Shadow System
Hi all,
I don't understand the process myself but heres how i've been told it goes. When an upgrade is taking place a copy of the live environment is sent to a Shadow System to minimise downtime in the live environment. When the upgrade is completed it is transferred to the live environment.
Thats how it was described to me but the question i'm looking for an answer too is whether or not the copy on the Shadow System is then automatically deleted or whether theres a security risk in that someone could gain access to the Shadow System?
Any help appreciated. Thanks
Hi John,
As you correctly say, a shadow instance is installed to help with the upgrade process. You may rest assured though that the instance is automatically removed by the upgrade mechanism. More important, will be to note the OS file which holds all the passwords during the upgrade; ensure that this is removed once the upgrade is complete. The upgrade process informs you of both the filename and the location of it.
All the best with the upgrade!
Regards,
Graham
Similar Messages
-
SQL error 942 when logging into shadow system ECC 6.0 upgrade
Hello,
I am upgrading an ECC 5.0 system to ECC 6.0, and am trying to log into the shadow system to correct a few activation errors. With just about every transaction I attempt, I get the following error:
SQL error 942 occurred while accessing program SAPM
Here is an excerpt from the relevant trace file under /usr/sap/put/<SID>/<Instance>/work:
A GENER request remote generation: SAPMS380.
A GENER starting inline generation: SAPMS380 (reason: no process available fo
r remote generation).
A GENER got lock for program SAPMS380.
C *** ERROR => OCI-call 'OCILobWrite' failed with rc=942
[dboci.c 2561]
C *** ERROR => ORA-942 occurred when writing to a LOB
[dbsloci.c 10366]
C sc_p=112780f80,no=112,idc_p=1127973a0,con=0,act=1,slen=123,smax=1024,#vars=5,
stmt=11315e9c0,table=REPOLOAD
C prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=1,upsh_p=0,ocistmth_p=11315f5b8
C IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=45,vmax=3
2,bound=1,iobuf_p=112b1c8a0,vda_p=113161020
C lobs=1,lmax=4,lpcnt=0,larr=112b1b4c0,lcurr_p=0,rret=0
C OUT: cols=1,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=1,upto=0,rsize=4,vmax=64,bound=0,
iobuf_p=0,vda_p=1131617a0
C lobs=1,lmax=4,lpcnt=1,larr=112b1b5c0,lcurr_p=112b1b5c0,rret=1
C UPDATE "REPOLOAD" SET "QDATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A
2 AND "MACH" = :A3 RET\
C URNING "QDATA" INTO :A4;
B ***LOG BY4=> sql error 942 performing PUT on table REPOLOAD [dbrepolo#?
@ 964] [dbrepolo0964 ]
B ***LOG BY0=> ORA-00942: table or view does not exist [dbrepolo#? @ 964] [dbre
polo0964 ]
Table REPOLOAD does exist. I am investigating whether it has something to do with the SAPUSER table, but I would appreciate any other ideas anyone may have. I did not encounter this error until the phase ACT_700.
Regards,
L. LessmillerHello Sunny,
Thanks for your reply. I have looked at Notes 662644 and 400241 thoroughly and cannot find anything wrong with privileges for SAPR3 or SAPR3SHD, nor can I find anything wrong with the OPS$ mechanism.
Regards,
L. Lessmiller -
Shadow system not started due to memory
Dear All,
We are doing EHP7 upgrade and using SUM 1.0 sp 10 lmt 8
We faced an issue in preprocessing phase while SUM tries to start shadow system.
Shadow system failed to start> after checking logs at /SUM/abap/system/SID/DVEBMGS/work
it was found that shadow system was trying to allocate 210 gb of space to em_initial_size_MB. System gets crashed with core dump.
it was then fixed after i maintained the parameter em_initial_size_mb in shadow's system instance profile to 16384 and tried to start. it started up.
We never faced this issue with our other system while doing ehp6 as well. is it a bug with SUM 1.0 sp10 lmt8 which doesn't put the parameter in shadow profile.
error in dev_w0
*** ERROR => shmget(18806,34623979520,2016) (22: Invalid argument) [shmux.c
1524]
regards,
Devender Goyal.Hi,
Seems like a bug with the SUM 1.0 SP09. Refer thread SUM 1.0 SP09: Shadow instance assigns too much memory
Manually changing the parameter might be the solution available.
Regards,
Srikishan -
Hello
I have installed a new PI 7.4 system (SR 1) and now I'm updating it from SP 5 to the newest, SP 7 (both java and ABAP stacks)
I'm using SUM 1 SP 10 patch 8, which is the newest SUM version.
Is there any way to prevent SUM from creating a shadow system? this is just 2 support packages X 6 ABAP components. The system is brand new and I don't care about the downtime, only about the entire update duration.
SUM asked me if I want "Standard" or "Advanced" downtime configuration and I chose standard.
