Shall i update my N96 to V30?

Hey People
Shall i update? as all im after is the audio theme?
Help

I would always keep my phone´s FW up to date, since updates bring more benefits than new bugs (expections confirm the rule!)
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Similar Messages

  • N96 Software v30.033 Battery and Calendar Problems

    Earlier this month I upgraded the software on my Nokia N96 to v30.033. Prior to this my battery life was sufficient to get me through an entire day.
    Since I upgraded, the battery life has dropped, and now by 5pm I'm down to 4 bars. I have not increased how much I use the phone. I have also checked that all the options for wi-fi, bluetooth and other things that use a lot of power are as they were prior to the update (in case any of them had been reset). I have even gone as far as to replace the battery, thinking that it might just be my original battery wearing out, but none of these have solved the problem.
    Has anyone else encountered this and how did you solve it?
    The second problem is to do with the calendar. Prior to the update it would display the next 5-6 entires in my calendar, no matter how far in the future they were. Now it will only display 2, and only if they are happening either today or tomorrow. Does anyone know how to change it back to the way it was?
    Finally, how do you turn off the bloody annoying "swoosh" noise the phone makes now when you slide it open?

    I haven't notices a big change in power consumption, but I am a heavy user and I always have the phoen on charge whrn I'm in the car, so maybe that's why.
    The (I agree with you) annoying noise can be shut off as follows:
    Menu>Tools>Settings>General>Personalisation>Themes>Audio themes>Phone handling events and then change both opening slide and closing slide to 'silent'.

  • Shall I update my memory to 32G (4x 8G) with DDR3 1600 Hz

    If I want to update my computer hardware, shall I update memory to 32G (4x 8G) with DDR3 1600 Hz or the computer computer just only support DDR3 1333 Hz with maxium 4G RAM?

    Welcome to Apple Support Communities
    The Mid 2011 iMac needs 1333 MHz DDR3 memory, so you have to install 1333 MHz memory. 1600 MHz memory isn't supported on your computer.
    You can buy more RAM at OWC or Crucial. Apple supports 16 GB of memory officially, so it's possible that 32 GB of memory won't work even if they have been tested by other sources

  • HT1414 shall i update my software update in Any of the Apple showroom with free of cost?

    shall i update my software update in Any of the Apple showroom with free of cost?

    Most Apple Stores have free Wi-Fi so yes you can update your apps.

  • Firmware Update for N96 model type RM-247

    HI,
    I have Nokia N96 since last 1.5 years in INDIA, TYPE- "RM 247", I have updated this phone with version V30.033 version date 18-06-09.
    This update have made really good Improvements in my Phone Performance and Display but stil Speed of the Phone is not upto the satisfaction Level. The phone Hangs a lot and Get restarted for many times a day, speed is very slow and makes me disappointed.
    This is been around 1 year and few months Nokia has not launched any Firmware Update to Improve N96 performance & Speed.
    I am Expecting major Phone Perfomance Improvements.
    Any Body from Nokia Support, Please Reply
     Regards, S.K.

    satishN96 wrote:
    OK, so is it possible to Upgrade / Change the symbian OS for My N96. I want to switch to New OS which also belongs to Symbian.. Please tell me how could i upgrade my Phone ..
    Thank You
    Satish
    No
    The hardware cannot run a newer version,
    It's an old phone that is past it's time, software and the required spec has moved on

  • N96 firmware V30.033 instability

    Hi all,
    I am quite disapointed with last firmware v30.033. maturity of the firmware is back to what we had with the very first ones V10 or V11 don't remember the exact numbering. 
    today my phone reboot whe I receive an sms while listening to music, it also reboot while broswing internet. 
    I have some issues with nokia maps continously telling me while using it that another copy of nokia map is running at same time and asking me to close it!! 
    Hope developer are aware of the very low quality of this firmware and that a update is coming soon to fix this mess
    thanks

    a smart phone must work at a faster rate
    but N96?????!!!!!!!!
    my music players equaliser resetting to default from bassbooster when i mess
    messaging & contacts take lotta time to load, a business man will get angry if he uses it.
    thumbnails in photos are not proper
    If you find my posts useful please say
    thank you by clicking the Kudos! star.

