Share a domain in IMS 5.2

I am configuring a IMS5.2 with Direct Mode, and I have to share a domain with another server which I do not manage, (in this server is the end of the domain) .
so, which would be the best way to send all the emails whose addresses are not known by my ldap server, to the server which I do not manage?

Documentation for "domain smarthost" is found in the provisioning guide:
http://docs.sun.com/source/816-6018-10/domains.htm#29147

Similar Messages

  • Sending mail through multiple domains with iMS

    I have iMS configured and working fine for multiple domains (users are
    members of multiple domains). I have done this with a main email address
    (main.com), and alternative email addresses to the other domains (alt1.com,
    alt2.com...) so that there is one central mail location at (main.com). This
    works great for receiving emails.
    However, when I send email I would like to be able to show the FROM address
    being from one of the alternate domains (alt1.com, alt2.com...) rather than
    the main domain (main.com) sometimes. I have authentication turned on for
    the sending messages, and users are logging in as ([email protected]). I assume
    there is something I can add that will allow this to happen as long as a
    valid address exists on my server. Any thoughts?
    main domain: main.com (All mail is addressed from this domain)
    alt domains: alt1.com, alt2.com...
    Thanks in advance, Chris

    BTW I am using iMS 5.1.
    -Chris
    I have iMS configured and working fine for multiple domains (users are
    members of multiple domains). I have done this with a main email address
    (main.com), and alternative email addresses to the other domains(alt1.com,
    alt2.com...) so that there is one central mail location at (main.com).This
    works great for receiving emails.
    However, when I send email I would like to be able to show the FROMaddress
    being from one of the alternate domains (alt1.com, alt2.com...) ratherthan
    the main domain (main.com) sometimes. I have authentication turned on for
    the sending messages, and users are logging in as ([email protected]). I
    assume
    there is something I can add that will allow this to happen as long as a
    valid address exists on my server. Any thoughts?
    main domain: main.com (All mail is addressed from this domain)
    alt domains: alt1.com, alt2.com...
    Thanks in advance, Chris

  • Issues accessing domain share from domain controller

    Hi,
    About 2 weeks ago, 2 of my domain controllers at one of our facilities has lost access to a domain share. If I try to access the share from the dc's, it prompts for a username/password. Now if I go to my workstation at corp, the share works fine. I can't
    seem to figure out where the problem is. Any suggestions?
    Thanks in advance!

    You can use dcdiag and repadmin to check your DCs and your replication health status. That should let you see if something is wrong.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Multiple domains in iMS 5.1

    I have 2 domains that I need to host for email.
    i.e. main.com and alternate.com
    I am migrating from NMS 3.6....... this was so easy there, just fill in
    the table for "local domains handled by this host"
    That was it, I can't find anything related to that in the docs. This
    must be simple, so how?
    Details please, do I add or change the rewrite rules? aliases?
    Putting the alternate email addresses in users ldap doesn't seem to
    work.
    Any help would be appreciated.
    Dave Kirchhoff

    It is easy if you have installed iDA4.5 for iMS5. iDA will set up the new
    mail domains for u in LDAP. If you do not use iDA then u must create a new
    LDAP
    entry for the relevant domain.
    You should also add a line to the re-write rules to allow the hosted domain
    mails
    to be delivered locally.
    The alias file will be populated by dirsync. There shouldn't be any need to
    manually
    edit this for mail users.
    David Kirchhoff wrote:
    I have 2 domains that I need to host for email.
    i.e. main.com and alternate.com
    I am migrating from NMS 3.6....... this was so easy there, just fill in
    the table for "local domains handled by this host"
    That was it, I can't find anything related to that in the docs. This
    must be simple, so how?
    Details please, do I add or change the rewrite rules? aliases?
    Putting the alternate email addresses in users ldap doesn't seem to
    work.
    Any help would be appreciated.
    Dave Kirchhoff

  • Win 7 Client cannot access Win 2012 share by domain name

    Hello Everyone,
    We have Windows 2012 R2 Server configured as Domain cum File Server Role,
    There are 20 Win7 Clients / Domain Users who access and used their specific folder on server with \\Servername\Foldername
    After some hour (not fixed) for some users (not specific) the server path goes unavailable, but the same folder is accessible with IP address like \\192.168.1.1\Foldername. and after rebooting Win7 Client we can again access the server folder with name.
    This happen to any users anytime and the same time other users can access their folder by name,
    Please help me on this issue..
    Thanks in Advance

    > After some hour (not fixed) for some users (not specific) the server
    > path goes unavailable, but the same folder is accessible with IP address
    > like \\192.168.1.1\Foldername. and after rebooting Win7 Client we can
    > again access the server folder with name.
    This is a kerberos issue.
    By default, tickets (especially the TGT which is issued at logon) have a
    live time of 8 hours or so (can be adjustet). If this ticket expires and
    cannot be renewed (due to a lack of connectivity to a DC or whatever
    infrastructure issue), Kerberos fails and ressources cannot be accessed
    via name.
    IP on the other hand always uses NTLM and thus still works.
    How the Kerberos Version 5 Authentication Protocol Works:
    https://technet.microsoft.com/library/cc772815.aspx
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Windows machines unable to access smb shares

    I know many people are having problems with smb on osx server, but my issues seems very basic, so I will try to ask for help here.
    Basically, I have set up a single folder for sharing on a Mac Mini running OSX Mountain Lion Server. Directory services are provided by a WIndows 2003 server, and I have joined OSX Server to that, and am able to see all AD users and groups correctly. I have checked the boxes specifying I wish to share as afp, smb and webdav and also made shares accessible to guests.
    Now, if I use a mac client, I can correctly browse the afp and smb shares, and the latter work via finder and smbutil as expected, including access via AD users, connection and file transfer.
    If, instead, I use a windows client (I tried both Win7Pro and WinXP), while being able to ping the osx server machine, if I try to "explore" (entering \\hostname in explorer) the shares I get a "Network error: impossible to access ..." (approximate translation, sorry ). I tried both using the hostname and the ip address, always getting the same result.
    If I try via prompt with "net view \\hostname" I get a System Error 53 (Unable to find network path).
    Does anyone know if I am doing anything wrong?
    Thanks
    Christian

    I have done some further testing, and I can report that occasionally, I am able to connect from a windows 7 professional machine by issuing the following command:
    net use z:\\hostname\share /user:DOMAIN\username
    mostly this command returns a 53 system error, but sometimes I am asked for the user's password and am then able to access the shared folder for a brief time.

