Shall i restrict CS01, CS02 by Material type wise
Dear all Gurus,
Please help me out to restrict the CS01 & CS02 by material type wise.
Thanks in Advance
pabale
Dear Mr. Devendra,
Please let me know the configuration in details becoz i want to restrict the user for not to change the HALB TYPE BOM in CS02 but in case of FERT type he can change.
e.g.
BOM Creation user has to rights to create / change the BOM of material type FERT.
BOM Creation user has to rights to create / but no change authority the BOM of material type HALB.Change rights we have to assign to authority.
Hope from you positive feed back and thanks for immediate respond to both.
Regards,
Pabale
Similar Messages
-
Purchase report on Material Type wise
Dear All,
Is there any tcode avl to take the report of Purchase orders material type wise.
RegardsHi,
You can get the report as you required by standard tcode ME2n, ME2M run any of tcode then press Shift+F4 than choose purchase document item > there you will see material type > click on that it will move to ME2N screen . Now enter select material type and provide further data as per your requirement and execute. -
Mandatory in material master with material type wise
Dear all
Is it possible to make a field mandatory in material master with material type wise?
kindly helpHi
See the below config
Check in OMS2 for your material type for "field reference". then
Spro>logistics general>Material master-->field selection.
Here you need to group required fields under one field selection group. then in Maintain field slection for data screen, you can make Field group madatory for the field reference (material type)
If required take help from MM consultant
Regards
Antony -
Material type wise Po ,gr value
Hi
Are there any standard reports available for Material type wise PO value ,gr value and invoice amount???Hi ,
Then try to get data like this
tables ->MARA->EKPO+EKKO-->EKBE.
regards
Prabhu -
Material type wise closing balance
hi experts,
can u help me out to get the material type wise closing balance of all plants, we can get this using mbew but it will be a performnace problem ,hence can u help me out to find a function module or bapi which does this, or tell me a way to acieve thisFilter the material from mara table (mara-MTART).
and obtain the data from mard table for those material in mara table and plant
you can also use the standard txn: MB52
Thanks
Ganesh -
Shall v maintain price control for material type with plant specific ?
Hai Guru,
In OMS2, we change HALB price control [valuation] as V or S. whether shall v maintain this for plant specific.?
Kindly guide
With Regards
SwethaHi
if you do not make the indicator Price control manadatory active then you can have different price indicator for each plant. However thsi indicator is never done plant specific. If you wish to have plant specific then you may have to have a new material type and again you need to control the MM01 creation for that particular plant by means of Authorisation control which is littel involved also but can be done.
Regards -
Restricting PM user by material type
Hi everyone,
I want to restrict access to PM users and limit to only allow them maintenance to material type - assemblies (IBAU - Maintenance Assembly). We are using a customized material type (ZBAU - same name used for Auth group) which references the standard IBAU material type.
I have created an authorisation group for this and it is maintained in T134. Authorisations in both objects M_MATE_WGR & M_MATE_MAR are restricted to ZBAU (which is my Auth group) in the authorisation group field (BEGRU), and the other objects which bring in the Auth group field are also restricted to ZBAU. However when I test this my test user can still maintain other material besides ZBAU.
Please advise.
Thanks a lot.Hi,
There could be two reasons for that
1) if the access is coming from some other role in the user master.
2) The Authorization group field doent retrict access to material which are not attached to any specific authorization grp.
as per you note u attached ZBAU to grp ZBAU but make sure the other material tpye which you want the users to not have access to be added to a differenet authorization group. if they are not a part of any auth group they will be able to acess all those material types..
Hope this helps
Manohar -
Material type Wise Opening /Closing
How Can I get a report of Material Type Opening/Closing Balance?
Hi Biswajit
R u not getting the desired result using MC.9.
and as for MB5B only option i can see is first we get a list of material for a material type from MARA, then select those material and enter into MB5B report.
regards
Yogesh -
Ffield mandatory material type wise
Dear all
Is it possible to make a field mandatory material tyes wise in material master?
kindly helpDear,
Yes you can do it through OMSR OMS9 select your field you want to make mandatory then in Field reference for material master here according to your material type you can do it.
Regards,
R.Brahmankar -
Material type wise batch numbers
Hi,
I want to have different batch numbers ranges for different material type
Eg batch nos for Raw material should start with 10000000000
Batch nos for semi finish - 2000000000
batch nos of finish - 3000000000
Can anyone help me in this regards
Thanks in Advance
AbhiYou can use some of the standard User Exits or develop a custom user exit for this purpose.
You can use SAP enhancement SAPLV01Z for internal batch number
assignment. This enhancement contains two function module exits that you
can use to define number ranges or templates for batch numbers:
EXIT_SAPLV01Z_001. You use this exit to replace the number range
object and/or interval proposed by the system with your own number
range object and/or interval.
In addition, you can, for instance, stop the system from assigning
an internal number depending on the material or plant. You can also
use this exit to stop the dialog box from appearing.
EXIT_SAPLV01Z_002. Using this exit, you can either change the number
assigned by the system, or assign your own number.
There are many such user exits, please check and use the appropriate user exit.
Hope this helps you. -
How to restrict material master by material type t-code MM01
Hi,
how to restrict Materilal master by Material type in t-code MM01
I do restrict by M_MATE_MAR authorization object . After i see there not restrict.
Amit>
sapvinithbasis wrote:
> hi
> plz help me out in solving this issue
> regards vinith
Vinith,
I have explained in great detail exactly what you need to do at every stage. The steps I have outlined are the same that I follow every time that I want to apply material type restrictions.
