 - Automatic credit control
 You check for open orders and deliveries, or just open deliveries.
 or open order values with other options
u2022 Credit group
o Allows you to combine different sales document types for the credit limit check
VKM1 - Blocked SD Documents - Finance have to released the delivery block
OVAD - Define credit limit check by delivery order
u2022 whether the automatic credit check occurs at the time of delivery creation and/or goods issue
OVA7 - Define credit limit check by item category
u2022 Set whether to include/exclude item category for credit limit check
OVA6 - Define credit group. You can groups together different business transactions which should be dealt with in the same manner with regard to the credit check.
You enter the credit groups when you configure the sales document types for credit management and define the (D - automatic credit check).
u2022 SAP default credit groups
o 01 - credit group for sales order
o 02 - credit group for delivery
o 03 - credit group for goods issue
OVA8 - Automatic credit control - Double click on the line items you can have the followings credit limit check:-
u2022 Static
Depends on the customer total value of open orders, deliveries, billing documents and open items.
u2022 Open items
No of days open
Overdue open items checks is based on the ratio of open items that are overdue by a certain number of days.Max open items %
The customer balance must not exceed a certain percentage.
u2022 Oldest open items
If you donu2019t want to deliver to the customer at all when even only 1 invoice is overdue.
Tick the Check for Oldest Open Item and Set the field Days oldest item = 1.Days oldest item
No of days allowed for overdue or payment terms.
Use of the credit check Oldest Open Item. If a user attempts to alter the order quantity of a released sales document
that was previously blocked, it would be reblocked again by the system. The system only reblocks the sales document if the new order quantity is above a certain % amount.
u2022 Released documents are still unchecked
The preset % is whatever you want to set it as when configuring your automatic credit processing. You enter a deviation % and number of days,eg, you can set it so that an order can be changed by up to 10% within 30 days of original order entry date without it going back on credit block.
u2022 Next Review Date
If a customer has a credit limit of 1000 USD, and you would like to restrict this credit limit only to be available in current month (say March). If the document day is in April then the credit limit is zero.You can use the u201CNextReview dateu201D and u201CNumber of daysu201D fields and combined it with the u201CLast int.reviewu201D field in customer credit master u201CStatusu201D view (FD32).
VOKR - Display of work list for credit management (configure the display variant)
Releasing the Credit Block
These are the three transaction code you can used for releasing the SAP credit management block.
VKM3 - Sales Order
VKM5 - Delivery Order
VKM4 - Both Sales Order and Delivery Order
There are basically two types of customers:
1)Credit worthy
2)Normal customers
Coming to credit worthy customers these customers we can believe and we will give some credit ness for them.For such a type of customers we are going to set them some credit limit.Based on that we will give service to them till that limit.It the limit crosses we will get the messages while creating orders for them.
Their credit limit can be set in FD32 T.Code.
Automatic credit check will be maintained in OVA8
Follow these steps:
1. Go to IMG - enterprise structure - definition - financial accounting - define credit control area.
2. Assignment of company code to credit control area & sales area to credit control area.
3. Go to OVAK select ur sales document type and in the check credit column choose from A B or C. D is for automatic credit control for which you have to maintain the credit group and risk categories.
4. In FD32 you select your customer and click on STATUS icon and press enter. here u maintain the credit amount allowed. but this is done by the Finance people.
5. Now when you create the sales order and if the amount exceeds the credit limit then u will get the message as you maintained in the TC OVAK. Normally the system starts doing credit checks from the second sales.
order.
What are the different types of credit checks?
By Sunilmadho
Credit Check can be :
1) Simple Credit Check
2) Automatic Credit Control
Automatic Credit Control can be at various levels :
1) Order
2) Delivery
3) Goods Issue
Automatic Credit Check is of many types :
1) Static
2) Dynamic
3) MaximumDocument Value
4) Maximum Open Items in percentage
5) Oldest Open Item in number of days
6) Crtitical fields change
7) Highest dunning level, etc.
You can create more.
Credit Check happens only in SD module, never in FI. Because the stage of the check is in the sales cycle, which exists in SD. FI guys will check the credit master sheets of the customer, the MIS, the analysis etc, review the credit limits of customers. But the check will happen only in SD, while creating order, delivery or doing the goods issue.
All business have their own credit management needs, SAP allows you to specify your own automatic credit checks based on a variety of criteria. You can also specify at which critical points in the sales and distribution cycle the system carries out these checks.
SM30 - Table/View
u2022     V_TVTW - Define Distribution Channel
u2022     V_TVTA_KKB - Assign sales area to credit control area
u2022     V_T014 - FI - Define Credit Control Area
u2022     T001CM - FI - Assign Permitted Credit Control Area to company code
OVXG - Set up Sales Areas
e.g. Sales Organization
                  Distribution Channel
                              Division
                  Distribution Channel
                              Division
FD32 - Customer Credit Management
OVAK - Define credit limit check by sales document type
u2022     Check Credit
o     A - Credit limit check and warning message
o     B - Credit limit check and error message (no sales order can be created)
o     C - Credit limit check and delivery block (block delivery if hit credit limit)
     Options B and C -> used for checking open order values (when you create/change the sales order)
o     D - Automatic credit control with open order values
     More control in transaction OVA8 - Automatic credit control
     You check for open orders and deliveries, or just open deliveries.
     or open order values with other options
u2022     Credit group
o     Allows you to combine different sales document types for the credit limit check
VKM1 - Blocked SD Documents - Finance have to released the delivery block
OVAD - Define credit limit check by delivery order
u2022     whether the automatic credit check occurs at the time of delivery creation and/or goods issue
OVA7 - Define credit limit check by item category
u2022     Set whether to include/exclude item category for credit limit check
OVA6 - Define credit group. You can groups together different business transactions which should be dealt with in the same manner with regard to the credit check.
You enter the credit groups when you configure the sales document types for credit management and define the (D - automatic credit check).
u2022     SAP default credit groups
o     01 - credit group for sales order
o     02 - credit group for delivery
o     03 - credit group for goods issue
OVA8 - Automatic credit control - Double click on the line items
You can have the followings credit limit check :-
u2022     Static
Depends on the customer total value of open orders, deliveries, billing documents and open items.
u2022     Open items
No of days open
Overdue open items checks is based on the ratio of open items that are overdue by a certain number of days.
Max open items %
The customer balance must not exceed a certain percentage.
u2022     Oldest open items
If you don't want to deliver to the customer at all when even only 1 invoice is overdue.
Tick the Check for Oldest Open Item and Set the field Days oldest item = 1.
Days oldest item
No of days allowed for overdue or payment terms.
Use of the credit check Oldest Open Item. If a user attempts to alter the order quantity of a released sales document
that was previously blocked, it would be reblocked again by the system. The system only reblocks the sales document if the new order quantity is above a certain % amount.
u2022     Released documents are still unchecked
The preset % is whatever you want to set it as when configuring your automatic credit processing. You enter a deviation % and number of days,eg, you can set it so that an order can be changed by up to 10% within 30 days of original order entry date without it going back on credit block.
u2022     Next Review Date
If a customer has a credit limit of 1000 USD, and you would like to restrict this credit limit only to be available in current month (say March). If the document day is in April then the credit limit is zero.
You can use the "NextReview date" and "Number of days" fields and combined it with the "Last int.review" field in customer credit master "Status" view (FD32).
VOKR - Display of work list for credit management (configure the display variant)
In credit mgmt how the Amount & limit can be can be configured at sales order,delivery & PGI Level.
Please give me the solution .
1)First create Credit control area
Path:IMG\ES\Definition\FA\Define Credit Control Area
2) Assign your credit control area to your company code
Path:IMG\ES\Assignment\FA\Assign Company code Credit Control Area
3) And enter the credit limit using above mentioned transaction code FD32.
4) And assign this credit control area in your customer master Sales Org Data (XD02)
5)if you have maintained the credit control area for your customer then goto T.Code FD32.
6)Enter your customer number and the credit control area.
7)Select the status tab.Press enter.
8)Maintain the credit limit in the field.Save.
9)Go to OVA8 T.Code and then click on open orde

