Shapes changed after i published - presenter 10

Hi,
when i publish a pptx with presenter 10 all the shapes i included in the slide turned to blue.
do you know why?
it didn't with presenter 9.
thank you for your answer
Fred

 

Similar Messages

  • Site changes after I publish it.

    Hi,
    I can do everything with iWeb without issues but when I publish it to a folder, the page becomes different from what I created.
    Why does it change after I publish it and what can I do about it?
    Thanks for reading my question.
    Hope you can help.

    I have had the same issue. Seems that some kind of version control problem is breaking things up. It helped me to change the name of the page eg by adding a version number. Every time I changed a page considerably I changed the name (increased the version number), saved and republished to folder. Make sure to verify the links from other pages to the page of which you changed the name.

  • Why does the font rendering change after I publish to the web?

    I created an animation in Edge Animate with four slides, using Open-Sans as the font. The font rendering looks good in Edge Animate and looks good in the local html version as well, but when I publish it to the website, the font formatting is not acceptable.
    Here is the local HTML version:
    Here is how it appears on the website:
    Is there a way to control this better?
    Thanks.

    Hopefully someone else will be brave enough to respond to this, but in the meantime, the best solution I have found so far is to post the animation files to a separate directory on the server. Then pull that page in using an iframe. This way the animation is not influenced by the parent page's styling.

  • IWeb NOT showing changes after publishing

    I had 2 sites I created with iweb. I made some changes on one, but not only did it not show any changes after I published it but said there was an error. I could access the site when I entered my basic domain name, but not through iweb. I deleted BOTH sites and started from scratch. Saved my work and tried publishing at least 5 different times. It STILL shows my DELETED sites (which I can't even see on my computer because I DELETED THEM!). MobileMe account is current. Domain name current.
    Anyone else having these issues? ANy idea what to do?
    Thanks

    But did you delete your site folder from MobileMe too? It's all very well deleting your site from iWeb, but if you really want to delete it and start again, you also need to delete your site folder and index file from MobileMe. Log into MobileMe and then go to your iDisk and delete the files from there too and then re-publish from iWeb and your new pages should show.

  • How to change shape properties after having created one?

    Photoshop CC 2014 -- latest update as of October 06, 2014
    Windows 7
    How can I change a shapes properties after having created one.
    I have created a simple ellipse.
    When I drew the ellipse with the tool, I had the option for the fill color/style and stroke, etc.
    After I have created said ellipse, I wish to change its properties.
    I can use the Paint Bucket, gradient tool, etc for the fill, but is there way to get back to the original set of tools with which I created the ellipse in the first place?
    If I use Edit > Stroke... it adds a new stroke around the existing shape.
    If I use Edit > Fill... the entire layer is filled.
    There must surely be a way to reenter the tool set to edit an existing shape. No?
    Thanks,

    Hi everyone,
    Thanks for the helpful tips, advice, etc.
    I didn't explain myself very well--I apologize.
    However, with your tips I figured it out:
    When I create a rectangle or ellipse, I can later click on its layer and the Properties window appears with options to change their "Live Shape Properties."
    However, not so with the Polygon and Shape tools. With them, the Properties window shows only the Masks, but the Toolbar still shows some basic properties I can change.
    I was stymied by the above differences while working only on a Shape.
    I've attached two JPEG screenshots.
    I didn't need to change the actual shape, just the fill/stroke, etc.
    Later, I may wish to change the actual shape, but that appears to be done by simply creating something new.
    Thanks much!!

  • How do I change the theme in Presenter to publish a page flip effect?

    I would like to change the theme in Presenter to save as and look like: http://page-flip.com/
    How do I change the theme in Presenter to publish a page flip .swf & .pdf effect?
    Thank you for reply with help!

    You can increase the font size and automatically page view changes. Go to menubar; Reading -> PDF View or Epub Text Size (depending upon the ebook) and increase the size.

  • If I use presenter trial version, will my published presentation also expire after a month?

    If I use presenter trial version, will my published presentation also expire after a month? - I know that this is true with captivate, but not sure with presenter. please help. thanks!

