Shaky play back after export

The play back in imovie was fine. I then exported and the play back became very shaky. Even now after ecporting, the play back with in imovie is shaky as well. Any suggestions?

Hi(Bonjour)!
Did you render your final sequence before monitoring?
JES deinterlacer can does a great job with movie speed, and many other things.
Look at:
http://www.xs4all.nl/~jeschot/home.html
See the demo movie at:
http://www.xs4all.nl/%7Ejeschot/slomotests-JES-DEinterlacer-vs-imovie.mp4
You have to export your clip before using JES as an external application.
Set your speed, export from JES and import in FCE browser.

Similar Messages

Video clips won't play back after capture

I am a long-time user of Premiere Elements, currently using version 9.0. I am capturing video clips from the same videocamera that I've used in previous versions of PE. My video clips won't play back after I capture them. The clip is in my "media" area, but when I try to play it back, the audio plays but the picture remains frozen on the starting image. What is happening?

It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

Videos not playing back after importing

Hello everyone,
I'm trying hard to migrate my photo collection from iPhoto (and eventually Aperture, which I still use for professional work) to the new Photos app.
What I have noticed, though, is that, besides all photos from iPhone being imported rotated 180°, which is (annoyingly) fixable by hand, Photos will just delete videos from its catalogue. Needless to say, they open fine in iPhoto.
Basically:
On first launch (or consequent start-ups of the app when deleting the Photos library), Photos asks to import a library.
It goes through the import process.
All files are imported correctly (besides the 180° issue), including videos, which play back normally.
Under Preferences, I set the library as System library (in case I deleted the previous Photos library), and turn on the iCloud Photo Library feature.
Somewhere along the process, when I try to access some videos, it says "Photos can't reproduce the file" (translation from my OS X language). In some other videos, a small progress wheel appears on the bottom right, and gets stuck at about one quarter.
I have also tried to import everything by opening manually the "Masters" folder in the old iPhoto library, but then, Photos will give an error regarding duplicate files.
Honestly, all these problems are so un-Apple-like. I'm very frustrated; I've tried to give Photos a chance, but I can't even START using it.
Any suggestions?

I have this same problem, and I did a clean installation.
Hardware:
2009 MacBoook Pro 17" 3.06 C2D; 4 GB RAM, 256 Apple SSD
While loading the browser is quick starting up, I notice a delay to open any website, like it's preloading the entire page versus just loading. Safari seems like it's a bit sluggish overall with loading web pages.
Did a internet speed test and my U/D rates are the same after the upgrade.

Slow motion not playing back after 8.02

I have iPhone 6 plus. I shot a couple of slow-motion videos when device had iOS 8.0. I just noticed that these videos are not playing back in slow-mo after the upgrade to iOS 8.02. Anybody else having this problem? Any suggestions?

i noticed this too. Definitely something happened during an update. Whether it be 8.02 or IG update or something.
Before if I wanted to upload a vid on instagram with slow mo, I did where I want the slow mo part in default photos app, then it would apply in IG automatically, now IG or any app just plays the vid at regular speeds.
what gives apple?

Not able to play back after recording in Openscript

I am recording a web application, when I am playing back the same script it gives a error.
I am recording the script in Open script. The error I am getting is as follows:
Summary:
"Failed to create variable LINK_14_17, path=.//A[text()='XXXXXXX']/@href "
Error Details:
oracle.oats.scripting.modules.basic.api.exceptions.ScriptException: Failed to create variable LINK_14_17, path=.//A[text()='ADAT Complex MRO Super User']/@href
     at oracle.oats.scripting.modules.basic.api.exceptions.ScriptException.createFailedToCreateVariable(ScriptException.java:52)
     at oracle.oats.scripting.modules.http.api.HTTPService.solveXpath(HTTPService.java:386)
     at script.run(script.java:34)
     at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:225)
     at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:595)
     at java.lang.Thread.run(Thread.java:619)