  • Create a new web application, how shall I update the file server.xml

    Hi,
    I will create a new web application, i.e named newApp. Then I create a file structure as follows:
    - <server-root>/newApp
    - <server-root>/newApp/WEB-INF
    - <server-root>/newApp/WEB-INF/classes
    Then I must tell the server that I have created a new web application. Then I must update my file server.xml, How shall I do this and where in the file shall I type in the new information?
    I use windows XP Pro, and Tomcat 4.1.27.
    My server.xml file looks like below:
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN" debug="0">
    <!-- Comment these entries out to disable JMX MBeans support -->
    <!-- You may also configure custom components (e.g. Valves/Realms) by
    including your own mbean-descriptor file(s), and setting the
    "descriptors" attribute to point to a ';' seperated list of paths
    (in the ClassLoader sense) of files to add to the default list.
    e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
    -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
    debug="0"/>
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
    debug="0"/>
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved">
    </Resource>
    <ResourceParams name="UserDatabase">
    <parameter>
    <name>factory</name>
    <value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
    </parameter>
    <parameter>
    <name>pathname</name>
    <value>conf/tomcat-users.xml</value>
    </parameter>
    </ResourceParams>
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Tomcat-Standalone">
    <!-- A "Connector" represents an endpoint by which requests are received
    and responses are returned. Each Connector passes requests on to the
    associated "Container" (normally an Engine) for processing.
    By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
    You can also enable an SSL HTTP/1.1 Connector on port 8443 by
    following the instructions below and uncommenting the second Connector
    entry. SSL support requires the following steps (see the SSL Config
    HOWTO in the Tomcat 4.0 documentation bundle for more detailed
    instructions):
    * Download and install JSSE 1.0.2 or later, and put the JAR files
    into "$JAVA_HOME/jre/lib/ext".
    * Execute:
    %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
    $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
    with a password value of "changeit" for both the certificate and
    the keystore itself.
    By default, DNS lookups are enabled when a web application calls
    request.getRemoteHost(). This can have an adverse impact on
    performance, so you can disable it by setting the
    "enableLookups" attribute to "false". When DNS lookups are disabled,
    request.getRemoteHost() will return the String version of the
    IP address of the remote client.
    -->
    <!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8080" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="100" debug="0" connectionTimeout="20000"
    useURIValidationHack="false" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to -1 -->
    <!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8443" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" scheme="https" secure="true"
    useURIValidationHack="false" disableUploadTimeout="true">
    <Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
    clientAuth="false" protocol="TLS" />
    </Connector>
    -->
    <!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8009" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" connectionTimeout="0"
    useURIValidationHack="false"
    protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <!--
    <Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
    port="8009" minProcessors="5" maxProcessors="75"
    acceptCount="10" debug="0"/>
    -->
    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8082" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" connectionTimeout="20000"
    proxyPort="80" useURIValidationHack="false"
    disableUploadTimeout="true" />
    -->
    <!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083 -->
    <!--
    <Connector className="org.apache.catalina.connector.http.HttpConnector"
    port="8083" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" />
