Share entire volume only for system user

I'd like to set up a sharepoint for the entire boot volume of my server, but make it only visible to the system administrator.  I have other dirs on the same volume which are currently setup as sharepoints for certain groups of users.  Can I do this (share the boot volume) and make it visible only to the system admin while maintaining the subdirs for groups?

At least for me on 10.6, I can loging to the server over AFP, using my credentials from my local admin account on the server.  When using those credentials, I can see all the volumes on the server (root level).  I have the same access as if I were sitting at the server.  I can't navigate down into folders that are owned by other users (a user's home folder contents), but then again, I can't do that when sitting at the server either (without using sudo).

Similar Messages

  • Make UDF Read-only for all users

    Hi
    Can i use any script to make a UDF read-only for all users?
    i am looking at CPRF and CUFD Tables
    thanks

    Hi,
    You should never try updating system table directly.  That will against supporting policy by SAP.
    Thanks,
    Gordon

  • Need to give REVOKE CLOSE option in CO02 only for selective users

    Hello,
    Need to Restrict Revoke Close Option in Tcode CO02 (Under Functions - Restrict Processing - Revoke Close) through Role/Object Level.  Can any one suggest how to control this .    Need to give access for CO02 for 5 Users , but only 2 Users can able to do Revoke Close Option , other 3 Users should not able to do this activity.
    BR,
    Murali

    There is no authorization object as B_USERSTAT_T , but there is a authorization object as B_USERSTAT . I tried to create a Temporary Role and manually assigned this Object .  In this object there is no way to control REVOKE Close option . 
    But there is one way noted in Google to restrict Revoke Close option .
    1.Goto BS22
    2.Select the system status TEC0 (I0045) & just duble click it,
    3.Maintain the Revoke technical completion (BUTA) =Forbidd (not allowed),
    But if i set the above Parameter ,  this will restrict Revoke Option for all the users .  I need to control ONLY for selective users .  I can set some value in user data for those users  , based on that i can write some coding to restrict , but i want to know where to write this code ....  I tried in some area , but it never works.
    Can any one give some idea to fix this issue.
    BR,
    Murali

  • Latest update 3.3 only for lion users? total mess

    apple did a major step to indicate that aperture is no app for "pro"users. If it should be that it should support not only the latest system version!
    latest update 3.3 only for lion users? total mess.
    I will look for another solution. Sad.

    Hi,
    I was wondering if somebody could give me some guidance please?
    I bought an N73 in September after much research and a lot of deliberating, I decided to purchase one (via O2 in England) even though i had heard lots of unhappy people claiming the phone had ruined their life etc due to its software faults.
    I haven't updated my phone yet since buying it mainly due to being put off by the number of NEW problems the updates can cause.
    I dont have any major problems with my phone, its got a bit slower with time and the camera isnt very quick when uploading and sometimes switches off (but i think its to do with the slide mechanism on the back), anyway i would be grateful if you would give me your honest opinion as to whether i should upgrade to the latest firmware or not!
    Many Thanks
    Richie

