Share contents disappear

All,
Here's my setup:
Windows 2008 AD
Windows 2008 File Cluster
Mac OS X 10.5.5 client bound to AD with Apple AD-plugin
I have my client successfully bound to the AD domain for authentication and network home directories. I also have force local home set. Almost everything is working perfectly. The network home mounts correctly at login with no problem. AD authentication works flawlessly and the local home is created as it should be.
Here's the problem: when I open the network home and remove all the files and folders then any subsequently created files or folders are written to the directory, but they immediately disappear from Finder view or access. If I logout and log back in then the Mac can see everything until I remove all the files or folders again.
When I look at the directory on the Windows file cluster I can see the files and folders I created, so I know that the write permissions are correct.
Any help would be appreciated.
Thanks,
Andy Fore

great sharing tool I recommend.
I installed ifmw on my droid and it works well.
share contents on my phone , no need to upload.
It should be great to share photos with my friends when I travel on.
Thanks for your information.

Similar Messages

Flex 3 project, all visible content disappears

This is a bit hard to describe. It's a complex Flex app for a realtime multiplayer game using socket connections. Previously, everything worked fine, but after some recent changes there is a point where all visible content disappears.
What is REALLY odd is that this ONLY happens when the SWF is embedded in an HTML page. If the SWF is loaded directly by the browser, either locally using file:/// or served by a webserver (i.e. http://localhost:8080/swfs/MySwf.swf) then the SWF works as expected and transitions to the next state without a problem.
Also of note is that no error is thrown and, yes, I have the debug version of flash installed and can see popup errors by intentionally causing them to test.
I'm at a loss for how to debug this. I started by commenting out all sections of the code that had recently changed, but the problem persisted. Since then, I'm shooting in the dark, commenting out sections and testing. For a bit, I thought the problem might be with the embed code itself, but I'm using the default generated by Flex Builder and it has not changed in the past 10 months that the last version of this SWF was working. I've tried using every alternate window mode, but that didn't change anything.
I've been testing mainly in Safari 4 (OS X), but tried Firefox 3.5 to confirm that the problem wasn't mac-browser specific, and tried Firefox 3 (Ubuntu) to confirm it wasn't OS specific.
Does anybody know, on a high level, what could cause this kind of problem? Specifically...
1) What can cause the display to suddenly clear?
2) What differences are there between running the SWF directly (even loaded from a webserver, so it's not local content) that could affect rendering?
3) Any other advice on things to try?
Attached are two images:
(a) the one with content elements is the desired effect, and was the result of loading the swf directly, and
(b) the one with just the plain background image is the result at the same step but embedded in an HTML page
Thanks!

Thanks for the suggestion Barna. I've been doing that, though, and discovered that the code continues to run in the background, not having hit any error. I literally had logging statements between every line of code in the function where the content disappears, and every logging statement was output as it should be.
So, I tried executing a different function that does nothing but change the current state instead, and the problem still occurred.
The keys points thus far are:
(1) no error messages thrown
(2) no errors in the AS3 code
(3) but a call to currentState = "lobby" (which is the next desired state) causes the contents of the display to vanish
(4) again, only happens when embedded
If there is an error, it seems to be in the state change... which is MXML, so I can't log output there, but I'll see if commenting out particular element(s) or changes will shed some light on where an error might be...

Authorized versus Associated.....trying to share content

What is the difference between a computer being AUTHORIZED to play content from an iTunes account versus a computer being ASSOCIATED with a device so it can be synced and play the content? It seems multiple computers can be AUTHORIZED to play content from multiple iTunes account but each device can only be ASSOCIATED with one iTunes account (or is it one computer) at a time. Is that correct?
If so, can all the AUTHORIZED content on a computer (even if from multiple iTunes accounts) be synced to one ASSOCIATED iPad?
I have a Work Computer (PC), Associated Work iPad and Work iTunes Account and a separate Home Computer (iMac), Associated Home iPad and Home iTunes account. I am trying to figure out how to share content? Currently all my content is in my Home iTunes Account / Computer. My Work iPad, Work iTunes Account are both new and I want to share some of my Home iTunes content on my Work iPad.
I am concerned when I read that once a device is ASSOCIATED with an iTunes account it can not be ASSOCIATED with a different account for 90 days. I can't risk ASSOCIATING my Work iPad with my Personal iTunes Account and being locked out from syncing my Work iTunes account on my Work iPad for 90 days.

Okay, I figured it out myself and will document it here so others may benefit.
A computer can be AUTHORIZED to play/use content purchsed from multiple iTunes Accounts. There is a limit to the number of computers that can be AUTHORIZED per account (5 total) but no limit as to how many accounts a computer can be AUTHORIZED to play. Once you have AUTHORIZED all the accounts AND downloaded all the purchased content from each account to a computer, this content can be also be played on any device ASSOCIATED with the computer. A device can only be ASSOCIATED to one computer but one computer can have many devices ASSOCIATED to it. As an example, you can use apps purchased on from multiple iTunes accounts on an iPad as long as the computer the iPad is ASSOCIATED with is AUTHORIZED to use/play the content for each of the accounts. Another example: if you also purchased music from all the iTunes accounts, you could listen to it on an iPad, iPhone and iPod as long as all three were ASSOCIATED with the computer where all the accounts were AUTHORIZED.
Hope this helps.