    -->
    <!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
    <!--
    <Connector className="org.apache.catalina.connector.http10.HttpConnector"
    port="8084" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" />
    -->
    <!-- An Engine represents the entry point (within Catalina) that processes
    every request. The Engine implementation for Tomcat stand alone
    analyzes the HTTP headers included with the request, and passes them
    on to the appropriate Host (virtual host). -->
    <!-- You should set jvmRoute to support load-balancing via JK/JK2 ie :
    <Engine name="Standalone" defaultHost="localhost" debug="0" jmvRoute="jvm1">
    -->
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Standalone" defaultHost="localhost" debug="0">
    <!-- The request dumper valve dumps useful debugging information about
    the request headers and cookies that were received, and the response
    headers and cookies that were sent, for all requests received by
    this instance of Tomcat. If you care only about requests to a
    particular virtual host, or a particular application, nest this
    element inside the corresponding <Host> or <Context> entry instead.
    For a similar mechanism that is portable to all Servlet 2.3
    containers, check out the "RequestDumperFilter" Filter in the
    example application (the source for this filter may be found in
    "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
    Request dumping is disabled by default. Uncomment the following
    element to enable it. -->
    <!--
    <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
    -->
    <!-- Global logger unless overridden at lower levels -->
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="catalina_log." suffix=".txt"
    timestamp="true"/>
    <!-- Because this Realm is here, an instance will be shared globally -->
    <!-- This Realm uses the UserDatabase configured in the global JNDI
    resources under the key "UserDatabase". Any edits
    that are performed against this UserDatabase are immediately
    available for use by the Realm. -->
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    debug="0" resourceName="UserDatabase"/>
    <!-- Comment out the old realm but leave here for now in case we
    need to go back quickly -->
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <!-- Replace the above Realm with one of the following to get a Realm
    stored in a database and accessed via JDBC -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="org.gjt.mm.mysql.Driver"
    connectionURL="jdbc:mysql://localhost/authority"
    connectionName="test" connectionPassword="test"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
    connectionName="scott" connectionPassword="tiger"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="sun.jdbc.odbc.JdbcOdbcDriver"
    connectionURL="jdbc:odbc:CATALINA"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!-- Define the default virtual host -->
    <Host name="localhost" debug="0" appBase="webapps"
    unpackWARs="true" autoDeploy="true">
    <!-- Normally, users must authenticate themselves to each web app
    individually. Uncomment the following entry if you would like
    a user to be authenticated the first time they encounter a
    resource protected by a security constraint, and then have that
    user identity maintained across all web applications contained
    in this virtual host. -->
    <!--
    <Valve className="org.apache.catalina.authenticator.SingleSignOn"
    debug="0"/>
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.AccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <!-- Logger shared by all Contexts related to this virtual host. By
    default (when using FileLogger), log files are created in the "logs"
    directory relative to $CATALINA_HOME. If you wish, you can specify
    a different directory with the "directory" attribute. Specify either a
    relative (to $CATALINA_HOME) or absolute path to the desired
    directory.-->
    <Logger className="org.apache.catalina.logger.FileLogger"
    directory="logs" prefix="localhost_log." suffix=".txt"
    timestamp="true"/>
    <!-- Define properties for each web application. This is only needed
    if you want to set non-default properties, or have web application
    document roots in places other than the virtual host's appBase
