Shaking and jerkiness when moving from applications

when i move from Safari to mail or move open window to task bar i get this jerkiness or hesitation.
has only shown up this fault since i installed leopard....anyone have any ideas to resolve this?
Thanks in advance
Imac G5 1.8 processor with 1 gig of ram.

Sorry for not answering before.
I have never had a crash on 1.3. I have problems with the Sun JVM 1.3 hanging in Windows 98, but it works fine on Windows 2000. Our tooltips are created from the awt thread, and the tool tip thread calls EventQueue.invokeLater when it wants to remove the tool tip. Thus it the screen is always updated from the awt thread.

Similar Messages

  • Hangs and crashes when moving from M$ to Sun

    I am currently moving a 50000 lines applet from Microsofts JVM to Sun's. However, on Windows 98 the applet hangs when using the Sun JVM 1.3.X. Of course I have used EventQueue.invokeLater and EventQueus.invokeAndWait to ensure that all updates are handled on the AWT event thread. Further, I have inserted in nearly every routine a test that checks that it is executed on the AWT thread. Thus I am close to certain that it is not due to AWT code being executed on other threads than the AWT event thread.
    Further, when I execute the applet on Sun's JVMV1.4.X it crashes and takes down the browser (IE or Netscape 6.2) too. The crash dumps indicate that this happens in the AWT library, possibly during Event scheduling. However, the program counter of the Intel microprocessor is not valid and thus the JVM cannot make a stack dump.
    What am I doing wrong?

    Sorry for not answering before.
    I have never had a crash on 1.3. I have problems with the Sun JVM 1.3 hanging in Windows 98, but it works fine on Windows 2000. Our tooltips are created from the awt thread, and the tool tip thread calls EventQueue.invokeLater when it wants to remove the tool tip. Thus it the screen is always updated from the awt thread.

  • Iphone5 - lost my contacts when moving from BT Yahoo to BT Mail. I do not back up to iCloud and I did not use my mail account for contacts.  Can anyone help to find and restore my contacts?

    IPhone5. I have lost my contacts when moving from BT Yahoo to BT Mail. I do not backup to iCloud and do not use my mail account to store contacts.  Can anyone help find the contacts on my phone and restore them?

    Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
    Have you failed to use the device as designed?

  • I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

    I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

    Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
    When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
    Exchange 2003 server into the domain/forest. 
    You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
    So it sounds like you are not looking in the right location within ADSIEdit. 
    You may find the following article also helpful for this issue which is the same resolution:
    http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
    I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
    http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

  • Photoshop CS6 a little 'jerky' when moving layers & resizing window (Macbook Pro Retina 650m)

    As title says, when I open Photoshop CS6 and simple make a new layer and either use the type tool, it appears to be a little Sluggish/Jerky when moving the layer around.. The same applies when resizing photoshop itself.
    I'm updated to the latest version of CS6 and have tried all the combinations in the 'Performance' section of Photoshop.
    My Macbook Pro Retina is the 3.4ghz 650m and 8GB RAM offering (OS Mavericks). It's really annoying me as even my old laptop could run it smoothly and that was an i5 and much lower-end graphics card.
    The only way I can really describe it (and i'm no tech professional) is when comparing it to silky smooth 60 fps, it looks like it's skipping frames and in term looking 'jerky'. I also use Illustrator and don't really witness the same problem with it.
    I know this may have been asked quite a bit.. But I've never found the solution.. Could anybody advise me on what it potentially could be down too? (Might I add the laptop has just had a fresh install of the OS and a fresh copy of CS6)

    You could check through the GPU FAQ for anything you might have missed
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
    You say you have tried all settings in Performance, but I wonder what your  cache levels are set at?  If more than 1, then OK.
    There's the general performance FAQ (no doubt lots of overlap)
    http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
    Is this with all image docs, or particular ones?  For instance I have been playing with using ACR to process 32bit HDR files, and it puts a huge load on the system.

  • Performance issue when moving from 4.6c to 6.0

    Looks like we took a performance hit when moving from 4.6c to 6.0 on the same hardware. 
    For example, our PGI on outbound deliveries now takes several seconds longer in 6.0 then it did in 4.6c.  We've noticed other SAP area's are taking longer as well.  With an ST05 sql trace on the PGI in 6.0, we see more tables being accessed, same tables being access differently taking longer.  All leading to more time to do a PGI in 6.0.
    Has anyone else noticed this increase in Response time when upgrading to 6.0 ?   
    Thanks,
    David

    Hello.
    Yes, in our system we noticed the same thing at start. The general performance seemed to get worse after upgrading. In fact, database became bigger and more memory is consumed. However, it was tuned up by our system administrator and now seems ok.
    Run the optimizer statistics and see if it get's better.
    Regards.
    Valter Oliveira.

  • When moving from one master block to detail block  it must save record.

    when moving from master block to detail block it must save record or it will give message like 'save changes '....
    when i write it ,but this message will be coming.
    But if i save record message will appear two times.
    plz Help me.
    Thanks & Regards
    Venkata.
    Message was edited by:
    venkata

    Hi,
    you could ask for Form_Success when moving to detail_block (in wehn-new-block-instance i.e.) and if not form_success you could show an alert to ask for commit changes...
    Jose.

