Share external hard drive between PowerBook (PPC) and MacBook (Intel)?

Hello.
I recently purchased an HP Portable USB 3.0/2.0 1TB external hard drive (http://j.mp/f9FP4M). I'm trying to figure out the best way to format it so that my girlfriend and I can both use it. Problem is, I have a PPC-based PowerBook G4, and she has an Intel-based MacBook. Hopeless?
If not, here is the ideal scenario:
--One partition that can boot Tiger (I still have the CD).
--A second partition that can boot Snow Leopard (just got it for my girlfriend).
--A third partition where my girlfriend can back up her MacBook using Time Machine.
--A fourth partition where I can back up my PowerBook using whatever means possible/necessary.
Can someone please suggest how I might do this? I would be very grateful for any assistance.
If any part of my ideal scenario has to be sacrificed -- I would not be at all surprised -- then let's forget about my PowerBook and focus on how to format the drive for her MacBook. I presume I would just need to do GUID, but I'd still need guidance on how to create partitions to boot Snow Leopard (and Tiger, if that would still be possible).
Happy to clarify any of the above if it's unclear or incomplete. Thanks for reading and for thinking this through with me!

Question was resolved here:
http://discussions.apple.com/thread.jspa?threadID=2803825&tstart=0

Similar Messages

  • Share External Hard Drive between Mac and PC

    I have over 200Gb of HD wedding videos I captured with FCE to an external hard drive. I would like to mail the hard drive to the groom but he uses a PC.
    Any ideas on how I can make this work so he can view the clips?
    I know I can format the external hard drive to FAT 32 but that will take me forever to transfer over.
    Is there an easier way?

    He will also not be able to view the codec in which your material is written. You would need to convert everything to files using something like H.264.
    If he installed Mac Drive 7 on his computer he could read a Mac formatted drive, but that wouldn't solve the codec issue.

  • HT201250 How do you add an external Hard drive to time machine and share on network?

    How do you add an external Hard drive to time capsule and share it on local network?
    Lee

    Ensure it's formatted as Mac OS Extended, FAT16, or FAT32, connect it to a self-powered hub, and plug it into the Time Capsule's USB port. If the drive is Ethernet and not USB, ignore everything else and just plug it in.
    (71787)

  • Sharing an external hard drive between two macs

    Could someone please give me step-by-step instructions on how I can share an external hard drive between my powerpc(running 10.4.11) and my macbook air(running 10.5.6)? I would like to do this with out any external software.

    Anthony1900 wrote:
    Could someone please give me step-by-step instructions on how I can share an external hard drive between my powerpc(running 10.4.11) and my macbook air(running 10.5.6)? I would like to do this with out any external software.
    Simply connect the drive to one of the two computers and there you are!
    Use your network and turn on file sharing. It's that simple.

  • One Format External Hard Drive for Your Mac and PC...

    I have Formatted my External HD Passport 500GB = (465.8) and split it in two partition Mac OS Extended (Journal = 232GB) and FAT32 (Ms-Dos-FAT = 232GB) and reformat to NTFS using Windows...
    How to use one External HUD for your Mac and PC you have a PC and how to have two Partition in Mac OS Extended (Journal) and FAT (Ms-Dos-FAT)as you desire the size of your partition under application, Utilities and Disk Utility and covert the (FAT32) to (NTFS)using Windows Control Panel or just search by Start, search Computer Management or just right my Computer and format the second partition to (NTFS)
    Tips for Mac OS Extended (Journaled) FAT32 vs NTFS, what works and don't work...
    (1)Mac OS Extended (Journaled) Partition can't be use in Windows to transfer files but NTFS Partition can be use in Mac by transferring file from Windows to Mac and NTFS support for files over 4G in size...
    (2)FAT32 can be use in Mac and Windows but with a limitation that a file cannot be transferred to a FAT32 partition if the file is larger than 4GB such as a video file and FAT32 file system performs more slowly than NTFS...
    (2)Mac OS Extended (Journaled) can be use in Windows when you Reformat your HD to HFS+ by third-party app such as http://www.macdrive.com/ MacDrive for $50.or http://www.paragon-software.com/home/ntfs-mac/ NTFS For Mac 6.0 for $30...
    Reference link 1 External Hard Drive for Your Mac and PC...
    http://www.myfirstmac.com/index.php/mac/articles/1-external-hard-drive-for-your- mac-and-pc
    Best regards...
    JamesUFOs...
    http://www.youtube.com/user/JamesEBEs

