Share another user to my 'tab/saved report'

Hi,
I created an interactive report. I changed it and saved this (via save report). So now there is a new tab.
I enter apex via the E-business suite. Is it possible to share another user to my ‘tab/saved report‘?
Because when another user in apex wants to use this report he cant use/see my ‘tab/saved report‘.
Thnx, Robbert

Hello Robbert,
See [this blog post|http://dpeake.blogspot.com/2009/01/preserving-user-saved-interactive.html] about saving and sharing IR's - your question is answered in point 3.
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

Similar Messages

"The file [name of file] may have been changed by another user since you last saved it." Issue affects both network and local files.

When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it." She can choose to save as another file or overwrite with her changes.
This just started happening a week or so ago. She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message. It happens on
most files, but not all – both network and local.
We already tried the QFE_Saskatchewan registry fix. I also checked the file server for Services for Macintosh.

You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

How can I screen share another users desktop on the _same_ macbook?

Hi,
I'm trying to login multi-user into my own Macbook.
What I mean is, on my macbook start a session logged in as another user on my own macbook.
Using JollysfastVNC I can do this, but its terribly slow, like unusable slow. Tried changing the color depth and everything.
I tried both Mac and VNC authentication and VNC usally gets so slow it freezes, and Mac is very slow and unusable.
How can I fix this?
Running Lion on Mid-2009 Macbook Pro

Your graphics driver's dialog repositioning option? Check that.
Mylenium

Saving report per user

Hi All,
I have developed an interactive report. There is a save option, but when I click on that it says "This report will be saved for all users" How can I make the report save per user?
-Vatsa

1. Yes that user will need an account that way there is a unique user id associated with the IR report parameters.
2. The reason it is says that is because you picked save as default report for all users. That is the report everyone will initially see. After you have created a login for the user, log in as that user. Then modify the IR as needed. Lastly click the gear and then click save report. there will be a dropdown to choose to save as a named report. Choose that and then the report will be saved onto a second tab viewable ONLY BY THAT USER.
Please let me know if you need anymore help.
-Ghoulies

Way to allow the user access to the saved lists of this Z report

We have a Z report that we want to run at midnight each Sunday and then view the output/layout first thing Monday morning. We can schedule the report to run but it appears that the only way we can save the output as a 'file' for later viewing is by using the "Save with ID" option, which puts the output into a SAP 'saved list'.
The problem with this is that it doesn't appear to be possible to access that list from the Z-report - it would appear that you have to go into SQ01 and use the 'saved list' button. This means giving the Z- report user access to SQ01 as well as Z-report, which, for security (SOD) reasons we don't want to do.
We can run the report in foreground with the output option "File store" and save the output as a file to a specified location,. But this option doesn't appear to be available when the report is scheduled as a background job. If this is done, the background job runs but there's no output anywhere, as far as we can tell.
So what want is to run the report in background but with the output option 'File store' or equivalent (i.e. an output stored somewhere that the report user can view). Is this not possible, or have we missed something in setting up the report run?
Or is there a way to allow the user access to the saved lists of this Z report without giving them T-code SQ01?
Thanks

Hi !
I just wonder if the answer from Varishtb below did solve your propblem.
I have exactly the same problem as you. I also want to be able to look at the saved list without using the sq01.
If you solved it I will be grateful to get the solution.
regards Lars
answer:
You can call the infoset query directly from a transaction code. There's
no need to copy it as a 'Z-report' (or as a custom report). In fact,
everytime you're copying an infoset query to a report, you're calling
for problems the next time you face an upgrade. (That is because SAP
changes the internal logic used to handle the infosets queries from
version to version)
We're using some infoset queries and they work fine this way.

