Shading rows within a template

Hi all.
      I am using a template in smartforms. It has two line types. I want to shade the 1st line type and keep the second line type as it is.
      In the template tabstrip, I selected the individual line type and then selected a color from the 'Shading' box. But still I am unable to view the expected o/p in Print Preview.
      Can you help me out with this. Am I forgetting any
step. Please let me know.
Regards,
Abhijeet

Hi,
Click on 'Select Pattern' in Template Tab and pick the required pattern.
Increase the Gray value in Output options.
Save it and Activate it again. Then test it. I am sure you will get it. Some times, you cannot see effect in print preview mode. Better test it with printout.
regards,
ram

Similar Messages

Row and Column Template in Hyperion Reporting

Hi
Whenver I am trying to save a column of a report as a template , it is giving an error :
"The selected columns contain one or more of the items below that cannot be included in templates:
Invalid Input "
I am not sure what does this mean. Though I have already deselected the "Link to Source Object". Can anyone suggest ?

it may also worth cross checking below form doc:
a.If your row and column template contains formulas with external references (for
example, to cells outside of the selected row and column template), you are prompted
to modify those formulas before saving the row or column template.
Note: You can save a row and column template that contains cell formulas, as these can
be discarded. For more information, see step 9.c on page 115.
b. If a secondary database connection was specified within the row and column template,
a dialog box displays prompting you to continue saving the template. If you save the
template, the secondary database connection you specified in the row and column
template is discarded. The primary database connection is then used for the row and
column template.
c. If unsupported properties are found, an Information dialog box presents a list of
properties to discard before saving the template. For example, if the row and column
template contains a cell formula, you can choose to save the template without the
formula or not save the template.

Hyperion Reports - Row and Column templates

Sorry if this may be a bit basic but we are new to Hyperionreports. Currently we are going through a redesign process and washoping to get some viewpoints on the benefits of using row andcolumn templates within reports. I am looking at this option butgetting frustrated by the limitations around formatting, etc Are there any views out there on the preferred options. We havea particular style in design we need to include which is becomingdifficult when we use row and column templates

it may also worth cross checking below form doc:
a.If your row and column template contains formulas with external references (for
example, to cells outside of the selected row and column template), you are prompted
to modify those formulas before saving the row or column template.
Note: You can save a row and column template that contains cell formulas, as these can
be discarded. For more information, see step 9.c on page 115.
b. If a secondary database connection was specified within the row and column template,
a dialog box displays prompting you to continue saving the template. If you save the
template, the secondary database connection you specified in the row and column
template is discarded. The primary database connection is then used for the row and
column template.
c. If unsupported properties are found, an Information dialog box presents a list of
properties to discard before saving the template. For example, if the row and column
template contains a cell formula, you can choose to save the template without the
formula or not save the template.

Can't figure out how to insert an html within my template

I've searched, but perhaps I am not using the correct terminology. I apologize if this has been addressed elsewhere.
We have a vendor who is trying to mimic my webpage for our customers who sign on to her service. My problem is that I don't like having versions of our webpage outside our organization because I'll have to get them to update every time I make a change to our page. I know it will be forgotten at some point. What I'd like to do is set up a page on our site and insert their html content page within my template framework. There is a form that needs to link to their site so it needs to live on their server. I tried inserting an html, but it didn't work. I know in the olden days I used to be able to do this in PageMill. Now, I just can't figure out how to do it. Does anyone know the secret?
Here is a sample page on my site showing what I'm trying to do: http://www.franklinebranch.com/TEST.html. I'm using DW CS5.
Thanks for any suggestions. Anna

That's what I was afraid of. Is IFrame a separate program?
This is the vendor page: https://secure.powerpay.biz/r/fsb.aspx

