Shake 4.1, maverick, final Cut pro X

I have a copy of Shake 4 coming, will it work with Final Cut Pro X and Maverick?

I really doubt it. Shake is very, very old.

Similar Messages

  • Since upgrading to Mavericks, Final Cut Pro X has challenges uploading videos to You Tube

    Since upgrading to Mavericks OS X, when I upload a video from Final Cut Pro to You Tube it takes several tries to upload. The error message is: "Unable to share video to You Tube, Network Connection Timed Out (or Lost.(" On average it takes at least four tries. This absolutlely did not happen before the Mavericks upgrade. Any help would be appreicated.

    Typically people who run old OS versions hold on to them because certain software versions are most stable on that OS. (Or because their hardware doesn't support later versions.) And they are loath to try and do anything to disturb that eco system – accepting the fact that they are running a system that is no longer supported by the manufacturer and often the applications' developers.. For whatever reason, you disturbed that eco system by reinstalling the OS..
    Final Cut didn't upgrade itself. It's just that the version you had that was "running like a dream" is no longer available from the App Store…for your OS.
    If you want some ways out, either: restore the app from your system backup; upgrade your OS to at least Mountain Lion and you may he able to download an older version of Final Cut; or create a separate bootable volume and install a later OS that will support 10.1.x.
    Russ

  • Sending shake video BACK to final cut pro?

    hey guys
    im still sort of new to shake
    i took a clip in fcp highlighted it, and chose "send to shake"
    it then opened up shake and i did some compositing. i also saw that it automatically made an extra video layer in fcp with the shake seq
    after editing, i scrubbed through the fcp time line and saw the clip wasnt updated...so i guess i need to do something with the file out in shake?
    do i need to render it or something or is there a way to just have it update
    it would be awesome cause its already lined up fine in the timeline and everything!
    thankyou

    Unlike Motion, it doesn't embed the Shake project - it embeds the placeholder QuickTime movie, so you must render the FileOut whenever you make changes.
    Also, the new video track is disabled by default so you will need to click the button to the left of the track to enable it.

  • Can't open final cut pro 7 after updating mavericks 10.9 !!

    when i update mac os x from lion to mavericks
    final cut pro 7 do not opened !!
    final cut pro x is opened but i prefer to to use fcp7 >>

  • Acquisition vidéo (flux direct) sur JVC GR-D73 = Final Cut Pro ou iMovie

    Je n'arrive pas à acquérir une vidéo sur mon camescope JVC GR-D73 (flux direct avec magnétoscope analogique) ?
    J'ai le même problème avec iMovie 10.0.0.1
    j'ai la version 10.9 (Mavericks)   final cut pro v10.0.0.9
    Merci pour vos lumières ... cela fonctionnait correctement avec 10.8 (Mountain Lion)

  • Error when downloading Final Cut Pro 10.1.3

    My specs
    When I first got his MacBook about a month ago, I was still using Mavericks. I bought Final Cut Pro and it downloaded just fine. I upgraded to Yosemite shortly after it became available.
    I found soon after that supplemental updates for FCP were hard to install properly (I would press the Install button, it would say Installing then go back as if nothing had happened). After consulting a few articles, I decided the best to do was to delete FCP and re-install it.
    I consulted this article, which explains how to thoroughly uninstall FCP on Mavericks Final Cut Pro X 10.1: How to remove and reinstall Final Cut Pro X - Apple Support and followed its directions. Then I restarted my computer.
    When I try to download and reinstall FCP from the Purchases section of the App Store, I watch the download bar reach 2.28 GB (full download) then receive an error message.
    This is what I'm left with:
    I've done this a few times. I'm not sure what the problem is. Any suggestions?

    This is what's in my Applications folder:
    I've seen this several times also. I'm stumped.

  • Plugin for Export Project to shake like in Final Cut Pro

    Hi
    Is there a plugin or a way to just move it from Final Cut Pro 6 that will let me export to shake from Final Cut Express Like in Final Cut Pro.
    If i can just move it from Final Cut Pro plugin folder or something.
    I have Final Cut Studio 2
    my friend Has Final Cut Express And Shake 4.1

    Ok so it does not change the quality of the video. And how does the send to shake work does it just add a link to the movie then when done in shake it exports to a new movie file with edits.
    He decided
    He will just open the movie that needs effects in Shake edit it Then export it. Then open the movie in Final Cut Express And put it all together. And Done
    Thank you for you Help Tom.

  • How to export from Final Cut Pro after downloading Maverick

    Final Cut Pro no longer exports after installing Maverick.  I get this: The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)  - have paid for Compressor and instaled it - but it makes no difference.

    But how do I update Final Cut Pro 10.0.3?  Apple says all my updates for everything are fine.  It worked well before I installed Maverick, and now I can't get any of my short films out of it!  They won't copy over to IMovie so I have to start again and basically scrap Final Cut Pro - which seems a bit unfair just for updating to Maverick.  Makes the free download a bit pricey in the long term.

  • Can the first version of Final Cut Pro X (10.0) run on Mavericks?

    I purchased Final Cut Pro a while ago when it was first new, but I had been locked out of that account, so I couldn't update it. My question to you is can I run Final Cut Pro X 10.0 on Mavericks?

    Delete Final Cut Pro X completely by using Final Cut Remover from here: Digital Rebellion
    empty trash
    Log into Mac App Store and Install FCP X, the latest version will be installed

  • I just updated to new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. when it comes back to tcp x it's black.

    I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes back to final cut pro x all black even after render. By the way on the MBL i am using the GPU rendering, I used before like 4months ago and it was fine. And i don't like to use the CPU because it very slow.