    directory. -->
         <DefaultContext reloadable="true"/>
    <!-- Tomcat Root Context -->
    <Context path="" docBase="ROOT" debug="0"/>
    <!-- Tomcat Examples Context -->
    <Context path="/examples" docBase="examples" debug="0"
    reloadable="true" crossContext="true">
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="localhost_examples_log." suffix=".txt"
    timestamp="true"/>
    <Ejb name="ejb/EmplRecord" type="Entity"
    home="com.wombat.empl.EmployeeRecordHome"
    remote="com.wombat.empl.EmployeeRecord"/>
    <!-- If you wanted the examples app to be able to edit the
    user database, you would uncomment the following entry.
    Of course, you would want to enable security on the
    application as well, so this is not done by default!
    The database object could be accessed like this:
    Context initCtx = new InitialContext();
    Context envCtx = (Context) initCtx.lookup("java:comp/env");
    UserDatabase database =
    (UserDatabase) envCtx.lookup("userDatabase");
    -->
    <!--
    <ResourceLink name="userDatabase" global="UserDatabase"
    type="org.apache.catalina.UserDatabase"/>
    -->
    <!-- PersistentManager: Uncomment the section below to test Persistent
    Sessions.
    saveOnRestart: If true, all active sessions will be saved
    to the Store when Catalina is shutdown, regardless of
    other settings. All Sessions found in the Store will be
    loaded on startup. Sessions past their expiration are
    ignored in both cases.
    maxActiveSessions: If 0 or greater, having too many active
    sessions will result in some being swapped out. minIdleSwap
    limits this. -1 or 0 means unlimited sessions are allowed.
    If it is not possible to swap sessions new sessions will
    be rejected.
    This avoids thrashing when the site is highly active.
    minIdleSwap: Sessions must be idle for at least this long
    (in seconds) before they will be swapped out due to
    activity.
    0 means sessions will almost always be swapped out after
    use - this will be noticeably slow for your users.
    maxIdleSwap: Sessions will be swapped out if idle for this
    long (in seconds). If minIdleSwap is higher, then it will
    override this. This isn't exact: it is checked periodically.
    -1 means sessions won't be swapped out for this reason,
    although they may be swapped out for maxActiveSessions.
    If set to >= 0, guarantees that all sessions found in the
    Store will be loaded on startup.
    maxIdleBackup: Sessions will be backed up (saved to the Store,
    but left in active memory) if idle for this long (in seconds),
    and all sessions found in the Store will be loaded on startup.
    If set to -1 sessions will not be backed up, 0 means they
    should be backed up shortly after being used.
    To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
    and minIdleBackup all to -1, saveOnRestart to false, then restart
    Catalina.
    -->
    <!--
    <Manager className="org.apache.catalina.session.PersistentManager"
    debug="0"
    saveOnRestart="true"
    maxActiveSessions="-1"
    minIdleSwap="-1"
    maxIdleSwap="-1"
    maxIdleBackup="-1">
    <Store className="org.apache.catalina.session.FileStore"/>
    </Manager>
    -->
    <Environment name="maxExemptions" type="java.lang.Integer"
    value="15"/>
    <Parameter name="context.param.name" value="context.param.value"
    override="false"/>
    <Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
    type="javax.sql.DataSource"/>
    <ResourceParams name="jdbc/EmployeeAppDb">
    <parameter><name>username</name><value>sa</value></parameter>
    <parameter><name>password</name><value></value></parameter>
    <parameter><name>driverClassName</name>
    <value>org.hsql.jdbcDriver</value></parameter>
    <parameter><name>url</name>
    <value>jdbc:HypersonicSQL:database</value></parameter>
    </ResourceParams>
    <Resource name="mail/Session" auth="Container"
    type="javax.mail.Session"/>
    <ResourceParams name="mail/Session">
    <parameter>
    <name>mail.smtp.host</name>
    <value>localhost</value>
    </parameter>
    </ResourceParams>
    <ResourceLink name="linkToGlobalResource"
    global="simpleValue"
    type="java.lang.Integer"/>
    </Context>
    </Host>
    </Engine>
    </Service>
    </Server>

