Shall i put a 7200rpm hard drive into my black macbook for logic pro?

hi, i bought high spec black macbook refurbished which came with a 5400rpm drive inside it.
Im using logic pro, and its been running fine with small projects, but when i have a medium sized project using several vst instruments and exs24s using many audio samples, all of which are running off the internal.... i get error messages, system overload messages...and i am unable to bounce to audio file (in logic pro)
im thinking its the slow hard drive which is causing the main problems.
I have 2gb ram. It also takes sometimes over 5 mins to open this logic file. And then some!
Or is this poor performance par for the course, if using just ONE internal drive, for both system files and audio storage....... ?
Are there possible probs which may arise from taking out the 5400 drive and fitting a faster 7200 drive in to my macbook? I hear it will heat up more....so could this mess with other macbook componets?? the excess heat...... or are macbooks bulit to handle 7200rpm drives too??? dont remember is 7200 was an optional upgrade with my model or not......
2.4ghz intelcore2duo.
Anybody fitted a 7200 drive into their macbooks???? all running ok??
Would i simply put the new hard drive in..... and then boot up from boot dvds and my time machine backup....to have a full up to date system, all apps and file intact as they are now???? Im worried it will get messy and problems...... my current drive is packed to rafters with apps and files and work i have done......i dont want to lose a thing.....would it be a simple easy fool proof transition to faster hard drive????
And could i still use the current hard drive? With an enclosure??
Ive heard people have ripped out the opticla dvd drive and fitted ANOTHER hard drive into their macbooks, so the laptop housing two hard drives..... that sounds good...but crazy..... maybe later ill do that....as i hardly use the cd/dvd drive...... and you can always hook it up with wire if need be......
any tips or advice....would be most kind and helpful.
thankyou.

I used Carbon Copy Cloner- do not use Time Machine for this- to make a bootable clone of the drive inside my Macbook Pro, and then installed the new, faster drive. I then booted from the cloned drive, and cloned that back into the fresh internal drive. That being said:
1) I only did this since I bought the laptop used, and didn't get the install OS discs. I would have started fresh and installed everything myself, but then again, it wasn't my laptop, and I didn't care about what was on it. You might.
2) You need to clone to an external Firewire drive if you want to make a bootable clone. Do not use USB. Do not use Time Machine, as its backups are not able to be booted from.
3) The whole replace the internal DVD drive with another sounds pretty iffy to me. Just use the Firewire drive you'll now be having at you disposal for a variety of things, including possibly recording to. I can advise once I know what your interface is, if any, and if you've got a Macbook or a Macbook Pro- I forgot to look.
You will get much better results with a 7200 RPM drive, by the way. You can certainly use the old drive in some sort of enclosure, although it's still a slow drive and all, so I wouldn't really invest much into it. Maybe put it in a USB enclosure and use it for backups, or for transporting material, or for cracking walnuts, maybe, if you have a walnut tree.
Even in this fancy computer age, there is still nothing better than a freshly roasted walnut or pecan. Good luck, L

Similar Messages

Apple put a new hard drive into my MacBook Pro and updated the system to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. Why and what am I supposed to do?

Apple put a new hard drive into my MacBook Pro and updated it from Lion to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. They also didn't put Pages, Keynote or Numbers back on it until I argued with them. Of course, I didn't have my data backed up. My hard drive was destroyed when I tried to install the update of Mavericks myself. I should not have to buy iWeb and iPhoto when I already had them. Suggestions?

cwhargrave,
have you tried looking in the App Store, to see if you can redownload iWeb and iPhoto there gratis?
If you haven’t done so already, you should purchase an external hard drive to act as a Time Machine backup destination, so that you’ll have an option to rollback to a working environment if a new OS installation is troublesome.

Can you fit in a 7200rpm hard drive into a macbook?

mac book pro is expensive.
my main concern about the black macbook is that the hard drive is less than 7200rpm. music software pro tools says to use 7200rpm drives.
so is there a way to put one in? it doesnt seem to be an option to upgrade on mac shop.
pro is expensive!
thanks

Aaron Michalczuk wrote:
Personally, I would recommend you try newegg.com they usually have very good deals. All you need to look for is a 2.5 inch hard drive (usually called a notebook drive or laptop drive). It also should be SATA. Other than that you can just look for whatever specs you would like. I would recommend Western Digital, Seagate, or Samsung as excellent brands. However, for the most part it wont matter too much. I recommend newegg, because it is the largest online computer retailer in the world (i think) and all of their products have good reviews so you can read up on how the hard drives have worked for other people. The hard drive that came stock in my macbook is a Fujitsu which is just another manufacturer. I would base your decision off of the specs and the ratings, not the manufacturer. Just remember 2.5" SATA
I bought from my 200 GB Travelstar 7K200 from Newegg myself. That being said, I doubt Newegg is the largest online computer retailer in the world; they've got an annual revenue rate of just under $2 billion. I'd think Dell would be bigger, although their $68 billion per year may include store sales now that they have boxed computers sold at other retailers. CDW is also bigger.
You forgot the most important spec. The drive height can't be more than 9.5 mm. There are a few oversized drives that are thicker and won't slide into a MacBook.
Best Buy (if you're in the US) has a 200 GB Hitachi Travelstar 7K200 kit complete with USB enclosure for $159.99. It comes in a full retail package, while most of the drives at Newegg come as bare drives in an antistatic bag. I actually paid more just for my drive from Newegg earlier this year, although the price has gone down.
http://www.bestbuy.com/site/olspage.jsp?skuId=8682222&type=product&id=1197679249 375

How do I install Windows Vista in my R500 that I just put a new hard drive into?