Need to link text within movie template

Hi all,
I downloaded a flash site template (some time ago) that I'm
just getting round to using. I don't recall if support was offered
when I bought the site. If so, I've long since lost the link to
that support. So, I'm turning here for help.
The site in question is www.plumbingsystems.net. Within the
template there are individual movies. One of these movies is
titled, "Text Area." I don't believe I can actually post this movie
for review but I'm hoping by posting the text layout under
"actions" that someone out there might be able to tell me how this
text can be formatted and, most importantly, if the text can be
linked to other URLs. Specifically, I want to take the text that
makes up the "Client List" text and link some of the client names
to external URLs with photos of the client's work. Here is how the
text appears within the "actions" panel of the Text Area movie:
text = "With decades of experience in commercial and
industrial plumbing, the owner and employees of Plumbing Systems
understand the needs of contractors. We provide expertise with
numerous specialty piping services, reliability in meeting
timelines and a commitment to working within
budget."+newline+newline+"Having worked jobs from 4,000 to 400,000
square feet and covered projects from commercial kitchens to malls
and medical centers, we’re familiar with the challenges of
both large and small scale projects. We can offer up everything
from planning and design of a job, to installation and
maintenance."+newline+newline+"Our ability to handle a project from
planning through completion has allowed us to build long-term
working relationships with some of the country’s top
companies. Take a look at our client list, projects and other
links. We think you’ll see why Plumbing Systems is the
logical choice for contractors looking to partner with success.";
Again, I need to know if/how this type of text can be made to
a live link to a URL. Is this possible? I'd appreciate any help.
This has confounded me, on and off, for a long time with these
types of templates.
Laurie

Thanks!
Robin Kramer
Technical Representative
Dartmouth Printing Co.
603.643.2220 ext 291
603.643.5479 fax
[email protected]

Extra row in input template in BPS

hI EXPERTS
Our business is shared by our company(referred to as 'internal') and some partners(referred to as External). we use web template reporting..so all web reports we have show data on internal and external business.So even in planning reports we have internal planning and external planning.
we have one strange problem in one planning scenario.Until June this year,we had same Target value for both internal and external..so our user used to input one figure in one Input template which inturn will be showed as Target value in both Internal reports and External reports....we are using static webtemplate based reports...
for e.g Sales Target -
10 million (in input template)
but from July,its different target value for internal and external....so my user is giving first Internal figure in Sales Target column in Input template and generating static report for Internal users and then going back to Input template and giving 'external' figure in same Sales Target row in input template and generating static reports for External....so he is doing it two times every month....
he wants to avoid this....he suggested something like have one row for 'Internal Sales Target' and one row for 'External Sales Target' in input template....so he can input different figures in one go and generate reports in one go....
How can I achieve this?I am new to BPS....where do I need to do changes and what care I need to take while doing this...
Thanks alot for your advice..........
Rgds.

Hello polintram,
there are many, many options to solve the issue and it will depend on your data model, the konfiguration of your reports, and so on..
if i understand your example, in your cutrent planning application it´s not possible to save the values permanent. you loose the internal value by overwriting with the external value, because you use the same keyfigure-datamodel!? mhhh... the diffrent values are only stored in the generated reports!?
possible solutions:
1. two diffrent keyfigures - one for internal, one for external - there you will have one row and two columns
2. diffrent character-combinations/ one keyfigure - that means you split your characterdefinition (for example with an infoobject which discrebed the "internal" "external" status)
i think it shouldn´t be a big problem, but it depends on your datamodel and planning layout...
BR david

Drag and drop row within same table.

