Share MBP wifi with Mac Pro using Bluetooth

hey there, is it possible to share my MBP wifi with Mac Pro 2009 which doesnt have and airport extreme installed (yet) using bluetooth? I sort of paired both devices, and internet sharing is ON on MBP, my Mac Pro connects but there is no internet! Im using Time Capsule as a router. Maybe someone knows the answer? Thank you

No. You can share it to an Ethernet connection, though: run an Ethernet cable between them and share to that connection.
Matt

Similar Messages

I was wondering if mac mini can transmit file (share ) files/ photos with mac pro/ ipad where there is no internet

I was wondering if mac mini can transmit file (share ) files/ photos with mac pro/ ipad where there is no internet

http://www.imore.com/instashare-iphone-and-ipad-review
For more Google for:
bluetooth transfer between ipad and mac

I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

Can I use a usb bluetooth adaptor with mac pro which already has bluetooth?

Hi All,
I have an early 2008 Mac Pro. I have a bluetooth sound device that I'd like to use across the other side of the house. The problem is that the in-built bluetooth transceiver is limited in area and i have a usb transceiver that has 15m broadcast range. Is there a way i can make my Mac Pro use the usb dongle and not the internal hardware..?

You can disable the internal bluetooth radio. As long as you have drivers for your USB Bluetooth adapter you should be able to use it.

I have a Mac Pro using Lion, with a SSD for system. Restored drive from backup. Now logon password doesn't work. Account password still works. Changing password in user group preferences no longer works to change logon password.

I have a Mac Pro using Lion, with SSD for system drive. Drive stopped booting, but otherwise appeared healthy. Restored from system backup. Now drive seems to work properly, BUT my logon password no longer works. Password OK for account; can access system preferences, and change user password there BUT logon still refuses to accept password. No luck changing password for that account after adding new administrator account and logging on from that account. Suggestions? Thanks.

If you redirect Accounts to another location (not on the Boot Drive) you need to direct them back there again after a restore.
SystemPreferences > Accounts/User&Groups > ...
... Unlock the lock, then hold down Control as you click on an Account to get access to the Advanced Options pane.

Mac pro Jumping Bluetooth mouse fix

Hi found these links & thought I'd share after having to do the below external antenna mod myself to fix my poor Bluetooth signal strength between my 2010 mac pro my magic mouse.
It worked a treat!!! Thank you Nobblynoel!
How to test your Bluetooth:
http://nobblynoel.wordpress.com/2010/06/07/how-to-check-your-bluetooth-connectio n/
How to fix mac pro Bluetooth:
http://nobblynoel.wordpress.com/2010/04/25/mac-pro-2009-bluetooth-fix/
Please post if you found this useful & thank Nobblynoel.

We already have a 22 page discussion on this topic where the various methods are discussed and if memory serves, those, and other, links are mentioned.
See: Poor Bluetooth reception and jerky mouse
Update: see around page 14 of that discussion.

Can you boot a Mac Pro using a USB Pen Drive?

Hello.
Can you boot a Mac Pro using a USB Pen Drive? OS=Windows or Linux or BSD or MacOS... I know it is bios specific on a PC if the option is available. If this is possible, does anyone have a link to instructions?
Thanks,
Scott

Not to get in to an argument over semantics here, but by saying "Windows should boot if you have installed the requisite Boot Camp drivers," you are implying "that the Boot Camp drivers [are] needed for Windows to boot." I was just clarifying your post so people didn't get confused.
As for booting a Mac Pro off a USB flash drive, if you have been successful in doing so, can you share with me your method? I've tried booting of an OCZ Rally2 4GB flash drive and it's never worked on my Mac Pro. It doesn't show up when I hold option down and if I try to boot through rEFIt, I get an error about my Mac's firmware not supporting USB booting (I have the latest firmware installed, too). I've tried GPT and MBR partitions, both to no avail. Booting off USB hard disk drives is no problem though. And I can boot off this flash drive on a Core Duo iMac.
Any ideas?

I have a Mac Pro using OSX 10.7.4. When using apple mail I click on the address icon to obtain email address and nothing happens. I've restarted both the application and the Mac but still won't open address book. Any ideas please.