Thank's for your help
GalHi Gal,
single system mode is not available for PI dual stack systems, sorry - see Central SAP Note 1878193 for SUM ('No "Single System" mode on dual stack systems'), and threads like this one: SUM usage - Dual Stack
Regards, Boris -
SOLUTION MANAGER UPGRADE - Error when shadow system Starting
Hi All, We are upgrading our Solman system from 7.0 EHP 1 to SOLMAN 7.1. But the system is uable to start the Shadow
system. *** ERROR => DpHdlDeadWp: W0 (pid 12046) died (severity=0, status=65280) [dpxxwp.c 1522] DpTraceWpStatus: child (pid=12046) exited with exit code 255 *** ERROR => DpHdlDeadWp: W4 (pid 12050) died (severity=0, status=65280) [dpxxwp.c 1522] DpTraceWpStatus: child (pid=12050) exited with exit code 255 DpMBufHwIdSet: set Hardware-ID ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296] MBUF state ACTIVE DpWpBlksLow: max wp blocks in queue is 800 (80 %) MBUF component UP DpMsgProcess: 1 server in MBUF DpAppcBlksLow: max appc blocks in queue is 500 (50 %) *** ERROR => DpHdlDeadWp: W3 (pid 12049) died (severity=0, status=65280) [dpxxwp.c 1522] DpTraceWpStatus: child (pid=12049) exited with exit code 255 Sun Jan 8 21:50:33 2012 *** ERROR => DpHdlDeadWp: W2 (pid 12048) died (severity=0, status=65280) [dpxxwp.c 1522] DpTraceWpStatus: child (pid=12048) exited with exit code 255 *** ERROR => DpHdlDeadWp: W5 (pid 12051) died (severity=0, status=65280) [dpxxwp.c 1522] DpTraceWpStatus: child (pid=12051) exited with exit code 255 *** ERROR => DpHdlDeadWp: W6 (pid 12052) died (severity=0, status=65280) [dpxxwp.c 1522] DpTraceWpStatus: child (pid=12052) exited with exit code 255 *** ERROR => DpHdlDeadWp: W7 (pid 12053) died (severity=0, status=65280) [dpxxwp.c 1522] DpTraceWpStatus: child (pid=12053) exited with exit code 255 *** ERROR => DpHdlDeadWp: W8 (pid 12054) died (severity=0, status=65280) [dpxxwp.c 1522] DpTraceWpStatus: child (pid=12054) exited with exit code 255 *** ERROR => DpHdlDeadWp: W9 (pid 12055) died (severity=0, status=65280) [dpxxwp.c 1522] DpTraceWpStatus: child (pid=12055) exited with exit code 255 *** ERROR => DpHdlDeadWp: W10 (pid 12056) died (severity=0, status=65280) [dpxxwp.c 1522] DpTraceWpStatus: child (pid=12056) exited with exit code 255 *** ERROR => DpHdlDeadWp: W11 (pid 12057) died (severity=0, status=65280) [dpxxwp.c 1522] DpTraceWpStatus: child (pid=12057) exited with exit code 255 kill(12045,0) -> ESRCH: process died DpStartStopMsg: send stop message (myname is >solmanqazone_KSQ_04 <) DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=solmanqazone_KSQ_04 , sapsysnr= 4, hostname=solmanqazone AdGetSelfIdentRecord: > < AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 60 AdCallRegisteredCvtToExt: opcode 60 call 102164870 AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 4 AdCallRegisteredCvtToExt: opcode 4 call 102160ff8 AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K DpConvertRequest: net size = 189 bytes NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes NiBufSend starting NiIWrite: hdl 17 sent data (wrt=562,pac=1,MESG_IO) MsINiWrite: sent 562 bytes MsISnd2: send msg (ms hdr/msg 110/452 bytes) to name -, type 4, key - DpStartStopMsg: stop msg sent NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes NiIRead: hdl 17 received data (rcd=274,pac=1,MESG_IO) NiBufIIn: NIBUF len=274 NiBufIIn: packet complete for hdl 17 NiBufSend starting NiIWrite: hdl 17 sent data (wrt=114,pac=1,MESG_IO) MsINiWrite: sent 114 bytes MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key - MsSndName: MS_NOOP ok Send 4 bytes to MSG_SERVER NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes NiIRead: hdl 17 received data (rcd=114,pac=1,MESG_IO) NiBufIIn: NIBUF len=114 NiBufIIn: packet complete for hdl 17 NiBufReceive starting MsINiRead: received 114 bytes MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key - Received 4 bytes from MSG_SERVER Received opcode MS_NOOP from msg_server, reply MSOP_OK MsOpReceive: ok MsISendKeepalive : keepalive sent to message server NiIRead: hdl 17 recv would block (errno=EAGAIN) Sun Jan 8 21:52:21 2012 NiIPeek: peek for hdl 17 timed out (r; 1000ms) NiIRead: read for hdl 17 timed out (1000ms) DpHalt: no more messages from the message server DpHalt: sync with message server o.k. DpHalt: detach from message server ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12730] *** ERROR => e=28 semget(20465,1,2016) (28: No space left on device) [semux.c 498] *** ERROR => SemRq: Implicit SemInit failed. Key=65 [semux.c 1129] *** ERROR => Es2Cleanup: SemRq SEM_ES2_ADM (rc=1) [es2xx.c 1082] SemRq( 38, 1, -1) enter SemRq( 38, 1, -1) exit rtc=0, 0us SemRel( 38, 1 ) enter SemRel( 38, 1 ) exit rtc=0, 0us ShmDelete2( 73 ) DpHalt: cleanup event management DpHalt: cleanup shared memory/semaphores SemKeyPermission( 1 ) = 0740 (octal) SemKeyPermission( 1 ) = 0740 (octal) SemKeyPermission( 6 ) = 0740 (octal) SemKeyPermission( 6 ) = 0740 (octal) SemKeyPermission( 7 ) = 0740 (octal) SemKeyPermission( 8 ) = 0740 (octal) SemKeyPermission( 10 ) = 0740 (octal) SemKeyPermission( 11 ) = 0740 (octal) SemKeyPermission( 12 ) = 0740 (octal) SemKeyPermission( 13 ) = 0740 (octal) SemKeyPermission( 14 ) = 0740 (octal) SemKeyPermission( 15 ) = 0740 (octal) SemKeyPermission( 16 ) = 0740 (octal) SemKeyPermission( 17 ) = 0740 (octal) SemKeyPermission( 18 ) = 0740 (octal) SemKeyPermission( 19 ) = 0740 (octal) SemKeyPermission( 20 ) = 0740 (octal) SemKeyPermission( 21 ) = 0740 (octal) SemKeyPermission( 22 ) = 0740 (octal) *** ERROR => e=28 semget(20422,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 24 ) = 0740 (octal) *** ERROR => e=28 semget(20424,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 25 ) = 0740 (octal) *** ERROR => e=28 semget(20425,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 26 ) = 0740 (octal) *** ERROR => e=28 semget(20426,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 27 ) = 0740 (octal) *** ERROR => e=28 semget(20427,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 28 ) = 0740 (octal) *** ERROR => e=28 semget(20428,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 29 ) = 0740 (octal) *** ERROR => e=28 semget(20429,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 30 ) = 0740 (octal) *** ERROR => e=28 semget(20430,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 31 ) = 0740 (octal) *** ERROR => e=28 semget(20431,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 35 ) = 0740 (octal) *** ERROR => e=28 semget(20435,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 42 ) = 0740 (octal) *** ERROR => e=28 semget(20442,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 43 ) = 0740 (octal) *** ERROR => e=28 semget(20443,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 44 ) = 0740 (octal) *** ERROR => e=28 semget(20444,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 45 ) = 0740 (octal) *** ERROR => e=28 semget(20445,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 47 ) = 0740 (octal) *** ERROR => e=28 semget(20447,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 48 ) = 0740 (octal) *** ERROR => e=28 semget(20448,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 49 ) = 0740 (octal) *** ERROR => e=28 semget(20449,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 50 ) = 0740 (octal) *** ERROR => e=28 semget(20450,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 51 ) = 0740 (octal) *** ERROR => e=28 semget(20451,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 53 ) = 0740 (octal) *** ERROR => e=28 semget(20453,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 54 ) = 0740 (octal) *** ERROR => e=28 semget(20454,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 55 ) = 0740 (octal) *** ERROR => e=28 semget(20455,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 56 ) = 0740 (octal) *** ERROR => e=28 semget(20456,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 57 ) = 0740 (octal) *** ERROR => e=28 semget(20457,1,2016) (28: No space left on device) [semux.c 498] SemKeyPermission( 58 ) = 0740 (octal) DpCleanupSharedResources: MpiCleanup ShmCleanup( 62 ) ShmCreate( 62, 0, 2, 0xffffffff7fffea78 ) ShmProtect( 62, 3 ) ShmKeySharedMMU( 62 ) = 0 (octal) ShmProtect: shmat key 62 prot 3/0 done ShmCreate( 62, 0, 2, -> 0xfffffffe1d400000 ) MpiCleanup() -> MPI_OK DpCleanupSharedResources: removing Semaphore-Management DpCleanupSharedResources: removing request queue ShmCleanup( 31 ) ShmCreate( 31, 0, 2, 0xffffffff7fffea78 ) ShmProtect( 31, 3 ) ShmKeySharedMMU( 31 ) = 0 (octal) ShmProtect: shmat key 31 prot 3/0 done ShmCreate( 31, 0, 2, -> 0xffffffff24000000 ) DpCleanupSharedResources: ShmCleanup SHM_SYS_ADM_KEY ShmCleanup( 1 ) ShmCreate( 1, 0, 2, 0xffffffff7fffeb28 ) ShmProtect( 1, 3 ) ShmKeySharedMMU( 1 ) = 0 (octal) ShmProtect: shmat key 1 prot 3/0 done ShmCreate( 1, 0, 2, -> 0xffffffff78100000 ) DpCleanupSharedResources: ShmCleanup SHM_DP_ADM_KEY ShmCleanup( 2 ) ShmCreate( 2, 0, 2, 0xffffffff7fffeb28 ) ShmProtect( 2, 3 ) ShmKeySharedMMU( 2 ) = 0 (octal) ShmProtect: shmat key 2 prot 3/0 done ShmCreate( 2, 0, 2, -> 0xffffffff28800000 ) DpCleanupSharedResources: ShmCleanup SHM_DP_CA_KEY ShmCleanup( 3 ) ShmCreate( 3, 0, 2, 0xffffffff7fffeb28 ) ShmProtect( 3, 3 ) ShmKeySharedMMU( 3 ) = 0 (octal) ShmProtect: shmat key 3 prot 3/0 done ShmCreate( 3, 0, 2, -> 0xffffffff24800000 ) DpCleanupSharedResources: ShmCleanup SHM_PF_KEY ShmCleanup( 4 ) ShmCreate( 4, 0, 2, 0xffffffff7fffeb28 ) ShmKeyPermission( 4 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_SAPSCSA_AREA_KEY ShmCleanup( 5 ) ShmCreate( 5, 0, 2, 0xffffffff7fffeb28 ) ShmKeyPermission( 5 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_PXA_KEY ShmCleanup( 6 ) ShmCreate( 6, 0, 2, 0xffffffff7fffeb28 ) ShmKeyPermission( 6 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_VB_ADM_KEY ShmCleanup( 7 ) ShmCreate( 7, 0, 2, 0xffffffff7fffeb28 ) ShmKeyPermission( 7 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_PAGING_AREA_KEY ShmCleanup( 8 ) ShmCreate( 8, 0, 2, 0xffffffff7fffeb28 ) ShmKeyPermission( 8 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_ROLL_AREA_KEY ShmCleanup( 9 ) ShmCreate( 9, 0, 2, 0xffffffff7fffeb28 ) ShmKeyPermission( 9 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_CALI_BUFFER ShmCleanup( 11 ) ShmCreate( 11, 0, 2, 0xffffffff7fffeb28 ) ShmGet( 10, 11, 0, 2, 0xffffffff7fffe9e0 ) DpCleanupSharedResources: ShmCleanup SHM_CCC_KEY ShmCleanup( 12 ) ShmCreate( 12, 0, 2, 0xffffffff7fffeb28 ) ShmGet( 10, 12, 0, 2, 0xffffffff7fffe9e0 ) DpCleanupSharedResources: ShmCleanup SHM_ALERT_AREA_KEY ShmCleanup( 13 ) ShmCreate( 13, 0, 2, 0xffffffff7fffeb28 ) ShmGet( 10, 13, 0, 2, 0xffffffff7fffe9e0 ) DpCleanupSharedResources: ShmCleanup SHM_PRES_BUF ShmCleanup( 14 ) ShmCreate( 14, 0, 2, 0xffffffff7fffeb28 ) ShmGet( 10, 14, 0, 2, 0xffffffff7fffe9e0 ) DpCleanupSharedResources: ShmCleanup DVS_SHM_KEY ShmCleanup( 15 ) ShmCreate( 15, 0, 2, 0xffffffff7fffeb28 ) ShmGet( 10, 15, 0, 2, 0xffffffff7fffe9e0 ) DpCleanupSharedResources: ShmCleanup SHM_SEM_MONI_BUFFER ShmCleanup( 16 ) ShmCreate( 16, 0, 2, 0xffffffff7fffeb28 ) ShmProtect( 16, 3 ) ShmCreate( 16, 0, 2, -> 0xffffffff29004000 ) ShmDelete2( 10 ) Sun Jan 8 21:52:22 2012 DpCleanupSharedResources: ShmCleanup SHM_ROLL_ADM_KEY ShmCleanup( 17 ) ShmCreate( 17, 0, 2, 0xffffffff7fffeb28 ) ShmGet( 10, 17, 0, 2, 0xffffffff7fffe9e0 ) ShmCreate( 10, 0, 2, 0xffffffff7fffe828 ) ShmKeyPermission( 10 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_PAGING_ADM_KEY ShmCleanup( 18 ) ShmCreate( 18, 0, 2, 0xffffffff7fffeb28 ) ShmKeyPermission( 18 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_DB_TBUFF ShmCleanup( 19 ) ShmProtect( 52, 3 ) ShmKeySharedMMU( 52 ) = 0 (octal) ShmProtect: shmat key 52 prot 3/0 done ShmCreate( 52, 0, 2, -> 0xffffffff77600000 ) DpCleanupSharedResources: ShmCleanup SHM_ES_ADM_T ShmCleanup( 53 ) ShmCreate( 53, 0, 2, 0xffffffff7fffeb28 ) ShmKeyPermission( 53 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_DB_OBJ_BUFFER ShmCleanup( 54 ) ShmCreate( 54, 0, 2, 0xffffffff7fffeb28 ) ShmKeyPermission( 54 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_RSPO_LOCAL_KEY ShmCleanup( 55 ) ShmCreate( 55, 0, 2, 0xffffffff7fffeb28 ) ShmKeyPermission( 55 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_PF_AS_KEY ShmCleanup( 56 ) ShmCreate( 56, 0, 2, 0xffffffff7fffeb28 ) ShmKeyPermission( 56 ) = 0740 (octal) DpCleanupSharedResources: ShmCleanup SHM_PROFILE ShmCleanup( 57 ) ShmCreate( 57, 0, 2, 0xffffffff7fffeb28 ) ShmProtect( 57, 3 ) ShmKeySharedMMU( 57 ) = 0 (octal) ShmProtect: shmat key 57 prot 3/0 done ShmCreate( 57, 0, 2, -> 0xffffffff75700000 ) DpCleanupSharedResources: ShmCleanup SHM_ENQID_KEY ShmCleanup( 58 )
Regards, VIjay K.GHi,
From logs:
28: No space left on device
Check the disk space. If linux, use df -h command. Windows its easier
Check if any drive / file system is 100% used up.
