Share more RAM with GMA 950

would be possible to share more RAM with the GMA 950 ? I have 2 GB ram and 64Mb is shared with graphic card.Let's say i would like to share 128MB will this help to something ? If yes, where i can do it? I know how to do it on PC but dunno about mac. Thanks

Yes, it would be nice but Intel graphics are set to use only so much Ram even if you have some to spare. It would not provide any better performance even if you could. Because of the design of the chip its not capable of doing a lot of with games for example. The new chip x1300 from Intel which is on the newest MacBooks will use more Ram and can play some games like Far Cry with lower resolutions and slower frame rates. But some say its still pretty good. One of the big problems is that game studio's design games for Nvidia and ATI cards and don't even consider anything else. That's is to bad for those of use who by laptops.

Similar Messages

  • Displaying 1920x1200 on Samsung 2443BW, macbook with GMA 950

    I just purchased a Samsung SyncMaster 2443BW. I connect it through DVI and the highest resolution I can set it at is 1280, higher options are not offered in display preferences.
    The monitor's native resolution is 1920x1200.
    The macbook I am using has a GMA 950 card which is supposed to support up to 1920x1200 on an external monitor.
    Would anyone know how to make it work? Thanks in advance

    Hi and welcome to Discussions,
    taken from Apple Video Developer Note found here:
    http://developer.apple.com/documentation/Hardware/Conceptual/HWTechVideo/Articles/Video_implementation.html#//apple_ref/doc/uid/TP40003994-SW741200331181
    *External Display Modes*
    The default display mode setting on the MacBook is extended desktop display. To toggle between the two modes, press the F7 key, or go to System Preferences>Displays>Arrangement.
    A scaling function is available when the internal display and an external monitor are both operating and the mirror mode is selected. However, the external monitor could have black borders during mirroring, depending on the supported timings between the two displays and on the monitor’s selection algorithm. Black borders are not seen on VGA displays.
    Both displays show full-sized images when the display resolution for the external monitor is set to the internal display’s native resolution: 1280 by 800. Both displays can operate with other resolution settings, but in mirror mode, one of the displays may be smaller than the full screen and have a black border around it. With the resolution for the external monitor set to less than 1280 by 800, the image on the internal display is smaller than its screen. For resolution settings larger than 1280 by 800, the image on the external monitor is smaller than its screen.
    In mirror mode, the maximum size of the external display is 1280 by 800 at 60 Hz. In extended desktop mode, the maximum size of the external display is 1920 by 1200 at 60 Hz.
    Regards
    Stefan

  • More ram with snow leopard?

    can a late 2008 MBP 2.53 hold 8 ram if snow leopard comes out?
    right now my top is 4 gigs....it would be nice if this were possible

    neuroanatomist wrote:
    The limitation was hardware, not software. Snow Leopard won't change that.
    ...which is really unfortunate for those of us who had taken the plunge in late 2008.
    Apple Insider had published a great article explaining it in detail, but I cannot find it right now.

  • Final Cut Studio 2 and iMac with iGMA 950 Graphics

    is it possible install final cut studio 2 on iMacs with GMA 950 Graphics card?
    thx

    Comments on the matter here:
    http://forum.insanelymac.com/lofiversion/index.php/t41959.html

  • Adding more RAM to Intel GMA 950?

    So I've had my iMac (see bottom of post for specs) for a while now and I love everything about it, except the Intel GMA 950 intergrated graphics. It works, but as far as games go, I can hardly play Halo. It's gotten better since 10.5.6 seeing as it boosts graphics performance, but it could be better.
    I'm aware that it's VRAM is shared with system memory, so is there any way I can give the chip more of the system RAM to use? 2gb is plenty, so I'm willing to share some. Any help is appreciated.

    Jerroslaw,
    since you’re running Mavericks, open up Activity Monitor while you’ve got your usual selection of apps running, select its Memory tab, and look at the Swap Used setting in the lower left. If it’s displaying “0 bytes” as the amount of swap used, then extra RAM won’t make a difference. Otherwise, to answer your first question, whether it’s worth it or not depends upon how frustrated you are running your usual selection of apps with 4 GB of RAM. It might be that the cost of replacement RAM modules outweighs your level of frustration — only you can make that determination of worth. I would recommend that if you do choose to purchase replacement RAM, that you get a pair of matching modules — either 2 × 4 GB = 8 GB, or 2 × 8 GB = 16 GB, to replace the pair that is currently installed.
    For your second question, you don’t have to use Apple-brand RAM, but you do have to use RAM with the same characteristics as your factory-installed RAM uses. Any worthwhile purveyor of RAM for Macs will let you easily locate modules that are compatible with your Mid 2012 MacBook Pro.