Version 12.1.2
I am trying to implement drag and drop row within same table, and I am trying to follow this sample from Frank:
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/106-reorder-table-rows-1921121.pdf
But, I am getting this cast exception. The code I have in my dropEvent bean is identical to whats on the sample.
oracle.jbo.server.ViewRowImpl cannot be cast to oracle.jbo.uicli.binding.JUCtrlHierNodeBinding
ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #1
Not sure if anything has changed on 12c release, or if I am missing anything.
Here is my complete code:
public DnDAction doDnD(DropEvent dropEvent) {
RichTable table = (RichTable) dropEvent.getDragComponent();
List dropRowKey = (List) dropEvent.getDropSite();
if (dropRowKey == null) {
return DnDAction.NONE;
Transferable t = dropEvent.getTransferable();
DataFlavor<RowKeySet> df = DataFlavor.getDataFlavor(RowKeySet.class, "rowmove");
RowKeySet rks = t.getData(df);
Iterator iter = rks.iterator();
List draggedRowKey = (List) iter.next();
JUCtrlHierNodeBinding draggeRowNode = (JUCtrlHierNodeBinding) table.getRowData(draggedRowKey);
Row dragRow = draggeRowNode.getRow();
JUCtrlHierNodeBinding dropRowObject = (JUCtrlHierNodeBinding) table.getRowData(dropRowKey);
Row dropRow = dropRowObject.getRow();
//get the table's ADF JUCtrlHierBinding
CollectionModel collectionModel = (CollectionModel) table.getValue();
JUCtrlHierBinding treeBinding = (JUCtrlHierBinding) collectionModel.getWrappedData();
DCIteratorBinding objectsIterator = treeBinding.getDCIteratorBinding();
RowSetIterator rsi = objectsIterator.getRowSetIterator();
int indexOfDropRow = rsi.getRangeIndexOf(dropRow);
dragRow.removeAndRetain();
rsi.insertRowAtRangeIndex(indexOfDropRow, dragRow);
objectsIterator.setCurrentRowIndexInRange(indexOfDropRow);
AdfFacesContext adfctx = AdfFacesContext.getCurrentInstance();
adfctx.addPartialTarget(table.getParent());
return DnDAction.MOVE;
It does not seem to like this line of code:
JUCtrlHierNodeBinding draggeRowNode = (JUCtrlHierNodeBinding) table.getRowData(draggedRowKey);
I would greatly appreciate any help.
Thanks.

Well there has bee a changes somehow. using 12c
table.getRowData(draggedRowKey);
returns a ViewRowImpl and no longer anything which can be convertet to JUCtrlHierNodeBinding. Anyway, the fix is easy:
 public DnDAction onDepartmentsRowDrop(DropEvent dropEvent) {
 //get the table instance. This information is later used
 //to determine the tree binding and the iterator binding
 RichTable table = (RichTable) dropEvent.getDragComponent();
 List dropRowKey = (List) dropEvent.getDropSite();
 //if no dropsite then drop area was not a data area
 if (dropRowKey == null) {
 return DnDAction.NONE;
 //The transferable is the payload that contains the dragged row's
 //row key that we use to access the dragged row handle in the ADF
 //iterator binding
 Transferable t = dropEvent.getTransferable();
 //get the row key set of the dragged row. The "rowmove" string is the
 //discriminant defined on the drag source and the collectionDrop target.
 DataFlavor<RowKeySet> df = DataFlavor.getDataFlavor(RowKeySet.class, "rowmove");
 RowKeySet rks = t.getData(df);
 Iterator iter = rks.iterator();
 //for this use case the re-order of rows is one-by-one, which means that the rowKeySet
 //should only contain a single entry. If it contains more then still we only look at a
 //singe (first) row key entry
 List draggedRowKey = (List) iter.next();
 //get access to the oracle.jbo.Row instance represneting this table row
 Object objdragg = table.getRowData(draggedRowKey);
 Row dragRow = (Row) objdragg;
 Object objdrop = table.getRowData(dropRowKey);
 Row dropRow = (Row) objdrop;
 //get the table's ADF JUCtrlHierBinding
 CollectionModel collectionModel = (CollectionModel) table.getValue();
 JUCtrlHierBinding treeBinding = (JUCtrlHierBinding) collectionModel.getWrappedData();
 //get access to the ADF iterator binding used by the table and the underlying RowSetIterator.
 //The RowSetIterator allows us to remove and re-instert the dragged row
 DCIteratorBinding departmentsIterator = treeBinding.getDCIteratorBinding();
 RowSetIterator rsi = departmentsIterator.getRowSetIterator();
 int indexOfDropRow = rsi.getRangeIndexOf(dropRow);
 //remove dragged row from collection so it can be added back
 dragRow.removeAndRetain();
 rsi.insertRowAtRangeIndex(indexOfDropRow, dragRow);
 //make row current in ADF iterator.
 departmentsIterator.setCurrentRowIndexInRange(indexOfDropRow);
 //ppr the table
 AdfFacesContext adfctx = AdfFacesContext.getCurrentInstance();
 //note that the refresh of the table didn't work when refreshing the table
 //so I needed to refresh the container component (af:panelStretchLayout).
 adfctx.addPartialTarget(table.getParent());
 return DnDAction.MOVE;
does the trick. I changed the line to
//get access to the oracle.jbo.Row instance represneting this table row
 Object objdragg = table.getRowData(draggedRowKey);
 Row dragRow = (Row) objdragg;
so you don't need the detour through the JUCtrlHierNodeBinding any longer.
Timo

Row and Column Template ?