  • Needed to copy the share from one server to share in another server

    Hi ,
    Needed to copy the data from one share named as xyz in the server 1 to the another share abc in another server 2.
    Share xyz data should be copied to the share abc which has already different data in it .We need to copy all the data from the share xyz to the share abc  without deleting any existing data in the destination share.
    I know that /MIR option will replace the destination same as source
    Can anybody help us in the Robocopy command & switches for this activity?
    Any help is greatly appreciated!
    Thanks & Regards S.Swaminathan Live & let others live!!!

    Hi Mandy,
    Thanks for your reply.
    I have done many robocopy for the share movements from the one server joined in a domain to another server joined in the same domain.In that instances, the destination server will not be having any share of the old server name and just I robocopy the share
    from the old server to the new server after creating a new share .The usual command is as follows:
    "\\server1\oldshare" \\server2\newshare" *.* *.* *.* /ZB /E /COPY:DATO /XJ /R:0 /W:0 /TEE /dcopy:T /NP /log:c:\robocopy.txt
    And after the copy , during the cutover of the standalone DFS pointing to the new share , the domain users in the corresponding access groups (name of the groups based on the old server name) of Full,Modify,Read will be appropriately copied to the respective
    new  groups (name of the groups based on the new server name) of the new share and the access is ensured by the users.
    But in this case , the destination server is already having a share with existing data in it and to be added with the old share data
    My question is shall I use the same command as before by copying all the data to the newly created subfolder inside the existiing destination share through the following command
    "\\server1\oldshare" \\server2\newshare\new sub-folder" *.* *.* *.* /ZB /E /COPY:DATO /XJ /R:0 /W:0 /TEE /dcopy:T /NP /log:c:\robocopy.txt
    You have already mentioned /E without purge options will do.
    Just asking one more time for the safer side
    Thanks & Regards S.Swaminathan Live & let others live!!!

  • Windows 2012 - SYSVOL replication and NETLOGON share

    After reading 100 tons of articles and links i decided to open this thread.
    I know today is 1st of april, but unfortunately for me this is not a joke.
    given:
    two 2003 DC's - physical servers
    two 2008 DC's - VM's on ESX 5.1 hosts
    two 2012 DC's - VM's on ESX 5.5 hosts
    domian fucntional level 2003
    situation:
    we plan to decom the 2003's.
    The 2008 DC's are in place since a while and working ok.
    We plan to upgrade to 2012 and here it is where the trouble starts.
    Firstly, I couldn't, by any means, to promote 2012 as DC's until i moved all the FSMO roles from the 2003 DC's to the 2008 DC's.
    After lots of work with the network team we made all the right connections opened the firewalls, made the DCDIAG and DNS tests and the only problem reported are the SYSVOL replication and NETLOGON share.
    I tried all the tools out there to check the replication and the last one is Microsoft's AdRplstatus Tool which made me think that either Microsoft makes fun of me, either i'm the dumbest windows admin on this planet.
    This tool reports that there are NO ERRORS in replicating SYSVOL, but when i run the command 'net share' the 'domain.com\sysvol\scripts' is not there. Further more checking, i try to access '\\domain.com\sysvol' - directory under which i must find the 'policies'
    and 'scripts' folders and, Sysvol is empty - obviously these are present when i do this check from the 2008 DC's or 2003 DC's.
    Is there a known issue for these problems regarding 2012 and ESX 5.5 ? - still, i doubt it.
    DCDIAG /TEST:DNS
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = dc-p01
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: dc-p01
          Starting test: Connectivity
             ......................... dc-p01 passed test Connectivity
    Doing primary tests
       Testing server: dc-p01
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             ......................... dc-p01 passed test DNS
       Running partition tests on : ForestDnsZones
       Running partition tests on : DomainDnsZones
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : domain
       Running enterprise tests on : domain.com
          Starting test: DNS
             Test results for domain controllers:
                DC: dc-p01.domain.com
                Domain: domain.com
                   TEST: Dynamic update (Dyn)
                      Warning: Failed to delete the test record dcdiag-test-record i
    n zone domain.com
             Summary of test results for DNS servers used by the above domain
             controllers:
                DNS server: 184.134.0.97 (<name unavailable>)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
    S server 184.134.0.97
                   dc-p01                       PASS
    PASS PASS PASS WARN PASS n/a
             ......................... domain.com passed test DNS
    The PTR record query for 1.0.0.127 is still there but i will change it manually, my DNS is set as primary to point to the server itself by it's IP and not 127.0.0.1.
    still, that DNS server with that error is a linux DNS, but all my DC's have DNS role on and fully replicating and working, including the 2012's.
    DCDIAG:
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = dc-p01
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: dc-p01
          Starting test: Connectivity
             ......................... dc-p01 passed test Connectivity
    Doing primary tests
       Testing server: dc-p01
          Starting test: Advertising
             ......................... dc-p01 passed test Advertising
          Starting test: FrsEvent
             There are warning or error events within the last 24 hours after the
             SYSVOL has been shared.  Failing SYSVOL replication problems may cause
             Group Policy problems.
             ......................... dc-p01 passed test FrsEvent
          Starting test: DFSREvent
             ......................... dc-p01 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... dc-p01 passed test SysVolCheck
          Starting test: KccEvent
             ......................... dc-p01 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... dc-p01 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... dc-p01 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... dc-p01 passed test NCSecDesc
          Starting test: NetLogons
             Unable to connect to the NETLOGON share! (\\dc-p01\netlogon)
             [dc-p01] An net use or LsaPolicy operation failed with error 67,
             The network name cannot be found..
             ......................... dc-p01 failed test NetLogons
          Starting test: ObjectsReplicated
             ......................... dc-p01 passed test ObjectsReplicated
          Starting test: Replications
             REPLICATION-RECEIVED LATENCY WARNING
             dc-p01:  Current time is 2014-04-01 10:25:09.
                DC=ForestDnsZones,DC=mydomain,DC=lan
                   Last replication received from DC-P02 at
              2014-03-31 15:22:40
                DC=DomainDnsZones,DC=mydomain,DC=lan
                   Last replication received from DC-P02 at
              2014-03-31 15:22:40
                CN=Schema,CN=Configuration,DC=mydomain,DC=lan
                   Last replication received from DC-P02 at
              2014-03-31 15:22:40
                CN=Configuration,DC=mydomain,DC=lan
                   Last replication received from DC-P02 at
              2014-03-31 15:25:50
                DC=mydomain,DC=lan
                   Last replication received from DC-P02 at
              2014-03-31 15:22:40
             ......................... dc-p01 passed test Replications
          Starting test: RidManager
             ......................... dc-p01 passed test RidManager
          Starting test: Services
             ......................... dc-p01 passed test Services
          Starting test: SystemLog
             A warning event occurred.  EventID: 0xA004001B
                Time Generated: 04/01/2014   09:26:35
                EvtFormatMessage failed, error 15027 the message resource is present
     but the message is not found in the string/message table.
                (Event String (event log = System) could not be retrieved, error
                0x3ab3)
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   09:27:52
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      fdc (C:\Windows\s
    ystem32\taskhost.exe).
             A warning event occurred.  EventID: 0xA004001B
                Time Generated: 04/01/2014   09:31:14
                EvtFormatMessage failed, error 15027 the message resource is present
     but the message is not found in the string/message table.
                (Event String (event log = System) could not be retrieved, error
                0x3ab3)
             A warning event occurred.  EventID: 0xA004001B
                Time Generated: 04/01/2014   09:32:13
                EvtFormatMessage failed, error 15027 the message resource is present
     but the message is not found in the string/message table.
                (Event String (event log = System) could not be retrieved, error
                0x3ab3)
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   09:32:53
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      c18 (C:\Windows\s
    ystem32\taskhost.exe).
             A warning event occurred.  EventID: 0xA004001B
                Time Generated: 04/01/2014   09:35:33
                EvtFormatMessage failed, error 15027 the message resource is present
     but the message is not found in the string/message table.
                (Event String (event log = System) could not be retrieved, error
                0x3ab3)
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   09:37:54
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      950 (C:\Windows\s
    ystem32\taskhost.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   09:42:54
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      5c4 (C:\Windows\s
    ystem32\taskhost.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   09:47:55
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      ee0 (C:\Windows\s
    ystem32\taskhost.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   09:52:56
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      e48 (C:\Windows\s
    ystem32\taskhost.exe).
             A warning event occurred.  EventID: 0xA004001B
                Time Generated: 04/01/2014   09:53:30
                EvtFormatMessage failed, error 15027 the message resource is present
     but the message is not found in the string/message table.
                (Event String (event log = System) could not be retrieved, error
                0x3ab3)
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   09:57:57
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      a20 (C:\Windows\s
    ystem32\taskhost.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   10:02:58
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      1bc (C:\Windows\s
    ystem32\taskhost.exe).
             A warning event occurred.  EventID: 0xA004001B
                Time Generated: 04/01/2014   10:06:04
                EvtFormatMessage failed, error 15027 the message resource is present
     but the message is not found in the string/message table.
                (Event String (event log = System) could not be retrieved, error
                0x3ab3)
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   10:07:58
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      14c (C:\Windows\s
    ystem32\taskhost.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   10:12:59
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      90c (C:\Windows\s
    ystem32\taskhost.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   10:18:00
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      558 (C:\Windows\s
    ystem32\taskhost.exe).
             An error event occurred.  EventID: 0x0000272C
                Time Generated: 04/01/2014   10:23:01
                Event String:
                DCOM was unable to communicate with the computer ca-p01.domain.com
    n using any of the configured protocols; requested by PID      f00 (C:\Windows\s
    ystem32\taskhost.exe).
             A warning event occurred.  EventID: 0xA004001B
                Time Generated: 04/01/2014   10:23:56
                EvtFormatMessage failed, error 15027 the message resource is present
     but the message is not found in the string/message table.
                (Event String (event log = System) could not be retrieved, error
                0x3ab3)
             ......................... dc-p01 failed test SystemLog
          Starting test: VerifyReferences
             ......................... dc-p01 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : mydomain
          Starting test: CheckSDRefDom
             ......................... mydomain passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... mydomain passed test CrossRefValidation
       Running enterprise tests on : domain.comn
          Starting test: LocatorCheck
             ......................... domain.comn passed test LocatorCheck
          Starting test: Intersite
             ......................... domain.comn passed test Intersite
    in Active DIrecotry Sites adn Services when i try to replicate FROM a valid SYSVOL Domain Controller towards my 2012 DC i get this:
    The following error ocurred during the attempt to contact the domain controller dc-p01:
    Directory object not found
    i cannot upload picture yet because Ms ...didn t verified me.