    No, the publish content will not expire.
    You will not be allowed to use Adobe presenter after the trial expire but your project will be Ok.
    Thanks,
    Sunil
    Adobe Presenter Engg Team

  • Using MassReplaceIt to update changes after publishing in iweb

    I've downloaded massreplaceit as suggested by users to update changes after publishing in iweb. i've been told this makes it easier. for example, i have a paypal button that i have to re-do everytime i publish that page on iweb. how do i use massreplaceit to make this easier? i have no idea.
    Thanks

    i think you got a bit confused here
    No offense Max, but I think you might be confused too
    2. there is no syncing needed for publishing iWeb
    sites or adding PayPal buttons.
    Not necessarily true. It depends on how you access your iDisk.
    Method 1:
    Turn on local copy of your iDisk in System Prefs, with or without automatic syncing.
    If you publish your site via iWeb, now the updated pages exist online but the old pages are on your local iDisk. You need to sync (automatically or manually) to get the new pages on your local iDisk (on your computer).
    Then you can open the updated files, make your html changes in Text Edit or whatever program, and SYNC AGAIN (automatically or manually) to update the online version of the site to match what you have just changed on your local iDisk
    Method 2:
    Mount the iDisk when needed via the "Go" menu in Finder. This is the ONLINE VERSION of your iDisk, not a local copy. When you publish your site via iWeb, the changes INSTANTLY appear on the iDisk on your desktop. If you make html edits or other changes, they appear INSTANTLY online.
    i hope you now are not confused about syncing!
    max
    Hope everybody understands now
    varkgirl

  • My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

    My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

    If your fonts are changing when viewed on other computers - epecially those running windows - you need to look at using web-safe fonts...
    http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
    Also make sure you clear your browser cache before viewing you published files.

  • Can ASN be changed after published?

    HI, exports
          Could you tell me if ASN can be changed after puhlished and how to do if it could?
         Thanks
         Jesse

    Hi, Nikhil and shankar
       thank you very much ,   published ASN change has been worked as you said.
       But ,  the idoc in ECC about DESAD  occured error while updating.
      /SPE/ID_HANDLING 125   Error during inbound delivery modification
      /SPE/ID_HANDLING 101   You cannot change status of inb. dlv. head 0180000490 from 'non-hold' to 'hold'
       /SPE/INBVAL  038    Replacements only accepted for warehouse of type EWM or in TPOP scenario.
      Do you give some support?
      Thanks
      Jesse

  • Web pages are different after I publish-hyperlinks off, and more...

    I created eight web pages with hyperlinks on photos and text. The photo hyperlinks work, but the text links do not.
    Some of my formatting has changed after publishing. Most common example, I have a thin, white line above several photos. I've tried several ways to correct the problems, all to no avail.
    After I publish to a folder, how do I find the file size of what will be published?
    Thank you, in advance.

    Some of my formatting has changed after publishing.
    Most common example, I have a thin, white line above
    several photos. I've tried several ways to correct
    the problems, all to no avail.
    The easiest way to get rid of this white line...click on the affected photo, open up the Inspector and click on the Ruler tab. Now increase the height of the photo by one or two pixels. This should work.
    The other method is to select the affected photo, open up the Inspector to the Shapes tab and change the opacity of the photo to 99%. This should also work.
    Basically, both methods work by forcing iWeb to re-render the image as PNG by changing the photo ever so slightly.
    After I publish to a folder, how do I find the file
    size of what will be published?
    After you publish to a folder, just select the folder in the Finder and type "Apple-i" to get the size of the folder. Is this what you are after?

  • My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.

    My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.  When I "Preview In Browser" through Edge it plays (I have created a shape and used the "play video full screen" snippet)  in full screen mode just fine.  When I "Preview Site In Browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing.  I am new to both programs and can't figure out why it will work out of the preview window in Edge and won't work when I publish to Muse.  Does anybody have an answer or a work-around for me?

    Hi Watch this video,
    If this is what you need, you can get it here [[zazaalaza's]].mulib - Google Drive

  • Pop-ups (custom animations) work in PPT presentation, but don't in published presenter PDF

    Pop-ups (custom animations) work in PPT presentation, but don't in published presenter PDF. I created a file in PowerPoint 2003 that allows the user to click on words in a graphic and have definitions of the word pop-up. This only works in the PPT presentation, it does not work when I publish the file to PDF using Adobe Presenter, version 7.0.5, build 7588. Any suggestions?