Hi
Have a look at http://blogs.oracle.com/aamat/ to get an understanding of correlation in OpenScript as this is a basic correlation error.
Regards
Alex

Canon HG20 video wont play back after capture

Hi All,
I have a strange issue that I am hoping that someone here has encountered has an idea of what to do.
Last summer I shot some video of an important person involved in stopping child trafficking in Nepal who was visiting the US on speaking tour. The video was shot on the Canon HG20 in 24p.
I have been having many issues with my edit machine and finally having replaced it I have gotten around to capturing everything from that camera in the urgent need to erase the drive and for another shoot.
I took the footage in using log and transfer with Apple Pro Res HQ as my setting and all seemed well. I have done this before and never had an issue. During the transfer the clips played back perfectly and looked really beautiful; a great interview. I started a back up of the media, then (stupidly) erased the media off of the camera and went on my merry way.
When I came back I saw that Chronosync did not complete the back up because of errors. The video would only show a freeze frame and play some audio in Quicktime before Quicktime would crash and give error messages. In FinalCut Pro it alternated mostly green, a little suppressed audio from the interview interspersed with clicking, whining and popping sounds. Then Final cut would crash with errors.
I tried importing the video to a new project. It imported but had the same result. I tried to copy the files to a new drive, in case the drive was at fault and it would not copy citing errors.
In Final Cut I may have located the problem, I transferred the material from the camera at 29.97 instead of 24p.
Does anyone have any idea how I can save my footage? It would be worth it.

It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

My Microphone Levels are Low when I play back after recording

I plugged my Microphone into the computer and opened up Garage Band and saw that My Microphone was working. I hit record and started speaking into the Microphone to record my voice. I hit record:
1) The VU meter on the bottom right started to peak and I heard "Pops" as I was recording. When I pressed stop, and played the recording back, the levels were really low.
How can I get the recording to be a bit higher? I am using it for a Voice Over. What am I not doing correctly?
Thanks in advance for your help

I am monitoring through my KRK 8's. I have changed nothing other than the update . I used to be able to hear all of the amps/effects real time , but now it is only after the recording is done and I play it back that I can I hear the amp/effects that I selected for the recording .

Getting message about having LR5 already open SO I need to know how to get my pictures back-after export.

Hi,
I have been working on photo's and doing the export the laptop freezes up on me, so I have to shut down everything and re-open. When I go to open LR5 back up I get an error message saying that there is LR already open and that I have to open a new folder - Since I have editing all (about 900 pictures) - is there a way of getting those back Instead of having to RE-DO all of them. Which is what I am **** right now and it is VERY hard for me.
I would Love to get a answer on how I can get the photo's back instead of having to re-do all of them again. THIS has happening a few times to me now and I don't like it.
I hope that this makes sense - I would just love an answer..

okay Error message is as follows - pop up window has confirm on the top of
it. The lightroom catalog named "Lightroom 6 Catalog" cannot be opened
because another applications already has it opened. Button Choose a
different catalog, Continue or exit. I have hit all the buttons before and
the ONLY thing that works is to Choose a different catalog and open a new
one?
Might I be able to get my originals photo's back?? the ones that I have
edited already???

Quicktime movie only has the first song in the play list. after export

when I export an album to quicktime the quicktime movie only has the first song in the play list. The slide show works in i photo with all songs in the playlist but the quicktime only takes the first song and repeats it over and over

I used the garage band method to string the songs together. Then used the mega song to play with my album. and it even exported to the quicktime movie. Thanks for the post.

After Mountain Lion install, internet videos stop playing back after only a few seconds. Multiple browsers are affected.

After I installed Mountain Lion, videos streamed from the internet will stop playback after a few seconds of play. Multiple browsers are being affected.

I have this same problem, and I did a clean installation.
Hardware:
2009 MacBoook Pro 17" 3.06 C2D; 4 GB RAM, 256 Apple SSD
While loading the browser is quick starting up, I notice a delay to open any website, like it's preloading the entire page versus just loading. Safari seems like it's a bit sluggish overall with loading web pages.
Did a internet speed test and my U/D rates are the same after the upgrade.