          Starting test: NetLogons
             Unable to connect to the NETLOGON share! (\\dc-p01\netlogon)
             [dc-p01] An net use or LsaPolicy operation failed with error 67,
             The network name cannot be found..
             ......................... dc-p01 failed test NetLogons
          Starting test: ObjectsReplicated
             ......................... dc-p01 passed test ObjectsReplicated
          Starting test: Replications
             REPLICATION-RECEIVED LATENCY WARNING
             dc-p01:  Current time is 2014-04-01 10:25:09.
                DC=ForestDnsZones,DC=mydomain,DC=lan
                   Last replication received from DC-P02 at
              2014-03-31 15:22:40
                DC=DomainDnsZones,DC=mydomain,DC=lan
                   Last replication received from DC-P02 at
              2014-03-31 15:22:40           
    To perform non-authoritative restore of sysvol, you set the Burflag value & system will automatically tries to sync contents of sysvol with its replicating partner DC. Its not mandatory to select any particular DC for sysvol replication becasue in a
    same domain, all DC's shares the same sysvol content.
    Sometime, if initialization of FRS doesn't start, you have to follow the below article. Its also applicable to windows 2008 even as long as your using FRS for replication.
    http://support.microsoft.com/kb/290762/en-us
    To force the replication of sysvol using cmdline, refer below link.
    http://blogs.technet.com/b/justinturner/archive/2007/04/27/quick-tip-force-frs-replication.aspx
    Its better to find out what went wrong with the overall AD domain infra that sysvol has not been able to contact its partner for sysvol replication using depth assessment of the domain. It can be the network,firewall,antivirus or in-built firewall port issues
    which might have broken sysvol replication.
    http://msmvps.com/blogs/ad/archive/2008/06/03/active-directory-health-checks-for-domain-controllers.aspx
    Awinish Vishwakarma - MVP
    My Blog: awinish.wordpress.com
    Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

  • Cluster with shared domain folder using OCFS2 and the domain /tmp folder

    I've setup a cluster with two machines and one managed server on each machine. One of the machines also hosts the admin server.
    Initially, both managed servers were running on the same machine. Everything worked well. When I move to having two machines, I didn't want to have to independently maintain the domain folder on each machine.
    So I decided to setup a shared drive between the machines and use OCFS2 to share the domain folder between the two machines.
    Everything started up fine, but when I deployed software to the server I would frequently (but not always) get this error:
    [wldeploy] Target state: deploy failed on Cluster cluster-01
    [wldeploy] weblogic.management.DeploymentException: [Deployer:149189]Attempt to operate 'deploy' on null BasicDeploymentMBean for deployment mylibrary#[email protected]. Operation can not be performed until server is restarted.
    After looking around a bit on google I saw this issue:
    http://download.oracle.com/docs/cd/E11035_01/wls100/issues/known_resolved.html#CR279281
    which says
    Some OS and NFS combinations result in deployment failures or configuration updates with an exception like:
    weblogic.management.DeploymentException: Attempt to operate 'distribute' on null BasicDeploymentMBean
    Workaround or Solution:
    * Run statd() and lockd() processes on every NFS client that accesses a remote NFS volume.
    * If multiple servers that share the same domain root are started with different user Ids of same group, set the correct "umask" for the server processes so that a file created by one server can be opened for read/write by other servers without security exceptions.
    Unfortunately, I wasn't running NFS, so the workaround didn't help me.
    Through dump luck, I tried this:
    I replaced the domainroot/tmp folder with a symbolic link to a folder on each machine's local filesystem. Following that change my deployments work everytime.
    Does anyone know why this change worked? What is the purpose of the /tmp folder in a domain folder?
    Are there any switches I could turn on to get more information about the exact error that causes the deployment mbean to come back null?

