Shake to shuffle sound - possible to turn it off?

When you use the "shake-to-shuffle feature", it stops playing the current song, then an annoying sound plays before it starts playing a new song.
I can't find how to turn that off, when the pod is attached to a soundsystem at a higher volume level, that shake-to-shuffle sound is really too loud. I really don't understand why they made it like that, and chose such a stupid sound...

If you use shake to shuffle, you are probably not looking at the screen, so the sound serves as acknowledgement. It's just a cute feature Apple threw in there to take advantage of the accelerometer. I don't think they wanted to make it overly complex.
You can send Apple direct feedback here.
http://www.apple.com/feedback/

Similar Messages

My ht-ct80 sound bar keeps turning itself off every 15min.

4 days ago I bought a htct80 sound bar and it keeps turning itself off every 15min. I serched the internet for a solution to no avail. So I need a answer from sony. Its a great sound bar while its on. Please give me a solution or i will have to take it back for a refund this weekend. If anyone else is having this ptoblem. And i know there are many please reply to this post. The more that reply the more likely we will get a rwsponse from sony.

Hello everyone,
The Sound Bar turning off every 15minutes is related to the Auto Standby function due to the Sound Bar not receiving an input signal. Unfortunately, there are two conditions where the sound bar will recieve a low input signal that results in the Auto Standby triggering incorrectly.
The first case is when the TV’s headphone jack serves as an audio output jack. This is not a recommended method for Audio Input for the Soundbar. If you are using this method, check the TV’s audio output settings. For details, refer to the TV’s operating instructions. If you can not change audio output setting, set up TV volume which is strong enough to prevent it from entering Standby mode.
The second case is when you are using a set-top box (Cable box) that has a volume setting. You can either change the Audio Settings on the set-top box for Fixed Audio Out (if available) or increase the volume on the set top box(Cable box) to maximum setting and then adjust the volume on the Sound Bar itself to obtain the desired actual volume.
Thank you,
---Chris

Sound when i turn on/off mobile

When i open my cp lenovo A5000 theres a sound of lenovo but when i turned it off no sound at all. When i checked the settings of my cp it was enable ...please help if its theres any problem or is it as ease whenbi turn off my mobile is no sounds just a vibrate???
Moderator comment: Please refrain from bumping your thread(s) / post(s) more frequently than 3 days. Doing so, unfairly, pushes other members' threads downwards. Bumping post(s) removed.

A5000_S025_150121_8G_ROM

Schedule possible to turn on/off the radio/WIFI transmission?

I want to know whether it's possible to set-up a schedule to turn on/off the radio/WIFI transmission for the Airport TimeCapsule?
For example: WIFI (radio) is turned off every evening at 23:00 hour and turned on again at 07:00 in the morning

Yes, it is there is in the setup.
Go to the network tab
Click on Enable Access Control and then Time Access Control which will open a second menu page.
Remember if you want an off time like 11pm and on time at 7am it is a different day.
So you set off from 11-11.59pm and 12.01-7am next day.
A 10sec google ..
http://9to5mac.com/2013/10/06/how-to-set-time-limits-on-your-wi-fi-network-using -airport-utility/
https://discussions.apple.com/message/22836329#22836329

If I want to open the same website in a second tab and press Ctrl+T and start typing the website title or URL, why does Firefox 4 insist on switching to the first tab? Is it possible to turn this off?

I regularly need to open the same website in two tabs, to be able to view changes made between opening the first and second tabs. In Firefox 3.x I could press Ctrl+T and start typing the website title or URL, which would be auto-completed by Firefox. This enabled me to quickly open the same website in a second tab. Firefox 4 does not do this, instead it wants me to switch to the existing tab. This is not what I need.
Of course it is possible to open the same website in a second tab via e.g. a bookmark, but this takes more time and effort. It would be great if I could select Firefox's behavior in this situation.

To create a duplicate of an existing tab in Firefox 4, do one of the following:
*middle-click the icon on the left end of the URL/Location/Address Bar
*hold down the Ctrl key and drag the tab until a small arrow appears at the border between tabs, then release the mouse button, then release the Ctrl key.
 
 
You have multiple Java Console extensions because Java did not clean up after itself when updating; Firefox button > Add-ons > Extensions OR, using the Menu Bar, Tools > Add-ons > Extensions:
*Java Console 6.0.17, Java Console 6.0.19, Java Console 6.0.20, Java Console 6.0.21, Java Console 6.0.22, Java Console 6.0.23
Using the instructions here:
*http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
you can delete the following folders:
*{CAFEEFAC-0016-0000-00'''''17'''''-ABCDEFFEDCBA}
*{CAFEEFAC-0016-0000-00'''''19'''''-ABCDEFFEDCBA}
*{CAFEEFAC-0016-0000-00'''''20'''''-ABCDEFFEDCBA}
*{CAFEEFAC-0016-0000-00'''''21'''''-ABCDEFFEDCBA}
*{CAFEEFAC-0016-0000-00'''''22'''''-ABCDEFFEDCBA}
*{CAFEEFAC-0016-0000-00'''''23'''''-ABCDEFFEDCBA}
You can leave {CAFEEFAC-0016-0000-00'''''24'''''-ABCDEFFEDCBA}
 
 
'''You need to update the following:'''
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Adobe PDF Plug-In For Firefox and Netscape "9.3.3"
*Shockwave Flash 10.2 r152
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

Possible to turn Edge off? Power saver?

