Share Monitor error

From FCP X, I click on Share and select Apple Devices or Facebook. Share Monitor starts and runs into error. FCP says 'Final Cut Pro generated an error or unexpectedly quit'. FCP didn't quit. It is still active. Any suggestions ?

Not sure about this 'solution'. But after a few tries, I noticed that FaceBook feature works only when "Background Rendering' is selected to 'This Computer'. Screen shot:

Similar Messages

WHEN I SEND VIDEO TO COMPRESSOR 4 I GET A ERROR 0 IN SHARE MONITOR DOES ANYONE KNOW WHATS GOING ON

HELLO I AM A FCPX USER SENT JOB TO COMPRESSOR ,42 MINUTES INTO CODING I GET A ERROR (0) FROM SHARE MONITOR.I AM USING 2006 MAC PRO ,SNOW LEOPARD, 12 GIGS OF RAM...

pull the logs form the console.app.. have a look for COMPRESSOR.app or QMASTER if you have it started. Maybe a general error.. see what you can find and as BEnB asks post your results.

Share Monitor: Job stuck in queue "Canceling..."

After chosing to export a video, I check the status in Share Monitor and there's a job stuck in the queue in "Canceling..." status that's keeping the new export from starting.
How do I clear the queue?

This other post in the same error isn't helping me.
https://discussions.apple.com/message/15579267#15579267

Share Monitor Not Launching

I've been trying to export a project to YouTube and when I click "Share" the bar loads to the end then the window vanishes, leaving no files created or no disc burned. Normally I see the Share Monitor pop up but it has completely disappeared and my video is not uploading. Can anyone help? Thank you!

What error are you reciving while launching replication monitor.
Do you have sufficient permissions?
http://technet.microsoft.com/en-us/library/ms151221.aspx
To monitor replication, below permissions needed
The sysadmin fixed server role.
These users can monitor replication and have full control over changing replication properties such as agent schedules, agent profiles, and so on.
The replmonitor database role in the distribution database.
These users can monitor replication, but cannot change any replication properties
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Share Monitor not... Sharing

Hi,
I'm having a problem with Share Monitor basically not doing anything. If I try to export a project via the share menu, the small progress bar opens and states "Waiting", Share Monitor opens and then that's it. Nothing.
I see in the left column "This Computer" and when I select it there are no batches or anything. If I send the file to Compressor X and specify the device and destination, submit, it shows up under the list of priorities then it stops with no errors and more importantly, no exported files.
No error messages are generated regardless of what method I try to export the project so I have no idea where to start troubleshooting.
Any advice would be greatly appreciated!
Thanks!

Dear Mr Brown,
I have also a problem of Sharing on my FCP X 003, OS LION : it's accept to share a 3 mn projects, but don't take a 52 mn movie. The Projet is identified on the Export Windows, the "wait" and "treatment" lines start on the small window but no "bar" of process in progress appear. It can takes hours with no result. The system seems not to recognize the file physically. I my previous Imac 27 under Snow Leopard and FCP X 002 I did not have any of these problems. Memory struture of my new Imac with OS Lion : SSD Disk for Applications such as FCP and a Internal Tera Disk for Data like FCP Events and Projects. I used the feature "relinks the files" to tie FCP with the Events and Project. The 52mn project works perfectly on the Timeline but cannot be exported except through QuicKTime export process...What do you think. I would be very happy I you can spend a few time responding me.
Michel Bussac, Gordes, Provence..

Why is the share monitor stuck at 0%?

I've exported hundreds of videos using Final Cut Pro X before, but today nothing happens. No error message, no failed export. The share monitor just sits at 0%. I've tried exporting other projects that I've exported before, but the same thing happens. I'm going to try rebooting the computer, but that's the best solution I can come up with. Has anyone experienced this before?