    I have many external drives I use between my MacBook Pro and my Windows PC's. I use a free NTFS driver for Mac OS-X to give me full read/write access to any NTFS formatted partitions when running Mac OS. I also use MediaFour's MacDrive v8 on some of my Windows PC's to access any HFS+ formatted partitions.
    Most of my drives are formatted NTFS because I have more Windows machines than I have MacDrive licenses, and with the driver for Mac OS, they are fully accessible. I have a few drives I do keep formatted as HFS+ because I have encountered an app or two that don't work quite right when they don't get to write to files on an HFS+ partition (one of my backup programs is picky about this).
    As said before, FAT32 is fully accessible between the two OS'es but it also has it's own limitations.

  • HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

    abailey46 wrote:
    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
    Sorry we are unclear as to the external hard drive and its connection to the TC..
    For instance the light that blinks.. is that the TC or external hard disk or what.
    Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
    Are you actually running Snow Leopard as the profile states?
    How old is the TC?

  • My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pr

    My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pro.

    Hello Sandra,
    The article linked below details how to go about restoring items from Time Machine in Snow Leopard.
    Mac OS X 10.6: Recovering items using Time Machine and Spotlight
    http://support.apple.com/kb/PH6379
    Sincerely,
    Allen

  • In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?

    In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?
    Thank you!

    When you erased the disk did you select Mac OS Extended Journaled as the format option?

  • I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

    I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

    See
    Deleting backups via the Finder on Lion 10.7.x or later:
    http://pondini.org/TM/12.html
    Hold option (alt) while emptying the Trash.
    See also
    http://pondini.org/TM/E6.html
    Message was edited by: WZZZ

  • I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
    Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
    Ciao.

  • External hard drive becomes "read only" and won't let Time Machine back up

    I have an external hard drive for back up, and it has been working fine until recently.
    There is a version of 10.6.6 loaded on it also.
    The back up will fail every few days. When I do some checking, the back up drive is "read only" but I am not able to switch it to read/write. I cannot repair it with Disk Utility as the repair buttons are grayed out.
    I can run DiskWarrior and it will fix it, but it runs super slow and takes all the memory to do it. I can barely use my e mail while it's running.
    Anyone know what's going on?

    System log says:
    3/27/11 8:01:19 AM com.apple.backupd-auto[1559] Not starting scheduled Time Machine backup - time machine destination not resolvable.
    It's read only because:
    A: I cannot do repairs under Disk Utility, the buttons are grayed out.
    B: I right click and "Get Info" and if I click on the lock icon, nothing happens.
    C: The disk is not listed in the Time Machine backups.
    I will try to take better notes the next time it happens and give you the exact messages.
    There is another drive daisy chained to this external drive which holds my music. The music drive does not have a Mac OS installed on it and is only for storage. It works properly.

  • My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

    My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

    Invalid sibling link may not be fixable by Disk Utility. (Disk Utility is very conservative, and will not attempt repairs that might cause you to lose data.)
    It is an indication of serious Directory damage.
    that leaves
    a) third-party Utilities that will take those risks, or
    b) re-initializing the drive (which deletes all your data) and restoring from another backup source.
    c) "Copying off whatever files you can salvage" has gone by, and you cannot copy anything off a drive that will not mount. You may be able to use "rescue" programs such as prosoft engineering Data Rescue to copy files to another drive, but that sounds a lot better than its reality. You may get many files, but not get ANY filenames.

  • External Hard Drive problems with iTunes and iPod

    I recently purchased a 320 gig external hard drive for my computer, hoping in part to load my iTunes library onto it. Obviously I'd have much more room on disc than my actual iPod, so I was going to manually manage my music (an option I didn't have selected on my iPod before).
    I followed all the online help topics which have all been helpful so far. I organized my music files, changed my directory, consolidated my library, and now everything is on the external hard drive and is working just fine.
    The problem comes when I connect my iPod. iTunes barely even seems to recognize my iPod all of a sudden, saying that it has been corrupted and needs to be restored. When I try restoring it, nothing happens, and I can't seem to do a thing about it through iTunes. Of course, there's actually nothing wrong with the iPod at all, since it still works fine and plays music exactly the same as before. It simply won't update or do anything at all when hooked up to my computer.
    I know this has something to do with the new hard drive, since everything was just fine a few hours ago, I just can't figure out why I can't get my iPod to sync all of a sudden. Like I said, my iPod is working fine otherwise, iTunes is playing music through the external hard drive without any issues, and I haven't touched any files other than music files (I haven't even deleted them off my original hard drive yet, so all the original fines remain unchanged, even though I switched the directory).
    To the best of my knowledge, all my software is up to date, and the iPod is a 30 gig photo. Any ideas?
    pc   Windows XP  