  • [solved[X superlaggy after hd went out of space, but only for one user

    So the netbook (eeepc 1101ha) went out of diskspace while running and froze. I freed up some space and restarted X, but it failed so I rebooted. Same story then. It either loads and becomes super slow or doesn't load at all. I use dwm wm which to my knowledge doesn't save to config files that might have been corrupted during the moment with no diskspace. Other wms have same problems too, but only for that user.
    Here are some lines from /var/log/Xorg.0.log/
    [ 3068.496] (**) Power Button: always reports core events
    [ 3068.496] (**) Power Button: Device: "/dev/input/event4"
    [ 3068.507] (II) Power Button: Found keys
    [ 3068.507] (II) Power Button: Configuring as keyboard
    [ 3068.507] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 3068.507] (**) Option "xkb_rules" "evdev"
    [ 3068.507] (**) Option "xkb_model" "evdev"
    [ 3068.507] (**) Option "xkb_layout" "us"
    [ 3068.683] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 3068.683] (II) No input driver/identifier specified (ignoring)
    [ 3068.684] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 3068.684] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 3068.684] (**) Sleep Button: always reports core events
    [ 3068.684] (**) Sleep Button: Device: "/dev/input/event3"
    [ 3068.697] (II) Sleep Button: Found keys
    [ 3068.697] (II) Sleep Button: Configuring as keyboard
    [ 3068.697] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 3068.697] (**) Option "xkb_rules" "evdev"
    [ 3068.697] (**) Option "xkb_model" "evdev"
    [ 3068.697] (**) Option "xkb_layout" "us"
    [ 3068.700] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 3068.700] (II) No input driver/identifier specified (ignoring)
    [ 3068.709] (II) config/udev: Adding input device USB2.0 UVC 1.3M WebCam (/dev/input/event7)
    [ 3068.709] (**) USB2.0 UVC 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
    [ 3068.709] (**) USB2.0 UVC 1.3M WebCam: always reports core events
    [ 3068.709] (**) USB2.0 UVC 1.3M WebCam: Device: "/dev/input/event7"
    [ 3068.730] (II) USB2.0 UVC 1.3M WebCam: Found keys
    [ 3068.730] (II) USB2.0 UVC 1.3M WebCam: Configuring as keyboard
    [ 3068.730] (II) XINPUT: Adding extended input device "USB2.0 UVC 1.3M WebCam" (type: KEYBOARD)
    [ 3068.730] (**) Option "xkb_rules" "evdev"
    [ 3068.730] (**) Option "xkb_model" "evdev"
    [ 3068.731] (**) Option "xkb_layout" "us"
    [ 3068.742] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5)
    [ 3068.742] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 3068.742] (**) Eee PC WMI hotkeys: always reports core events
    [ 3068.742] (**) Eee PC WMI hotkeys: Device: "/dev/input/event5"
    [ 3068.750] (II) Eee PC WMI hotkeys: Found keys
    [ 3068.750] (II) Eee PC WMI hotkeys: Configuring as keyboard
    [ 3068.750] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
    [ 3068.750] (**) Option "xkb_rules" "evdev"
    [ 3068.751] (**) Option "xkb_model" "evdev"
    [ 3068.751] (**) Option "xkb_layout" "us"
    [ 3068.752] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 3068.753] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 3068.753] (**) AT Translated Set 2 keyboard: always reports core events
    [ 3068.753] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 3068.773] (II) AT Translated Set 2 keyboard: Found keys
    [ 3068.774] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 3068.774] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 3068.774] (**) Option "xkb_rules" "evdev"
    [ 3068.774] (**) Option "xkb_model" "evdev"
    [ 3068.774] (**) Option "xkb_layout" "us"
    [ 3068.775] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
    [ 3068.775] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 3068.775] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 3068.775] (II) LoadModule: "synaptics"
    [ 3068.776] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 3068.776] (II) Module synaptics: vendor="X.Org Foundation"
    [ 3068.776] compiled for 1.8.0.902, module version = 1.2.2
    [ 3068.776] Module class: X.Org XInput Driver
    [ 3068.776] ABI class: X.Org XInput driver, version 9.0
    [ 3068.777] (II) Synaptics touchpad driver version 1.2.2
    [ 3068.777] (**) Option "Device" "/dev/input/event6"
    [ 3068.823] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    [ 3068.824] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    [ 3068.824] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 3068.824] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    [ 3068.824] (II) SynPS/2 Synaptics TouchPad: buttons: left right
    [ 3068.824] (**) Option "TapButton1" "1"
    [ 3068.824] (**) Option "TapButton2" "2"
    [ 3068.824] (**) Option "TapButton3" "3"
    [ 3068.863] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 3068.864] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 3068.880] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    [ 3068.880] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 3068.880] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 3068.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 3068.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 3068.913] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 3068.914] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 3068.914] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 3068.914] (II) Synaptics touchpad driver version 1.2.2
    [ 3069.383] SynPS/2 Synaptics TouchPad no synaptics event device found
    [ 3069.384] (**) Option "Device" "/dev/input/mouse0"
    [ 3069.397] (**) Option "TapButton1" "1"
    [ 3069.397] (**) Option "TapButton2" "2"
    [ 3069.397] (**) Option "TapButton3" "3"
    [ 3069.417] Query no Synaptics: 6003C8
    [ 3069.417] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
    [ 3069.418] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
    [ 3069.430] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
    [ 3069.430] (II) UnloadModule: "synaptics"
    [ 3069.431] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    [ 3069.431] (II) No input driver/identifier specified (ignoring)
    Any ideas?
    Last edited by idjut (2010-07-13 00:43:04)

    R00KIE wrote:
    I'm not familiar with DWM but I would look inside ~/.local ~/.config and ~/.cache , maybe something is stored there.
    If that doesn't work you may try moving all the hidden stuff to a backup folder and start the X session again.
    Something must be causing that and most probably it's some dot file stashed away inside one of those dot directories (you say new users work just fine so it's not a system problem).
    Apart from this I'm out of ideas, once I had XFCE (I know its not the same) act really strange and the problem was related with some corrupted saved session file, once I deleted it everything was fine again.
    Didn't work! Any other tips, ideas?