What exact versions of FCP X and OSX are you currently using?
Al

Share monitor stuck on waiting

I am running 10.7.2 on a mid 2010 12 cpu macpro. In order to use all of the cpus I have enabled Qmaster in Compressor 4 "share this computer as QuickCluster with services". I submitted a job to the cluster (which is, in this case, my own computer) but Share Monitor just says "waiting".
I have recreated the /Users/Shared/Library/Application Support/Apple Qmaster/Storage directories. I have checked the log files. All they show is that the cluster has started up. I have turned off my firewalls. Nothing seems to work ....

have you looked at the logs in ~/Library/Application Support/Apple Qmaster/Logs ?
Yep. Log files below.
Items 1-2 log files:
contentagent.log
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <logs tms="349081519.574" tmt="01/23/2012 23:05:19.574" pnm="ContentAgent">
 <mrk tms="349081519.575" tmt="01/23/2012 23:05:19.575" pid="414" kind="begin" what="log-session"/>
cluster.admin.log
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <logs tms="349081519.448" tmt="01/23/2012 23:05:19.448" pnm="CompressorJobController">
 <mrk tms="349081519.449" tmt="01/23/2012 23:05:19.449" pid="415" kind="begin" what="log-session"/>
cluster.admin.log
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <logs tms="349081699.451" tmt="01/23/2012 23:08:19.451" pnm="qmasterqd">
 <mrk tms="349081699.453" tmt="01/23/2012 23:08:19.453" pid="633" kind="begin" what="log-session"/>
 <mrk tms="349081699.483" tmt="01/23/2012 23:08:19.483" pid="633" kind="begin" what="CJobControllerService::publishClusterStorage"></mrk>
 <log tms="349081699.483" tmt="01/23/2012 23:08:19.483" pid="633" msg="Cluster storage URL = file2nfs://localhost/Users/dmoor/Library/Application%20Support/Apple%20Qmaster/ Storage/4B645808-0B537A59/shared/"/>
 <log tms="349081699.483" tmt="01/23/2012 23:08:19.483" pid="633" msg="Publishing shared storage."/>
 <log tms="349081704.546" tmt="01/23/2012 23:08:24.546" pid="633" msg="Subscribing to shared storage, local path = /Users/Shared/Library/Application Support/Apple Qmaster/Storage/4B645808-0B537A59/shared"/>
 <log tms="349081704.569" tmt="01/23/2012 23:08:24.569" pid="633" msg="Result cluster storage URL = nfs://Mac-Pro-Shared.local/Users/me/Library/Application%20Support/Apple%20Qmast er/Storage/4B645808-0B537A59/shared"/>
<mrk tms="349081704.569" tmt="01/23/2012 23:08:24.569" pid="633" kind="end" what="CJobControllerService::publishClusterStorage"></mrk>
contentcontroller.log
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <logs tms="349081704.631" tmt="01/23/2012 23:08:24.631" pnm="ContentController">
 <mrk tms="349081704.631" tmt="01/23/2012 23:08:24.631" pid="641" kind="begin" what="log-session"/>
qmaster.executor-(1-23).log
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <logs tms="349081699.451" tmt="01/23/2012 23:08:19.451" pnm="Qmaster%20Task%20Service">
 <mrk tms="349081699.453" tmt="01/23/2012 23:08:19.453" pid="632" kind="begin" what="log-session"/>
stomp.log
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <logs tms="349081519.689" tmt="01/23/2012 23:05:19.689" pnm="CompressorTranscoder">
 <mrk tms="349081519.690" tmt="01/23/2012 23:05:19.690" pid="416" kind="begin" what="log-session"/>
stompx.log
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <logs tms="349081699.533" tmt="01/23/2012 23:08:19.533" pnm="CompressorTranscoderX">
 <mrk tms="349081699.534" tmt="01/23/2012 23:08:19.534" pid="634" kind="begin" what="log-session"/>
qmaster.executor logs (24 of em), which all have:
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <logs tms="349083267.040" tmt="01/23/2012 23:34:27.040" pnm="Qmaster%20Task%20Service">
 <mrk tms="349083267.041" tmt="01/23/2012 23:34:27.041" pid="564" kind="begin" what="log-session"/>
Item 3: NFS
 I turned off networking, and the submissions threw an error that they could not create a hard link. Since NFS was unavailable, this seemed logical. At one point I saw it creating the links, but I seem to be unable to reproduce it.
Item 4: Have 37 GB of free memory after submitted.
Item 5: With ethernet off nfs mounts failed (once).
Item 6: Copy as needed selected; don't see any copying occuring. Actually, don't even see the filenames in the executor logs. One time they did show up (when the nfs links were created).
Item 7: Two things show:
 on Startup
 1/23/12 11:34:32.277 PM mDNSResponder: Excessive update rate for Mac\032Pro\032-\032Shared\032Cluster-C741479F-E33E-41DE-B788-081C08C3E6DB._qmp5 ._tcp.local.; delaying announcement by 1 second
and randomly occuring:
 1/23/12 11:53:12.000 PM kernel: ALF: ifnet_get_address_list_family error 12
Item 8: Removed Perian via Sysem Preferences