Trying to create this thing but no matter what I do I keep getting this ridiculous error:
Cannot create a linked row and column template based on
the selected rows. The grid needs to have at least one data row that is
not part of a row and column template.
What does this mean?

You can get your requirement done using the Row and Column Template
You can not save a row and column template with all rows in a report. You have to exclude at least one data row, otherwise you
will get the error that you mentioned.
If you want to save all the rows as a template and re-use it in other report, you can insert a data row at the end of all rows and hide that.
Now you can select the complete row set as a template by excluding the extra data row that you will insert & hide.
If you want to link the template in other reports with same row set you must be very careful with the formatting as you need to apply
inherit formatting before saving the template. I suggest to spend some time with the FR online documentation.
Regards
Ram

Show shaded rows in Finder

After a recent update (it might have been to Mountain Lion 10.8.3 last week, I'm not sure), Finder came up and it had alternately shaded rows (shaded, then not shaded, then shaded, then not shaded and so on). It reminded me of the old computer green-bar paper. I liked the look of that as it help distinguish rows when I had Finder in full screen and was showing a long list. The next day I went into Finder and the rows were no longer shaded. All rows were clear/white. I miss what I had and have been unable to find a way to turn that feature back on. Any ideas?

In iPhoto I was able to right-click on single picture or even on an event to show the images in Finder.
Now I see this option in the File menu of Photos, but it's greyed out. Why?
You can only reveal original image files in the Finder, that have been imported as referenced . Files stored inside the Photos Library cannot be revealed in the Finder.
See this Help Page: https://help.apple.com/photos/mac/1.0/?lang=en#/pht1ed9b966d
Store imported files outside the Photos library
Choose Photos > Preferences, then click General.
Deselect the “Copy items to the Photos library” checkbox.Now, when you import photos or video, Photos leaves the files in their original location and accesses them as referenced files.
Copy referenced files into a Photos library
You can copy referenced files into your photo library so they’re easier to back up and are automatically included in your iCloud Photo Library.
Select the files that you want to move into the photo library.
Choose File > Consolidate.
Click Copy.

Row Formulas and templates

I have a report template where I have selected multiple items inone data row. I would then like to find the sum of the datarow. I created the data row and then added a formula to thenext row on the report. The formula for the row is entered inthe first column on the report. The formula is"Sum(Row[1])". when the template is added to thereport with multiple columns the formula only appears in the firstcolumn. If I immediately try to save the rows on the currentdesign to a new template it presents an error saying that thesystem can't save the rows as a template be cause there is a"Cell Reference" but when I first saved the rows to atemplate there was no issue displayed regarding the "CellReferences". What am I doing wrong? Can I use thismethod of summarizing a group of items using a row formula? Any help would be greatly appreciated. Thanks,Duane

Hi
I am trying to achieve a similar scenario
For example - I have an order with 2 line items.
Line 1 xxxx qty 2
Line 2 xx3 qyt 3.
When it prints the lables I want it based on the qty - so for line 1 I want 2 labels and line 2 3 labels.
Does anyone know how to acheive this so it repeats the label based on the qty
Kind regards

How to Empty all rows within a Power Pivot Model

Hi,
I would like to know how to empty all rows within a Power Pivot model. I am in the process of creating quite a complex Power Pivot model. This means I need to create some sort of primitive version control process, e.g. stored multiple backups of the Power
Pivot model without the data.
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Forget what I've said before:
Have a look at Gil's thread here:
https://social.technet.microsoft.com/Forums/en-US/40abe021-1abd-4a2a-bf33-a035847fb7be/disconnect-datamodel-from-source?forum=powerquery
For Power Pivot it means that you can get rid of all your data, but Keep Relations, measures, ..everything.
Just import your tables once in order to get the connections right and move on.
Imke