    What is the frame rate of the project? At what frame rate was the media recorded? What frame size?
    What are the audio settings?
    What are the specs of the machine, in particular how much RAM, how is the hard drive connected, etc.?
    If possible, post screenshots of the inspector for the project.
    It could be related to the audio frequency?

  • Final Cut Pro X and Mavericks

    I am running Lion on my iMac. I have a lot of videos on an external connected harddisk.
    I want to buy AppleTV to show my videos on my HD TV.
    My iMac from midt 2010 has a 3,3 GHz Intel Core i3 prosessor  and 4GB 133 MHz DDR3 memory.
    OS X Lion 10.7.5.
    Will Final Cut work with Mavericks or will Mountain Lion do?

    Welcome to Apple Support Communities
    Final Cut Pro X will work without any problem in your Mac. Note that the most recent Final Cut Pro X version (which is the only one available in the Mac App Store) is only compatible with OS X Mavericks, so you should run OS X Mavericks.
    The only problem you have is that your iMac is "too old" (in case you are a professional user that needs the best performance) with an "old" GPU. This means that you should not expect the same experience as on a Late 2013 iMac or the Late 2013 Mac Pro.
    Note that you do not need Final Cut Pro to watch videos, because it is an app to create videos and movies. I tell you this because you only mention that you have a lot of videos, in case you thought you need Final Cut Pro to watch them

  • SteadyCam in Motion or Shake or Final Cut Pro????

    I have footage I need to steady, and I would like to know which does Steady-Cam better? Shake, Motion, or Final Cut Pro? Thank you.

    Howdy,
    Actually, Motion and FCP both use the same optical-flow-based stabilization technology, which is a newer version of what's in Shake. In FCP, it's called SmoothCam. In Motion, it's done via the Stabilize behavior. Also, if you've already done your SmoothCam analysis in FCP and then you send the clip to Motion, the analysis will be usable in Motion (no need to re-analyze).
    The nice thing about doing the stabilization in Motion is that you can play with it while playing back, allowing you to interactively adjust how the smoothing is applied. In Shake, you'd have to make a change, render a flipbook, make another change, render again, etc.

  • Mavericks and Final Cut Pro 7 - Log and Transfer crashes

    Hi all. I (perhaps unintelligently) upgraded to OSX Mavericks on my Mac Pro while working on a project in Final Cut Pro 7. What is good news is that FCP 7 still works for the most part. The bad news is that Log and Transfer crashes.
    I have a Panasonic P2 camera and I dump video via FireWire 800. When I first click on the Log and Transfer button, nothing happens. When I click on it again, the Log and Transfer window opens, but then FCP 7 crashes.
    Is there any way to get video from my P2 card into the project without Log and Transfer?
    Also, would any of these options work?
    Trash preferences (working to figure out how to do that on Mavericks)
    Worst case, re-format and re-install Lion (Don't have much time to do that)
    Please let me know if you have a work around or a fix for this. I need to have this solved TODAY.
    I appreciate your help in advance.

    I am having the same issue on my iMac that was udated to Mavericks a while back and apparently I haven't tried to log and transfer anything since.
    The error comes up everytime I have a my Sandisk High Speed Card in my lexar Fire Wire 800 card reader. The Log and Transfer screen pops up and it starts adding the clips and instead of populating the screen, it crashes. Mine also says FCP quit while using the canonIHL plug in, here's a screen shot of the indication.
    I agree, this needs to be resolved ASAP. I'm dead in the water. The only thing I can do is transfer the raw files into a folder somewhere, then import the clips, but then to have them as ProRes files I guess I would have to use compressor before hand. I've done it before, but it never runs as smoothly without it being natively imported.

  • I just installed Maverick on my Mac, now I can't open Final Cut Pro!

    I just installed Maverick on my Mac. When I started Final Cut Pro, I got the message that probably it doesn't work with Maverick.
    Before that moment it was also impossible to update Final Cut Pro.  App Store directed me to Apple Menu looking for updates, and the Apple Menu directed me tot the App Store. Sounds familiar to someone?

    The GM of Mavericks that I tried out shortly before Mavericks actually came out worked great with FCPX until I tried to import something into FCPX. The import window would open and then nothing. Wouldn't let me do or choose anything. Always had to force quit it. So, I'm a little hesitant to upgrade today.

  • Why can't I use final cut pro 7 with Mavericks?

    Why can't I use final cut pro 7 with Mavericks? Is any one else having problems? All my media is reputedly "offline" even though I can see all the files. Using the reconnect to media function doesn't do a thing. All of my previous projects are the same. Any ideas would be most welcome!

    Because it is $299.99, and there is tax.
    Cheers,
    GB

Maybe you are looking for

  • How to control an error message to display at the status bar or in a popup?

    Hi experts, I find that one of the error message in an user exit display at the status bar in some conditions while display in a pop up window in other conditions. Is there some way to control its display style as I want it? Thanks in advance.

  • PO approver with WBS Element authorisations

    Good afternoon We have as a step in the approval of the Purchase Order, the approver for the WBS Element. We need to restrict this approval based on the WBS Element, which means that we should avoid a user to approve a Purchase Order if that Purchase

  • Posting twice on JSSE socket

    Has anyone run into a problem of a POST request being sent twice on one call - the first time the data is sent without request for authorization and the second time with authorization information. Using a net mon I see the two Posts in different fram

  • Smoothing video in CS6

    hi I need an urgent help, I have imported an FLV video in flash pro cs6 and now trying to add a script to make it look smooth when resized. I googled for days and couldn't found a straight answer, how can i use this code to smooth the video when resi

  • I need help, for os 6 for curve 9300 ...

    Hello I've recently installed 6 operating system on my phone by ( blackberry desktop software ) and I had this message when I send a broadcast message, to all contacts in bbm , then bbm closes.. uncaught exception: aapplication net_rim_bb_qm_peer(266