Shadow is applied to entire image "box" not just on the element

Hi - not sure how to describe this. I am placing a photoshop image into Indesign. It is an image of a Poloroid picture. When I import it into ID the drop shadow is applied to the entire bounding box or image surface area. I'd like to have it applied just to the "element" or Poloroid image instead.
I'm saving it as a flattened JPG and placing it into ID.
I'm missing a step or somehting, because I've been successful in the past.
What am I doing wrong?
Many thanks in advance!!

If you are applying the drop shadow in Photoshop before flattening, it should appear in InDesign unchanged.
Make sure you view it at 100% to see the actual size of the effect.
If you are applying it in InDesign, place the image as a PSD, so that the layer with the Polaroid element is preserved.
I don't have ID on this computer so I can't be more specific.

Similar Messages

The signal in my area 20723, Laurel MD is lucky to get 1X and not just in the home. Network team consider the area.

Laurel, MD 20723 has a very weak signal if any at all. I would really like to see VZW Network team to consider the area. It's the entire area and not just in the home. Laurel is where one of Verizon's main facilities is located and should be a great surrounding area to set a good example. The coverage map is not accurate. It shows service, but it really isn't covered. I know, because I live there. Verizon, please consider expanding your great service in this area. Thank you.

This didn't start happening, it has always been the case in this area. My neighbors and friends, that are also VZW customers, who have lived here longer have confirmed this as well. A Verizon Fios technicnan come to do repairs and could not get his 4G LTE tablet to access data to run diagnostics from my property. He had to drive down the street to get some minimal connectivity and sit there for 30 minutes to access the diagnostics screens. Inside my house, my voice signal ranges from roaming - 2 bars and no data (1x if I'm lucky). I am plagued with drooped calls, missed calls and missed SMS texts, which forced me to get home phone line. My wife has a work AT&T blackberry and it has good signal strength. Friends with Sprint and T-Mobile who come over experience same weak signals. Looks like AT&T is the clear winner in this area. Once my wife's contract is up, we will be switching. Hate to leave VZW but have no choice.

Convert a catalog form PSE 7 to PSE 13 : Conversion works, but images are not related to the catalog anymore so you have to connect each single picture !!! How can I get the right relation automatically ?

My images are not related to the converted catalog, only preview works, tags and other information is given, but the (network) path to the original images is missing and is substituted by a local path with c:\. How can I solve the problem automatically ?

I actually need to apply this to at least a couple different layouts. Two exampled below (The outlined boxes are text areas, the black boxes where the product images will go.)
I prefer InDesign5, but I have 6 too.

Rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present includeing Adobe Flash

rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present including Adobe Flash

If that only happens on a specific page or domain then make sure that you do not block images on that domain.
See [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the Media tab of that "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
*You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
*You can see all image exceptions in Tools > Options > Content: Load Images > Exceptions

My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails. I have to open each one to see what photo it is. This has just recently started to happen.

My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails. I have to open each one to see what photo it is. This has just recently started to happen.

I made sure the 'Show Icon Preview' box was checked. This is about all I can do, really, Frank, as i don't know enough about the workings of these machines to start fiddling about.
Strangely the images show as previews in some folders, yet not in others, even though they come from the same sources (my camera and my phone).

Images were not displaying in the B2B web shop for the products

Hi,
We have an issue with Product catalog images.we maintained images for the products and replicated(Initial) to TREX server,replication was successfull,but the images were not displaying in the b2b webshop for the products.
Anyone suggest what could be the problem?
Regards,
PV.

Hi,
The problem could because of following issues.
1) The replication is not done properly
2) The XCM doesn't have Image server's settings(URL)
3) The Image server is not reachable from ISA application.
4) The image server is not connected through HTTP.
Please check.
Regards,
Sateesh Chandra

Images are not visible in the iPhone.

When I open iTunes there are number of images found in the iPhone, but the images are not visible in the iPhone actually.

I using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
<?xml version="1.0" encoding="UTF-8"?>
<deployment>
<device>
<repository>
<mcd name="IrviaDemoApp" namespace="" version="1">
<action type="install"/>
<location type="local">
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
<component name="hpcds.es~irvia_demo_app">
<applications>
<application deploy="true" name="IrviaDemoApp"/>
</applications>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
</component>
</location>
</mcd>
</repository>
</device>
</deployment>
There is a <source> entry for the mimes directory, where "Component images" are located.
PD: Sorry about my poor english. I hope you to understand me.