Print Empty rows in a Template

Hi All,
my requirement is to create a template for payslip, which contains earnings, deductions & Net Amount.
If an employee has 10 earnings and 6 deductions and another employee has 3 earnings and 2 deductions then the Template is differ's based on the data.
For both the employees, the template should look same, so by inserting empty rows, i think it is solved...
How to insert Empty Rows in the Template?
Did anyone get this working and knows what I am doing wrong?
Regards,
Dilip

I think the query is not returning all the data desired.
You need a zero value for each deduction/earning per employee in the query results.
To get the query to give all the necessary zeros I would do a union that is simply all the employees returned in the first part of the query matched up with the table(s) that have all the deduction and earnings fields.
Of course the amount of the earnings or deductions would simply be an expression - zero.
Then when the data is run against the xmlp template, it would have to sum the values.
This would make all the reports come out the same.
The way to think about the the xmlp template is that it does a loop/filter through your data.
If your loop is on employee - it is only going to return the rows with that employee.
If that employee does not have a certain deduction then it will not show up.
If your loop is on deduction or earnings - it is only going to return the rows with that employee.
Now if you have a fixed list of deductions/earnings then you can code this into the xmlp template - tedious, but it will work.
If your deductions/earnings ever change, you will have to perform maintenance on the report.

Referencing rows within a table

Hi all,
I don't know if this has been brought up before, and believe me I have looked, but here goes... I have a table with many tens of rows. Cell 1 of those rows is a checkbox with the exit event scripted as (formcalc)
if
(this.rawValue == "1") then
form1.Main_Subform.GeneralTable.Row1.presence
= "visible"
else form1.Main_Subform.GeneralTable.Row1.presence = "hidden"
endif
What I want to do is not have to put the above script in each event of each checkbox. So is there a way of referencing all the checkboxes at once and having the same result of making the associated row go hidden if not checked?
Also, I have a reset button for the form that I want to be able to reset all row presences to visible when clicked. I should mention here that the form has several tables all with checkboxes in cell one and all with add buttons that addInstances at the bottom of the tables that I do not want reset with the reset button. In short, the tables list controlled documents that need to be reviewed annually and that because of the sheer volume of them will need to be parsed out, and the parsing may or may not be entire tables and the tables need to be able to be added to. Here is what I have regarding the reset of the presences of the rows (I have only just begun):
xfa.host.resetData();
form1.Main_Subform.GeneralTable.Row1.presence
= "visible";form1.Main_Subform.GeneralTable.Row2.presence
= "visible";form1.Main_Subform.GeneralTable.Row3.presence
= "visible";form1.Main_Subform.GeneralTable.Row4.presence
= "visible";
So my question regarding the reset button is... Is there a way of resetting the presences of all rows within either all tables or each table without listing each and every row individually within the click event of the reset button?
Thank you all in advance. -rpeterson

Hi,
You can add one more button to your form. On click event of this button you can put script, which will loop througth all rows of your table and check checkbox, if it will be checked then hide is bot - leas as it is.
If you want to hide row after click on checkbox, you have to put scripts to each of it.
BR,
Paul Butenko

Highlighting different rows within a JTable

I have a JTable that has 20 rows. I also have a Jlist next to the JTable. When someone selects something within the Jlist I want to highlight certain rows depending on what was selected within that list. For instance if a user selects Item1 within the list I want to highlight the 3rd, 8th and 11th row within a JTable. The problem is the JTable API will let you highlight a number of rows but not allow you to specify single rows to highlight at one time. When I run my code to do this I get the last row highlighted. The reason is because the 3rd and 8th row do get highlighted but when I call the setRowSelectionInterval(i, i); where i is the row to highlight it has already passed and will end up highlighting the 11th row only. Is there any work around for this?

First, make sure you table supports multi-select. Turn it on in this case, otherwise you can't select multiple items.
To color different rows, you'll have to set a cell renderer and use it to color those rows. It's possible to collor each and every cell a different color, set fonts, images, etc..you just need a good cell renderer.

Knowing where an instance is within a template

Does anyone know how I can find out where a particular instance of a workflow within
a template is? I'm trying to setup a template where if a number of instances are
of the same nature actioning a task within one of them causes all of the instances
to move along to the next task. Any ideas?
Regards
Preyesh

anyone could help me?

Shading rows within a template

Similar Messages

Maybe you are looking for