What's happened to the Share Monitor or at least a progress bar in 10.0.6?

Previously when exporting using the Share menu, I either had a progress bar or the Share Monitor to show how my export was doing.
Now in 10.0.6 there appears to be neither of these items so I have no idea how long it will take.
Am I doing something wrong or have both these items disappeared?
If the latter, how do I estimate the time the export will take?

All exports in FCP X as of 10.0.6 are background processes, and GPU enbled so they are much, much faster.
Click the Background Process indicator in the Dashboard to see the progress there. Just like when you import files. The great news is, now you can contiue working while exporting is going on in the background.
See the Export Enhancements section of this review:
http://www.macprovideo.com/hub/review-2/review-final-cut-pro-x-1006-a-major-upda te

Mac OS (10.6.4) with Windows Server 2008 file shares, kernel errors

We experience problems with the Windows enviroment and around 15 Apple computers running MacOS 10.6.4. All Macs are Mac Pro and bought just before the hexacore series.
Problem 1: At random times the network is really slow, finder can't display the items in a SMB share. The shares are located on a Server 2008.
Problem 2: When a file is openend, there is a lock file on the share. When the document is saved and closed, the lockfile isn't removed directly. This causes problems when people reopen the document too fast and get a read-only document because the file is allready in use.
I tried to copy a 80GB file from a Ubuntu (created with /dev/null) to the Mac. There are no problems copying it from Ubuntu with rsync.
Then I moved the 80GB file to the server share, these errors came up:
Oct 19 10:45:16 woerden4mac13 kernel[0]: smbiodsendall: Timed out waiting on the response for 0xa0 mid = 0x2c78
Oct 19 10:47:17 woerden4mac13 kernel[0]: smbiodsendall: Timed out waiting on the response for 0xa0 mid = 0x2e0d
Oct 19 11:12:04 woerden4mac13 kernel[0]: smbiodsendall: Timed out waiting on the response for 0xa0 mid = 0x8bd2
Oct 19 11:17:55 woerden4mac13 kernel[0]: smbiodsendall: Timed out waiting on the response for 0xa0 mid = 0x9ee2
Oct 19 11:20:14 woerden4mac13 kernel[0]: smbiodsendall: Timed out waiting on the response for 0xa0 mid = 0xa17a
Oct 19 11:31:27 woerden4mac13 kernel[0]: smbiodsendall: Timed out waiting on the response for 0xa0 mid = 0x5931
Oct 19 11:56:21 woerden4mac13 kernel[0]: smbiodsendall: Timed out waiting on the response for 0xa0 mid = 0x20f
Oct 19 11:58:48 woerden4mac13 kernel[0]: smbfsvnopwrite: test.bin wrote pass the eof setting it to 6389084160 failed with error of 27
Oct 19 11:59:10 woerden4mac13 kernel[0]: smbfsvnopwrite: test.bin wrote pass the eof setting it to 6917591040 failed with error of 27
Oct 19 12:00:00 woerden4mac13 kernel[0]: smbfsvnopwrite: test.bin wrote pass the eof setting it to 8108298240 failed with error of 27
Oct 19 12:00:36 woerden4mac13 kernel[0]: smbiodsendall: Timed out waiting on the response for 0xa0 mid = 0x56c1
Oct 19 12:02:36 woerden4mac13 kernel[0]: smbiodsendall: Timed out waiting on the response for 0xa0 mid = 0x7872
Oct 19 12:02:36 woerden4mac13 kernel[0]: smbfsvnopwrite: test.bin wrote pass the eof setting it to 11187425280 failed with error of 27
Oct 19 12:03:13 woerden4mac13 kernel[0]: smbfsvnopwrite: test.bin wrote pass the eof setting it to 12091944960 failed with error of 27
Can anyone help?
Network:
Windows 2003 domain controller
Windows 2008 file server
Gigabit network
CS5 program's are used
Problems arrised when Mac OS 10.6 got installed
Previously we used 10.4 with ADMitMac