  • Is it possible to increase GMA 950 Video Ram from 64MB?

    Hi,
    Sorry if this question has been answered plenty of times before, but I am wondering if there is a way to increase the GMA shared VRAM from 64MB?
    If not is Apple planning to make this a configurable option in future firmware versions?
    The reason I'm worring about video RAM is although the GMA 950 holds up pretty well in OS X animations, as soon as I start using 2 or more desktops in spaces, or 2 monitors, things get choppy. Has anyone else had this problem and if so did anyone find a solution?
    Message was edited by: squater

    That might be a good idea. I started out with an upgrade myself and had a few problems. I then did a new install and it runs much better. You might want to try an Archive and Install.
    Mac OS X: About the Archive and Install feature
    Mac OS X 10.4, 10.5: About installation options
    Apple OS X 10.5: Leopard Installation and Setup Guide

  • Sims 3 with a GMA 950 Graphic Card?

    I really want to use the sims 3 on my macbook. It's a few years old. I looked in System Profiler and saw that i have a GMA 950 graphics card? I'm going to upgrad my memory to 2GB. Will it be possible to play the game?
    Thanks for the help!

    It may work, but the graphics card is NOT supported. I saw this thread:
    http://discussions.apple.com/thread.jspa?messageID=9573469&#9573469
    Which doesn't clearly state if the users were successful or not with the Mac version of Sims 3.
    Maybe someone else will have more solid information.
    ~Lyssa

  • I have a MBPro 2.4 Ghz with 2 GB ram max. is there anyway to add more ram?

    so this might be a really stupid question
    I have a MBPro 2.4 Ghz with 2 GB ram max. is there anyway to add more ram?

    unfortunately i don't have the manual anymore
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro3,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          4 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MBP31.0070.B07
      SMC Version (system):          1.16f11
    I've read that max'ing out ram isn't the best thing to do. also i've read that some memory chips are faster than others?
    thanks for all your help

  • What will I notice with more RAM? or FCE HD?

    Right now FCE2 seems to be laboring between tasks. Since I just upgraded to the intel it is kind of a disappointment because my g4 Ibook never blinked (at all)... I like the new mac but seems like the old one handled more with less processor and same ram... Is it the older FCE2 or do I need more RAM? Would like to get dialed in for performance... so I can get more work done...

    FCE2 is running under Rosetta. Since it is not a Universal Binary program it will not work as well as FCE3. 512 Mb ram is not much even for running FCE3. You would get better performance with more RAM. RAM is very cheap right now, I paid $39.00 US for a 1 GB stick recently. More RAM would help your FCE2 run better. You would also find it improves a lot of other things on your Mac.

  • What games can i run with a Intel GMA 950 64 MB

    what games can i run with a Intel GMA 950 64 MB
    i want to play games like
    cod
    halo
    gta
    anything like these can i do it

    An afterthought. There is a site called Inside Mac Games  
    http://www.insidemacgames.com/ 
    They have a forum which may be a good source for info on games you can play on your Mac.

  • With intel core 2 duo it's possible more RAM? in early imac 2006

    I could change the processor core duo per core 2 duo of my IMAC, that is from early 2006... the cuestion is: the description of this mac says that only works with 2 gb of ram, but with the new processor it can upgrade this RAM, per 3 or 4 gb?
    Thanks for your answer

    You actually were able to change the processor to a Core 2 Duo in that machine? I've only heard of one other person who did this, but it did not work too well for them. Also, they did it so they could upgrade to Lion and that did not work either: the App Store recognized the machine ID as one with a Core Duo and would not allow them to install Lion. So if you changed yours to a Core 2 Duo to get Lion, your efforts were wasted.
    As for allowing for more RAM - since people do not replace processors on iMacs in general, no one here will probably be able to answer your question.