"Generate in DDL" checked back after Export DDL

I have a table COUNTRY in a relational model with "Generate in DDL" flag unset. When I export the model with "File > Export > DDL File" the flag is set back and table is exported.
1) Is there a way to "convince" Data Modeler to leave the "Generate in DDL" flag unset and do not export the table?
2) Is this a bug?
There is a Foreign Key to table COUNTRY with the "Generate in DDL" flag set, but I would say this should not change the flag.

I found the problem. When I do "File > Export > DDL File" , then Generate a small window shows with ticks for:
- Whole model
- - Assigned to Schemas
- - Not Assigned to Schemas
- - Schemas
- - Structured Types
- - Collection Types
All are selected and I only need to export objects "Not Assigned to Schemas". If I untick the "Whole Model" then I tick only "Not Assigned to Schemas" it will set all the tables/objects from the model, without using the "Generate in DDL" flag. More than this, it will set back the "Generate in DDL" flag for all objects in the model. Imagine that I have 100 objects into the model, how is to need to tick back the "Generate in DDL" flag for 30 objects of 100 all the time. This is an annoying bug if you agree.

Audio won't play back after recording.

After recording with my BEHRINGER 1204FX though USB, I can see the audio in its track but it won't play the audio until I unplug my 1204 FX and set my input as built in or something else.
Why can't I listen to my recordings whithout doing this?

You need to create an aggregate device.
This link should help:
http://discussions.apple.com/thread.jspa?messageID=8813763&#8813763

Nothing plays back after I record

After I record some vocals on Logic Express 8.0.2, it won't let me go back and listen to them unless I go to Preferences and change something within it (buffer, device, etc.). And once I click apply changes it'll let me listen to it. But once I record again it happens all over again. It's pretty annoying and it takes up too much time. So I was wondering if anyone could help me out.
Thanks.
P.S. Is it possible to delete your Logic Express and then upload the same disc to your Mac again?

Now your answer clears it: Logic Express 8 doesn't have the feature of selecting different input/output devices. So, whenever your USB mic is selected as input device, Logic thinks "this is my input/output device". But well, a mic is no output device
You can solve this problem by creating an aggregate device within the audio-midi-setup utility in the applications/utilities folder (or simply spotlight for "audio midi") and it should find it.
Open the audio window, click on the plus sign to create a new device. Within this new device you can include your USB mic as input and your mac's built in output into one main (or "aggregate") device.
Hint: You'll need admin rights to set it up!
Then, you must select this newly created aggregate device as logic's input/output device. Be careful to select the correct inputs and outputs if you included all you mac's inputs into the device, too.
Fox

Video play back after importing is black and white or has a purple hue....FCP 10

after i import my audio into fcp 10, it shows up in playback window in the upper right corner either in Black and white or with a purple hue to the video. the original video isn't like this at all and the thumbnails after importing dont look like it also. what is wrong????

The FCP-X forum is located here:
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x?view=discussions
This forum is for FCP through version 7.
-DH

Apple TV Sound Drop after 20 Mins of Play. Also on iPad Movie play Back.

Over the last week my Apple TV and iPad Mini have started to drop the sound on play back, after 20 mins.
The stream via itunes on the Apple TV is stored on my Synology DS213j going to 2 ATVs one hard wired the other wireless.
Itunes, Synology, Imac and ATVs all up to date with latest software and firmware.
I have reset every thing rebooted and still the problem is there.
Also done the sign in out of everything fingers crossed thing.
The strange thing is I noticed when I watched a movie saved to my ipad the same thing is happening!
This happened on a plane away from home set up.
This must be a software issue in the ITunes family.
Is any one else having this issue and have you found a fix, or do we need to wait for an Apple acceptance of the issue and a fix?

Are you in the top level of the menu (not in the one where you select movies to preview).
It may not have rented.

Shaky play back after export

Similar Messages

Maybe you are looking for