Regards,
Srikishan -
SHADOW system Dispatcher NOT RUNNING
Hi All,
We are upgrading from 4.7 to ECC6.0. The PREPARE went fine but during the upgrade, we are getting an error. The SAPup is not able to connect to the shadow system for running some jobs. When we checked the MMC, we found that the dispatcher is not running for our SHADOW system. We are on Windows/Oracle 10g.
Here is the dev_rfc.trc file -
ERROR file opened at 20070819 171047 Eastern Daylig, SAP-REL 640,0,144 RFC-VER 3 851602 MT-SL
T:3916 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
ERROR partner not reached (host nkharb, service 3300)
TIME Sun Aug 19 17:10:47 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8716
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
>TS> Sun Aug 19 17:10:48 2007
T:3916 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ECC, GWHOST=nkharb, GWSERV=3300
ERROR internal error
(this retcode should be handled by caller of NI-layer)
TIME Sun Aug 19 17:10:48 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -8
MODULE nixx.c
LINE 666
COUNTER 3
ERROR file opened at 20070819 171213 Eastern Daylig, SAP-REL 640,0,144 RFC-VER 3 851602 MT-SL
T:3916 Error in program 'IGS.ECC': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2414
ERROR file opened at 20070819 171455 Eastern Daylig, SAP-REL 640,0,144 RFC-VER 3 851602 MT-SL
T:2996 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
ERROR partner not reached (host nkharb, service 3300)
TIME Sun Aug 19 17:14:55 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8716
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
>TS> Sun Aug 19 17:14:56 2007
T:2996 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ECC, GWHOST=nkharb, GWSERV=3300
ERROR internal error
(this retcode should be handled by caller of NI-layer)
TIME Sun Aug 19 17:14:56 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -8
MODULE nixx.c
LINE 666
COUNTER 3
>TS> Sun Aug 19 17:17:01 2007
T:2996 Error in program 'IGS.ECC': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2414
T:2996 Error in program 'IGS.ECC': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2414
>TS> Sun Aug 19 17:21:21 2007
>TS> Sun Aug 19 19:09:14 2007
T:2860 Error in program 'listenerrfc': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ECC, GWHOST=nkharb, GWSERV=3300
ERROR partner 'nkharb:3300' not reached
TIME Sun Aug 19 19:09:14 2007
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -10
MODULE nixxi.cpp
LINE 2985
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
>TS> Sun Aug 19 19:11:19 2007
T:2860 Error in program 'listenerrfc': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2605
>TS> Sun Aug 19 19:12:24 2007
ERROR file opened at , SAP-REL 710,0,0 RFC-VER 3 880476 MT-SL
T:3088 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
ERROR partner 'nkharb:3300' not reached
>TS> Sun Aug 19 23:41:23 2007
T:3088 Error in program 'listenerrfc': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2605
>TS> Sun Aug 19 23:42:28 2007
ERROR file opened at 20070821 010533 Eastern Daylig, SAP-REL 700,0,108 RFC-VER 3 904546 MT-SL
T:960 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
>TS> Tue Aug 21 01:05:34 2007
T:960 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ECC, GWHOST=nkharb, GWSERV=3300
>TS> Tue Aug 21 01:07:44 2007
T:960 Error in program 'igsmux': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2609
>TS> Tue Aug 21 01:08:49 2007
>TS> Tue Aug 21 11:54:21 2007
T:960 Error in program 'igsmux': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2609
Log for Dev_w1 is -
A RFC 2736 CONVID 16423171
A * CMRC=20 DATA=0 STATUS=0 SAPRC=236 ThSAPECMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SAP_UPGRADE_SHADOW_SYSTEM (handle: 2, , {704B2D05-0936-4393-9297-15EB6564E298})
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Tue Aug 21 12:19:07 2007
M ***LOG R49=> ThCPICSyncWait, CPIC-Error (020236) [thxxcpic.c 3595]
M ***LOG R64=> ThCPICSyncWait, CPIC-Error ( CMINIT(SAP)) [thxxcpic.c 3608]
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host nkharb / sapgw00
M * ERROR partner not reached (host nkharb, service sapgw01)
M *
M * TIME Tue Aug 21 12:19:07 2007
M * RELEASE 640
M * COMPONENT NI (network interface)
M * VERSION 37
M * RC -10
M * MODULE nixxi.cpp
M * LINE 8715
M * DETAIL NiPConnect2
M * SYSTEM CALL SiPeekPendConn
M * ERRNO 10061
M * ERRNO TEXT WSAECONNREFUSED: Connection refused
M * COUNTER 675
M *
M *****************************************************************************
M
A RFC 2272 CONVID 16466453
A * CMRC=20 DATA=0 STATUS=0 SAPRC=236 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SAP_UPGRADE_SHADOW_SYSTEM (handle: 2, , {CE9AC984-34D3-4F59-B121-4212EF40B493})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Please suggestHere is the output of dev_rd -
ERROR => NiGetHdlParam: hdl 6 invalid [nixxi.cpp 5774]
Tue Aug 21 13:15:45 2007
LOCATION SAP-Gateway on host nkharb / sapgw00
ERROR partner not reached (host nkharb, service sapgw01)
TIME Tue Aug 21 13:15:45 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi.cpp
LINE 8715
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 731
GwTraceHdlInfo:
ni hdl = 9
type = CLIENT
net_stat = CONNECT_TO_REM_GW_PENDING
hostaddr = 192.168.1.107
opcode = NORMAL_CLIENT
index = 120
data = 07244F68
ext_info = 003CEE78
ERROR => NiGetHdlParam: hdl 6 invalid [nixxi.cpp 5774]
Tue Aug 21 13:15:45 2007
LOCATION SAP-Gateway on host nkharb / sapgw00
ERROR partner not reached (host nkharb, service sapgw01)
TIME Tue Aug 21 13:15:45 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi.cpp
LINE 8715
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 731
GwTraceHdlInfo:
ni hdl = 9
type = CLIENT
net_stat = CONNECT_TO_REM_GW_PENDING
hostaddr = 192.168.1.107
opcode = NORMAL_CLIENT
index = 120
data = 07244F68
ext_info = 003CEE78
ext_info = 003CEE78
offset = 0
rest_len = 64
snc_forced = 0
remote gateway infos:
hostname =
hostaddr = 192.168.1.107
service = sapgw01
tpname = sapdp01
GwTraceHdlInfo:
ni hdl = -1
type = NO_CONN_TYPE
net_stat = NET_NORMAL
hostaddr = 0.0.0.0
opcode = UNDEF_TYPE
index = -1
data = 00000000
ext_info = 00000000
offset = 0
rest_len = 0
snc_forced = 0
ERROR => NiGetHdlParam: hdl 9 invalid [nixxi.cpp 5774]
Please help me on this. -
Correction in Shadow system.