ALV report - copy layout to another user

Hello,
I have a question about ALV reports.
In ALV we have option to select layout and save it by user-specific.
How to copy this layout to another user?
Is there some function/Bapi?
Thanks in advance,
Michal

Hi Michael,
Here are the steps I documented for managing this procedure:
First Step is to READ the Layout into the Program
     The parameters for the layout can be found in table LTDX
Goto SE37 and enter: LT_DBDATA_READ_FROM_LTDX
When (READ) you will input information for the following parameters:
Report Name
Handle
Log Group
User
Variant
Type
An example is shown below:
<screen shots didn't load in my response> email if you'd like the document with screen shots>
Execute.
Now our next step is to WRITE the information from the program into table: LTDX
While at the Function Builder Screen enter the new function module: LT_DBDATA_WRITE_TO_LTDX
When you (WRITE) you will input information for the following parameters:
Report Name
Handle
Log Group
User
Variant
Type
When completed, your input screen for (WRITE) should look like the screen below:
<screen shots didn't load in my response> email if you'd like the document with screen shots>
IMPORTANT     When entering information for IS_VARKEY, remember to use the u201Cnew useru201D ID
When entering information for IS_VARIANT, remember to enter information exactly as found in table LTDX and remember that the parameter: DEPENDVARS may be needed to complete your entry
Now Execute the Function Module. When completed go to table: LTDX and confirm that your new entry has been added.
Pre Checklist:
1.)     Capture entries (users) you want to copy from table: LTDX
2.)     Make sure you have access to execute function modules/eCATT scripts
3.)     Make sure you have table display access (needed to find and validate updates)
If you'd like the documentation with screen shots please reply with your email address.
Cheers,
Robert

Hello and HELP! Over the years I have saved Invoices in my Documents. I have just tried to open them and all I am getting is " cannot be opened, Invoice**** is used by another user, do you want to make a copy?" That's on all my invoices.

Can someone help please.
I have just "lost" ( cannot open) all my saved Invoices in the Document folder. All I am getting is " cannot open, Invoice ** is used bey another user, do you want to make copy? " That doesn't work either. I can't get anything on the time capsule either. How can I reset to an earlier time? Or what can I do?
Thank you

Did you recently reinstall the OS then copy all your files back over? Do a Get info on one of the documents and see if your current UserName is listed and has Read & Write permissions. If not select the Documents folder and check that for Read & Write permissions for your UserName. If it doesn't have R & W permissions Add it so it does.

How can I share my iTunes library with another user on my laptop?

How can I share my itunes library with another user on my laptop?

If you type "Shore itunes library" into the search bar at the top of this page by "Support" you will find:
iTunes: How to share music between different accounts on a single computer

How do I move organized photos from dropbox to iPhoto and share with another user on the same mac?

I have about 3,500 photos sitting in dropbox and just purchased my first mac yesterday. My husband and I each have our own Ipad and our own user id's on the mac. I moved two of the folders to Iphoto and it shows up on my screen in the right folders. However, on my Ipad, it shows all of them under one Photostream and not organized. They don't show up on my husband's "side of the computer" at all.
So my questions are:
1. How does one mirror their file organization on the Ipad?
2. How does one share all of the folders with another user on the same Ipad so they can view folders, and add pictures to the folders if they like?
Thanks!

1. How does one mirror their file organization on the Ipad?
If you use the Photo Stream, the organisation in iPhoto will be lost - there is just one endless stream. YOu could sync your photos using iTunes. Then you will see the synced albums in the Photos.app on the iPad.
See this link: iOS and iPod: Syncing photos using iTunes
How does one share all of the folders with another user on the same Ipad so they can view folders, and add pictures to the folders if they like?
On the same iPad? Do you mean on the same mac?
If you want to share an iPhoto library between two users on the same mac, the iPhoto library should be on a separate disk partition or even better, on a separate external disk. Then you can set the flag "Ignore ownership on this volume" to avoid permission problems. Both of you will be able to browse the iPhoto library and can edit the photos within.
See this support document: iPhoto: Sharing libraries among multiple users
If both of you want to keep separate iPhoto libraries but share the photos, you could share selected albums as Shared PhotoStreams and invite each other to browse them. This would require iOS 7. Do you have iOS 7 on your iPad? Each Shared Photo Stream will be shown as a separate album on your iPad .
iCloud: Using and troubleshooting Shared Photo Streams
Regards
Léonie

How do I share the Photo Library on my desktop with another User. I have Apoerture set up on my wife's user account but cannot figure out how to access the photo library from her desktop.

I just got a new IMac. I transferred all the photos from our old PC to the Aperture Library on my User account. My wife is set up as another User. She can access Aperture from her User account but there are no photos in the Library. How can I share or giver her access to the photos so that she can work with them on Aperture from her User account?