    It may not be the same situation, but I had this "deployer:149189" error and it turned out to be mixing WLS 10.0 and 10.3 installations together in the same install directory and not being scrupulous about environment setup. I think the problem was caused by accidentally running a 10.0 domain with Java 1.6.
    Eoin.

  • Unable to create package shares on distribution points

    For any OSD packages in our environment (like images, driver packages, etc) I always check the option "Copy the content in this package to a package share on distribution points", so that we are able to run content directly from the DP's in a task
    sequence instead of downloading it first to clients. But I've noticed now that for any new package I create, the package shares aren't being created thus my OSD tasks are failing due to missing content. When I check the copy content option for a new driver
    package and monitor the distmgr.log, here is what I see:
    Copying package DEV0007F to the package share location \\hou-sccmdp03.network.local\SMSPKGE$\DEV0007F on the server ["Display=\\hou-sccmdp03.network.local\"]MSWNET:["SMS_SITE=YYC"]\\hou-sccmdp03.network.local\    SMS_DISTRIBUTION_MANAGER  
     4/3/2013 11:02:35 AM    2156 (0x086C)
    SetObjectSecurity failed; 0x80070002    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:02:35 AM    2156 (0x086C)
    SetObjectSecurity failed; 0x80070002    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:02:40 AM    2156 (0x086C)
    SetObjectSecurity failed; 0x80070002    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:02:45 AM    2156 (0x086C)
    SetObjectSecurity failed; 0x80070002    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:02:50 AM    2156 (0x086C)
    SetObjectSecurity failed; 0x80070002    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:02:55 AM    2156 (0x086C)
    Failed to set security on \\hou-sccmdp03.network.local\SMSPKGE$\DEV0007F for package DEV0007F    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:03:00 AM    2156 (0x086C)
    That same sequence of errors is repeated for every distribution point we have. I checked the sharing permissions on the SMSPGKE$ and SMSSIG$ folders on the DP and everything looks correct. I only started noticing this issue after our SP1 upgrade, but I can't
    find anything from Microsoft saying this is a known bug or how to fix it. This is also affecting new distribution points that we created after the SP1 upgrade, so I don't believe going down the remove/reinstall of all the DP's route will work. Any suggestions?

    Copying package DEV0007F to the package share location \\hou-sccmdp03.network.local\SMSPKGE$\DEV0007F on the server ["Display=\\hou-sccmdp03.network.local\"]MSWNET:["SMS_SITE=YYC"]\\hou-sccmdp03.network.local\    SMS_DISTRIBUTION_MANAGER  
     4/3/2013 11:02:35 AM    2156 (0x086C)
    SetObjectSecurity failed; 0x80070002    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:02:35 AM    2156 (0x086C)
    SetObjectSecurity failed; 0x80070002    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:02:40 AM    2156 (0x086C)
    SetObjectSecurity failed; 0x80070002    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:02:45 AM    2156 (0x086C)
    SetObjectSecurity failed; 0x80070002    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:02:50 AM    2156 (0x086C)
    SetObjectSecurity failed; 0x80070002    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:02:55 AM    2156 (0x086C)
    Failed to set security on \\hou-sccmdp03.network.local\SMSPKGE$\DEV0007F for package DEV0007F    SMS_DISTRIBUTION_MANAGER    4/3/2013 11:03:00 AM    2156 (0x086C)
    I've seen similar errors after installing SP1:
    Failed to set share security on share \\DP.domain.tld\SMSSIG$. Error = 5
    Failed to set access security on share SMSSIG$ on server DP.domain.tld
    DPConnection::Disconnect: Revert to self
    Cannot find or create the signature share.
    Solution for that case: Use the computer account instead of a site system installation account:
    That might fix it.
    Torsten Meringer | http://www.mssccmfaq.de

  • Domains Question

    Hello,
    ON SDDM 3.1.0.691 - EA3
    Windows XP SP3
    How can I define a domain in a design and let it remain in the design ?
    I already tried many options but the domain always remains in DefautlDomains.
    What I have to do to create design domains and commit these domains to the svn repository and share this.
    Regards
    Nelson

    Hell Nelson,
    How can I define a domain in a design and let it remain in the design ?Open design, go to domains administration and add domain - there is "Domains File" combo box which allow to select file name or to insert new name - just type file name (without extension) first time and you can select it on next domain. File will be saved in Domains directory under your design directory.
    and commit these domains to the svn repository and share this.You also can share default domains - in preferences you can change location of "system types" directory ( domains, logical types, RDBMS sites and scripts are there) - select versioned directory and you can share them as well
    Regards,
    Philip
    PS I think you use DB2/zOS 8, can you check whether DM 3.1 EA3 works with it. Thanks in advance.

  • DFSR replicaion problem between domain controllers

    I have 2 domain controllers running server 2012 and recently noticed a lot of errors about replication between 2 of them 
    i demoted child controller and promoted it again for DC and issue still occurs
    so far i noticed that when browsing network and looking for shares on main DC i can see SYSVOL folder there 
    but it is missing on the other one - it is present in c \ windows but not visible in shares \
    also domain folder is empty on the child DC 
    when i run dfsrmngr and run the diagnostic it doesn't show errors in status also it says that it is enabled 
    also when trying to manualy create pair of folders to replicate the contents it says at one of the steps it is already used ....what would be the best
    thing to do at this point o have replication issue solved ?
    MAciunio