I have a Mac Pro using OSX 10.7.4. When using apple mail I click on the address icon to obtain email address and nothing happens. I've restarted both the application and the Mac but still won't open address book. Any ideas please.

Assuming you have these accounts set up in Mail, open preferences and under Accounts tab, edit the SMTP outgoing server list. Do you have a .mac address in the list? If so, delete it.
Are you using iCloud?
For the troubled account, select the correct SMTP server for that account in the box and check the box to use only that server with that account.

Airport Extreme base station no longer playing nice with Mac Pro

This is a strange problem...
I have an Airport Extreme base station (purchased in 2004) that I use with verizon DSL to get a wireless network going in my house, and I connect three computers wirelessly.
I have an ipod touch and toshiba PC laptop that are both able to connect to the network and run just fine. But lately (past 2 weeks or so) when I try to connect with my MacPro desktop I can go to a few sites, but after a few minutes the airport locks up. At that point none of my computers will connect and I have to unplug and then replug the airport. At that point the network will start up again and if I do not try to get on with Mac Pro then things run fine, but when I try to connect with desktop again, after another few minutes the same thing happens.
I know the problem is with the airport and my Mac Pro - I have done numerous connection experiments and have narrowed the problem down to that.
Is it possible that my MacPro might be drawing more power and causing the airport to overheat? (it is rather hot in the room with DSL connection)
Or should I accept that the current base it old, and bite the bullet and get a new base?
Any thoughts?

Could you post what you did in order to resolve the issue. I'm having a problem with the base station in that I cannot connect to the internet with my laptops (a mac and pc) while I can connect wirelessly to my network with my desktop (G4). The base station is not detected in the base statin admin utility or the aiport setup utility. If anyone else has a solution I would be much obliged to read it.
Thanks!

Anyone unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp

I'm unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp. The HP website says that the HP LaserJet M1319F MFP is compatible with Lion 10.7.2. Every time I try to perform a Test print I get an Error msg. I'm using driver version 1.3.0.261

https://discussions.apple.com/message/23765195#23765195

Note regarding ATI X1900 XT with Mac Pro, Leopard

To all who are experiencing any of the frequently reported problems with the hardware/software combination listed in the subject heading:
I purchased the ATI X1900 XT as an upgrade fro my Mac Pro in January. I never experienced any issues with the card in OS X Tiger, but several months ago I began to experience overheating issues in Windows XP (Boot Camp) when playing graphics-intensive games. The overheating caused visible graphics corruption/artifacts, graphics system resets and even spontaneous system restarts. The frequency and severity of these symptoms actually increased over time, leading me to believe that the card was either defective or that the overheating was causing degenerative/cumulative damage to the graphics hardware.
I recently upgraded to OS X Leopard, and all **** broke loose. Immediately after upgrading, I began to experience frequent graphics corruption/artifacts (in the form of spurious horizontal lines), system lockups/freezes and spontaneous system restarts. None of these issues were present in Tiger. The system became completely unreliable and essentially unusable.
It was initially a popular belief that Leopard's graphics drivers were somehow buggy or incompatible with the X1900 XT. After my experiences, I don’t believe that’s the case. I think that the issues reported are symptomatic of hardware, not software problems. Leopard is merely a catalyst. Leopard's increased leverage of OpenGL stresses the graphics hardware in ways that Tiger did not, causing an overall increase in graphics hardware temperature. I believe that the glitches/artifacts/system freezes/restarts that I experienced were not due to buggy drivers, but due to the graphics card overheating as a result of the increased load placed on it by Leopard.
I brought my X1900 XT in to my local Apple store today and asked for a replacement. Fortunately, they had one in stock, and they gave me a new card on the spot. The technician was apparently well aware of the issues, and mentioned that they have had a lot of similar problems with new iMacs.
Since installing the new card, I have experienced no graphics corruption, system freezes or spontaneous system restarts, either in OS X Leopard or in Windows XP gaming.
I would urge anyone who is experiencing problems with the X1900 XT (in either Windows or OS X) to have their card replaced by Apple - assuming that their card or system is still under warranty, that is.
I suspect one of two possible scenarios is true:
Theory #1: The Rev 1 X1900 XT is inherently flawed and has problems with overheating, which is exacerbated in OS X by upgrading to Leopard. Due to Leopard's greater leveraging of OpenGL, there is increased thermal stress placed on the card relative to Tiger. The overheating is evident in Leopard as graphics corruption/artifacts, system lockups/freezes and spontaneous restarts. The Rev 2 X1900 XT has (theoretically) corrected the problems inherent in Rev 1.
Theory #2. The thermal management system of the X1900 XT (all revisions) is inherently flawed. The card will slowly cook itself over time, and the effects are degenerative and cumulative. As the age of the card increases, so will the occurrence of graphics corruption, system freezes and spontaneous system restarts, especially when playing graphics-intensive games or running OS X Leopard.
I sincerely hope that Theory #1 is the case. I’ll be watching my system closely as I continue to use the new card, and hopefully there will be no further problems with overheating.
If theory #2 turns out to be true, then Apple has a huge PR nightmare on its hands, as each X1900 XT for the Mac is essentially a ticking time bomb that will self-destruct within months of purchase.
The funny thing is, this isn’t the first time I’ve had graphics card trouble with one of Apple’s “professional” towers. I bought a G5 several years ago when they were first released. I had problems with the stock nVidia graphics card in the form of what came to be known as the dreaded “black screen of death.” This became a commonly reported issue, experienced by many owners of the G5 in its first revision. Apple replaced my card and the problem never reoccurred. I’m hoping that I’ll be as lucky this time around.
I think it’s apparent that Apple’s batting average with graphics cards isn’t exactly stellar. It’s curious, considering that Apple offers a very limited selection of graphics options for their towers. One would think that by Apple only offering 3 graphics options, they would be able to have fairly tight control over the quality of the hardware, and plenty of time and resources to devote to testing. Unfortunately, I’ve had more graphics hardware-related problems on my Macs than any PCs I’ve ever used. That’s embarrassing, and Apple needs to do much better than this.