This might relate to you as you are using a Windows 2008 Server with Mac clients.
Apparently there seems to be an issue with SMB, since Microsoft rolled out SMB 2.0 with Windows 2008 Server. According to Microsoft, SMB 2.0 is supposed to solve world hunger and bring peace to the middle east, but in reality, it just puts up more road blocks for non-Microsoft platforms. Check out this article I found:
http://www.petri.co.il/how-to-disable-smb-2-on-windows-vista-or-server-2008.htm
Currently we have an issue with all 40 of our Macs not being able to save files properly to the Windows 2008 file server due to what the message claims to be a permission issue, but in reality it seems like something to do with the SMB protocol. We are investigating the issue and will see in a few days if the problem can be resolved by disabling SMB 2.0 on Windows 2008 Server.
Let us know if this problem resolves your problem as well. You never know how many other issues can be caused by a twitchy SMB protocol.

Windows 8.1 Network Share 0x8007003b Error Copying Files

Hi All,
I'm having an issue when copying files from a Windows network share. If the file is above 5MB it will start copying and then after a minute or two I will get an error such as:
Interrupted Action
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
Error 0x8007003B: An unexpected network error occurred.
The network share is in a different office and is accessible over a point-to-point VPN, so the connection is not that fast.
But before everyone tells me to start diagnosing the router and or VPN please take note of the following:
My colleague who is running Windows 7 can copy files from the network share fine
If I run a Windows 7 VM on my Windows 8.1 laptop I can copy the files across fine
I also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client
VMs to a similar speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
There is also a noticeable difference visually when copying using Windows 8.1 and Windows 7:
Windows 7 - The progress bar progresses smoothly giving the current speed and estimated time remaining
Windows 8.1 - The progress bar progresses in a jumpy fashion. E.g. it shows no progress, then after a minute it jumps and shows 16% progress, then shows no further progress, then jumps by another 18%. There is no estimated time remaining.
I ran Wireshark to investigate what was going on at the network layer. I see the following behaviour:
Windows 8.1 - The file is copying fine then all of a sudden there are a lot of TCP dupack packets. After which the Windows 8.1 client sends a RST packet and then the error pops up.
Windows 7 - The file is copying fine then you also see a load of TCP dupack packets, however no error is displayed and it continues copying fine.
I'd appreciate any help with this I'm hoping there are some settings I can change to make Windows 8.1 behave more like Windows 7!
FYI originally posed here (but was advised to ask on Technet) - https://answers.microsoft.com/en-us/windows/forum/windows8_1-files/windows-81-network-share-0x8007003b-error-copying/300bc9a4-597b-402a-b885-9dd6f6fb51a2
Thanks,
Zak