  • Change E-mail for system user BWREMOTE

    Dear All,
    How can i change the E-mail for system user BWREMOTE, i tried in SU01 email field is empty in communication tab, checked in BW and ECC no details were maintained. Currently this user is able to send emails, would like to change the email address to this user.
    Thanks,
    Kartik

    Hi Kartik
    For this you have to maintain the list of process and email note faction when process chain failed in transaction code RSPCM in BW system
    and also you can refer the SDN inks
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304c3146-8eb9-2d10-d787-b6dc2d368cb2?QuickLink=index&…
    BR
    SS

  • When I try to play a dvd Macbook Pro I get  a box with the message,This function is only for activated users. To activate go to Preferences and Donate" That took me to Mr. Gecko"s Facebook page wanting me to donate $1.99! Does any one know what this is? H

    When I try to play a dvd on my Macbook Pro I get a box with the message " This is only for activated users. To activate go to preferences,donate" this takes me to Mr. Gecko's facebook page asking me to donate $1.99-$4.99.
    Any clues on what this is, and/or how to bypass it? If I can report this to someone? Thanks

    Sure sounds like malware, unles you installed something from a questionable site, then it's still malware but in a payware form as playing DVDs is free on Mac's.
    Unless the DVD has software on it perhaps?
    Does this work on any movie DVD or is this a special kind of DVD with software on it from someplace?

  • Edit password rules only for BCC user

    Hi all,
    our customer has requested some changes on the password rules only for BCC users.
    So, i should change the follow component:
    /atg/userprofiling/passwordchecker/PasswordMinLengthRule
    /atg/userprofiling/passwordchecker/PasswordMixedCaseRule
    /atg/userprofiling/passwordchecker/PasswordMustIncludeNumberRule
    /atg/userprofiling/passwordchecker/PasswordMustIncludeSymbolRule
    /atg/userprofiling/passwordchecker/InternalPasswordMustNotIncludeLogin
    /atg/userprofiling/passwordchecker/InternalPasswordNotInPreviousNRule
    But the component password rules above, should be changed only for the BCC users. How can i do this?
    Edited by: user7618461 on 30-set-2011 3.45

    Hi Christoph,
    in your Identity Store, you can use LDAP Server as authentification method (Tab Workflow). You need an attribute which contains the DN of the users and fill out port and host of your directory. That means that the PW can remain in the AD. Just try it, haven't used this possibility yet. You could also use Kerberos via AD instead. These scenarios don't cover your requirement that some might be without an AD account (which is not that common).
    Otherwise it's getting difficult again to get all passwords at once from your AD. You have to decrypt the passwords without a key...  AD could store a lower encrypted password for NT4, which makes this a bit easier, but still "unesthetic". You get these hashes via SSL and not with the common initial load jobs.
    The PW-Hook gets the passwords before they are set. That's why you could store and ecrypt the new passwords in the Identity Store and wait for 1 or 2 months till everyone had to change their password (if you use this policy).
    Best regards,
    Nils
    Edited by: Nils Sibold on Jul 18, 2008 3:10 PM

  • On-Demand Process Running only for authenticated user

    I have noticed that an on-demand process is running only for authenticated users - for example a download of a document. For public users it doesn't. I remember seeing a similar question related to ajax on demand in this forum but couldn't locate the thread. Does anyone knows why the process is not running for not authenticated user? The result of a download for a public user is a blank page where the authenticated user gets the file by clicking on the same link.
    Thanks in advance,
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

    Hello Denes,
    Please check if the following can help you -
    Re: AJAX on public page
    Re: Calling an application level on-demand process from JavaScript
    Regards,
    Arie.

  • I want to install an app but only for one user on my imac with Lion

    I have 2 users on my mac. I would like to install some apps (iwork) but only for one user and not the other user. How can I do this?

