Shape is auto segmented after saving

This screen shot shows part of a shape, this shape was solid with a gradient accros it and now for some reason its got all these rectangles split into it. ( screen shot shows mouse hoovering over one of these rectangles ).
When you save the document as a PDF you can see all the lines which the shape has split into.
Im guessing it has something to do with the gradient? I need to revert it because the shape was quite complicated to draw and i'd rather not have to redo it.

rebeccatelrock wrote:
just saved it as a PDF, I never actually closed the file, just saved it as a PDF and then it went like that.
That shouldn't happen. Just saving a PDF shouldn't explode your paths.
On top of that you saved a PDF with Illustrator Editing Capabilities, so the original objects actually should be there.
What exactly did you do to that object inside Illustrator? This particular result should only happen when applying Object > Expand.
Did you already close the file at some step or can you still revert?

Similar Messages

Auto transfer order session immediately after saving delivery in vl01n

Hi all,
Auto transfer order session immediately after saving delivery in vl01n means when do the delivery with vl01n system should open LT03 t.code session on the same session , how to achieve this please advice me.
Regards,
Krishna

Hi Krishna,
Please have a look at the SAP note 566090 FAQ for immediate transfer order creation, this note give you some explanation about immediate TO creation...
Regards,
Mauro

How to auto open PDF after saving a file?

Hi!!! How y'll doing? I just switch to Mac recently. So can you guys kindly advise how do set auto open PDF file after save as a PDF file.
What am I trying to say is that, I have a excel file and I want it to auto open after I save as PDF file.

We are currently having users processing a large number of PDF's and would like to know if this is possible as well. The Save as PDF... option right now does not open the PDF file after it is created.

Word 2010 document becomes Read-Only after saving it

Hi,
My Word 2010 document is becoming "Read Only" after saving it, for information my doucment is on the desktop . I searched on this forum and find a couple of solutions (deactivating auto saving, etc.) but it does not work at all. Any other ideas?
Thanks,
Sylvain.

, I wonder why the docuemnt is becoming Read-Only when I am saving it on the Desktop...
I've read articles and blogs of people arguing each side of whether you should use the Desktop as a storage folder and I really
don't have anything substantial to add to either the pro or con side of the issue.
However, what I know about Word is that it behaves a bit different and seems to have issues when you’re actively editing document that are stored
on the Desktop. I would speculate that the issue has something to do with the screen driver software.
When you’re editing a document, Word is actually using something like a dozen or more temporary hidden files and some of these are stored in the
same folder as the source document. If the source document’s folder is the Desktop, then there has to be interaction with the screen driver.
This interaction with the screen driver is one variable that makes the Desktop folder unique and possibly problematic and thus Word under certain conditions
makes the file Read Only.
Kind Regards, Rich ... http://greatcirclelearning.com

The approver does not show in the approval preview after saving sh. cart

Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1.     Shopping created
2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3.     Shopping cart is saved.
4.     After saving , Check status transaction shows the shopping cart in status awaiting approval
5.     The section approval shows No workflow started , application error occurred
6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
7.     The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
Pawan

Hi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan

Background tile turns grainy after saving

I'm trying to make a background tile with a texture in it.
I'm probably missing a step somewhere but here is what I'm doing:
Open up a new documement 200 pixels square
Select the square with vector selection tool (this may be the
wrong step but I can't figure out how else to turn this into a
vector image so I can use the textures in the properties panel
--otherwise that panel is not available)
make sure it's 200x200
fill with desired color with paint bucket. (I used #cc9966
go to properties panel and choose "smoky" for a texture (i
want a sandy gravel tile)
Lighten it up by clicking on Filters/adjust color/hue
saturation (I set Hue at +9)
This looks just like what I want,
However after saving the image as a .gif it turns very
grainy.
Can someone tell me what I'm doing wrong?
.

Lorva wrote:
> thanks for that tip.
>
> How about the way I'm making this tile? It seems to me
I'm not going
> about this right. Even starting with the vector shape
tool it leaves
> a dark border around the tile.
Here are a couple of tutorials that might be useful.
http://www.projectseven.com/tutorials/images/pixel_tiles/index.htm
http://www.projectseven.com/tutorials/images/gradient_tiles/index.htm
http://www.projectseven.com/tutorials/images/gradient_tiles2/index.htm
http://www.projectseven.com/tutorials/images/grunge_backgrounds/index.htm
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Trying to email file from adobe reader 11.0 email addresses will not longer auto complete after moving to office 365

trying to email file from adobe reader 11.0 email addresses will not longer auto complete after moving to office 365. It did work with older versions of outlook. Tried changing to global address book. It will only access global address book offline

I have the same issue. On a clean machine with Office 2013 64 bit installed.

HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
I tried to undo it but the app crashed.
I am hoping there's like a previously saved version of my file in iCloud somewhere.

No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

Document number....posted in T Code F-53 is not popping after saving

Hi,
I am posting outgoing payment in new fiscal year 1.4.2014, in F-53. After saving the document, I am not getting the pop up message:
"Document number .... posted in T Code F-53.
But when I check the GL line item in FBL3N, the document number is visible there.
Please advice what can be the reason.

Hi,
I didnt check with other users. But I am facing this issue. May I know how the Security guy can help me and how its related to my authorization, since until yesterday everything was working fine.
Kindly advice, is there any link to the year end closing activity?

Could someone help me figure out why after saving a form some subforms are hidden again

I am asking this on behalf of a coworker. We have a form she is working on with a drop down (ddlDropDown) with 1, 2, and 3 listed (same values,,1,2,3) That trigger hidden subforms to appear (Employee1, Employee2, Employee3). Initially, Employee1 is visible. If form user selects 2 or 3 in the dropdown then Employee2 and Employee3 become Visible. Once the form is filled in, saved, closed and reopened Employee2 and Employee3 are hidden again even though the dropdown says 2 or 3. The script behind the dropdown's change event is:
subSELECT.Employee1.presence=this.rawValue==1?"visible":"hidden";
subSELECT.Employee2.presence=this.rawValue==2?"visible":"hidden";
subSELECT.Employee3.presence=this.rawValue==3?"visible":"hidden";
I have tried adding this code to the form's initialize, docReady, preOpen, postOpen, layout:ready events but it still doesn't work.
Any ideas?

Here is a sample I created based on your comments and it works just fine for me after saving the form.
Employee2 and Employee3 subforms have their presence property set to hidden. I have the script in the exit event of the dropdownlist.
Here is the sample:
https://workspaces.acrobat.com/?d=YWMOMIyD2lLEqPSdO0vqYQ

In Sales Order form populate charges field after saving the Sales Order

Can we populate Charges field in Sales Order form after saving the sales Order automatically.
The charges to be calculated based on the amount entered and the item selected in Sales Order.
In the Manual process it is done by hitting the Actions Button and then select the Charges.
The charge type would be "Freight Costs"

by using process_order API, I am able to update the charges field.

BADI / User Exit after Saving of Business Partner

Hi Experts,
Is there a BADI / user exit that is triggered after saving / updating of Business Partner using transaction code "BP"?
We want to send a XML file thru ALE after creation/modification of BP. We are using CRM WinClient 4.0.
Thanks.

Hi Mikhail Khorpyakov,
Thank you very much for your reply. It was a helpful answer.
BUPA_GENERAL_EXPORT is triggered before database update of table BUT000 and other related tables.
Is there a BADI that is called after saving which contains general data of business partner?
Thanks in advance..

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after saving as from word 2007 - I uninstalled Pro X1 and now when I save as from word 2007 to PDF it will

Can anyone help with this - do I have to uninstall Reader and then reinstall?

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after "saving as" from word 2007 - I uninstalled Pro X1 and now when I "save as" PDF from word 2007 to PDF it will save the document as a PDF but will not open the document to display after publishing - I have to got to where the file has been saved to view the new PDF document - this is really annoying - do I have to delete adobe reader and reinstall it - adobe needs to look at this conflict with acrobat pro as I have even gone it to properties and tried to have adobe reader as the default PDF program - the main issue is that I cannot view the PDF after publishing it from word 2007

Bug Report: "View PDF After Saving" Does Not Work When Saving as Photoshop PDF

The saved PDF file is not opening in Acrobat after saving a file as a Photoshop PDF. I noticed it happening a few times in earlier beta testing, but today it happened again.
I have Adobe Acrobat Pro 10.1.2 installed on MacPro with Lion OS 10.7.3. Photoshop public beta m415. System info can be provided if needed.
The file I was trying to save was about 8 MB. Once it failed to open after save, I tried varied PDF settings and save locations. Also tried several different files. All were saved properly as PDF files, but would not continue to open in Acrobat as previous versions have done. The files open properly when you click on the file names in saved location.
3153152
3153152

I'm happy I could help and feel a bit proud to have found a real bug. The simplest work around is just clicking on the file list once it's done...that's certainly not a problem.
Larry
=====================================
Larry Guyer
A la Carte Digital Studios
Archetype Digital Imaging Alliance
P.O. Box 4365
Foster City, CA 94404-0365
650-348-2525   office
323-372-1669   fax
650-444-7100   cell
www.alacartedigital.com
www.archetypeimaging.com

Shape is auto segmented after saving

Similar Messages

Maybe you are looking for