I was given an R500 that had the hard drive removed by the previous owner for security reasons. I bought a charger and a new hard drive and intended to install Windows Vista that I bought a while ago and never used. I charged up the battery. The battery is good. I installed the hard drive. I'm pretty sure I got that right. Then I turned on the laptop. I expected to see a menu giving me some hint as to what to do next but all I see is ThinkPad in big white letters and underneath "To interrupt normal startup, press the blue ThinkVantage button." I stared at the screen for a while and then pushed the blue ThinkVantage button. Nothing happened. I opened the disc drive and put in the installation disk thinking that should bring up a menu. It didn't. Nothing happened.
I'm reasonably experienced with computers and have installed hardware and operating systems before but this has my stymied.
Anybody have any idea about how this is supposed to work?

Actually, I tried that and nothing worked. Couldn't get past the opening screen. Fortunately, I have several other Thinkpads of various models that I got for a few bucks each (without hard drives) from a business that was replacing all their laptops. I pulled the hard drive out and put it in another R500 and, after a few fits and starts, got Vista up and running and then found out that the touchpad was flakey and the mouse pointer would freeze. All the USB ports were broken so I couldn't use my wireless mouse. Out came the hard drive and my next try was in an R61. Funny thing. Vista opened right up but there's no touchpad on the R61. (You can tell I'm new to Thinkpads.) Took me a few minutes of scratching my head and googling to figure out that the red button moves the mouse pointer on the screen. Now I have one good one so far and I'll see how many of the others I can make work.
Thanks for your help.

Has anyone had issues with putting a 1TB hard drive into an early 2008 20 inch iMac?

I have been trying to upgrade my 250GB hard to a 1TB Western Digital Blue hard drive. So far I have tried the following...
* CCC clone
* Super Duper clone
* Disk Utility clone
* Fresh install of Mavericks and Migration Assistant
Each time I do these I am able to boot to the new hard drive externally through holding down the Option key and choosing the new drive. However, when I install the new drive internally all I ever get is a blinking folder with a question mark upon startup. I cannot get the new drive to boot when it's installed in the machine. And, I can't get to Disk Utility when the new drive is installed either. Once the new drive is installed internally I lose the ability to do anything with the compuetr. I have tried several different key combinations, but all I ever get is the blinking question mark folder. The only time I can boot to my new disk is if the old drive is installed internally and the new drive is external.
Any thoughts?
Thanks.

Thanks for your replies!
Right after I wrote, the dvd player started working again. With the old HD in, I booted from the disk and went into disk utility to see if I could repair the old HD. It could not see the old drive.
So I decided to get brave and try the new HD (sorry I did not see your feedback on the green drives, first). I got WD because that's what was in there and I had good luck with WD's in the past. Of course, as soon as I fired up, it spit the dvd out. I tried 4 times and on the last try it read the DVD.
The I used the procedure I saw on GIZMODO (http://gizmodo.com/333319/the-secret-of-the-time-machine+assisted-hard-drive-swa p) to partition the drive correctly and start the resore. I guess I'll know in 4 hours whether or not I succeeded.
If the green drive works for the time machine swap, should I be good to go? I went for the green because it was cooler running and the back of the computer always got extremely hot right before it acted up. Of course, I did a thorough cleaning as part of the repair.
Gary

I have recently put in another hard drive into my system to hold my iTunes any tips on how to transfer the system easier?

What is the easiest way tostill have my iStore and iTunes accounts and switch from my C: drive to my E: drive which is my new hard drive?

I have tried contacting Apple Support and they aren't supposed to give out info for XP. My warranty is with Best Buy and they said that they would reinstall iTunes into my E: drive for only $149.00.It cost me $200.00 to have the second hard drive installed by the people that made my computer. I just wanted more space to start my art business which will require the first hard drive's space. Plus when I'm working or playing on my computer I HAVE, NEED, itis REQUIRED that my music be playing. Needless to say right now I'm going nuts

I hooked an external hard drive into the '09 macbook, but when it's in the usb, it has a pop up that says the disk cannot be read, then brings me to disk utility. I have no idea why it wont read the external drive, as it has worked properly before.

I have an external drive with old music files (about 127GB worth) and I was hoping to put them onto my laptop. I hook it into the USB port, and it pops up an error message saying the Disk cannot be read. This is strange, because the drive was hooked up before and worked perfectly fine. It sends me to Disk Utility and says that It must be repaired, but when I click repair, it wants me to back up anything I can (which I cannot at all, none of the files are on right now) and erase it and repair. I have no idead why it's doing this, any help?