Move the Aperture library to separate disk or disk partition with plenty of space for all your photos. On a separate disk or partition it will be possible to set the "Ignore ownership on this volume" flag. Then two users can write to the same Aperture library without permission problems.
The procedure is describe here for iPhoto libraries, but this will work for Aperture libraries as well:
iPhoto: Sharing libraries among multiple users
If you want to use a drive for your Aperture library, that has been used with a PC, format it for Mac, before you move the Aperture library there. This can be done with Disk Utility.

How do I share iTunes access privileges with another user on my mac?

My wife and I use the same Mac. I recently created a separate user account for her after upgrading to Mountain Lion (so that we can get full functionality out of the new features). I gave her user account full administrator access as well as read & write sharing ability in certain folders... So why can she not purchase content on iTunes? What is the best way to extend the same iTunes account across different users on the same Mac?

I found the answer on the Quicken Support site. Unbelievable!!!!
Article ID: GEN82981 Updated: 8/11/2011 |
Unable to Share a Data File Between Multiple Users on the Same System
Cause The Quicken Essentials data is a data package that contains multiple files. Each item in the package has permission set based on the current users profile. When the Package is moved to a shared folder, the permission in the data package are not changed, therefore cannot be accessed by another user.
You can change the permissions for each individual file within the data package to be accessed by other users. However, the first user who opens the file after the permissions have been changed, will take ownership of the data package, and it will no longer be accessible by the other party again.
SolutionThis issue is currently a product limitation and is expected to be resolved in a future version of Quicken Essentials for Mac.

HT3819 how do i share my music with another user on one computer?

How do i share my itunes library with another user on my same computer?

Hi there,
You may find the article below helpful.
iTunes: How to share music between different accounts on a single computer
http://support.apple.com/kb/ht1203
-Griff W.

How do I share my music with another user account on my MAC?

I wish to share some of my music with another user on my MAC. I created a playlist of the music I wish to share. I enabled home sharing and selected share selected playlists. I went to the users account and could not find the shared playlist. Within iTunes, I went to music, add to library.

Hi there,
You may find the article below helpful.
iTunes: How to share music between different accounts on a single computer
http://support.apple.com/kb/ht1203
-Griff W.

Save As window comes up when saving a WebI document another user modified

When trying to save a Web Intelligence document in the "Web" mode (not the java "Rich Internet Application" mode), users get a "Save As" window if another user was the last one to save the document. The user can simply select the same location and "overwrite" the existing report. They can also use the Rich Internet Application mode instead, since this does not have the same issue. After that, the same user can continue to save the report as usual, until another user saves it. The user has full control permissions to the document and to the folder.
This doesn't seem like it would be a big deal, but most of our users access reports using hyperlinks from other websites, which opens the document directly in the web mode; and they just make simple changes like selecting a different value in an input control. If the Save As window comes up, it takes them to their Favorites folder, and they usually don't know which public folder the report is stored in.

I can not print anything from Firefox but on IE everything prints just fine. I happen to like Firefox a whole lot better so would appreciate a solution to my problem.

IPhoto is currently a shared file with another user on my Mac and I am the Admin and no longer want to share it. How do i undo this completely?

Iphoto is currently a shared file on my Mac and I no longer want to share it. How do I completely remove access to it if i am the Admin to the computer? Thanks in advance...

I found the answer on the Quicken Support site. Unbelievable!!!!
Article ID: GEN82981 Updated: 8/11/2011 |
Unable to Share a Data File Between Multiple Users on the Same System
Cause The Quicken Essentials data is a data package that contains multiple files. Each item in the package has permission set based on the current users profile. When the Package is moved to a shared folder, the permission in the data package are not changed, therefore cannot be accessed by another user.
You can change the permissions for each individual file within the data package to be accessed by other users. However, the first user who opens the file after the permissions have been changed, will take ownership of the data package, and it will no longer be accessible by the other party again.
SolutionThis issue is currently a product limitation and is expected to be resolved in a future version of Quicken Essentials for Mac.

Share another user to my 'tab/saved report'

Similar Messages

Maybe you are looking for