Respected guru's,
i have to perform corrections in Shadow system as mentioned in note 1256384.
Please help me to do so on my sollution manager machine.
Regards,
DayaHi,
Could you please give more details on your question what are you doing on solman ?`
on which systems- Shadow instance is there ?
What problem are you facing ?
Thanks
Sunny -
Error during creating the shadow system
Hello Support,
I am updating the ECC system to EHP4 .
We are having error in the RUN_RSVWSCPY phase (Shadow system Installation)
In one of the phases RUN_RSVWSCPY , it runs a job in the source system (i.e RPD)
Job Name :RSUG_COPY_SHD_VIEWS
This Job is cancelling with UNCAUGHT EXCEPTION
In the ST22 , it gives me ORA error
i.e ORA -01017 : invalid usename /password ;login denied.
When i checked the dev_w0 of the source system , i found the following error
B Connect to UPGSHD as SAPR3SHD with RPD
C Client NLS settings:
C Connecting as SAPR3SHD/<pwd>@RPD on connection 1 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x113c62ff0 0x113c7b528 0x113c7add8
C Starting user session (con_hdl=1,svchp=0x1150708e8,srvhp=0x113c7f3a8,usrhp=0x115070278)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
http://dboci.c 4532
C *** ERROR => CONNECT failed with sql error '1017'
http://dbsloci.c 11145
B ***LOG BY2=> sql error 1017 performing CON dbds#1 @ 1044 dbds 1044
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied dbds#1 @ 1044 dbds 1044
B ***LOG BY1=> sql error 1017 dbacds#2 @ 1433 dbacds 1433
A TH VERBOSE LEVEL FULL
Please helpHello,
This is normally caused by the fact that the shadow schema user SAPR3SHD still exists from a previous upgrade and has a password different from the default. The obvious action is to set the password (ALTER USER SAPR3SHD IDENTIFIED BY SAP).
Based on earlier experience I must warn you however that you might be in for some trouble, because this situation sometimes seems to lead to the shadow repository being incomplete. I ran into this a long time ago (with an upgrade to ECC 5) and was then able to work my way out. Recently however a consultant I know had the same thing with an EHP4 upgrade and had to restart from the beginning. I don't want to frighten you needlessly, but I guess it's better to be warned. If after restarting the upgrade you get errors like "Table SVERS does not exist", then you're in the s...
In your next upgrades it is mandatory that before startig the upgrade you either drop the old shadow schema completely or at least reset the password to "SAP".
Good luck,
Mark -
Hello,
I have the following problem-
history
migrated database from mssql 2000 to 2005 (ran the copy tools and all)
BW 3.1 running with 640 kernel
started upgrade
everything went fine up to start of shadow system:
dev trace:
C np:(local) connection used on BEBRUBW04
C CopyLocalParameters: dbuser is 'pbd_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C CheckCodepageType: line 24644. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
C sloledb.cpp [CheckCodepageType,line 24644]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
C Procname: [CheckCodepageType -- no proc]
C Cache sizes: header 88 bytes, 20000 names (28160000 bytes), 500 dynamic statements (2756000 bytes), total 30916088 bytes
C Using shared procedure name cache BEBRUBW04_PBDPBD_PBD_SHD_MEM initialized by another process.
C Connected to db server : [BEBRUBW04] server_used : [np:(local)], dbname: PBD, dbuser: pbd
C pn_id:BEBRUBW04_PBDPBD_PBD_SHD...
shadow system just could not make the connection to the db
anyone knows a reason why ? - I checked the sid_shd user, all seemed ok
thanks
PaulHi,
This problem is for BIN collation.
1. You have to convert from BIN (MS SQL Server 2000) to BIN2 (MS SQL Server 2005 ) collation.
2. Check first db properties in MS SQL Server for Collation.
Regards,
Srini Nookala -
Dear All,
We are upgrading our development server,in the phase shadow_import_inc our shadow system not started.
When we check the system the ora 942 error message comes.
How to start the shadow system.
regards
gunaHi,
Open
sql plus " / as sysdba "
select username from dba_users;
check the shadow instance and ops $.If it is not there pls create ..
Create the SAPUSER table as <sid>adm using the following command:
CREATE TABLE "OPS$<sid>ADM".SAPUSER
(USERID VARCHAR2(256), PASSWD VARCHAR2(256));
INSERT INTO "OPS$<sid>ADM".SAPUSER VALUES ('<sapowner>', '<password>');
Award points ..
Rgrds
CS -
Shadow system Dispatcher dies when Upgrading to EHP5 on MS SQL SERVER 2008
Hi I am upgrading ECC 6.0 to EHP5 on MS QL Server 2008.
The Dispatcher dies with the following error in Dev_w0 trace in Shadown work directory.
Any Help is highly appreciated.
calling db_connect ...
B Loading DB library 'D:\usr\sap\EHPI\abap\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\EHPI\abap\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\EHPI\abap\exe\dbmssslib.dll' is "720.00", patchlevel (0.95)
C Callback functions for dynamic profile parameter registered
C Thread ID:14964
C Thank You for using the SLODBC-interface
C Using dynamic link library 'D:\usr\sap\EHPI\abap\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C SAP patchlevel 0
C SAP patchno 95
C Last MSSQL DBSL patchlevel 0
C Last MSSQL DBSL patchno 95
C Last MSSQL DBSL patchcomment R3load import: Invalid field size for datatype (1603882)
C ODBC Driver chosen: SQL Server Native Client 10.0 native
C Network connection used from HCMWSECDEV to HCMWSECDEV\ECD using tcp:HCMWSECDEV\ECD
C Network connection used from HCMWSECDEV to HCMWSECDEV\ECD using tcp:HCMWSECDEV\ECD
C Driver: sqlncli10.dll Driver release: 10.00.2531
C GetDbRelease: 10.00.2531.00
C GetDbRelease: Got DB release numbers (10,0,2531,0)
C ERROR: -1 in function CheckCodepageType (SQLExecDirect failed) [line 19432]
C (208) [42S02] [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'DBPROPERTIES'.