I replaced my G5 Quad with a Mac Pro 8-core. The Mac Pro's thermal design is far superior to the G5's. The G5 Quad's liquid cooling system has a much bigger task (IBM doesn't publish the thermal dissipation numbers on their PPCs but I suspect they are high) than the more efficient Intel Xeons. The G5 liquid cooling units are troublesome and the issue is something I think Apple is quietly solving by replacing failed liquid cooled G5's (that are still under warranty) with Mac Pros (a very smart PR move). My primary concern when I switched to a Mac Pro was issues with the X1900 XT graphics card failure rates posted on the web and in these discussions. The very latest generation of the X1900 XT (July 2007) are reported to be more reliable. Many G5 owners are still reporting failed cards. Given the much higher thermal environment and the remarks in this thread, I can now see why. The interior of a G5, especially Quad, gets too hot for this ATi card. I had the nVidia GeForce 7800 GT in my Quad. That was a very good card. Still, the issues with the ATi x1900 XT may indeed be a thermal design issue that AMD may need to either address directly, or turn to a 3rd party solution.
I installed a 3rd party cooling alternative, Arctic Cooling's Accelero S1. It's a passive system that replaces that hairdryer fan with a large heat sink. The package includes upgraded heat sinks for the power regulator (much beefier than the stock), and for each memory chip. The heat sink is a large conductive cooling assembly that uses 4 heat pipes. The vendor claims that using this system increases the case temperature by 1°C, which is easily handled by the system cooling system. So far, their claim appears to be valid. Since there's no longer a fan, you can imagine how quiet the system has become. The only installation hitch is that the black support clips were made for the PC version and the Mac Version adds a beefy support rail on the spine of the card. The workaround is to trim off the lower tang of the clips so they just rest against the support rail.
After reading this, I'm tempted to add the "Turbo" option, a couple of high volume low speed fans that fit on the radiator. I'm trying to "stress" the system by running SETI@Home 24/7 while doing all the other work to see how hot and how loud I can get this system. So far, no disappointments. This is the quietest workstation I've ever worked on. Even when "hot", the fans are not loud. The passive cooling system seems to work very well. I left Star Wars-Empire At War up and running in the menu for hours one day and it didn't seem to suffer from any ill effects. I have owned this system for just over a month. I will add more thermal load after I crank the system memory up to 24 or 32 GB. If there are any real cooling issues, I will find out about them next summer. I really dread the prospect of plunking down another $2k for the nVidia 4500 FX (I really don't need the 3D audio support) to get comparable video support.