Hi MeipoXu,
Sorry, it has taken me so long to reply. I thought I had subscribed to receive updates on this thread, but I didn't see anything!
I've ran the commands you gave but some of them did not work, I got the following error:
Set global command failed on IPv4 The parameter is incorrect.
However, output of current settings are below.
TCP Global Parameters
Receive-Side Scaling State : disabled
Chimney Offload State : disabled
NetDMA State : disabled
Direct Cache Access (DCA) : disabled
Receive Window Auto-Tuning Level : normal
Add-On Congestion Control Provider : none
ECN Capability : disabled
RFC 1323 Timestamps : disabled
Initial RTO : 3000
Receive Segment Coalescing State : disabled
Non Sack Rtt Resiliency : disabled
Max SYN Retransmissions : 2
To answer your original questions.
Do you mean the file below 5 MB will copy fine ?
5MB is not a hard limit. If the file is small enough it will copy before it errors out. A file of around 5MB or so fails with an error.
Have you tried to copy the files from another Windows 8.1 machine (This will help us to verify whether the issue is casued by the specific machine)?Have you tried to copy another file from the network share to have a check ?
Yes I've tried from another Windows 8.1 machine and have the same behaviour. It is the same with different files from the network share. And the same with different network shares.
I am seeing nothing in the event viewer when the error occurs. I do not believe this to be a VPN issue because I can recreate this situation perfectly. As I mentioned in the original post- I
also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client VMs to a similar
speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
Basically, I had virtual machines all on the same local network. One virtual machine was hosting a file share with files on it. I created one Windows 7 VM and one Windows 8.1 VM. Using VMWare Workstation you can limit the network bandwidth to the VMs. When
I did not limit the network bandwidth I could copy all files of all sizes fine. However, when I limit the network bandwidth to a speed of around 30-50KBps, the Windows 8.1 VM fails to copy files with the same error. But Windows 7 VM copies the files fine.
The point of limiting the bandwidth in this way is to create a similar scenario to that I see when connecting over the VPN.
This all leads me to believe there is some sort of issue with copying files from fileshares over slow connections using Windows 8.1.
Cheers,
Zak

My computer is not showing up in share monitor

Hi
I was happily creating and sharing files to Vimeo from Final Cut Pro x - When I had a kernal panic - Hard reset and now "My Computer" does not show up in share monitor - It says no clusters found - When I goto share a file to vimeo now nothing happens ..
Any clues - I am going mad....

There is nothing to fix, it is not supposed to show up there. It will only show there as a 'camera' if there are photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc which you might want to then copy to your comptuer.
What do you want to do with the iPad via My Computer ?

BW Monitor error Could not find code page for receiving system

Hi All,
Frequent BW Monitor error - Could not find code page for receiving system
I checked SM59 and every setting is fine there. Any other possibility ?
Regards
Srinivas

The log updated in the status tab was:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.

Hardware monitor error

have any of you experienced spontaneous system shut downs followed by bios reports of 'hardware monitor error' press delete to enter setup etc. My system has been brought to its knees by this and the good people at samsung have told me that it is probably the vga or the mainboard - which are the g4ti4200td and the a7v333 respectively. I am stumped, is this possibly an IRQ issue, or a refresh rate issue or what. The problem is not isolated to high graphic output operations, indicating, I would thing, a memory problem. It happens seemingly in spite of me, no matter if I am running any programs or not.
any info is much appreciated... thanx ?(

Can I have your specs of your computer you are running on? Thanks...

Share Monitor will not open up

I have burned dvds using FCPX before but today it is not happening The Share Monitor Window that usually pops up is not coming up. There was a m2v file created on my hard drive but i specifically selected the optical drive for the output. any suggestions?

You can open the about:config page via the location bar and do a search for jzip via the Filter at the top of the about:config page. 
You can reset all jzip related prefs via the right-click context menu to their default values.

MacBook transport monitor error -4960?

I've been using my MacBook with Palm Zire 31 and hotsync for some time and all of a sudden I get, and can't get rid of, "transport monitor error -4960." I've read all kinds of solutions in this forum and none work. I've reinstalled, deleted and reinstalled, I've removed permissions, etc. I can't delete com.palm files becuase I can't find any to delete (search does not fine them.) What's going on? Why is this happening and how can I fix it? I have not been able to back-up/synch my Palm since May 15!
Post relates to: Zire 31

Alan, thanks but the solution provided/suggested did not work. I'm just about ready to give up on all Palm products at this point. I followed all the steps to clear out all the Palm files. I reinstalled the current version for my Apple, and I got the same error. I then attempted to follow the suggestion for a safe boot and simply just enable the synch and do it that way. That didn't work either - I got another error indicating the synch was incomplete. Nothing works. Why can't Palm just find a work around to Apple's new OS? The Apple is more expensive than the Palm, so the Apple wins. Either Palm creates and provides a fix for this or I'm dumping all Palm products...I can't use a PDA that isn't going to be compatible with my laptop.
Post relates to: Zire 31

Share Monitor error

Similar Messages

Maybe you are looking for