Shadow box not displaying in Captivate 5.0

I have a client who is working with Captivate 5.0 and when she imports an image into her project the shadow box feature under the properties tab does not show up. Am I missing a setting to where the shadow feature can be turned on? I use Captivate 5.5 and that feature is live when I place/import an image.

Shadow accordion is a new feature in CP5.5. If you want to have a shadow in CP5.0 you have to apply an Effect (category filters) where you'll find almost the same tweaking options, but the Effect will not be visible in editing mode as is the case for the new shadow in 5.5
Lilybiri

Similar Messages

  • Hightlight boxes not appearing in Captivate 7

    Hi,
    I have a slide with 3 highlight boxes inserted in Captivate 7.
    When all the boxes start at the same time (on the timeline) they all appear in the generated video no problem.
    But when I move 2 of the boxes down the timeline to start later, they then do not appear in the generated video.
    I am using Windows 7.
    Can anyone help!!??!
    Thanks
    K

    Hi, cannot get on the forums (again), will try by mail.
    Here is some 'literature' for you:
    http://blog.lilybiri.com/question-question-slides-in-captivate
    http://blog.lilybiri.com/question-question-slides-part-2
    Do not delete or try to delete embedded objects on quiz/score slide or
    you'll probably get in trouble. Embedded are those objects that have no
    separate timeline on the slide. The Review Area is only used to mention
    when a question has not be answered (totally) and on the score slide. As
    for the Progress indicator: have a look at the Quiz Preferences. Under
    Settings you can uncheck 'Show progress', and the text can be changed under
    Default Labels.
    I presented a BYOL session about Quizzes recently. And my training always
    starts with the Quiz styles in the Object Style Manager, then go to the
    Master slides and tweak what is necessary. Check the Quiz Preferences, I
    just pointed to; only after those three actions insert question slides.
    Lilybiri
    2014-11-19 14:26 GMT+01:00 chickenopolisgirl <[email protected]>:
        hightlight boxes not appearing in Captivate 7  created by
    chickenopolisgirl <https://forums.adobe.com/people/chickenopolisgirl> in *Adobe
    Captivate* - View the full discussion
    <https://forums.adobe.com/message/6943714#6943714>

  • BPS_WB: Please Wait Dialog Box not Displaying correctly???

    When we switched our Planning Interfaces to using the New Planning Interface Design the Please Wiat Dialog Box does not display correctly. 
    When a Request is fired and the client is waiting for the Response all that shows is a white block in the middle of the screen with no dialog screen or other information. 
    It maybe associated with the following:
    function bpsOpenURLSelf(doIt, url)
          if (doIt) {
            try {
                document.body.style.cursor = "wait"; // works only in IE
            } catch (ex) {} // ignore
            open(url,'_self');
          // note: function with doIt==false is used to check
          //       existence of the opener window
    Or it may be associated with a CSS issue?
    I am currently using IE 6.0.2900.2180.
    Any thoughts would be appreciated!
    Thanks, ATC

    Hi Alan,
    please implement SAP note 845305.
    Regards
    Marc
    SAP NetWeaver RIG

  • Reg: Drop-Down list Box not  displaying values

    Hi Experts,
                     i am publishing a module pool program in the internet using SICF Transaction . In the internet my drop down list box is not displaying the default value  but in my sap it works fine .
    What may be the problem?
    Regards,
    Vikram

    Hello Thorsten Domsalla ,
                      My Problem is in my sap module pool program there is a drop down list box which disaplays  default values its working fine in sap gui but when i access through internet (SICF) Transaction the Drop down list box not listing out default values .
    i am using Integrated ITS Version 7.0 and Support package 08.
    Regards,
    Vikram

  • Modeless Dialog Box Not Displaying Contents

    I have created a simple modeless dialog box. Although the dialog box and title appear, the contents (a label) do not appear. The dialog box does display correctly if the dialog box is switched to a modal box.
    I got into this problem because I also cannot get labels to change after their initial display on the main frame. I've tried repaint() and Thread.sleep().
    Please help me, I am a newbie to Java.
    Sincerely,
    John

    I actually had a similar problem with a JDialog containing only a progress bar, which ended up being a problem with Swing rather than my code (the bug report has already been filed). Adding a second component to the dialog fixed the problem, counterintuitive as that seems. Try it and see if that helps... If the label is a JLabel, you might try calling revalidate() on it to get the text to update.
    Ian

  • Multi-Select Box Not Displaying Values Passed From Grid?