B Connection 0 opened (DBSL handle 0)
C ERROR: -1 in function StartSelect (execute) [line 12976]
C (208) [42S02] [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'SVERS'.
C ERROR: -1 in function StartSelect (execute) [line 12976]
Regards,
Rao DHi Paul,
The user used for the upgrade may not have rights to read DBPROPERTIES. Have you reviewed this forum entry: [Invalid object name DBPROPERTIES|shadow system problem;
Not sure if that helps but thought it might provide a clue.
Thanks!
J. Haynes -
Shadow system during system upgrade
Hi All,
I am new to upgrade.I would like to know about Shadow System, how it will be created, what happens during the switch between the shadow and original system.
I had read the following blog which helped me to get clarity in the introduction part.
SUM: introduction to shadow system
Appreciate if anyone can explain and share some document on this.
Cheers,
Febin RoyHi Febin,
If you are working on SAP upgrade project you will come across to this term – shadow system or instance and system switch.The background upgrades process. Basically by upgrade we want to get the newest functions that provider offers in its software product that we are currently using. For sure we want to get this done without an interruption to existing, running system. In reality there is always some interruption. We are just trying to minimize it as much as possible. So does the SAP. The background of shadow system is to minimize system downtime during the upgrade.
Shadow system is basically copy of system that is going to be upgraded. This copies system is a bit limited to original one. It has only technical repository (SAP Basis objects) of objects and you cannot run your business processes on it. More over technical repository is upgraded into version of final release of to be upgraded system. Technically speaking it is used for modification adjustments (famous transactions SPAU and SPDD) and activation of objects. All the support packages and add-ons are imported into this instance as well. By them you get you system to the higher release. Let me mention also that shadow system run in the same database as its original system. They are running in parallel.
During preparation of shadow instance you are still running your original SAP system where all the business processes are being executed normally. At the moment when shadow instance is prepared we do its switch from shadow to original system. This is called system switch when you kind of “exchange” original system with shadow one. By that time shadow system becomes upgraded system.
Regards,
Deva -
Enhancment pack - shadow system
Hi Friends,
We are increasing the file system of the QA box as we have plans to install EHP4. As per the document it says that for shadow system we have to plan for increase of 80GB of space in the file system.
I want to be more clear is the shadow system means a copy of the whole database of the SAP system. Because our database is 1terrabyte.
can you please help me whether we have increase the shadow system to 80 GB or 1 terra byte.
Also SAP says to increase 50gb on the sapdatabase, does this mean on each of the sapdata file(1 to 4) which is 50GB * 4= 200GB no matter what the size of database.
Thanks
krisHi,
> Many thanks for the reply. How much downtime will it be required for DEV,QA and PRD during the EHP4 upgrade.
>
Downtime depends upon number of R3trans parameter, background processes, RAM and parameter optimization you will do for the upgrade.
> Will the system will not be available for the users during the EHP4 updrade.
System will not be available to user during downtime phase only. For the rest of the phase system will be available to user.
> Will it be good to upgrade during the weekends for the QA and PRD.
>
You can start your upgrade on weekdays but when downtime will come then you can stop it here and start the downtime phase on the weekend.
I will suggest you to go through upgrade guide before starting the upgrade.
Thanks
Sunny -
EHPI installer: Error while reading a dynpro. Stuck at Start Shadow First.
Hi Everyone,
I am dead in the water with my test install of EhP5 using the most current installer. This small test is on an older iseries, V5R4 with 8G memory. The SAP version is ECC 6.0 at sp Basis 23 and Applications at 19.
The install stops at Start Shadow First, but the instance and work processes are up on the server. The log- SAPehpiConsole reads:
Severe error(s) occured in phase MAIN_SHADOW/START_SHDI_FIRST!
Last error code set: RFC call to upg_is_shadow_system failed with key
RFC_ERROR_SYSTEM_FAILURE (open): Error while reading a dynpro
Please refer to these logs in the posted replys following this post for readability.
The shadow system work process wp01 log showsan RFC error as follows:
Wed Sep 14 11:29:58 2011
ABAP Program SAPMSSY2 .
Source Line 0.
Error Code DYNPRO_READ_FAILED.
Module $Id: //bas/720_REL/src/krn/dynp/dyrdypdb.c#3 $ SAP.
Function dy_dbread Line 100.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end no http/smtp
RABAX: end RX_BTCHLOG RX_VBLOG
Error while reading a dynpro.
C Wed Sep 14 11:33:59 2011
C *** ERROR => SQL-Error -204 in function db_open (dbsldb4.cpp 10630)
C {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=}_0
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
C Reopen: FALSE
B *** ERROR => dbdynpdb2: dbdd_dbtab_columns (DYNPSOURCE) failed with rc = 4
dbdynpdb2.c 2506]
B {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BZY=> unexpected return code 4 calling dbdd_dbtab [dbdynpdb 2508]
So I have a problem communicating with the shadow. Or is it a problem with the db_open?
From the test system I have an entry in SM59 to the shadow and I get this error when trying a connection test.
Error Details Error while reading a dynpro.
And trying to logon to the client sends the same message, it does not bring up the login screen.
OK. So in the 3 weeks that I have restarted, re-set and completely restored and restarted the install, I have always come to this point. I have search for similar issues and have done a review of pertinent notes etcu2026 Just as a comment, last year I successfully did the Ehp 4 upgrade without many problems on this same system using last years SAP system. In the month that I have been trying to do this, SAP has replaced the EHPI installer 3 times which indicates some problems on their part.
Any comments or suggestions would be greatly appreciated.
PatThe 2 logs from the installer are here.
The STARTSFI is as follows:
1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20110913144811")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '14', GwService = 'sapgw14'
4 ETQ399 Environment variables:
4 ETQ399 dbs_db4_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ206 Executing pre-phase DB specific actions.
3 ETQ399 Fixing IFS authorities for '/usr/sap/TEH/EHPI/abap/exe'
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '15', GwService = 'sapgw15'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWI
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
2 ETQ231 RFC Login failed
repeats the rfc call with a fail until this final entry.