I strongly recommend that you contact your security admin to help with this, alternatively engage the services of a trained/experienced security admin who can come on site and go through this with you.
If you have done the following then it will work:
1. Assign auth group to material type via OMS2
2. Verified that check for M_MATE_MAR is active
3. Ensured that M_MATE_MAR does not contain the auth group/s which you assigned via OMS2 (that includes *)
This is the last comment I will make on this topic.
Cheers
Alex -
ME21N restriction by material types
Hi
We would like to restrict ME21N access by material type. I believe this is possible by turning on the authorisation check in SU24 for ME21N transaction for authorisation object M_MATE_MAR and once the relevant material types are maintained through T-code OMS2
Would these two changes suffice or do we need to activate any BADI in ME21N transaction to enable this authorisation check. I am not sure if M_MATE_MAR check is part of standard authorisation checks in ME21N. Please advise
Thanks & Regards
Dinesh NHi,
you mentioned article type but object M_MATE_WRK controls access on site level. Anyway, if ME21N performs check for this object then it will be executed. Hence I would suggest to run authorization trace to see which checks are executed. If check for your object is not there then there is standard BADI for POs that can be used to add additional authorization checks. So it will require some coding but not much. It's quite straight forward.
Cheers -
Restricting the material types in MM01
Dear experts,
Our client is using few materila types like-HIBE,NLAG,ROH
We have upgraded from 4.6B to ECC6. Now many other material types have come .
While creating material in MM01,selecting the required material type among the many is inconvient.
1)One way of removing the unnecessary mat types is deleting others in OMS2,
The other way of restricting is --
2) I can enter the authorisation group in OMS2 for the required material types and i can assign to M_MATE_MAR object in the required role, but it is not working
Do i need to create authorisation group in any customisation for entering in the OMS2, because what i entered in OMS2 is not displaying in PFCG of the authorisation object under authorisation group.I have checked in SM30 also ,the same authorisation groups under T134 table are updated. Even though,mat types are not restricted in MM01 under material type field.
Please suggest any other way of restricting the display of material types in Material type field of MM01 instead of deleting unwanted the material types in OMS2 transaction
Regards,
DayanandYou can use the material type specific transactionsminstead of MM01, remove the authorizations of MM01 transaction and add the required material type creation transactions
example - Goor Matreials create(special)
HIBE,NLAG,ROH
MMB1 Create Semifinished Product(HALB)
MMF1 Create Finished Product(FERT)
MMG1 Create Returnable Packaging
MMH1 Create Trading Goods
MMI1 Create Operating Supplies(HIBE)
MMK1 Create Configurable Material(KMAT)
MML1 Create Empties
MMN1 Create Non-Stock Material
MMP1 Create Maintenance Assembly
MMR1 Create Raw Material(ROH)
MMS1 Create Service
MMU1 Create Non-Valuated Material
MMV1 Create Packaging
MMVH Create Centrally: Decentral.Shipping
MMW1 Create Competitor Product -
SLED restriction to certain material types
Hello,
is it possilbe to restrict SLED Check by material type? Means e.g. I only want a SLED check for ROH. not for VERP.
(I know it's possible to define it by plant and movement type.)
Thank you.
Best regards, Paul.I just tested it in my system,
In OMJ5 the SLED check for plant 0001 is set active
the check for movement type 101 is set to 1
I used a material that has no shelf life data maintained in material master, but is batch managed
I am able to do MIGO without entering a production date nor a SLED manually.
The batch is created with no data in this fields.
I do not receive any message (as expected).
Can it be that you removed the shelf life data from material master, but did not remove it from existing purchase orders? -
PR Release with Material Type Characteristics
Dear Experts,
Any of you used material type as PR release class craracteristics?
I have one query regarding this-
1. My business requires material type wise relesae strategy, means raw material and spares will have separate release strategy
2. We have included material type in Class cracteristics.
My query is if user creates a PR with out material code, that PR will not have any material type. But I want this to follow the release strategy. How to achieve this goal?
Anybody worked with this scenario?
Full points will be awarded for suitable solutions.
Regards,
SantoahHi,
Instead of material type, you can use material groups for release strategy. Even, if a user creates a requisition without material code, he will still have to enter a material group. This will serve ur purpose.
However, if there are many material groups and you prefer going with material type, then you will have to enhance the communication structure CEBAN, with Material type field, to be able to create a release characteristic for material type.
Hope this helps. Reward, if useful.
regards,
VS
Maybe you are looking for
-
Photos warping a bit after renedering
Photos appear normal in preview and then warp when placed in the movie. Anyone?
-
Starting Workflow from Generic Object Services in IQS1 Transaction
Hi All, My requirement is users will create the notification through IQS1 and they will attach the Adobe document through Generic Object service. In the notification Task, they will assign the repsonsible person for that form. Once they released the
-
Can a swf file begin executing code before loading completely?
I have a swf file with a preloader on the stage at authoring time. The preloader centers itself by retrieving the stage dimensions and calculating the coordinates it needs. This works everytime in Flash preview, but once I put it online it only works
-
Valid actions to prevent "Waiting for in-flux to clear"
Hi all, In our application we use to do heavy processing with some connections to Timesten instance (about 20). Sometimes, we got this in-flux message on syslog: <wait not in flux> Waiting for in-flux to clear (now reason 2=connect pid 14515 nwaiters
-
Third Party Sample plug is sound out of tune in Logic X
Hi there: I am using external libraries as plug ins with Logic X, and I am getting a few instruments sounding way out of tune. Initially I noticed it with the Vienna Symphonic Library, and now I am having the same problem with East/West smaples. Wha