My iMac suddenly can't read the backup hard drive I've been using for Time Machine. I did NOT just upgrade the OS or anything. The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago.`

My iMac suddenly can't read the backup hard drive I've been using for Time Machine. I tried unplugging the cord that connects the HD to the iMac and plugging it back in, but I still get "The disk you inserted was not readable by this computer" below which are buttons for Initialize, Ignore and Eject. I was using a cord that went from larger square plug to larger square plug. So then I tried one that went from smaller square plug to what I think is USB (thin rectangular plug) of the sort that connects the keyboard and mouse. It's the type that my printers and scanners use to connect to the iMac. I did NOT just upgrade the OS or anything. The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago. What else can I try before just trying to initialize and

Thanks, Michael! I do hear it at times spooling up and running. Just after I bumped the thread I looked for troubleshooting for this drive online and found the manual which suggested using Disk Utility which I've seen before accidentally (if I hit Command Shift U instead of Shift U to type "Unit" on a new folder for a student's homework ) but had never really noticed. Disk Utility does see it and also a sub-something (directory?) which might be the Time Machine archives on the disk, called disk1s2), sort of the way that my iMac's hard drive shows up as 640.14 GB Nitachi HDT7... and has a sub-something titled DB iMac, which is what I named my iMac's hard drive.
Anyway the owner's manual just shows the image under the formatting section, not the troubleshooting section, but as soon as I saw it in the manual I remembered seeing it accidentally a few times, went to it, and am now verifying the disk. Right now it's telling me that it will take 2 hours to complete the verification, so I guess I have a bigt of a wait. :-)
Does that fact that Disk Utilities can see it mean it's not failed, or just that it hasn't completely failed?
I can see the virtue in having multiple redundant backups, or at least two backups. What do you suggest? Two external hard drives? I had this one linked by ethernet, and but I also have a cord that could link it by USB (like a printer), so if this one is reparable I could get a second one and link it by USB. If this one is not reparable I could get two and do the same thing. I do have an Airport so I suppose it's possible to get some sort of Wi-Fi hard drive (my new printer/scanner uses only the network and not a cable, although it has a cable that I used for the initial installation), but I'd suspect a Wi-Fi hard drive might have a higher price.
What hard drives, if any, do you recommend? I seem to recall that when I was looking at external hard drives 4 years ago, Apple's were substantially more expensive, which is why I got the OWC Mercury Elite All Pro.

Error while creating Absence as "APP-PAY-51271: The assignment is not eligible for the element

Hi,
"APP-PAY-51271: The assignment is not eligible for the element."

Hi Nandhu,
Can you check below two things which can be cause of this error:
1. The link definition of the non-recurring element which is tagged with this absence type, as a best practice this should be an open link. If the link definition and the assignment eligibility is not matching then you may receive this error.
2. If you have defined an accrual plan for this absence type,then check if the accrual plan recurring element is been tagged to the assignment for which you are receiving this error.
Thanks,
Sanjay

My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?

My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?

1. If you are really on iOS 7.1, you may wish to try upgrading to 8.1.2 which is the latest (basing this on your signature).
2. If updating the phone doesn't help, is this only when you connect to a specific wifi network? Or all wifi networks (including public with no password)? If it is ALL wifi networks, you may have a hardware problem. Genius bar would be the next step.
Make a Genius Bar Reservation (or cancel an existing reservation)
http://www.apple.com/retail/geniusbar/
Sign in using your Apple ID

In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

In Preview, I suddenly am unable to get the "Adjust Color" tool panel to edit images. I just get the rectangular image selection tool instead. How do I ge the "Adjust Color" tool panel back?

Hmmm, I wonder if that window is hidden or off screen? Have you moved the pic window around to look under it?
Might try this...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
/Users/YourUserName/Library/Preferences/com.apple.Preview.plist
/Users/YourUserName/Library/Preferences/com.apple.Preview.bookmarks.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

In Indesign cc the preview of the selected image is not showing in the place dialog box how to enable that?

I can't able to see the preview of the selected image in place dialog box of indesign cc but it working in indesign cs6

Post Author: Argan
CA Forum: .NET
A couple things can cause this.
Right click on the red x to find out the name of the png file. Search the web server for that png and make sure that the asp worker has access to it.
The other is a image handler issue. Search the kbase for Red X NET 2005 and you will find a kbase or two that addresses this.