    C:\Users\Administrator.CON>dfsrdiag dumpadcfg
    LDAP Bind : DC-SERVER2.CON.com
    SitesDn : cn=sites,cn=configuration,dc=CON,dc=com
    ServicesDn : cn=services,cn=configuration,dc=CON,dc=com
    SystemDn : cn=system,DC=CON,DC=com
    DefaultNcDn : DC=CON,DC=com
    ComputersDn : cn=computers,DC=CON,DC=com
    DomainCtlDn : ou=domain controllers,DC=CON,DC=com
    SchemaDn : CN=Schema,CN=Configuration,DC=CON,DC=com
    COMPUTER: DC-SERVER1
    DN : cn=dc-server1,ou=domain controllers,dc=CON,dc=com
    GUID : 3009B7C3-3316-411E-B4ED-ECEF72114C02
    DNS : dc-server1.CON.com
    Server BL : cn=dc-server1,cn=servers,cn=default-first-site-name,cn=sites,c
    n=configuration,dc=CON,dc=com
    Server Ref : (null)
    USN Changed : 586839
    When Created : Saturday, March 15, 2014 9:24:43 PM
    When Changed : Saturday, July 26, 2014 9:16:42 AM
    LOCAL SETTINGS: DFSR-LOCALSETTINGS
    DN : cn=dfsr-localsettings,cn=dc-server1,ou=domain controllers,dc
    =CON,dc=com
    GUID : 3CD85D1B-177B-4CA4-BC15-2B9A87850553
    Version : 1.0.0.0
    USN Changed : 584264
    When Created : Saturday, July 26, 2014 2:15:23 AM
    When Changed : Saturday, July 26, 2014 2:25:26 AM
    SUBSCRIBER: DOMAIN SYSTEM VOLUME
    DN : cn=domain system volume,cn=dfsr-localsettings,cn=dc-server
    1,ou=domain controllers,dc=CON,dc=com
    GUID : 9B8DD38C-26D4-4E78-BC61-6F344C7938B0
    Member Ref : cn=dc-server1,cn=topology,cn=domain system volume,cn=dfsr-
    globalsettings,cn=system,dc=CON,dc=com
    USN Changed : 584238
    When Created : Saturday, July 26, 2014 2:15:23 AM
    When Changed : Saturday, July 26, 2014 2:25:03 AM
    SUBSCRIPTION: SYSVOL SUBSCRIPTION
    DN : cn=sysvol subscription,cn=domain system volume,cn=dfsr-l
    ocalsettings,cn=dc-server1,ou=domain controllers,dc=CON,dc=com
    GUID : 0BC184CA-A02E-40BB-B257-DA32FF86F88A
    ContentSetGuid: 342393C4-C03F-44B1-BE9A-8DFE1F906595
    Root Path : c:\windows\sysvol\domain
    Root Size : (null) (MB)
    Staging Path : c:\windows\sysvol\staging areas\CON.com
    Staging Size : (null) (MB)
    Conflict Path : (null)
    Conflict Size : (null) (MB)
    USN Changed : 591605
    When Created : Saturday, July 26, 2014 2:15:23 AM
    When Changed : Saturday, July 26, 2014 9:41:57 PM
    GLOBAL SETTINGS: DFSR-GLOBALSETTINGS
    DN : cn=dfsr-globalsettings,cn=system,dc=CON,dc=com
    GUID : 5708E418-6D80-45BD-AFC1-9135DEE1211A
    USN Changed : 8313
    When Created : Saturday, March 23, 2013 8:17:18 PM
    When Changed : Sunday, March 9, 2014 5:06:58 AM
    REPLICATION GROUP: DOMAIN SYSTEM VOLUME
    DN : cn=domain system volume,cn=dfsr-globalsettings,cn=system,dc=
    CON,dc=com
    GUID : 31EFC46F-6D74-48FB-BA52-D6750206975B
    Type : 1 (SYSVOL)
    USN Changed : 8314
    When Created : Saturday, March 23, 2013 8:17:19 PM
    When Changed : Sunday, March 9, 2014 5:06:58 AM
    CONTENT: CONTENT
    DN : cn=content,cn=domain system volume,cn=dfsr-globalsettings,
    cn=system,dc=CON,dc=com
    GUID : 0DBFFC24-7793-48B4-B21E-49BAD434B8D6
    USN Changed : 8315
    When Created : Saturday, March 23, 2013 8:17:19 PM
    When Changed : Sunday, March 9, 2014 5:06:58 AM
    CONTENT SET: SYSVOL SHARE
    DN : cn=sysvol share,cn=content,cn=domain system volume,cn=df
    sr-globalsettings,cn=system,dc=CON,dc=com
    GUID : 342393C4-C03F-44B1-BE9A-8DFE1F906595
    File Filter : ~*,*.TMP,*.BAK
    Compression Excl : (null)
    Dir Filter : DO_NOT_REMOVE_NtFrs_PreInstall_Directory,NtFrs_PreExisti
    ng___See_EventLog
    USN Changed : 8316
    When Created : Saturday, March 23, 2013 8:17:19 PM
    When Changed : Sunday, March 9, 2014 5:06:58 AM
    TOPOLOGY: TOPOLOGY
    DN : cn=topology,cn=domain system volume,cn=dfsr-globalsettings
    ,cn=system,dc=CON,dc=com
    GUID : 637AAE04-0A35-43BA-B6A2-1292049A6617
    USN Changed : 8317
    When Created : Saturday, March 23, 2013 8:17:19 PM
    When Changed : Sunday, March 9, 2014 5:06:58 AM
    MEMBER: DC-SERVER1
    DN : cn=dc-server1,cn=topology,cn=domain system volume,cn=dfs
    r-globalsettings,cn=system,dc=CON,dc=com
    GUID : EBCFB268-8F7C-4C90-A49F-1018595A3D2C
    Server Ref : cn=ntds settings,cn=dc-server1,cn=servers,cn=default-fir
    st-site-name,cn=sites,cn=configuration,dc=CON,dc=com
    Computer Ref : cn=dc-server1,ou=domain controllers,dc=CON,dc=com
    Keywords : (null)
    Computer DNS : dc-server1.CON.com
    USN Changed : 584236
    When Created : Saturday, July 26, 2014 2:15:23 AM
    When Changed : Saturday, July 26, 2014 2:25:03 AM
    CXTION: 2452641E-B5E9-4ABD-AA3F-38367137DFD1
    DN : cn=2452641e-b5e9-4abd-aa3f-38367137dfd1,cn=ntds settin
    gs,cn=dc-server1,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration
    ,dc=CON,dc=com
    GUID : 240A03AF-2CD0-4FBC-A56D-16BB90FE585A
    Inbound : true
    Partner DN : cn=dc-server2,cn=topology,cn=domain system volume,cn=d
    fsr-globalsettings,cn=system,dc=CON,dc=com
    USN Changed : 584199
    When Created : Saturday, July 26, 2014 2:19:27 AM
    When Changed : Saturday, July 26, 2014 2:25:02 AM
    CXTION: 2A851034-2EF0-435F-A915-78380D4980EB
    DN : cn=2a851034-2ef0-435f-a915-78380d4980eb,cn=ntds settin
    gs,cn=dc-server2,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration
    ,dc=CON,dc=com
    GUID : A439D7E8-199F-42C3-854E-339559B5382B
    Inbound : false
    Partner DN : cn=dc-server2,cn=topology,cn=domain system volume,cn=d
    fsr-globalsettings,cn=system,dc=CON,dc=com
    USN Changed : 584228
    When Created : Saturday, July 26, 2014 2:10:02 AM
    When Changed : Saturday, July 26, 2014 2:25:02 AM
    MEMBER: DC-SERVER2
    DN : cn=dc-server2,cn=topology,cn=domain system volume,cn=dfs
    r-globalsettings,cn=system,dc=CON,dc=com
    GUID : B8A9BA79-D85E-4DE3-8199-827F356EA9F7
    Server Ref : cn=ntds settings,cn=dc-server2,cn=servers,cn=default-fir
    st-site-name,cn=sites,cn=configuration,dc=CON,dc=com
    Computer Ref : cn=dc-server2,ou=domain controllers,dc=CON,dc=com
    Keywords : (null)
    Computer DNS : dc-server2.CON.com
    USN Changed : 12334
    When Created : Sunday, March 9, 2014 5:10:25 AM
    When Changed : Sunday, March 9, 2014 5:10:25 AM
    Operation Succeeded
    MAciunio