    To use servlets u have indeed to update your web.xml...Well I'm not sure this is relevant to your case anyway.
    You have to add a <servlet> element to this file.
    Something like this:
    <servlet>
    <servlet-name>blabla</servlet-name>
    <servlet-class>blablapackage.Blablaclass</servlet-class>
    <init-param>...</init-param>
    </servlet>
    Now this may not solve your problem. Make sure you refer to your servlets using their full qualified names.btw, just to be sure, what is your definition of "servlet"? (i mean: any java class or only javax.servlet.Servlet)

  • Problem in updating Nokia 5800 firmware v30.0.011...

    hi guys,
    few days ago i saw that new firmware update available( v40.0.005) is available for nokia 5800
    i have  its v30 firmware version and i am unable get any kind of updates while i checked that new version of firmware is available in India. my product code is :0575590
    i want change my firmware it has got frequent hanging problem....
    plz..... help 
    Solved!
    Go to Solution.

    Overall the phone is good with this firmware u can look around on these boards for the bugs people encountered with it so far. No hangs and crashes so far but i cant vouch for it.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • Can't update my N96 firmware

    I have downloaded Nokia Software Updater for my N96, when I run the program it says my current firmware is 10.065 and that an update of 11.101 is available. I have downloaded the 115mb update, everytime I start the update process it never gets past saying 15 minutes to go, then it goes into phone recovery mode. I can never get past this point. I have tried uninstalling and reinstalling the program but this has not worked. During the time it trys to update the firmware it sounds like the phone disconnects from the computer a number of times. I am running Windows XP on my laptop and using the latest version of Nokia Software Updater. Can somebody please help me?
    Message Edited by better61 on 27-Oct-2008 11:58 AM

    Must say..i have my K700i which still seemlesly connect to PC on bluetooth as a remote and works like a charm. Syncs with all PC softwares and keeps me updates.
    Nokia advertised DVB-H in N96 which is just useless in UK. Then coming to Navigation ... well They have got technology but they are making it useless when not providing API functions for programmers. I have not seen any good coding practice for Media Player on Nokia Phones. Last time I played an FLV file on Nokia and it went straight to media player where I am not allowed to create playlist or even ask it to search for Stored video files.
    Menus and Settings are so customized and blocked by service providers that most of you might have not noticed but when even I click centre button about 76% of time it goes to another menu and I have to come back.
    During driving you should be able to go on handsfree or loudspeaker with press of at most two buttons. If you are using an application you have to come to main screen to switch on loud speaker which is not a good thing as this phone has got about 8 buttons which can be easily configured to provide such functionality with just single press (or keep press for 5 seconds)
    Anyways I think there are better programmers and coders present with SE than Nokia and when Nokia decided using OpenSource Symbian it should respect OpenSource developers and help them to develop things and ideas. Nokia focus on opportunities to advertise and create communities to discuss problems rather than releasing hassle-free product. Why cant Nokia sort out its already released handsets first and then go for any new ones. Afterall when they release new handset they make an impression that previous one was just **bleep** and you should pay a little more to get this one. I think this will become a term for Nokia - Next only Known investing Asinine (The only known next foolish thing to spend your money on) The rest of them you might know after spending but this one for sure.

  • Shall i update  my ipad 3 to 6.0

    i have bought the new ipad 3 and when i plug it into my laptop and it connects to itunes it asks if i want to update to 6.0 software,does it have any advantages is it safe to do and will it delete my notes,i did a system update on my android phone once and it deleted all my notes some quite important,

    Yes. It will ask you to save a backup before you do. Make sure you back it up and you won't loose your notes.

  • Mfe not working proper on N96 firmware v30

    Dear Sir,
    i have changed my phone from nokia n95 to nokia n96,
    firmware version 30.x.
    Mfe doesn't work with charm here.
    I have attached log file for your further help.
    I have to uninstall it and reinstall it every.
    Mail For Exchange Error -15032 is one of the errors.
    Hope to hear very positive from you.

    I think the only thing you can try now is a hard reset. Unfortunately it means that all the data in your phone's internal memory (C: drive) is lost, so unless you've done a backup recently...
    With the phone switched off, press simultaneously the 3, * and green 'call' buttons. Keep them pressed in and switch the phone on. Do not release them until you see signs of life such as the Nokia logo or the region selection screen.
    It may take somewhat flexible fingers and more than one attempt to do this.
    If it doesn't solve the problem then your only course of action is to take your phone in to your local Nokia Care Point.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • I have a iMac purchased in april of 2011.  I have OS 10.8.5 .  What shall I update to?  Maverick?  Any help about this will be appreciated.  Thank you!

    I have an iMac Operating System 10.8.5   12 GB 1333 MHz DDR3   3.2 GHZ intel Core i3.
    I'd like to upgrade to Maverick. Can someone help me with finding the right download for this and how to install it?

    What would an upgrade do for me?
    This is an overview of the Yosemite operating system: OS X Yosemite - Overview
    Here are some reviews on Yosemite:
    Bottom line: Should you upgrade to OS X Yosemite ...
    OS X Yosemite: Don't think twice, upgrade from OS X 10.9 ...