How do i share content with my family without becoming responsible for payment of everybody's purchases? with familysharing i mean, not home sharing

how do i share content with my family without becoming responsible for payment of everybody's purchases?
with familysharing i mean, not home sharing
i have set up a familyshare for my parents and 3 siblings, all mid twenties. everybody is used to paying their own way. how do i make that continue to be the case and still keep the sharing facility open?
e.g I don't want to pay for my sisters' music purchases - half of it i don't like - but would like access to it now and then.

-> Home Sharing is different than logging into the iTunes store.
You enable Home Sharing using one AppleID. Doesn't matter which you use but all devices must use the same AppleID for Home Sharing.

The share button disappeared from my Facebook add-on just before I upgraded to Firefox 5.0. I thought by upgrading and reinstalling the add-on it might come back, but it didn't. All other FB buttons are there, near as I can tell. Any ideas? I'm using XP3.

The share button disappeared from my Facebook add-on just before I upgraded to Firefox 5.0. I thought that maybe by upgrading and reinstalling the add-on it might come back, but it didn't. All the other FB buttons are there, near as I can tell. Any ideas? I'm still using XP3.

Hello,
I had the same problem with finding this file.
There's no such file in Mac OS X version of Skype. But there's a directory for your Skype user account in /Users/%current_user_name%/Library/Application Support/Skype/
try:
quitting Skype
renaming old folder
signing into the Skype

Page content disappears in Edit mode - Custom Master Page

Hi All,
Below are the two issues I have with my master page.
1) I am facing the strange issue with the pages created using custom page layouts and custom master page.
In browse mode, everything looks perfect and as expected. But when I try to edit the same page, all content disappears as soon as page ribbon appears. When I click back on Browse tab on the ribbon, everything appears back normally.
2) Also When I apply my custom master page as site master for Publishing site it works I can see all my custom design and layout. But when I apply same for team sites, unless I change system master to my custom master page, it doesn't reflect my design.
Does anyone face this issue before?
Thanks
Pramod
Pramod

Once in edit mode, are you able to view the page's source and do a "Find" on a certain keyword that should normally appear in your page's content? Is it there?
I'm trying to determine if its a server side issue with your master page's code that's causing the content not to be sent back across the wire to the user or if the content is there but just not properly presented. Thanks
Nikolas Charlebois-Laprade Microsoft Certified Professional & Software Engineer http://nikcharlebois.com

Content disappears once Lifetime (Time-Based Publishing) is enabled

We have transported KM content from our Dev KM to our QA KM. We noticed that the Lifetime setting of the folder was not transported, so we enabled it on the folder in QA. Once the lifetime is enabled in QA, the content disappears from the iView display. On our Dev KM, it is working correctly.
We checked the content and each has Valid-to and Valid-from fields set the same as it is in Dev. They should be displaying as they do in Dev.
The transport was done first using online ICE. When that did not work we did it again using offline ICE, transporting a .zip file from Dev to QA.
Any ideas as to what might be happening?
Both QA and Dev are EP 7.0 SPS 11.

Hi,
If you transported the KM files with ICE, then the Application-Defined Properties
such as Valid From and Valid Until for time-dependent publishing are not transported due to limitations in ICE transport.
Check this for more:
http://help.sap.com/saphelp_nw70/helpdata/EN/e2/61701deb253242bea2ebeafa190e83/frameset.htm
Hope this helps.
Regards,
Praveen Gudapati

AdvancedDataGrid content disappearing when setting rendererProviders..

Hi All,
Thanks for the community support, really useful.
I am using the SDK 4.1.
Here is the explanation of my problem.I am using a detail renderer inside a ADG, which appears when clicking on a certain column.
This is done is AS3 (I mean not with mxlm tags), using the ADG rendererProviders property with an item renderer passed to a ClassFactory.
This is working ok, until a certain point..
Indeed, the grid contains many columns, with images item renderers and when I am horizontally scrolling through the column, a display bug make all the ADG content disappear.. Headers remain but all the data are gone. A user action that may update the data has to be done to make the data come back of course.
This bug seems to be known by a few, but unfortunately all the solutions are useless in my case (setting the property horizontalScrollPolicy = 'auto' for each column for instance).
After some research it appears that the line responsible for making the whole thing vanishing is the update of the variable rendererProviders:
ie this.rendererProviders.push(_detailRendererProvider);
In the AdvancedDataGrid.as class, the property setter, after updating its value of course make 2 other intructions :
invalidateSize();
invalidateDisplayList();
It seems this is a bit too much for the DG to handle (note that I call this.validateNow(); after the rendererProviders update in my code).
Note as well that if I do not set :
this.variableRowHeight = true;
An error pops up from the class AdvancedDataGridBaseEx in the configureScrollBars method, doing :
var headerPosX:int = lastHeaderInfo.headerItem.x;
(headerItem is null)
So, end of the day, I am stuck..
Many thanks for your help, hoping it will arouse some lights..
Benjamin