    Coldfusion 8
    I inherited an application and am trying to maintain and improve it... hit a snag today.
    I have a multi-select box that is not displaying what I expect.  The values come from a ColdFusion grid which is based off a database query.
    Here is the code for the select - does not work - nothing is selected:
    <cfselect name="USER_IDS" multiple="true" queryposition="below" selected="USER_IDS" query="ActiveUsersPlus" disabled="#disabled#" value="G_USER_WORK_UNIT_SK" display="G_USER_ID" >
    </cfselect>
    Now if I change the multiselect to a single select like below - it takes the first item in the field list (from the grid) and selects it in the drop down.
    <cfselect name="USER_IDS" multiple="false" queryposition="below" selected="USER_IDS" query="ActiveUsersPlus" disabled="#disabled#" value="G_USER_WORK_UNIT_SK" display="G_USER_ID" >
    </cfselect>
    Or if I assign a variable like this and use the multi-select code it seems to work as well.
    testlist = "22,26";
    <cfselect name="USER_IDS" multiple="true" queryposition="below" selected="#testlist#" query="ActiveUsersPlus" disabled="#disabled#" value="G_USER_WORK_UNIT_SK" display="G_USER_ID" >
    </cfselect>
    I have displayed the value of "User_IDs" in the grid and in the data entry part of the screen to see values of:  22,26
    to make sure that wasn't my issue.
    Do grids and multiselects require something additional?  Any advice on how to resolve?

    Problem was related to some javascript for the select box.  There was a function for a single select box but not a multiple select box - this fixed it: 
    if(theForm.elements[i].type == "select-multiple"){
                        var selectBox = theForm.elements[i];
                        var sbname = selectBox.name;
                        cpvalue = String(eval('record.data.' + sbname));
                        var NotifyArray = cpvalue.split(',');
                        for (var j=0; j < selectBox.length; j++) {
                            selectBox[j].selected = false;
                        for (var j=0; j < selectBox.length; j++) {
                            sbvalue = selectBox[j].value;
                            for (var k=0; k < NotifyArray.length; k++){
                                if (sbvalue == NotifyArray[k]){
                                    selectBox[j].selected = true;

  • Search box not displaying correctly in Safari

    How can the search bar on the Apple site not display correctly in Safari? I find this odd that Apple would allow this. It displays like 2 search boxes overlapping each other. It still functions correctly but it is a little embarrassing since I am always bashing windows pro browser display.

    Hi
    Welcome to Apple Discussions
    Might be a corrupted cache or cookies issue. First, go to Safari Preferences>Security>Show Cookies. Type Apple in the Spotlight panel. Highlight/remove the cookies. Then, go to the Safari Menu>Empty Cache. Try the Apple site.
    If the double search panel still appears, go to the Finder: Your User Account>Library>Caches. There, move to the trash the com.apple.safari file. Restart Safari and try the Apple site again.
    Post back

  • Hebrew fonts from drop-down box not displaying in text box.

    I am using InDesign CS 5.5 on a Mac 10.8.4.
    When in ID, the fonts I am seeing on the Font dropdown menu when I try to use in a text box are not displaying correctly. They only display as boxes. The fonts are in the Hebrew language. They are properly installed in the FontBook.
    Please help!! Thank you.

    Reema,
    I followed most of your steps. I have a question reg. step 3 ie populating data in node 1.
    Here is my code:
    method WDDOINIT .
    types: begin of zs,
    zktokd type kna1-ktokd,
    end of zs.
    data: handle1 type ref to if_wd_context_node,
    begin of zstruct,
    zktokd type kna1-ktokd,
    end of zstruct,
    zitab type table of zs.
    handle1 = wd_context->get_child_node( name = 'NODE1' ).
    *select ktokd into corresponding fields of zstruct from kna1.
    *append zstruct to zitab.
    *endselect.
    zstruct-zktokd = 'Sold-to party'.
    append zstruct to zitab.
    zstruct-zktokd = 'Goods recipient'.
    append zstruct to zitab.
    zstruct-zktokd = 'Payer'.
    append zstruct to zitab.
    zstruct-zktokd = 'Bill-to party'.
    append zstruct to zitab.
    zstruct-zktokd = 'Prospective Customer'.
    append zstruct to zitab.
    zstruct-zktokd = 'Competitor'.
    append zstruct to zitab.
    zstruct-zktokd = 'Sales partners'.
    append zstruct to zitab.
    zstruct-zktokd = 'Hierarchy Node'.
    append zstruct to zitab.
    zstruct-zktokd = 'Named List of Accounts'.
    append zstruct to zitab.
    zstruct-zktokd = 'Distribution center'.
    append zstruct to zitab.
    zstruct-zktokd = 'Payer'.
    append zstruct to zitab.
    handle1->bind_table( new_items = zitab ).
    endmethod.
    Please let me know if this is the best way to populate the node and then bind the table values from the node to the drop down box.
    Thanks and Regards.