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
The DEVTRACE.LOG is here:
$ Directory: /usr/sap/TEH/EHPI/abap/log
Name: DEVTRACE.LOG
trc file: "dev_disp.new", trc level: 1, release: "720"
sysno 15
sid TEH
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 100
intno 20020600
make single threaded, ASCII, 64 bit, optimized
profile /usr/sap/TEH/EHPI/abap/TEH/SYS/profile/TEH_DVEBMGS15_omni
pid 75851
kernel runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
length of sys_adm_ext is 376 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (15 75851) [dpxxdisp.c 1287]
#shared lib "dw_xml.so" version 100 successfully loaded
#shared lib "dw_xtc.so" version 100 successfully loaded
#shared lib "dw_stl.so" version 100 successfully loaded
#shared lib "dw_gui.so" version 100 successfully loaded
#shared lib "dw_mdm.so" version 100 successfully loaded
#shared lib "dw_rndrt.so" version 100 successfully loaded
#shared lib "dw_abp.so" version 100 successfully loaded
#shared lib "dw_sym.so" version 100 successfully loaded
#shared lib "dw_aci.so" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
rdisp/dynamic_wp_check : 0
rdisp/calculateLoadAverage : 1
Tue Sep 13 14:48:58 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6404]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >omni_TEH_15 <
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000050000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000050000010
DpShMCreate: allocated wp_adm_list at 700000050002970
DpShMCreate: allocated wp_adm at 700000050002b60
DpShMCreate: allocated tm_adm_list at 700000050006f90
DpShMCreate: allocated tm_adm at 700000050006fe0
DpShMCreate: allocated wp_ca_adm at 7000000504c6070
DpShMCreate: allocated appc_ca_adm at 7000000504d3b40
Directory: /usr/sap/TEH/EHPI/abap/log
Name: DEVTRACE.LOG
DpShMCreate: allocated comm_adm at 7000000504e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000005056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000005056e110
DpShMCreate: allocated j2ee_adm at 70000005056e150
DpShMCreate: allocated ca_info at 70000005056e950
DpShMCreate: allocated wall_adm at 70000005056e9d0
DpCommAttachTable: attached comm table (header=7000000504e1610/ft=7000000504e1620)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsStdUnamFileMapInit: ES base = 0x7000000a0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
Tue Sep 13 14:48:59 2011
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 13097]
Tue Sep 13 14:49:02 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( omni) [dpxxdisp.c 12339]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >omni_TEH_15 <)
DpStartStopMsg: start msg sent
Tue Sep 13 14:49:11 2011
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Sep 13 14:50:24 2011
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms.new", trc level: 1, release: "720"
[Thr 01] Tue Sep 13 14:48:39 2011
[Thr 01] MsSOsPrivInit: Run priority adjusted to 12
[Thr 01] ms/http_max_clients = 500 -> 500
[Thr 01] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 92
intno 20020600
make multithreaded, ASCII, 64 bit, optimized
pid 75850
[Thr 01] Tue Sep 13 14:48:40 2011
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 75850) [msxxserv_mt. 2274]
[Thr 01] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 01] load acl file = /usr/sap/TEH/EHPI/abap/TEH/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01] 1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
[Thr 01] 2 : [127.0.0.1] LOOPBACK (LOCALHOST)
[Thr 01] MsHttpInit: full qualified hostname = omni.plastekgroup.com
[Thr 01] HTTP logging is switch off
[Thr 01] MsHttpOwnDomain: own domain[1] = plastekgroup.com
[Thr 01] *** I listen to port 3615 (3615) ***
[Thr 01] CUSTOMER KEY: >H1357713078<
[Thr 01] build version=720.2011.05.04
trc file: "dev_rd", trc level: 1, release: "720"
Tue Sep 13 14:49:07 2011
***LOG S00=> GwInitReader, gateway started ( 75855) [gwxxrd.c 1758]
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 96
intno 20020600
make single threaded, ASCII, 64 bit, optimized
pid 75855
gateway runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
gateway (version=720.2011.04.20)
Tue Sep 13 14:49:10 2011
gw/reg_no_conn_info = 1
gw/local_addr : 0.0.0.0
gw/reg_no_conn_info = 1
SWITCH TRC-RESOLUTION from 1 TO 1
CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: Initalized shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1002.
CCMS: AlMsUpload successful for /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/log/ALMTTREE (0 MTEs).
Bind service sapgw15 (socket) to port 3315
GwIRegInitRegInfo: reg_info file /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/data/reginfo not found
GwPrintMyHostAddr: my host addresses are :
1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
2 : [127.0.0.1] LOOPBACK (LOCALHOST)
Full qualified hostname = omni.plastekgroup.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpIPCInit2: read dp-profile-values from sys_adm_ext
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000060000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000060000010
DpShMCreate: allocated wp_adm_list at 700000060002970
DpShMCreate: allocated wp_adm at 700000060002b60
DpShMCreate: allocated tm_adm_list at 700000060006f90
DpShMCreate: allocated tm_adm at 700000060006fe0
DpShMCreate: allocated appc_ca_adm at 7000000604d3b40
DpShMCreate: allocated comm_adm at 7000000604e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000006056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000006056e110
DpShMCreate: allocated j2ee_adm at 70000006056e150
DpShMCreate: allocated ca_info at 70000006056e950
DpCommAttachTable: attached comm table (header=7000000604e1
MtxInit: -2 0 0
DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 fro
Tue Sep 13 14:50:14 2011
GwDpInit: attached to gw_adm at 70000006056e110
Tue Sep 13 14:50:16 2011
DpSetProcessPriority: Run priority for gwrd adjusted to 12 -
SEVERE ERROR: Starting system failed, rc=0
Hi Experts
I am having problem in SRM 2.0 to SRM 5.5(NW 7) Upgrade. I have problem in startup of Shadow Instance. Here is log description.
more DEVTRACE.LOG
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 01] Wed Jan 9 17:56:30 2008
[Thr 01] WLM Tag 'ED2/MSG' successfully set for this process
[Thr 01] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 4722694
*[Thr 01] **LOG Q01=> MsSInit, MSStart (Msg Server 1 4722694) [msxxserv_mt. 1824
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] load acl file = /usr/sap/put/ED2/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 01] HTTP logging is switch off
*[Thr 01] **LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp
p 3174]
*[Thr 01] *** ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 8*
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:8100) [nixxi.cpp 3174]
*[Thr 01] *** ERROR => MsHttpCommInit: Ni2Listen(8100) (rc=NIESERV_USED) [msxxhtt*
p_mt. 3444]
*[Thr 01] *** ERROR => MsHttpPortBind: MsHttpCommInit (port=8100) [msxxhttp_mt. 3*
847]
*[Thr 01] *** HTTP port 8100 state CLOSED ****
[Thr 01] MsHttpOwnDomain: own domain[1] = ent.agt.ab.ca
[Thr 01] ms/icf_info_server : deleted
*[Thr 01] *** I listen to port sapmsSHDED2 (3605) ****
[Thr 01] CUSTOMER KEY: >N1501146322<
more STARTSFI.LOG
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080109175630")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPED2
4 ETQ399 auth_shadow_upgrade=1
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_ora_schema=SAPED2
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX
_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/ED2/SYS/exe/run
4 ETQ399 ext. env.: LIBPATH=/usr/sap/ED2/SYS/exe/run:/usr/lib:/lib:/usr/sap/ED2/
SYS/exe/run
4 ETQ399 2008/01/09 17:56:30: put_execute: (startsap) forkpid:9027768
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
You help & time in this matter will be highly appreciated.