  • Lightroom encountered and error when reading from it preview cache and needs to quit

    A power outage caused my Lightroom 5.2 to shut down without closing.  When I powered back up and opened lightroom it gives me an error "Lightroom encountered and error when reading from it preview cache and needs to quit" and then it says it will try to fix it the next time it opens. I have opened it 20 times and it is not fixing it. I removed the program completely and upgraded to 5.5 AND it is still giving me the same error.  Is my catalog corrupt or something? I had it set to automatically load the most currently used catalog, so it is not allowing me to open or start a new catalog either. HELP!!!

    Search the forum, this has been answered many times.

  • "Lightroom encountered and error when reading from its preview cache and needs to quit"

    I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains.
    Any Ideas here? Is there another app that may be telling it where to look for the cache and it no longer there? I was using a ramdisk for a bit but ditched it. Not sure if that has something to do with it but it seems suspect.
    Your thoughts?
    --Kenny Brandon Wilson

    Talked to Adobe support this morning, this is their response in case anyone else is looking for help. I'm running a Windows 7 box, LR 5.6.
      Gokul: Click on start and type %appdata%, then open roaming folder.
      Edward: ok
      Gokul: Open Adobe folder.
      Gokul: Open Lightroom folder.
      Gokul: Open Lightroom folder> Preferences.
      Edward: ok
      Gokul: Rename Lightroom 5 Preferences.agprefs file as Lightroom 5 Preferences.agprefsOLD.
      Edward: OK
      Gokul: Please check if you can launch Lightroom without any error.
      Edward: it shows me a welcome screen and is asking me to select my country
      Edward: aka, register the software
      Gokul: You can skip and launch it.
      Edward: LR catalog not found
      Gokul: Please select the catalog.
      Edward: my original catalog?
      Gokul: Yes.
      Edward: testing integrity of catalog
      Edward: loaded just fine
      Gokul: Okay.
      Gokul: Please check if you can re-launch it again.
      Edward: yes, it worked!
      Gokul: Excellent!
      Gokul: Since your preferences were corrupted you were facing issue so we renamed the preferences file to reset it.
      Edward: aha....ok
    All of my import/export presets were intact along with develop user presets. I'm happy as a clam for my $10/month!

  • I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

    I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

    Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

  • I want to remove the header and footer when printing from my mac, i can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?

    I want to remove the header and footer when printing from my mac, I can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?
    == This happened ==
    Every time Firefox opened

    Go to the "File" menu, then "Print." The window that appears will have three drop-down menus at the top.
    The first is labeled "Printer",
    The second is "Presets".
    The third is unlabeled but has "Copies & Pages" selected by default.
    Click on that third menu and select "Firefox" near the bottom of the list.

  • What should I do to setup a new MacBook pro for first time when moving from a PC?

    What should I do to setup a new MacBook pro for first time when moving from a PC?

    you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
    http://support.apple.com/kb/HT4796

  • Uploading newer ios on Ipad 2 - things were going well then got a picture of the apple logo and a line moving from start to end - stopped short of end and can't do anything now - HELP

    Uploading newer ios on Ipad 2 - things were going well then got a picture of the apple logo and a line moving from start to end - stopped short of end and can't do anything now - HELP

    Try a soft-reset and see if that gets it to boot up properly : press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should reappear and it will hopefully boot up.
    If it doesn't then try recovery mode and restore/resync your content : If you can't update or restore your iPhone, iPad, or iPod touch

  • Can you keep your playlist when moving from computer running xp to computer running vista.          v

    can you keep your playlist when moving from computer running xp to computer running vista as i keep losing my playlists when using computer with vista running on it.ipod touch 3rd gen set up originally on computer running xp.thanks.

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • When moving from a list of threads view to a thread would be nice to jump to last thread read.

    When moving from a list of threads being viewed to a thread, it would be nice to jump to last thread read or first unread thread.
    Sometimes the threads get rather long.  Sometimes I haven't read a thread in awhile & I forget where I have left off reading a thread. It would be nice to have an icon to click on to move to your last read post or the first non-read post. 
    Seems this could be implemented in javascript without too much problem.  Might be a problem of when to get rid of the tracking data.
    Robert

    This would be a new capability.   I didn't know you could jump directly to the last post in a thread by clicking on the posters name in your discussions.  However, I am interested in jumping to the first post that I haven't read.
    Since writing my original post, I realize that software doesn't know what posts I have read. Lets say there are are 26 posts in a thread.  Lets assume these are divided into three pages with at most 10 items in a page:
    page 1 -- a, b, c, d, e, f, g, h, i, j
    page 2 -- k, l, m, n, o, p, q, r, s, t
    page 3 -- u, v, w, x, y, z
    The software know that I have viewed the first three pages.  It doesn't know what post on the pages I have read.  The software would need to assume I have read all the available posts on a page.
    Now lets assume that 12 more post were added.  This results in:
    page 1 -- a, b, c, d, e, f, g, h, i, j
    page 2 -- k, l, m, n, o, p, q, r, s, t
    page 3 -- u, v, w, x, y, z, aa,bb,cc,dd
    page 4 -- ee,ff,gg,hh,ii,jj,kk,ll
    It would be nice if I could go to aa. 
    Jumping to the last post in the thread doesn't hack it. You have to spend a lot of time finding where you left off your reading.
    Intesting, the list of your posts on your homepage usings the term Last Activity were as Your Discussions uses the term Last Post. The terminalogy should be the same & should act the same.  For the existing capability of going the the last post, I was thinking of Goto Last Post.

Maybe you are looking for