  • PO BOX not displayed in form

    hi all,
    i'm using sapscript to displayed this form... but when i debug the value for PO BOX is there but when print is not displayed... why this happened?
    below is my coding...
    TI           &GV_FULLNAME& <A>&GV_REGNO&</>
    /:           IF &GW_ADD_COM-STR_SUPPL1& NE &SPACE&.
    H5           &GW_ADD_COM-STR_SUPPL1&
    /:           ENDIF.
    /:           IF &GW_ADD_COM-STR_SUPPL2& NE &SPACE&.
    H5           &GW_ADD_COM-STR_SUPPL2&
    /:           ENDIF.
    /:           IF &GW_ADD_COM-STREET& NE &SPACE&.
    /:           IF &GW_ADD_COM-HOUSE_NUM1& NE &SPACE&.
    H5           &GW_ADD_COM-HOUSE_NUM1& &GW_ADD_COM-STREET&
    /:           ELSE.
    H5           &GW_ADD_COM-STREET&
    /:           ENDIF.
    /:           ENDIF.
    /:           IF &GW_ADD_COM-STR_SUPPL3& NE &SPACE&
    H5           &GW_ADD_COM-STR_SUPPL3&
    /:           ENDIF.
    /:           ADDRESS PARAGRAPH H5
    /:             LOCATION &GW_ADD_COM-LOCATION&
    /:                       POBOX    &GW_ADD_COM-PO_BOX& CODE &GW_ADD_COM-POST_CODE2& CITY &GW_ADD-COM-PO_BOX_LOC&
    /:             POSTCODE &GW_ADD_COM-POST_CODE1&
    /:             CITY     &GW_ADD_COM-CITY1&, &GW_ADD_COM-CITY2&
    /:             REGION   &GW_ADD_COM-REGION&
    /:             COUNTRY  &GW_ADD_COM-COUNTRY&
    /:             FROMCOUNTRY &T001-LAND1&
    /:           ENDADDRESS

    hi Anaur,
             please check the following,
    1.  PO code entry in not empty in database table.
    2.  the variable u r using in script is correct.
    3. you wrote the varable correct and ther line is of command line / feed line.

  • Click Box not working in Captivate 5

    Why do simple things sometimes seem hard??  I have a click box created and set to "jump to slide x" when clicked.  This is on a presentation imported from PP 2010 and using Captivate 5.  When clicked in preview mode, the slide simply goes to the next screen rather than jumping to the one I want.  I notice there is already a click box created automatically on every screen of the imported presentation.  When I remove it, the presentation automatically goes to the next screen rather than waiting for the user to click to advance.  I want it to advance by the user clicking the forward arrow in the player controls.  If I leave it on screen, it seems to override my added click box.  Here is what my click box settings are:
    Here is what the click box looks like on the screen.  You can see that I resized (moved out of the way) the large click box automatically created by Captivate:
    This is using XP for a course that will be published in SCORM.  As always, many thanks for helping!
    Lisa

    Ah ha!  Yes, I do have a quiz.  17 scored questions scattered throughout the course.  Do I need to move the "jump to" slide before the last question then (or somewhere else as long as it's before the last question)?
    Thanks!
    Lisa

  • Information in the Powered by RoboHelp box not displaying

    Hi,
    While generating FlashHelp, I edited the information displayed when the Powered by RoboHelp icon is clicked from the Help file to include a Help version. While testing, some users reported clicking the icon displayed the information correctly, while others are not. Without getting into too much detail, does anyone have any ideas about why this would happen? Or how to fix? I've attached a couple of screen shots that may help.
    Any help you could offer would be much appreciated.
    Thanks-
    LJuneau