    Setup of iWork in your wife's account should only occur the once.
    Updates can be performed through your account and are usually performed via Software Update.
    Messages should not be popping up in your wife's account if all the iWork updates have been performed.
    Go to Software Update and download and install all the iWork updates.
    Unless you keep OSX up-to-date, messages will continue to come up when your wife logs into her account.

  • HOW create support message ONLY for KEY USER

    Hi all,
    I just configured my service desk and I wanted to give only the key users the permission to create support messages. But every user have the rights to create a message from the satellite system.
    How can I prevent that? Is it possible to hide the option in the menu bar (help - create message) for non-key-users? The key users have the role SAP_SV_FDB_NOTIF_BC_CREATE . non sap users have just standard roles for hr, ...
    Thanks in advance!

    hi,
    in the documentation it is written
    Create messages from satellite systems with Help ® Create Support Message
    SAP_SOL_SERVTRANS_CREATE
    Authorization object S_RFC,
    profile S_RFC_VERS with the activity Execute for the object SAPSMO*
    this is working fine
    see link http://help.sap.com/saphelp_sm310/helpdata/en/71/50548566324a7491916585fe73a2b4/content.htm
    best regards Xavier

  • Catalog items visible to everyone, purchaseable only for some users

    Hello everybody
    Me again trying to find a solution to the following problem:
    We need to have some items in our catalog that are visible for every user but only purchaseable via shopping cart / SRM for some authorized users. I couldn't find any possibility in the customizing. So my attempt would be to add an additional attribute in CCM where I can put some kind of flag and then to construct an authorization check based on that flag and on a authorization profile. In case the authorization check fails, the catalog item may not be put in the shopping cart. Preferabily the shopping cart icon should be disabled for such items.
    Did somebody out there already think about something similar or already implemented something like that?
    It would also be a good basis for offering a publicly viewable, browseable catalog for "window shopping", because I also didn't find a way until now to publish the catalog as a standalone web application without shopping cart functionality.
    What do you out there think about it?
    Kind regards,
    Renaud

    Hi Christophe
    Thanks a bunch for your great help! I could solved the problem and am now able to have some catalog items visible but only purchaseable for authorized users. This is what I've done:
    1. Create a new authorization class (SU21)
    2. Create a new authorization object within this class
    3. Create a new authorization field within this object
    Don't forget to save and quit the SU21 transaction and then reenter it (/nsu21) because only then you'll see your changes / additions... seems to be a "refresh-bug" in SU21.
    4. Create a new role (PFCG) and an authorization profile containing the new authorization object. Assign the values needed.
    5. Create a new attribute in CCM and assigned it to OCI cust_field5 (because this one is of type TEXT50)
    6. Implemented some code in BAdI BBP_CATALOG_TRANSFER:
    DATA: wa_et_sc_item_data  TYPE BBP_PDS_SC_ITEM_D.
    DATA: wa_catalog_content  TYPE BBP_WS_OCI_ITEM_S.
    DATA: lv_authorized       TYPE c.
    DATA: lt_limtab           TYPE TABLE OF string.
    DATA: wa_limtab(10)       TYPE C.
    DATA: lv_message_v1       LIKE SY-MSGV1.
    DATA: lv_message_v2       LIKE SY-MSGV2.
    DATA: lv_message_v3       LIKE SY-MSGV3.
    DATA: lv_message_v4       LIKE SY-MSGV4.
    LOOP AT et_sc_item_data INTO wa_et_sc_item_data.
    * Get corresponding line from transferred catalog data
      READ TABLE catalog_content INTO wa_catalog_content
                                 WITH KEY line = wa_et_sc_item_data-number_int
                                 BINARY SEARCH.
      IF sy-subrc = 0.
    *   If field content for checking authority against is not empty...
        IF NOT wa_catalog_content-cust_field5 IS INITIAL.
    *     Perform authority check
          AUTHORITY-CHECK OBJECT '<your auth.object here>'
                          ID     '<your auth.field here>'
                          FIELD  wa_tab.
          IF sy-subrc <> 0.
            MOVE wa_catalog_content-cust_field5  TO lv_message_v1.
            MOVE wa_et_sc_item_data-ordered_prod TO lv_message_v2.
    *       Eliminate leading zeroes from product number
            WHILE lv_message_v2+0(1) = '0'.
              SHIFT lv_message_v2.
            ENDWHILE.
    *       Output message
            MESSAGE ID     'ZXXX'
                    TYPE   'W'
                    NUMBER '000'
                    WITH   lv_message_v1
                           lv_message_v2.
    *       Remove item from SC
            DELETE et_sc_item_data.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDLOOP.
    Interesting observation is, that when issueing the message with type = 'I' it does not condense the message text. With type = 'W' it does...
    I also found out the reason, why the way via ET_SC_MESSAGES will not work: SAP <b>has hard coded</b> somewhere after the BAdI call the message id and message number... so no way to bypass this without a modification.
    Kind regards,
    Renaud