hi, katrina S
I don't know how but for the past three days iTunes has been functioning correctly.
I removed al my music files from the library and put them back to their original folder; reinstalled iTunes and let it go from there. I've decided not to copy my music folder to iTunes as it's now working "correctly." I haven't made any playlists or made any online purchases since reinstalling as I'm wary of it all going haywire again. Thanks for your help. I'll keep you updated on this matter.
take care,
az

My share widget disappear

hi! My share widget disappear from the Notifications as well. I can't find where to turn it on? What to do?

Oops.. I have iOS 6.1.3

Share contents between smartphones without uploading it

What can you do if you want to share a private contents on your phone with one who is far from you?
You may :
1. send it by email.
2. upload it to SNS, or any else?
But both of them imply to upload the contents on your phone to external server.
If you use an app named as "iFMW", you can share a private contents on your phone with someone you like without uploading them.
Only thing you do is to select the contents and pick a user to be received.
iFMW supports multiplatform(Android2.1, Android2.2, and also SymbianOS) and multilanguage(English, Spanish, German, French, Russian, Japanese, Chinese)

great sharing tool I recommend.
I installed ifmw on my droid and it works well.
share contents on my phone , no need to upload.
It should be great to share photos with my friends when I travel on.
Thanks for your information.

Creating Page Layout Problem : Page Content Disappears

Hello,
I am a recent grad and new to the world of Sharepoint and ASP.
I created a Page Layout with 3 columns and I implemented the 'Page Content' in each column.
When I enter anything ( Text or HTML) in the Page Content and save, it immediately discards what I entered and saved.
What am I doing wrong?
Thanks in advance.

Hi,
According to your post, my understanding is that Page Content Disappears after you save the created Page Layout.
The issues is caused by that Page Layout is not assocaited with the content type.
Please make sure you create Page Layout correctly. You can refer to:
How to: Create a page layout in SharePoint 2013
Here is a similar thread for you to take a look at:
http://islamkhattab.blogspot.in/2013/04/publishing-page-layout-image-field.html#!/2013/04/publishing-page-layout-image-field.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Flash content disappears - HELP

I have just gotten back to working on my XP machine and flash
content disappears after about 1 to 2 seconds. Even on the
Macromedia home page, the entire top of their page shows up and
goes away. I have read about the xp sp2 problems and I did recently
upgrade. I have read the fixes about there (i.e. pop up blocking
level, puting  in
the htm file...none of this works. Firefox works fine, IE doesn't.
When I publish with preview in the Flash IDE - no luck either.
Do my problems sound like they are related to XP sp2? If any
one out there has seen this type of behavior and has
suggests...many thanks in advance.
- Richard

I found the problem...it was my firewall software...it was
blocking popup ads...
Thanks....

In system preferences, under extensions, cannot select mail, iMessage, airdrop as extensions to use to share content

I cannot select mail, messages, or airdrop as an extension to use to share content (i.e.: to share a website), they are greyed out in my share menu, in the Extensions folder of system preferences

The screenshot shows nothing abnormal.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I can't download music from my library to my ipod because it says only 5 accounts are allowed to share content. How do I get around this?

I can't download music from my library to my ipod because it says only 5 accounts are allowed to share content. How do I get around this?

Or how do I change the 5 devices. Some are not used anymore

Content disappearing from Apple TV

I am running the latest version of iTunes on my MacBook Pro and syncing this with Apple TV (also fully updated). I have noticed that purchased content disappears from the Apple TV, and in some cases, from the MacBook. For example, I have purchase a season of Stargate Atlantis, downloaded and successfully synced, but then the following day episodes 3 and 5 will be missing from iTunes and Apple TV. They still exist in the backup (within the music library under "TV Shows," but what gives? Why so buggy? Thanks in advance for any comments!!

Well nothing should ever disappear from iTunes, but for the AppleTV. Syncing doesn't really mean all content will always be there. It will sync, Movies, then TV, Music, then Photos in that order. If more spaces is needed for lets say a Movie, it will pull off photos, music, then TV shows in that priority order. The AppleTV I believe is going to try to save room on itself never knowing when you may download a rental or new content from the online store via the AppleTV. It will sync back content if there is room, if not then it will leave it on your computer and then stream when needed. Synced content just allows for faster access and access when computer is not on.

Share contents disappear

Similar Messages

Maybe you are looking for