    Hi there
    You may wish to investigate differences in the Adobe Flash player versions.
    For example, where the dialog appears correctly, right-click the dialog and see what is reported for the Flash Player version.
    I'm thinking you may see a difference. (at least that's the hope )
    Try this on more than a few PCs. My guess is that those that work fine will all be related to one player version while the ones that don't display properly are related to another.
    Any way you slice it, you are facing an issue with the configuration of the end user's workstation. Unfortunately, we all too often have no control over that.
    Cheers all... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Text Entry Box not displaying

    Hello,
    I apologize if this has been answered prior, but I've searched and couldn't find a solution (although I might just be terrible at searching).
    Whenever I do a software simulation recording in a particular Captivate project (I'm running 5.5), the recording doesn't seem to auto-insert the TEB's for the text fields I've used (at all).  Instead, when the slide that's suppoesed to require text-entry is shown, it just auto-fills all the text I entered during the simulation and skips to the end of the slide.  I can't for the life of me figure out why; there are no TEB's on the timeline either for that slide.
    I do have my Custom settings setup to "Automatically Add Text Entry Boxes for Text Fields"
    Any idea why this is happening?

    Hi there
    Unfortunately there are a few variables in this equation. Captivate may not understand that a text entry field is a text entry field. It sometimes misunderstands other controls it encounters. I believe that it largely depends on how the application developer elected to name the element. I believe that's how Captivate knows what an element is. By its name. So if an application developer created a Text Entry field but named it something obscure, Captivate fails to recognize it as such and insert the appropriate element.
    The good news here is that you are free to add any element you like after you have recorded. So even though Captivate failed to catch it, there's nothing preventing you from manually adding it. It's a hassle to have to do it, but at least you aren't prevented from doing it.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • The edit text options box not displaying

    The Font family, size, alignment box does not appear anymore. What happened?

    Hi champsters,
    Is this occurring with a specific pdf?
    What version of Acrobat are you using?
    Have you tried updating it to the latest patch and checked?
    Regards,
    Rave

  • Text box not displaying

    Marking up a PDF using the text box tool in Adobe 7.0.9, saving the PDF. Then a MAC user using Adobe 8.1.2 opens the PDF and cannot see the text box tool.
    If you open the same PDF on a PC running Adobe 8 you can.
    Why can't you see the text box tool on the MAC?

    >Why can't you see the text box tool on the MAC?
    Are you saying they don't have the tool at all or they don't see the text you added using that tool?
    More importantly, are they actually using Adobe Acrobat or are they using Adobe Reader?
    (You just mentioned "Adobe" which is the name of the company not any particular application)
    Are you sure they're using an Adobe product at all and not opening it in Mac Preview?

  • Save Password Dialogue Box Not Displaying

    I am seeing behavior that suggests that the dialogue box for saving passwords is invisible:
    * I can frequently see the outline of a box where the dialogue box would be
    * On a couple of occassions, the dialogue box would appear for a few seconds before disappearing - I was once even able to save it
    * On sites where I enter a password, hyperlinks are not recognized in the area where the save password dialogue would normally appear - it's as if the window is there but not visible.
    I have uninstalled and reinstalled.
    Private Browsing is Off. Save passwords is checked.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Will Apple TV make my wife forgive me...

    ...for converting her from a film photographer to a digital photographer? She tells me all the time that all the pictures that she has shot over the last five years are simply gone to her because she can't see them. She uses an old Dell laptop with a

  • J2EE app server not able to compile JSP

    Hi, I have just installed J2EE app server and am trying to deploy a JSP. The following error is generated. can anyone help me please. Thank you, Deepika. org.apache.jasper.JasperException: Unable to compile class for JSP No Java compiler was found to

  • Identify New or Change for BOMMAT IDOC in SAP

    Hi Experts, We need help in identifying if particular BOM is new (i.e. CREATE) or CHANGE using IDOC data. But we see IDOC_MSGFN values is not consistent, it is always "005", so we are not able to identify whether it is create or change. Is there any

  • "printf" asking for input data

    Hi, my cuestion is why when I ask the user to input data in the test bench with "printf" for my TOP.c not run? NOTE: I am a new user HLS :) Regards  

  • Can't update to FF 4 'cause my Mac OS 10.5.8 isn't Intel. What now?

    I'm beeing forced to download the Firefox 4 with the "far from being cute" notice that my current FF will be banned from the web soon. The thing is that my Mac OS 10.5.8 isn't an Intel, it's a PowerPC. What now? You guys should think (as Chrome shoul