    MKO,
    That's not entirely surprising.  Unfortunately, what you're doing cannot be replicated or executed properly in Presenter content, because trigger functions are essentially Active X controls native to the PowerPoint environment.  And that's the problem: Active X commands are totally ignored when your deck is converted during the publishing process.
    So what to do?
    You have 2 options, and neither are "clean" solutions because each represents a bit of homework.
    Scenario 1: what you could do is create a series of hidden slides that are associated with / correspond to each of the text elements you have on the first slide.  You'd have to assign hyperlinks to the text boxes and then point the hyperlinks to the associated hidden slide.  The upside here is that if you have to edit any content after-the-fact, is that you can conduct such edits directly in PowerPoint.  But there is a drawback too; namely, that if you have to keep track of slide views, hidden slides are not tracked at all by LMSs (including Adobe Connect), so you'd have to come up w/ a formula for counting the number of visible slides so your presentation will mark a "complete" on the LMS.
    Scenario 2: create a Flash interaction that effectively does the exact same thing.  The drawback to this I hope is obvious: if you have any content edits, then you're forced to edit the file directly in Flash.  The good news here, however, is that this solution only requires one slide, so you can effectively keep track of slide views if that's something you need if the course is deployed on an LMS.
    Again, perhaps not ideal, but the above does represent alternative solutions to what you attempted to do in your sample deck.
    Rob
    http://www.robrode.com/yabb/

  • Suddenly my published presentations won't open

    After months of no problems, suddenly my published presentation won't load. When I click index.htm, the adobe icon just spins endlessly.
    The data folder does contain swfs for all the slides.
    I have the 7.0.7 version. I haven't done anything unusual to any of the slides lately--just have been beavering away, adding and editing content as usual. Never had any problems until now.
    Here's what I've tried--none of these actions made any difference:
    repairing Presenter
    uninstalling and reinstalling Presenter
    saving as PPT and then publishing]
    deleting all the quiz slides
    deleting all the placeholders on my template slides (not a viable solution anyway, I am required to use a corporate template).
    What can I do? I am on a strict deadline, anyhelp will be appreciated.

    OK, I found a fix: I copied all the files into a new presentation, which built into a new presentation that displayed just fine.
    So somehow my original file got corrupted.
    It's good to document this fix here so that others can find it. It does not seem to be documented on the web. Maybe it's common knowledge, but not to relatives newbies I'm guessing.
    fingers crossed that this fixed it.

  • Dragging Smart Shapes changes their size?

    Adobe Captivate 6 on Windows 7 64 bit: When dragging a Smart Shape with the drag hand by its body, the shapes change size and ratio.
    How do I keep a shape the same size while dragging? Has anyone else seen this happening?
    My problem is specifically with the shape: round-cornered rectangle. I have not tried to duplicate it with other shapes.

    Lilybiri, thank you so much for your advice. It has been a few days before I could get back to you. Sorry this took me so long to thank you.
    The input I most needed was when you told me the behavior was indeed abnormal. I was really hoping for that.
    The resolution was straightforward. I took your suggestion one step further. I restarted Windows, and the behavior has gone away.
    By the way, I'm starting to see these kinds of anomalies from other products in my Windows 7 64 bit environment. Once in a while, a newly installed feature or package behaves oddly until after a full shutdown. I didn't have this at all Windows XP. Perhaps it's unfair to point to the operating system, but I am wondering.
    Many thanks.

Maybe you are looking for

  • JFrame can not be visiable on WinXP.

    I create a frame which extends from JFrame. when a button is clicked, the frame should be visiable. On Win 2000, it runs, but on Win Xp , it does not run, the frame does not appear. But the other frame which also extends from the JFrame runs on both

  • Can you explain Functionality of F.13

    HI, In our business scenario, we have to create import PO's with multiple vendor (it means one original vendor & balance pricing condition vendors). If MIGO is done, but partial MIRO is done for pricing condition vendor in such cases how F.13 will be

  • How to use colors in a progressbar

    hi! can you please telle me how to use colors in my application, i mean how should i use a color as a parameter such as : progressBar.setBackground(Color); in this examlpe, how shoul i pass the paremeter? in which codification, shall i pass it like t

  • SAFARI QUITS WHEN TRYING TO OPEN PDF'S

    Every time i link to an PDF file safari Unexpectedly quits. This happens over and over again regardless of the website from where the PDF comes from. Can anyone help this annoyance.

  • Why can't I display content from more than one domain in my web app?  Is there a workaround?

    I'm trying to display 2 datasources in different views of my web app, an rss from twitter, and an rss from wordpress,  but for some reason dashcode doesn't allow this.  Is there code that can fix this?  A source paramater change code (shown below) is