  • Outlook asking for username and password, but only for some users

    Hello, I'm
    in an Exchange Server 2013 client
    environment, two CAS servers
    and two Mailbox.
    Some users are having trouble in Outlook 2007
    and 2012, which is directly
    requesting the user name and password, not all,
    just some.
    The Active Directory is ok,
    DNS and also own Exchange
    servers apparently do not see errors.
    Has anyone here ever experienced this?
    How can I solve this problem?
    As this happens only to some users
    and the vast majority have no problems, so
    difficult to find the cause.
    Thank you!
    Ivanildo Teixeira Galvão

    Hi Ivanildo,
    From your description, only some users have an issue that Outlook prompts for username and password. In your case, I recommend you compare the normal and problematic Outlook settings. Here is the Outlook settings in my environment for your reference:
    1. "Always prompt for logon credentials" isn't checked.
    2. Logon network security using Negotiate Authentication.
    3. "Connect to Microsoft Exchange using HTTP" is checked.
    4. Use the NTLM Authentication when connecting to my proxy server for Exchange.
    Hope this can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • Infopath form data coming only for published user

    Hello,
    I have published one web browser based infopath form all the data is coming only for me ,but when other user opened that form with his/her loginid all fields are blank.Why is it so? Any help
    Thanks,

    Hi,
    According to your description, my understanding is that the form data cannot be displayed when other users accessed the form.
    As Hemendra suggested, please check if there are any rules in the form to display the data to specified users.
    To match a user with the current login user, then we can set the filter with AccountId inside the Login Account group to equal userName() to get the corresponding employee id.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Company logo not displayed in preview only for few users

    Hi to all.
    i inserted a company logo in a sapscript with se78 transaction. The most of user are able to preview and print the document with the logo.
    Few users ado not see the logo both in preview and in printing. I checked the su53 for these users and it seems that their buffers are not update. I don't know how to solve. Could someone help me ?
    Thanks in advance.Regards

    Hi,
    Check this things first.
    1. Your logo check on which client may be at dev client it's working but at other cllient it's not working for that u have to transport logo from dev client to other client.
    2. What the format of your form because size can be littlebite change printer wise.
    3. Check the size of window in which u declare logo or granphic window.
    4. Check the upper window or side window of graphic window.
    Rewards points if it is useful.

Maybe you are looking for

  • Can I set an mx control property globaly for all instances of the control.

    Is there a way of setting the value of a variable on a control for all instances of the control in the application?  For example, I have several instances of an mx:Label and I want to change the enabled property for all instances at once rather than

  • Help Center is running extremely slow in OSX Lion.

    Help Center is running extremely slow on my MacBook Pro with OSX Lion (8 GB RAM, 2.4 Ghz Intel Core i5). It takes several seconds to start up, occasionally variable names like "[currentBookname]" are displayed instead of section headings, results upd

  • How to Reduce Image Size and show upload Progress Bar

    i need to capture an image from the camera and send it to the server. however to reduce the amount of data transmitted i want to shrink the image and lower its resolution. I have code that currently does the following : UIImage *testImage = [UIImage

  • What does having to make these same two hue/saturation adjustments mean?

    I keep having to make the same two yellow adjustments in Lightroom. No matter the subject matter, indoor or outdoor. And no matter the camera body. See the before and after screenshots: Before: The puppy coats are too yellow (to me), even after eyedr

  • Extended BASIS Configuration- DASHBOARD

    Hi, I want to simplify the BASIS job like monitoring DB / OS / System. I am impressed with SQL server DASHBOARD . Is there any option in SAP to do like that of any third party software can do that. Here i am pointing out some of my ideas. Dear expert