Sales order Advance Search Area

Hi,
            In Advance area of sales order application, when i search for records of last week in the time frame, it will fetches the records properly in the ascending order.
            But is there a way to display the records in the descending order by default.
           however if i click on the transactionId then the records will sort in the descending order, but i need this functionality by default.
   Please suggest me how to achieve this functionaloity.
Thanks
Anilkumar

Hi Anil,
This is a standard functionality. By default the search would display the list in ascending order. If you would like to display it in descending order then you will have to click on the column header. The order will be descending.
By default if you want to display the records in descending then you will have to change the code.
Regards,
Hemanth

LSMW - Open Sales Orders

Hello Friends
I want to find if anybody can guide me on how to get all open sales order tables , i want to create a format and create a flat file for uplodading the file , for this what do i need and how do i do it.
Also for creating LSWM can i use the existing one which i can just Assign the New file to the existing one .
Regards.

Dear Mehmood,
I want to find if anybody can guide me on how to get all open sales order tables
You want to extract all the open sales orders- which you can get from Table:VBUP key in overall document status in selection screen ( You can use VBUK also- but if there are certain sales orders in which some of the items are completed or few of them open, using VBUK - you will not get exact records)
Secondly, you can get the data by using Query also- in SQVI
design a query with VBAK / VBAP & VBUP
so that from VBAK you can give time period & sales area details
from VBAP - you can enter plant relevant details to filter certain records & item category as well
where as VBUP- filter wth the status.
once downloaded store in flat file.
Now Create LSMW object by using batch input recording method. after mapping the relevant fields,
prepare the flat file in such a - it suits to the upload file / recording file. then you can upload the already downloaded n stored open sales orders in flat file.
Hope this is what you are looking for.
Regards,
ReazuddinMD

Uploading open sales orders from sap

hi all,
i need to upload open sales orders from legacy to sap. pls advice what steps need to be followed for the same.
1) how we will we download open sales order from legacy and where..... is it to some flat file or some other option is there . pls tell some options.
2) how we will uload the sales ordes into sap . thru lsmw or is there some other option ?
3) there will be more number of fields in sap than in legacy. i think we need to manully create an excel file and add more fields manually in excel file so that the compulsonry feilds as per sap are present in sap ?
4) how will availability check happen in sap after sales order are t/f from legacy ?
rgds
pamela

hi pamela,
1.a. you need to down load in EXCEL in legact format and convert the same in LSMW format and upload it
2.a. LSMW - Functionally, BDC, BAPI - Technically. to my knowledge LSMW is better option.
3.a. first you download to EXCEL file from LEGACY, then align the same to SAP format you can add those fields that are mandatory as per your requriment.
4.a.You are uploading sales orders in SAP which are showing OPEN status from LEGACY before you uploading the sales orders MM consultant would have uploaded its stock through 561 - dont worry on that, even though if stock is not uploaded also not an issue it will confirm at the later date.
5.a. we have used LSMW process for our PREVIOUS ASSIGNMENT, before that we tested BAPI for it some how it was not capturing some fields.
hope all your queries are solved
balajia

Shaded areas on sales order

Similar Messages

Maybe you are looking for