Thanks & Regards
JigneshHi Marcus
Thanks for quick response. I did same exercise earlier. Shadow Instance started without dispatcher.
iedm3330dd:ed2adm> ps -ef | grep ED2_DVEBMGS01
ed2adm 4817018 7942216 0 09:16:45 - 0:00 ms.sapED2_DVEBMGS01 pf=/usr/s
ap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4821170 7942216 0 09:16:45 - 0:00 co.sapED2_DVEBMGS01 -F pf=/us
r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4849734 7942216 0 09:16:45 - 0:00 se.sapED2_DVEBMGS01 -F pf=/us
r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4853912 8847520 0 10:01:29 pts/1 0:00 grep ED2_DVEBMGS01
Log file :
iedm3330dd:ed2adm> pwd
/usr/sap/put/ED2/DVEBMGS01/work
iedm3330dd:ed2adm> more dev_disp.new
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid ED2
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: single threaded, ASCII, 64 bit, optimized
pid 4853984
Thu Jan 10 09:16:46 2008
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 4853984) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 111 successfully loaded
shared lib "dw_xtc.so" version 111 successfully loaded
shared lib "dw_stl.so" version 111 successfully loaded
shared lib "dw_gui.so" version 111 successfully loaded
shared lib "dw_mdm.so" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
WARNING => DpNetCheck: NiServToNo(sapdp01) failed (rc=-3)
ERROR => DpNetCheck: NiServToNo(sapgw01) failed (rc=-3) [dpxxtool2.c 5223]
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust t
he DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >iedm3330dd_ED2_01 <
DpShMCreate: sizeof(wp_adm) 7488 (936)
DpShMCreate: sizeof(tm_adm) 4957464 (24664)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548040/548048
DpShMCreate: sizeof(comm_adm) 548048 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1616)
DpShMCreate: sizeof(wall_adm) (22440/36712/56/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 7000000000a6000, size: 5603560)
DpShMCreate: allocated sys_adm at 7000000000a6000
DpShMCreate: allocated wp_adm at 7000000000a7ba0
DpShMCreate: allocated tm_adm_list at 7000000000a98e0
DpShMCreate: allocated tm_adm at 7000000000a9940
DpShMCreate: allocated wp_ca_adm at 700000000563e58
DpShMCreate: allocated appc_ca_adm at 7000000005684a8
DpShMCreate: allocated comm_adm at 700000000569c18
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 7000000005ef8e8
DpShMCreate: allocated gw_adm at 7000000005ef968
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 7000000005ef998
DpShMCreate: allocated wall_adm at 7000000005ef9a0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ERROR => DpIPCInit2: NiServToNo failed (--3) [dpxxtool2.c 511]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 10 09:16:56 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jan 10 16:16:56 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl Us
er Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Thu Jan 10 16:16:56 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c 1870]
Dump of tm_adm structure: Thu Jan 10 16:16:56 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Jan 10 16:16:56 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 10 09:17:01 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >iedm3330dd_ED2_01 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x110750af0 )
ShmKeyPermission( 76 ) = 0740 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 1, 3 )
ShmCreate( 1, 0, 2, -> 0x7000000000a4000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 2, 3 )
ShmCreate( 2, 0, 2, -> 0x7000000000a6000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 3, 3 )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x700000030000000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 14, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 11, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 33, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 42, 0, 2, 0xfffffffffffec78 )
Profile configuration error detected, use temporary corrected setup
Shared Pool 40: ipc/shm_psize_40 = 68000000 (too small)
Shared Pool 40: (smaller than default 112000000)
Shared Pool 40: (default size assumed 112000000)
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 43, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 45, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 44, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 54, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 46, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 47, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 64 ) = 0740 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 65 ) = 0740 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 9 ) = 0740 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 8 ) = 0740 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 17, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 18 ) = 0740 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 6 ) = 0740 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 34, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 58, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 7 ) = 0740 (octal)
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 51, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 77 ) = 0740 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 78 ) = 0740 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 52, 3 )
ShmCreate( 52, 0, 2, -> 0x700000000600000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 30, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 70 ) = 0740 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 56, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 10, 3 )
ShmCreate( 10, 0, 2, -> 0x700000000000000 )
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 57, 0, 2, 0xfffffffffffec78 )
ShmCreate( 10, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 10 ) = 0740 (octal)
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0xfffffffffffed60 )
ShmKeyPermission( 62 ) = 0740 (octal)
ERROR => ShmCleanup(62) failed 3 [mpixx.c 3239]
MpiCleanup() -> 1
removing Semaphore-Management
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0xfffffffffffed70 )
ShmGet( 10, 31, 0, 2, 0xfffffffffffebf8 )
ShmCreate( 10, 0, 2, 0xfffffffffffea18 )
ShmKeyPermission( 10 ) = 0740 (octal)
ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c 431]
closing connect handles (dgm + tcp)
***LOG Q05=> DpHalt, DPStop ( 4853984) [dpxxdisp.c 10631]
shutdown completed - server stopped ***
I have already requested for port entry change in services file.
Jignesh
Maybe you are looking for
-
Port forwarding for clientless SSL VPN access
Hello, I am currently trying to set up clientless SSL VPN access for some remote sites that our company does business with. Since their machines are not owned by my company, we don't want to install/support a VPN client. Therefore, SSL is a great opt
-
Adding field in standard report
Hi, I have copied the standard table RM07MLBD(T-code MB5B) into Z-Report. Now, i have to add a field LSMNG into the list output of the report. How to do that.? Plz help.!
-
Iphone keeps restarting.
As i was resetting the contents and applications on my iphone i did realize that the iphone was going to die, due to a flat battery. Half way through the process the iphone died. Charged the phone for good twenty minutes and powered it back up. Now i
-
RMAN> register database; database registered in recovery catalog RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =============================
-
11 g oca path (pls clarify this; many thanks)
EXAM 1Z0-007 Introduction to Oracle9i SQL® or 1Z0-047 Oracle Database SQL Expert or 1Z0-051 Oracle Database 11g: SQL Fundamentals I + EXAM Oracle Database 11g: Administration I 1Z0-052 = oracle Database 11g Administrator Certified Associate now my qu