I realize now Edge is always enabled. As an energy saver can the Edge component be switched off?
Is the Edge component a significant drain on the battery in stand-by mode?

You do not need to worry about Edge draining your battery when in standby. I use my phone very little, a few short calls a day, manually checking my e-mail several times, and the calendar, (so it is mainly in sleep mode) and I can go at least three days without even getting the red 20% warning.

Possible to turn off MBP Sleep Light?

The sleep light on my MBP is bright. The pulsing can actually wake me up. Is it possible to turn it off?
The iMac G5 got a "Sleep Indicator Light" update that turns it off at night. I'm not sure if it's configurable or not, but even if it's not, the MBP could use the same update.
Thanks.
Macbook Pro Mac OS X (10.4.7)

The solution is quite easy... actually the same for getting that nasty blinking "12:00" off your VCR
Place electrical tape over it...
But seriously - you may want to go to an auto parts store - they sell "chrome tape pinstriping".
Cut out the pinstriping to the size of the button, and you have your solution.
Or you can go to your local vinyl shop and find someone to cut one for you (then mass produce it for you) and sell it to other MBP users that want the same thing... wait, no I'm going to do that PATENT PENDING!!!!!

Is it possible to turn off my 4s without using the sleep/wake button?mine has broken but prefer to turn off overnight and when in work

As above!

It's no possible to turn it off without the sleep/wake button. You can use the mute switch while at work and at night.

What does it mean when my MacBook makes a clicking sound, and when I turn it off and back on again all I get is a folder icon with a ? in it?

My MacBook made a clicking sound. I turned it off for 5 minutes, then restarted it. Now all I get is a folder with a ? on it. Is my battery fried?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'llsee a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

MBP turns itself off just 2 seconds after I turn it on

Hi,
Since yesterday my 15" MacBook Pro (older model)cannot boot. When I turn it on, I hear the fan starting, the white light lits up, and after 2 seconds (hence before the Mac startup sound), the laptop turns itself off! With this same typical sound on the left hand side corner as when you force it off by pushing the power button for 10s (which I didn't do here).
I've tried the recommendations on the help page http://support.apple.com/kb/TS1365?viewlocale=en_US. I've also checked if the RAM was properly in place. And of course, I tried with and without the MagSafe and the battery.
When I turn the MacBook Pro on and keep the power button pressed, it stays on for like 5 seconds, until the white light flashes 3 times, then after another second or so, turns itself off again.
What's going on?
Thanks!
Tibo.

Hi T,
IIRC, the three flashes (used to be beeps) indicates bad RAM. Do you have any other compatible RAM available to try?
Message was edited by: tjk

TS3474 My iPod shuffle operation isn't working and keeps playing the same tune! The shake to shuffle is turned off. Any ideas? Thanks!

My iPod nano has suddenly stopped shuffling tunes and just repeats the same track. The shake to shuffle is off - any ideas? Thanks!

It sounds like the repeat setting has been enabled. See page 21 of your iPod's User Guide for instructions on turning it off.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock

Can't Turn Of "shake to shuffle"!!!! iTouch 2G iOS 4.2.1

I feel I have a very unique problem, I can't turn off the Shake to Shuffle mode (I'm going to call it S2S.) Before you say it, I know HOW to turn it off, but it won't actually let me. Actually, I can't change any of the settings in the "music" tab under settings. I change it and play around with other settings, then check back before exiting the settings app and it's the way I set it up. However, after I exit out of the settings and then immediately go back in, everything under the "music" tab is set back to default.
I've tried everything short of a full restore, simply because I JUST put my music on and I don't wanna go through that again! lol I've done the power+home button reset several times and tried to see if there were software updates, etc. Nothings worked!
Usually wouldn't be a big deal, but it always shuffles during my favorite songs. Also, the music player has been randomly stopping in the middle of a song. Not pausing, but stopping, as in there is no "now playing" but it happens on something like song 50 out of 1500, so its not like it was the end of the album...
Any help for either problem?

had to reset it and set up as new ipod. lost music, but it works fine now.

When I play my Ipod shuffle 3rd gen there's a moment when I start hearing interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.

My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down. First I thought it was the earphones, but I exchanged them for newer ones and so far its the same

You may want to do a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings. If it's a software or data corruption glitch, the Restore should fix it. After the Restore, reload or resync your songs, and try it again. As a test, you may want to initially select a small number of songs to put back on the shuffle.

Iphone 4 music shuffle cannot be turned off. The shuffle is turned off on top of the page, shuffle on individual songs is turned off and the settings "shake to shuffle" is turned off also, but the songs keep shuffling in my album. Please Help.

Iphone 4 music shuffle cannot be turned off. The shuffle is turned off on top of the page, shuffle on individual songs is turned off and the settings "shake to shuffle" is turned off also, but the songs keep shuffling in my album. Please Help.

Hi Jennifer,
Thanks for visiting Apple Support Communities.
I'd suggest trying the steps in our iPad assistant first:
https://www.apple.com/support/ipad/assistant/ipad/
Regards,
Jeremy

Is it possible to turn off the sound and just vibrate for incoming email?

Is it possible to turn off the sound on my Verizon iPhone 4 and just have it vibrate for incoming email. Can't seem to find any way to do this!

You could either flip the mute switch or go to Settings > Sounds > New Mail = Off

Shake to shuffle sound - possible to turn it off?

Similar Messages

Maybe you are looking for