  • Channel for incoming mail addressed to specific domain

    I am trying to create a channel for all incoming messages addressed to a specific domain.
    I know that all incoming Internet mails go to tcp_local first.
    What I want to do is to separate mails for different domains to different channels so I could later process them, either with conversion channel or with some channel filters.
    Also, after passing trough those specific channels, how to put those mails back on track for delivery?
    Can anyone help on doing this?
    Thanks
    I�m running (on Solaris 8) MS5.2p1 hf1.21

    To look over the docs� but I already did, and it�s pretty bad, poorly explained�
    So, please let�s try to make this clear.
    Note, every time after making changes I run:
    imsimta cnbuild
    imsimta restart
    First, you gave an example to me (reply 5):
    [email protected]%tcp_friendly-daemon
    Second, I was not sure from your post where to put space (reply6), and I tested both cases:
    domain.net$E$F [email protected]%tcp_friendly-daemon # space between $F and $U
    and
    domain.net [email protected]%tcp_friendly-daemon # space between domain.net and $E
    Unfortunately, nothing has changed.
    Third, you wrote (reply 7) �No spaces�.
    Forth, I tested that as well and it gave me an error (reply 8).
    Fifth, in your last reply (reply 9) you said that I need a left and a right half, and you suggested an example that I�ve already checked (reply 6) and it wasn�t working :(
    So, now I am completely lost�
    Here is the result of testing this last example in imta.cnf:
    domain.net [email protected]%tcp_friendly-daemon # space between domain.net and $E
    ! tcp_friendly
    tcp_friendly smtp mx single_sys subdirs 20 noreverse maxjobs 7 pool SMTP_POOL mailfromdnsverify maytlsserver allowswitchchannel saslswitchchannel tcp_auth
    tcp_friendly-daemon
    imsimta cnbuild
    imsimta restart
    imsimta test -rewrite -debug [email protected]
    Could you review this result, please and try to see what is wrong.
    Initializing mm_.
    Initializing mm_ submission.
    Checking identifiers.
    *** Debug output from initializing MM for submission:
    13:43:32.79: mmc_winit('l','postmaster@machine_name.test.com','0IB800802GOK8O@machine_name.test.com') called.
    13:43:32.79: Queue area size 5858064, temp area size 5858064
    13:43:32.79: 1464516 blocks of effective free queue space available; setting disk limit accordingly.
    13:43:32.79: Rewriting: Mbox = "postmaster", host = "machine_name.test.com", domain = "$*", literal = "", tag = ""
    13:43:32.79: Rewrite: "$*", position 0, hash table -
    13:43:32.79: Found: "$E$F$U%$H@machine_name.test.com$V$H"
    13:43:32.79: Rewrite failed, not forward.
    13:43:32.79: Rewrite: "$*", position 1, hash table -
    13:43:32.79: Failed.
    13:43:32.79: Rewrite: "$*", position 0, rewrite database -
    13:43:32.79: Failed
    13:43:32.79: Rewriting: Mbox = "postmaster", host = "machine_name", domain = "machine_name.test.com", literal = "", tag = ""
    13:43:32.79: Rewrite: "machine_name.test.com", position 0, hash table -
    13:43:32.79: Found: "$U%$D@machine_name.test.com"
    13:43:32.79: New mailbox: "postmaster".
    13:43:32.79: New host: "machine_name.test.com".
    13:43:32.79: New route: "machine_name.test.com".
    13:43:32.79: New channel system: "machine_name.test.com".
    13:43:32.79: Looking up host "machine_name.test.com".
    13:43:32.79: - found on channel l
    13:43:32.79: Routelocal flag set; scanning for % and !
    13:43:32.79: Rewriting: Mbox = "postmaster", host = "machine_name.test.com", domain = "$*", literal = "", tag = ""
    13:43:32.79: Rewrite: "$*", position 0, hash table -
    13:43:32.79: Found: "$E$F$U%$H@machine_name.test.com$V$H"
    13:43:32.79: Rewrite failed, not forward.
    13:43:32.79: Rewrite: "$*", position 1, hash table -
    13:43:32.79: Failed.
    13:43:32.79: Rewrite: "$*", position 0, rewrite database -
    13:43:32.79: Failed
    13:43:32.79: Rewriting: Mbox = "postmaster", host = "machine_name", domain = "machine_name.test.com", literal = "", tag = ""
    13:43:32.79: Rewrite: "machine_name.test.com", position 0, hash table -
    13:43:32.79: Found: "$U%$D@machine_name.test.com"
    13:43:32.79: New mailbox: "postmaster".
    13:43:32.79: New host: "machine_name.test.com".
    13:43:32.79: New route: "machine_name.test.com".
    13:43:32.79: New channel system: "machine_name.test.com".
    13:43:32.79: Looking up host "machine_name.test.com".
    13:43:32.79: - found on channel l
    13:43:32.79: Routelocal flag set; scanning for % and !
    13:43:32.79: Mapped return address: postmaster@machine_name.test.com
    *** Debug output from rewriting a forward header address:
    13:43:32.79: Rewriting: Mbox = "user", host = "domain.net", domain = "$*", literal = "", tag = ""
    13:43:32.79: Rewrite: "$*", position 0, hash table -
    13:43:32.79: Found: "$E$F$U%$H@machine_name.test.com$V$H"
    13:43:32.79: Rewrite failed, not envelope.
    13:43:32.79: Rewrite: "$*", position 1, hash table -
    13:43:32.80: Failed.
    13:43:32.80: Rewrite: "$*", position 0, rewrite database -
    13:43:32.80: Failed
    13:43:32.80: Rewriting: Mbox = "user", host = "domain", domain = "domain.net", literal = "", tag = ""
    13:43:32.80: Rewrite: "domain.net", position 0, hash table -
    13:43:32.80: Found: "[email protected]%tcp_friendly-daemon"
    13:43:32.80: Rewrite failed, not envelope.
    13:43:32.80: Rewrite: "domain.net", position 1, hash table -
    13:43:32.80: Failed.
    13:43:32.80: Rewrite: "domain.net", position 0, rewrite database -
    13:43:32.80: Failed
    13:43:32.80: Rewriting: Mbox = "user", host = "domain", domain = ".net", literal = "", tag = ""
    13:43:32.80: Rewrite: "*.net", position 0, hash table -
    13:43:32.80: Failed
    13:43:32.80: Rewrite: ".net", position 0, hash table -
    13:43:32.80: Found: "$U%$H$D@TCP-DAEMON"
    13:43:32.80: New mailbox: "user".
    13:43:32.80: New host: "domain.net".
    13:43:32.80: New route: "TCP-DAEMON".
    13:43:32.80: New channel system: "TCP-DAEMON".
    13:43:32.80: Looking up host "TCP-DAEMON".
    13:43:32.80: - found on channel tcp_local
    13:43:32.80: Rewrite rules result: [email protected]
    13:43:32.80: Checking reverse URL cache for: [email protected]
    13:43:32.80: Applying reverse URL pattern ldap:///$V?mail?sub?$Q to: [email protected]
    13:43:32.85: Resulting URL: ldap:///o%3Ddomain.net%2Co%3Disp?mail?sub?(|([email protected])([email protected]))
    13:43:32.85: mmc_open_url called to open ldap:///o%3Ddomain.net%2Co%3Disp?mail?sub?(|([email protected])([email protected])), flags = 256
    13:43:32.85: URL with quotes stripped: ldap:///o%3Ddomain.net%2Co%3Disp?mail?sub?(|([email protected])([email protected]))
    13:43:32.85: LDAP URL identified
    13:43:32.85: URL context #1 will be used
    13:43:32.85: Performing URL search on: ldap:///o%3Ddomain.net%2Co%3Disp?mail?sub?(|([email protected])([email protected]))
    13:43:32.86: mmc_read_url result: [email protected]
    13:43:32.86: URL resolution returned: [email protected]
    forward channel = l
    channel description =
    channel user filter =
    dest channel filter =
    source channel filter =
    channel flags #0 = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
    channel flags #1 = NOSMTP DEFAULT
    channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