Updated image is not continuing with the State Restore Phase

MDT 2010 Update 1
Our MDT guru quit about a month ago.   I've done basic stuff here and there
But have never updated an image..
1. I deployed our current image to a Vmware workstation. Added about 200 updates. Nothing else done.
     I than rebooted and logged in as local admin and ran litetouch.wsf in a command prompt.
     And ran the "Sysprep and Capture image" task sequence.
     This sysprep'd and imaged with no errors to the captures folder.
2. I than moved that updated image to the "Operating Systems" folder on the deployment share. Renamed the old .wim file and renamed the new one to be the same as the old one..    (Not completely sure this is the correct
way to do this) But couldn't find any info on how this is done)
I than proceeded to reimage a machine with the updated .wim.
It gets all the way to the State Restore phase and just stops.   After the final reboot. I logon with the local admin account as usual and it does not continue.   the Minint and _SMSTaskSequence folder are still there.. If
I let it set for hours nothing happens...
I compared the BDD.log file for both images.    They seem to be identical up until the State Restore phase is supposed to start.
I see NO errors in the BDD log file...
So I am lost as in what to do to try and remedy this issue..
Info From Sharepoint

Its the new WIM that is not continuing...
I did try the import.   and it did the same thing.
here is the ending of the BDD.log file
ZTIConfigure COMPLETED. Return Value = 0   ZTIConfigure   4/22/2014 12:00:53 PM   0 (0x0000)
ZTIConfigure processing completed successfully.   ZTIConfigure   4/22/2014 12:00:53 PM   0 (0x0000)
Microsoft Deployment Toolkit version: 5.1.1642.01   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Write all logging text to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Validating connection to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Already connected to server bimaemg1mdtx64 as that is where this script is running from.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
No driver copying needs to be performed during the Lite Touch postinstall phase.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Updating downlevel OS configuration.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Vista identified, skipping update of Device Path   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
ZTIdrivers processing completed successfully.   ZTIdrivers   4/22/2014 12:00:53 PM   0 (0x0000)
Microsoft Deployment Toolkit version: 5.1.1642.01   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Write all logging text to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Validating connection to \\bimaemg1mdtx64\deploymentshare$\MININT-C1QJ4FN   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Already connected to server bimaemg1mdtx64 as that is where this script is running from.   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Property PHASE is now = STATERESTORE   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
ZTINextPhase COMPLETED. Return Value = 0   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
ZTINextPhase processing completed successfully.   ZTINextPhase   4/22/2014 12:00:53 PM   0 (0x0000)
Property DestinationLogicalDrive is now =    LiteTouch   4/22/2014 12:00:53 PM   0 (0x0000)
LTI initiating task sequence-requested reboot.   LiteTouch   4/22/2014 12:00:53 PM   0 (0x0000)
Info From Sharepoint

Image logo not displayed in the signature in mail

hi,
I have a problem which is very very urgent to solve. I setup an account in the application namely mail in the mac system (imac) I am having. The signature I setup contains the text as well as a logo (image). When I send mails from that mac to other mac systems the image appears well but when I send the mail to any PC the image is not there. I tried that image in tiff, gif and jpeg format but still it doesn't appear in the PCs.
Can please somebody help me out of this weird situation.
Regards,
Vandee
IMAC Mac OS X (10.0.x)

Vandee,
any complex HTML coding will not be supported by Mail. This is to prevent problems on the receiver side as much as possible, and to keep mails "light and clean".
But if you insist, have a look at this post, with an extensive description how to work around this.
http://discussions.apple.com/thread.jspa?messageID=713195&#713195

Images do not open in Photoshop Elements 10

I am using iPhoto 11 on my MacBook Pro. I have set the Preference for editing to use PSE 10. When I was using PSE 9, images selected in iPhoto for editing opened in PSE 9.
Since I have upgraded to PSE 10, when I select an image for editing, PSE 10 will open, but the image does not appear. I have also tried right clicking and designating edit in external editor. The images still do not show up in PSE 10. Why would 9 have worked but 10 not work? I have uninstalled and reinstalled PSE 10.
Ther version of PSE 10 I am using is from Costco and didn't give an upgrade option. Installed like a new app. I have also uninstalled PSE 9.
Any suggestions?

This is probably your problem:
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-exte rnal-editor/

Shadow is applied to entire image "box" not just on the element

Similar Messages

Maybe you are looking for