  • Using Photoshop CS6 - shall I update to Yosemite?

    I have read that some users experience brush lags in Photoshop CS6, and some others report their dialog windows opening up partly outside the screen.
    I don't want to use Adobe CC for now.
    Is it safe to upgrade to Yosemite or should I rather stay on Mavericks as long as possible?
    Thanks!

    FWIW, I have been using Photoshop CS6 and Yosemite for quite some time
    now without issue.  It is being used on a late 2013, 27", 3.2GHz iMac with
    32GB of RAM and an attached Thunderbolt display.  This may or may not have
    a bearing on the lack of issues.

  • Shall I update iMovie '08 to iMovie '11?

    I'm interested in downloading iMovie '11 from the new App store for £8.99 as I like the idea of the new features it offers. However, I've heard mixed reviews about it and I am unsure if I can hop from iMovie 08' straight to iMovie '11 on my system? (Mac OS X 10.6.6)
    Can someone help please?

    Is it worth upgrading to iMovie '11?
    Yes, you will like iMovie 11 much better than iMovie 08 (still not as good as iMovie 06, but, it's what we got).
    from the new App store for £8.99
    I would buy iLife 11 on disc.
    I have found that the physical possession of the software on a DVD or CD is a better way to go. There have been many times when I have needed to reinstall software and the software is no longer available online for any amount of money.
    In the event you have a computer problem and must rebuild your system or reinstall software, it is always easier to do so if you have the physical media in your possession. Later, if you uninstall the software from your computer you can usually sell the disc when you upgrade.
    Look at all of the Mac users who pay upwards of $100 for iLife 06, just so they can get a copy of iMovie 06.
    Maybe I'm just old-fashioned (I go back to the paper tape days for program storage). I want to hold the software in my hand.

  • N96 V30.033 Power Saver Problems

    Hi there,
    I've just recently updated my N96 to V30.033 and now the power saver does not seem to work properly.
    I have an .swf animation set in the Power Saver options (power save timeout set to 30 secs). After 30 secs when it tries to go into power save, the animation comes up briefly, and then comes out of power save (back to the standby screen. or whatever screen you had open last).
    It will just keep doing this in a loop.
    It used to work on the last firmware, any ideas?
    The only way to stop this is not to use an animation.
    Thanks.

    Binx:This is definitly one of the problems comin directly from the firmware, because it used to work for me before as well and now all of a sudden with this **bleep** firmware, we are back to triangle of worst firmwares (V10, V11, V30)............
    Nokia N96-1 (RM-247)
    Firmware version: 30.033
    Made in Finland

Maybe you are looking for

  • How do i pass a variable in flex

    i've been looking all over google for how to pass a variable yet i've come up empty handed i have a C code and as3 i've never been able to get a C program to compile on my own, this is from a tutorial im trying to understand about raycasting from wha

  • Link Between Service Notification and Sales Order

    Hi All, In our business process, we will create sales order from Service Notification and we can see the same in the Document flow. But when i check in the VBFA table, there are no entries. I would like to know how the document flow is updated withou

  • Opening an .exe files on a MAC. Please Help!!!!!!!

    I have a disk that comes with one of my textbooks for school and the application i need to run with excel as a problem slover is an .exe (bundle).Is it possible to open this file at all on my MAC or am i just out of luck?

  • Korg micro37 keyboard turns off after a few seconds

    Hi all, My Korg micro37 keyboard turns itself off after about 4 seconds after I plug the keyboard in. Any idea why this happens? It doesn't happen on a Ubuntu 12.04 laptop, but does on another Arch laptop with 3.7.1 kernel. I had the same problem wit

  • Ive just download ios7 and it says slide to set up but when i slide it does nothing

    ive just download ios7 and it says slide to set up buw when i slide it does nothing and now i cant get into my phone...help??