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

Beachball and hanging after putting old hard drive into new MacBook Pro

Hi there,
I really hope to find some help here.
The situation:
I had a MacBook Pro Early 2008 running Lion (10.7.5) until it died about a week ago (mainboard broken).
In this old Macbook Pro I had two hard drives: 128GB SSD and 1TB SATA 5400.
I bought a second hand MacBook Pro Late 2011 on ebay and upgraded the Ram to 16 GB.
Then I put the two hard drives in the new MacBook Pro Late 2011.
The Macbook is super fast and very responsive but every couple of minutes it is hanging for a few seconds or I get a beachball randomly.
This can happen in Finder, Google Chrome, Adobe Dreamweaver, basically anytime using any software.
I tried to create a new account and see if the problem persists. And yes, it does.
I tested the hard drives (disk utility) and the Ram (memtest/terminal) and all is ok with this.
The Macbook Pro Late 2011 comes with a 256 GB SSD and an empty slot for the second hard drive. The Macbook seems to function normal when using the 256GB SSD with Lion installed.
Unfortunately my external backup hard drive is not working anymore so I can't restore from there.
What do you recommend? Would it make sense to make a backup now, take out the 128GB and put in the 256 GB hard drive?
Please advice!
Thanks for any kind of help in advance!
Chris

I know people that have been doing things for longer than 10 years and they know jack. Formatting the HD is not really good "advice" in this situation.
I'm not cocksure - you just think I am because I'm disagreeing with you opinion, which you believe to be sacred (because you've been commenting for 10 years?).
So I thank you sir for your opinion but I certainly do not need your luck.
Later.

MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
Both hard drives have OS X 10.9.4 installed
If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

So after switching the internal SATA cables from each computer, now we have
His computer, with my SATA cable:
1) Worked with every hard drive!
My computer, with his SATA cable:
1) Works with 1 TB Toshiba hard drive
2) Works with 500 GB Seagate hard drive
3) Works with my original hard drive
4) Flashing folder with question mark with his old hard drive
So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

HT204370 I have changed my internal hard drive on my macbook pro. I have put old hard drive into a capsule and have this plugged into my laptop. I can't find the movies on my old hard drive now? Any idea how I can move them to iTunes again? cloud taking H

I have just changed my internal Hard drive on my MacBook pro. I had recently downloaded some movies on iTunes which I want to put into my iTunes library on my new internal hard drive. I have put my old internal hard drive into an external capsule but when I open the icon of the hard drive from the desktop I can't find my movies.
At the moment I have the new movies downloading again from the cloud but it is literally taking hours for even one movie to load.
When I changed the internal hard drive I restored my info from my old external hard drive which hadn't been backed up in a month and hence does not have my latest movies...
I am concerned that I might go over my internet usage limit (flatmate is refusing to change to unlimited package!!!!) by downloading all the movies again from the cloud never mind how long it is taking...
Is there any way to restore all my info and media from the old internal Hard drive in the capsule as well as from the external hard drive?

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331

My laptop blew up. I put the hard drive into a case and I can access it as a drive. How do I transfer the bookmarks from the Firefox on the old drive to the Firefox on the new drive.

My laptop blew up. The hard drive was still good so I put the hard drive into a case and I can access it as a drive via USB. How do I import the bookmarks from the old drive to the new drive?

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Just had to put a new hard drive in my Macbook. How do I "backload" my Ipod tunes into Itunes on the new hard drive I had installed?

I just had to put a new hard drive in my Macbook. How do I "backload" my Ipod tunes back into Itunes on the new hard drive I had installed?

Somebody told me that as soon as I connect the Ipod to the computer, Itunes will will wipe it clean and install what is in the Itunes library (which is nothing) and that I would need some sort of software to accomplish this. Does it matter that the tunes on the Ipod were all uploaded from cd's and not purchased?

My motherboard died on hp laptop. i put my hard drive into an enclosure to access data. is it possible/how do i transfer my bookmarks from hard drive to my new computer which is a macbook pro?

hello. my name is brandon. my hp laptop motherboard died 3 days ago. i have put my hard drive into an enclosure to be able to access all my info and files. i have successfully transferred all my files, but I am not sure if, or how i can access all my mozilla bookmarks from my my old hard drive to be able to put onto my new laptop, which is an macbook pro. my bookmarks were crucial to pay bills etc, so any help would be greatly appreciated, brandon

Not familiar with the Mac file structure either but you can transfer the entire content of your Firefox profile replacing entire content of a firefox profile you created on new HD. For me copying over a few files was out of the question all of the files are updated and I wasn't about to reinstall 150+ extensions and set up configurations for everything and to do that for that 20 profiles and .ini file. Except for 3 most didn't have a lot of extensions but it would be rather impossible.
I copied everything from the Mozilla folder down in the user libraries so all my profiles were set, it did something similar for application libraries.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Shall i put a 7200rpm hard drive into my black macbook for logic pro?

Similar Messages

Maybe you are looking for