Mac Pro using Mac Mini as Print Server

Hi all,
Mac Pro is wired to my network, Mac Mini is Airport connected.
I'd like to use Mac Mini as a Print Server without keyboard and mouse. I've installed OSXvnc-server on Mac Mini and Chicken of the VNC (CVNC) Client on Mac Pro.
Mac Pro's keyboard is azerty as was Mac Mini, it's impossible to loggin with Chicken of the VNC, password is not accepted, I connect an azerty keyboard to Mac Mini and I can loggin.
Typing on Mac Pro in Mac Mini TextEdit through CVNC give weird keyboard layout, not only azerty qwerty different layout.
In between my two Mac Mini there wasn't any problem using CVNC and the same server but Azerty Qwerty layout.
Is there any other solution to use Mac Mini as a print server ? What about using Desktop remote connection ?
Thanks,
Peloche,
MacPro 2.66, 6GB, 1TB; Mini G4, 1.45, 1GB; iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.7)

Ah… right! That explains it.
So what model printers are they?
Ned,
Printers are HP Color LaserJet 2550L, HP Photosmart 8250 and Epson EPL-5900L.
I've changed the VNC Client from "Chicken of the VNC" to "VNCThing".
Now I can log in from Mac Pro using its Azerty Keyboard as Qwerty Keyboard.
Once logged in I've set Mac Mini Keyboard to "Extended (or Expanded ?) American" keyboard within System Preferences, with this option Mac Mini see the Mac Pro Keyboard as an Azerty layout...
I've connected two printers through USB2 Hub connected to Mac Mini and the third one direct onto Mac Mini USB port.
Back to Mac Pro "System Preferences Fax & Printers", "+", immediatly the 3 printers have been proposed, I've selected them and tested all: it works perfectly.
Mac Mini is set to "restart after power cut" and is connected for power onto a remoted control power distribution sockets, that means Mac Mini is starting and stopped when printers are powered on and off.
The sole small issue is that I can't find how to display Mac Mini GUI on Mac Pro at a better resolution than 1024 x 768.
Thanks for your time,
Peloche,
MacPro 2.66, 6GB, 1TB; Mini G4, 1.45, 1GB; iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.7)

TS1702 Cannot get iPhone 4 to talk with Mac Lion using Numpad. Have updated, restarted etc. Have Screen Sharing on. It sees my computer but when I press keys on the NumPad there is no response. I have tried it on the Calculator and on Sibelius. Any clues?

Cannot get iPhone 4 to talk with Mac Lion using Numpad. Have updated, restarted etc. Have Screen Sharing on. It sees my computer but when I press keys on the NumPad there is no response. I have tried it on the Calculator and on Sibelius. Any clues??

Here's how to do it.
1. App Store, iTunes Store should have the same AppleID on Computer and iPhones. (Free to share apps, music and books... )
2. Person A uses the same purchasing account for everything (ie. email, contacts and ...).
3. Person B have the same purchase account see no. 1 (for App Store and iTunes Store) but create a second AppleID for iCal, e-mail, contacts and etc.

How to connect iphone 5 with ipad 2 using Bluetooth? When I activate Bluetooth both devices search but not listing each other to pair or connect.

How to connect iphone 5 with ipad 2 using Bluetooth? When I activate Bluetooth both devices search but not listing each other to pair or connect.

You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg

I can't transfer my files from my Power Mac G5 to my Mac Pro using firewire connections. Has anyone else had this issue?

I can't transfer my files from my Power Mac G5 to my Mac Pro using firewire connections. Has anyone else had this issue?

Don't choose from another Computer, because with the older one in Target mode it really isn't a Computer, just a big Firewire Drive, choose From another Disk...

Share MBP wifi with Mac Pro using Bluetooth

Similar Messages

Maybe you are looking for