"Share Error: Quicktime 0" error message in FCP - any ideas why?
Getting an error that states "Share Error: Quicktime 0" when using the share function to write to blu-ray. Of course, this comes at about 3 hours into a four hour encode, and of course everything is lost after this completely useless message. I've got the most recent version of QT, all the updates have been added, etc.
I burned one BD and one BD on DVD with no problems, and nothings changed. I've gotten this error twice in a row now, and rendering for three hours just to get this is beyond annoying.
See if anything here helps: iPod not recognized correctly on Toshiba laptop
Similar Messages
-
Visual glitches in exported QuickTime movie (but not in FCP); any ideas?
We shot a short film with a Sony camera (standard def), but it apparently isn't compatible w/ FC Studio software. So we captured and did a rough-cut on my friend's PC rig (Adobe Premiere Pro), burned raw files of our rough cut on to dvd's, then transferred from those discs to my rig. The codec of this footage worked fine in FCP, but wasn't supported by Color. So I used Compressor to convert all referenced files to Apple ProRes 422 (HQ), as it seemed the best conversion I tried (no loss of film quality) and obviously now is supported by Color.
However, the final rendered QuickTime movie (exported from FCP) had some odd visual glitches that occur right before the end of a clip (perhaps 10-15 frames before the end): it's like the brightness or gamma level suddenly drops a noticeable amount right at the end of a clip (again, ~10-15 frames). I couldn't say for sure if it's the last 10-15 frames that are appropriate and the REST of the clip is what's out of whack.
Initially, I thought it was a problem with Color (as these were Color-corrected sequences I was exporting). But I just tried it with a non-color corrected sequence, and the errors are still there.
Any ideas what's going on? Any suggestions/solutions? Did I pick an inappropriate conversion on Compressor?I think this may be an AVI conversion glitch.
Well I am guessing that from Premiere Pro they came out as AVI? If that is the case well the best thing to do would be to open it with Quicktime Pro and export it as DV/DVCPRO NTSC .MOV
From there you should be able to bring it into FCP without a hitch and then put color down,
But in order to save time I would try first exporting just that last little segment again throwing it into Compressor and see if it comes out okay. It may be that on capture there was some dropped frames on the end so double check that last little bit. -
Any idea why I can't purchase stuff off either iTunes or AppStore? I am getting a message saying unknown error has occurred immediately I enter my password.
Brett,
Well done getting the wireless network secured.
You have to precede the (hex) password with a '$' in Mac OS, to tell the Internet Connect dialog box that you are keying a hex password (rather than ASCII). This is because the Mac has detected that the network is WEP protected, and leaves it to you to decide how you want to key the password.
As an alternative, in Internet Connect (or from the AirPort icon menu), you can elect to join an "Other" network. If you select your network again, it'll come up with "WEP Password" as the option of Wireless Security. You can change this to "WEP 40/128-bit hex" and then not have to precede your password with the '$'.
Alternatively, you could tell us the make and model of your wireless router and we can tell you how to set, and use an ASCII password. From your 10-character hex password, we can see that you're using 40/64-bit WEP. Non-Apple routers can be a bit fussy when using ASCII passwords with 40-bit WEP (don't worry, this is also true for Windows PC's using 40-bit WEP too), but we can talk you through it.
As a final alternative, as you have such a whizzy Mac, as long as your wireless router supports it, you could use WPA security, and never have to worry about ASCII / hex / '$', etc. Older Macs (particularly original AirPort cards - not AirPort Extreme - and OS9) were limited to 40-bit WEP. -
When trying to view youtube I get this message"an error occured loading this content" any ideas why?
When I try to view YouTube content I get the message "an error occured loading this content." This did not happen until recently. Any ideas why?
Hi,
I'm facing the same issue.. Just updated the software a few days back and I started getting this error... logged into youtube can view the playlists, subscriptions etc but when I try playing any video or Rent a movie etc...the message kept popping up... "Error Loading Content, Try again later"....
Arrrgggh.....
Can someone help us with this... -
Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?
Resolve iOS update and restore errors
-
My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many thanks.
Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy -
My iTunes suddenly stopped working. I uninstalled it and reinstalled it twice. It gives me an Error message 7 or windows error message 126. Any ideas of why this is happening?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
when I try to export a photo to my desktop I get the followiing error message "Export Versions Complete with Errors" any ideas why?
Have you tried to export different images as a test to see if it is related to the one you are getting the error on? Also try to export to a different folder other then the Desktop, again to see if the problem is connected to that folder.
Another thing to do is run the Aperture Library First Aid on the library. Hold the option and command keys down while you start Aperture. First run the Permission Repair and see if that helps. If not quit Aperture and restart and run the Library Repair and try.
Post back if you still have problems
regards -
HT1386 I am getting an error message that syncing failed to start. Any ideas why?
I am getting an error message that syncing failed to start. Any ideas why. The ipad is working fine.
Then I tried to download and install them again but it kept saying the old itunes could not be removed.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
i keep trying to download the Photoshop free trial on my windows xp but an error message that says "You are running an operating system that Photoshop no longer supports" pops up, any idea why?
Because Photoshop CC requires Windows 7 or above...
See the System Requirements. -
Nokia 822 error unable to reboot message to press any key to shut phone down.
Windows Phone error unable to reboot message to press any key to shut phone down. No screen available to press, help.
Thats definitely not good, respond. We are here to help get your phone working again. Have you tried a forced reboot by chance? Please hold down the Power keys for about 10 seconds. Do you recall anything that may have been processing when this occurred? Any new updates prior?
-
After updating to iTunes 5, I got an error message said the iPhone cannot be used because the Apple Moble Device service is not started. Any idea why and how to fix this? Thanks!
Please follow this article:
http://support.apple.com/kb/TS1567
it should help
let me know -
My upgrade to IOS5 for iphone 4 continually times out with error message 3259. Any ideas on why?
My download of ios5 continually times out in itunes, quoting error message 3259. Any ideas why
THIS WAS COPIED FROM A THREAD THAT WORKED FOR ME SO I CAN'T TAKE THE CREDIT
Open notepad as administrator, and direct yourself to:
C:\Windows\System32\Drivers\etc
open the "Hosts" file:
note the "127.0.0.1 gs.apple.com" portion near the bottom. your hosts may be different, and if so, then look for that part specifically. the problem for me, lied within the fact that just before the "127.0.0.1 gs.apple.com" part, there originally was no hash(#) with the space like the rest of the hosts file. This was all I had to fix. After editing and then SAVING the hosts file in notepad I restarted iTunes and the update went through without a hitch!
so if you do not see the hash and space before the "127.0.0.1 gs.apple.com" part, all you have to do is put the #, and then press tab! I hope this works for some of you guys! So just to be clear, that particular line in the file should look like:
# 127.0.0.1 gs.apple.com
good luck! -
I am getting, "an unexpected error occurred" during set up of a 3rd airport express. Any ideas why or how to correct?
Are you using the IMac in your profile, or are you using the iPhone or iPad to set up the Express?
If you are using the iMac, what operating system is installed on the Mac? -
Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THXahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering.
Maybe you are looking for
-
How to remove duplicate friends from games in game center lists
In one of my Games it lists multiple duplications of friends for that specific game. How do you delete these extra "listings" for these people. I dont really want have to delete them altogether and go through the process of reinviting.
-
I wanted to change the name of a Time Capsule and also the partition on it. I successfully changed the name of the base using Airport Utility (easy). However, I cannot figure out how to change the partition name. I used the mv function in Terminal
-
Running out of memory on startup disk
Hello! Today I opened up iTunes and my phone started syncing. I got a message telling me (I think, but this is close) that my start up disk in almost full? I am very new to MACbooks so I am wondering if I am storing things in the wrong place. I ha
-
Extinction of MobileMe Galleries...any way to NOT move them to Aperture?
As with many (former) mobileMe users, I've received the usual automated warnings about the end of mobileMe services and already prepared for the transition by making alternative arrangements for sharing pictures. My master images, as well as the spec
-
Process chain activation : 0 c hains were selected
Hi all I have scheduled process chains in production. Because one of the metachain is showing error while loading infopackage,in the production I have created a new infopackage and added it to the chian.Then activated the metachain. But when i was tr