    Yeah, I gave the new drive the letter Z, so there shouldn't have been any conflicts there. I also tried your other suggestion, and while the computer recognized my external hard drive, it didn't seem to make any difference once I plugged in the iPod again.
    I've been wrestling with this for days now. I've tried changing the drive letters for both the external hard drive and my iPod several times (but no matter what, the iPod always seems to take F when it's unplugged and then plugged back in). I've tried restoring the iPod on multiple occasions. I've tried reinstalling all my USB drivers. I've consolidated my music library on several occasions (I now have two identical libraries on my external hard drive), yet annoyingly, iTunes seems to keep switching file paths away from the external hard drive and back to their original locations on the C drive. I'm trying to free up internal hard drive space, not house 30 gigs of media on it. That's what this new external hard drive is for.
    Somehow, I was able to get them both to be recognized at the same time, but it never lasts long. I'll start iTunes with the external hard drive disconnected, plug in my iPod, wait for the iPod screen to come up in iTunes, then plug my external hard drive back in. Then, I can miraculously start to transfer music back onto my iPod, but iTunes doesn't seem to want this to happen for some reason, and will usually cut off the transfer. So far I've managed to put three whole songs on my iPod.
    So now I'm trying to do two things. One, the same as before, get my computer and iTunes to recognize both my iPod and my external hard dive at the same time. And two, get iTunes to stop changing the file paths back to the C drive. These files are already on my external hard drive and don't need to change.
    (As a side note, I should comment on how helpful people are on this discussion board. The Apple representitives I called on several occasions seemed totally unwilling to help, acting more like pushy salesmen than anything, while people here seem to be much more friendly and knowledgeable. Just thought it needed to be said.)
    pc Windows XP

  • Setting up an external hard drive to back up my MacBook Pro?

    I am currently using a 320GB Western Digital external hard drive to back up my MacBook Pro using Time Machine, soon however I am going to be putting Windows 7 onto my machine so I am trying to figure out how I am going to back up the Mac OS X and the Windows partition at the same time using this hard drive. I am thinking about completetly erasing the drive and putting 2 partitions on it in 2 different formats (one for Mac OS X and one for Windows). I am also thinking of using Carbon Copy Cloner instead of Time Machine because it creates bootable backups. However, now that I am thinking about using Carbon Copy Cloner I am wondering if FAT32 will work for both partitions? (I have been using Mac OS X extended (journaled) only because it works with Time machine). I need help though because I would not know how to go about completely erasing/resetting the drive etc.. then partitioning it and formatting it. I am also wondering if there is a windows equivalent of CCC or Super Duper to back up the Windows partition. Thanks for your help in advance.

    I'm inferring from the way you wrote about using Windows that you plan on using it through Boot Camp.  Have you considered using VMware Fusion (or Parallels) instead?  Then Time Machine would back up the virtual machine along with everything else.  You also have the advantage that you can use both Mac OS and Windows at the same time - you don't have to choose one or the other.  There are two disadvantages.  First, since both Mac OS and Windows are running simultaneously, you need more memory.  I'd recommend no less than 8 GB if you run any serious software on either OS.  You can get away with 4 GB, but at times the system will be really slow.  Second, the virtual machine images are BIG - mine typically run over 20 GB - so you'll probably want a bigger backup drive if you go this way.

  • Can I store my photos on an external hard drive instead of on my MacBook?

    I would prefer to store all my photos on an external hard drive instead of taking up memory on my MacBook Pro. Is there a way to tell iPhotos to load/look at an external hard drive for all photos and info, like you can tell iTunes to look at a particular drive for all your songs? Thanks in advance for your help and knowledge. I'm new to the Apple world, but am really liking it so far.

    Welcome to the Apple Discussions.
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

Maybe you are looking for