    channel flags #3 = LOGGING NOGREY NORESTRICTED RETAINSECURITYMULTIPARTS
    channel flags #4 = EIGHTBIT NOHEADERTRIM NOHEADERREAD RULES
    channel flags #5 =
    channel flags #6 = LOCALUSER REPORTHEADER
    channel flags #7 = NOSWITCHCHANNEL NOREMOTEHOST DATEFOUR DAYOFWEEK
    channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
    channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
    defaulthost = test.com test.com
    linelength = 1023
    channel env addr type = SOURCEROUTE
    channel hdr addr type = SOURCEROUTE
    channel official host = machine_name.test.com
    channel queue 0 name = LOCAL_POOL
    channel queue 1 name = LOCAL_POOL
    channel queue 2 name = LOCAL_POOL
    channel queue 3 name = LOCAL_POOL
    channel after params =
    channel user name =
    urgentnotices = 1 2 4 7
    normalnotices = 1 2 4 7
    nonurgentnotices = 1 2 4 7
    channel rightslist ids =
    local behavior flags = %x7
    backward channel = tcp_local
    header To: address = [email protected]
    header From: address = [email protected]
    envelope To: address = [email protected] (route (machine_name.test.com,machine_name.test.com)) (host domain.net)
    envelope From: address = [email protected]
    name =
    mbox = user
    Extracted address action list:
    [email protected]
    Extracted 733 address action list:
    [email protected]
    Address list expansion:
    user%domain.net@ims-ms-daemon
    1 expansion total.
    *** Debug output from submitting an envelope address:
    13:43:32.88: mmc_wadr(0x0018a888,'[email protected]','[email protected]') called.
    13:43:32.88: Copy estimate before address addition is 1
    13:43:32.88: Parsing address [email protected]
    13:43:32.88: Rewriting: Mbox = "user", host = "domain.net", domain = "$*", literal = "", tag = ""
    13:43:32.88: Rewrite: "$*", position 0, hash table -
    13:43:32.88: Found: "$E$F$U%$H@machine_name.test.com$V$H"
    13:43:32.88: Match, pattern = "domain.net", current = "(*domaincheck*)"
    13:43:32.88: old state = not checked.
    13:43:32.88: Using result 1 from domain match cache.
    13:43:32.88: new state = succeeded.
    13:43:32.88: New mailbox: "user".
    13:43:32.88: New host: "domain.net".
    13:43:32.88: New route: "machine_name.test.com".
    13:43:32.88: New channel system: "machine_name.test.com".
    13:43:32.88: Looking up host "machine_name.test.com".
    13:43:32.88: - found on channel l
    13:43:32.88: Routelocal flag set; scanning for % and !
    13:43:32.88: Address [email protected] requires local processing.
    13:43:32.88: Variant #1 = [email protected]
    13:43:32.89: Variant #2 = *@domain.net
    13:43:32.89: Checking for [email protected] in the system alias file
    13:43:32.89: - not found
    13:43:32.89: Checking for *@domain.net in the system alias file
    13:43:32.89: - not found
    13:43:32.89: Checking [email protected] with URL template ldap:///$V?*?sub?$R
    13:43:32.89: LDAP URL template identified
    13:43:32.89: URL determined to be: ldap:///o%3Ddomain.net%2Co%3Disp?*?sub?(|([email protected])([email protected])([email protected]))
    13:43:32.89: URL context #1 will be used
    13:43:32.89: Using cached LDAP result for URL info: ldap:///$V?*?sub?$R|[email protected]|[email protected]
    13:43:32.89: Scanning LDAP result.
    13:43:32.89: Attribute: objectclass
    13:43:32.89: Attribute index: 0
    13:43:32.89: Attribute: inetuserstatus
    13:43:32.89: Attribute index: 1
    13:43:32.89: Attribute: mailuserstatus
    13:43:32.89: Attribute index: 2
    13:43:32.89: Attribute: uid
    13:43:32.89: Attribute index: 4
    13:43:32.89: Attribute: mail
    13:43:32.89: Attribute index: 5
    13:43:32.89: Attribute: mailhost
    13:43:32.89: Attribute index: 9
    13:43:32.89: Attribute: mailDeliveryOption
    13:43:32.89: Attribute index: 18
    13:43:32.89: Attribute: preferredLanguage
    13:43:32.89: Attribute index: 42
    13:43:32.89: Scanning complete, begin actions
    13:43:32.89: Object class: top
    13:43:32.89: Object class didn't match
    13:43:32.89: Object class: person
    13:43:32.89: Object class didn't match
    13:43:32.89: Object class: organizationalPerson
    13:43:32.89: Object class didn't match
    13:43:32.89: Object class: inetOrgPerson
    13:43:32.89: Object class didn't match
    13:43:32.89: Object class: inetUser
    13:43:32.89: Object class didn't match
    13:43:32.89: Object class: ipUser
    13:43:32.89: Object class didn't match
    13:43:32.89: Object class: nsManagedPerson
    13:43:32.89: Object class didn't match
    13:43:32.89: Object class: userPresenceProfile
    13:43:32.89: Object class didn't match
    13:43:32.89: Object class: inetMailUser
    13:43:32.89: Object class match, reference value 1
    13:43:32.89: Object class: inetLocalMailRecipient
    13:43:32.89: Object class match, reference value 18
    13:43:32.89: User/group index = 1
    13:43:32.89: Domain is active
    13:43:32.89: Mail domain is active
    13:43:32.89: User status = active
    13:43:32.89: Mail user status = active
    13:43:32.89: User UID user found.
    13:43:32.89: Processing mailhost attribute machine_name.test.com
    13:43:32.89: Mailhost references local system
    13:43:32.89: Delivery option: mailbox
    13:43:32.89: Delivery options value: 1
    13:43:32.89: No reprocess flag on user, processing now
    13:43:32.89: Status for this address = 1
    13:43:32.89: - URL match for [email protected]
    13:43:32.89: Delivery option template: $M%$\$2I$_+$2S@ims-ms-daemon
    13:43:32.89: - user%domain.net@ims-ms-daemon
    13:43:32.89: Parsing address user%domain.net@ims-ms-daemon
    13:43:32.90: Rewriting: Mbox = "user%domain.net", host = "ims-ms-daemon", domain = "$*", literal = "", tag = ""
    13:43:32.90: Rewrite: "$*", position 0, hash table -
    13:43:32.90: Found: "$E$F$U%$H@machine_name.test.com$V$H"
    13:43:32.90: Match, pattern = "ims-ms-daemon", current = "(*domaincheck*)"
    13:43:32.90: old state = not checked.
    13:43:32.90: Using result 0 from domain match cache.
    13:43:32.90: new state = fail pending.
    13:43:32.90: Rewrite failed due to channel mismatch.
    13:43:32.90: Rewrite: "$*", position 1, hash table -
    13:43:32.90: Failed.
    13:43:32.90: Rewrite: "$*", position 0, rewrite database -
    13:43:32.90: Failed
    13:43:32.90: Rewriting: Mbox = "user%domain.net", host = "ims-ms-daemon", domain = "ims-ms-daemon", literal = "", tag = ""
    13:43:32.90: Rewrite: "ims-ms-daemon", position 0, hash table -
    13:43:32.90: Failed.
    13:43:32.90: Rewrite: "ims-ms-daemon", position 0, rewrite database -
    13:43:32.90: Failed
    13:43:32.90: Looking up host "ims-ms-daemon".
    13:43:32.90: - found on channel ims-ms
    13:43:32.90: - orig_send_access mapping check: l|postmaster@machine_name.test.com|l|[email protected]
    13:43:32.90: - passed.
    13:43:32.90: - send_access mapping check: l|postmaster@machine_name.test.com|ims-ms|user%domain.net@ims-ms-daemon
    13:43:32.90: - passed.
    13:43:32.90: - adding address user%domain.net@ims-ms-daemon to channel ims-ms
    13:43:32.90: - adding address [email protected] to headers.
    13:43:32.90: Copy estimate after address addition is 2
    Expanded address:
    [email protected]
    Submitted address list:
    ims-ms
    user%domain.net@ims-ms-daemon (orig [email protected], inter [email protected], host ims-ms-daemon) NOTIFY-FAILURES NOTIFY-DELAYS
    Submitted notifications list:

  • IIS in DMZ - files in domain DFS

    Hello!
    We have domain DFS share, which contains files that we need distribute to Internet via http.
    For this we planning to install IIS server in DMZ.
    Is it enough on IIS DMZ in Physical Path specify \\domain\share and domain account that have read permissions on share?
    Thank's!

    Hi,
    I assume the purpose is to create a shared folder on internet - If DMZ is already set, it is fine to have Read permission on share if you just would like to give user Read - Only permission. 
    Secure method to transfer file to DMZ and back
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/d970aec7-b564-41d5-baeb-71c1399e9059/secure-method-to-transfer-file-to-dmz-and-back
    If you have any feedback on our support, please send to [email protected]

  • Administrative Shares Access

    So I came to the realization that a local administrator not joined to the domain can see Administrative Shares on domain computers. Is there anyway to lock this down? I just realized someone could fire up a VM and be an administrator on that VM and then
    access servers using administrative shares. Is this normal behavior? 
    Thanks!

    Hi,
    As “Administrative shares” are defined all the default network shares that can be accessed remotely only from network administrators.
    But you can update them via the following article:
    Configure a Network Share Item
    http://technet.microsoft.com/en-us/library/cc732793.aspx
    Alex Zhao
    TechNet Community Support

Maybe you are looking for

  • How to configure some of VMX file configurations / VM Configuration Parameters via vCloudDirector REST API

    Hi We need to configure some settings for VM using vCloudDirector REST API other wise which can be down in 2 following ways. 1. On VCenter -> select VM  ( in Power Off Mode ) -> Edit Settings -> Options -> Advanced -> General -> Configuration Paramet

  • White Screen on Satellite A665-S6086

    I bought this laptop about a year ago.  About a month ago, the laptop screen started turning white for no reason, randomly. It could be in the middle of the laptop being used or at boot. Does anyone know what problem this is? Is this the driver, or t

  • Using Composite keys in Entity Beans

    Hi, I am trying to develop a test application with two entity beans, (1) OrderBean (key is a string called order_no) and (2) LineBean (key is order_no and an integer line_no) using CMP 2.0. Relationship between OrderBean to LineBean is 1 to many. I c

  • How do I display the contents of a URL as a portlet, and pass params to it?

    I'd like to be able to overcome some of the limitations of the OmniPortlet and Dynamic Page Portlet by being able to display the HTML output of a Servlet. I need to be able to pass parameters to this servlet as well. What can I do to achieve this goa

  • Mail Died

    Everything was going fine until last night. If I open mail it closes after a few seconds and shows a report. This sounded like some of the other questions on here until I tried some of the ideas. None of them worked. I tried to disable the junk mail