  • Have imac osx 10.6.8  with 2 gb 667 mhz ddr2 sdram. Can I get more ram and a good video card to use CS6 Premiere Pro

    I'd like to upgrade with more ram and a proper video card to properly use Adobe Premiere Pro CS6.
    I have an imac version 10.6.8  Can I boost this mac.
    Hardware Overview:
      Model Name:          iMac
      Model Identifier:          iMac5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          1.83 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          2 MB
      Memory:          2 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          IM52.0090.B09
      SMC Version (system):          1.6f0
      Serial Number (system):          W86510LAWH5
      Hardware UUID:          00000000-0000-1000-8000-0017F2CA47EB

    Sorry, you have the maximum amount of RAM in your computer, as shown in the specs below. Also the video card can not be upgraded.
    Maximum Memory     2.0 GB
    Memory Slots     2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

  • Imovie Export Time Better with More RAM ?

    I have an Imac, one before latest release, 3.06 CPU and 2 Gig RAM. A 17 minute video is exporting right now using H.264 and 1920 x 1080 settings and Imovie is telling me that it will take 3 hours. Also, the source video and the exported file are both on an exernal firewire drive (which I know was a mistake).
    Question, if I installed 2 gigs more RAM, would it make a big difference ?

    I'm a strong advocate for maximizing RAM, but It won't shave that much time of the processing. It still takes a long time to process hd. You will feel the RAM while you work and use multiple applications. It will take out the lag. However, becareful on choosing the RAM. A friend of mine went a really inexpensive route and wound up with conflicts and problems. Its not worth the dollar savings...

  • How do I share my contacts with more than one group? I really don't want to have re-type them into a different group. Help!

    How do I share my contacts with more than one group without having to re-type them into each group?

    Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
    iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
    You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

  • Ok, so i bought a imac 27 about 4 months ago, and now they release a new one!  ****... So my question is, should I sell this one (which by the way is the i5 2.8 with 1 gb 5750 and 4gb ram) and buy the new imac 27 i5,or keep the one i have and buy more ram

    ok, so i bought a imac 27 about 4 months ago, and now they release a new one!  ****... So my question is, should I sell this one (which by the way is the i5 2.8 with 1 gb 5750 and 4gb ram) and buy the new imac 27 i5,or keep the one i have and buy more ram. I mostly use my computer for photoshop cs5 and illustrator cs5 for graphics out put as well as surfing the web and music.
         Please give me you thoughts on what I should do!!  Thanks  lot!

    The new iMac is about 25% or so faster than your current iMac(comparable model would be the 3.1ghz version). There are a couple of things that you will benefit from such as the dual Thunderbolt/Mini Display ports/ which may help with multitasking. The video card in the new iMac again the comparable model being the 3.1ghz is a lotttttttt better than the current one that you have. So thinking of the long run those few things may be beneficial for you to upgrade(but it depends on what is important to you).
    I had the 2.93ghz i7 version that I just bought in March this year and I turned around and sold it about a week before the new iMac's were announced. I got about $1600 for it, yeah I took a loss but to me it was worth it because my new iMac performs that much better. Now keep in mind I went from i7 to i7...3.4ghz i7 with the 2gb video card. Now I have dual thuderbolt/mini display ports. I have noticed significant gains in my video editing and also in my gaming. So to me it was definitely worth the upgrade!
    One last thing, I would not have sold my 2.93 i7 and then bought the 3.1ghz i5, the big reason is because HT(hyper threading), it's only on the i7 model(3.4ghz)... If you take a look at some of the bench marks on engadget, maclife, macrumors, macworld, ****Barefeats.com(they really get into benchmarking)*** you will see charts that will help you make a better decision.
    In closing I would say look into it, if you can get a good price out of your current iMac to put toward a new iMac then do it. Like others have mentioned to you, tech changes and Apple will change the tech in these machines next year or do a speed bump later this year or so. One last thing if you go from the 2.8 i5 up to the 3.4 i7, you would definitely see the difference (HT is a must especially for programs that utilize it. You can go to my youtube channel(mob1278) and take a look at my geekbench results.... my 2.93 i7 scored around 10500-11000(8gb ram)...my 3.4 i7 scores from 12700-13000 with 4gb ram....so yeah as you can see big difference. Basically the 3.4 i7 would perform similar or just under a 2.4ghz 8core 2010 Mac Pro which runs you about $3500 with no monitor.... it's your money spend it how you want....and Lion is only going to push it even more when it is released!

Maybe you are looking for

  • Upgrade to 7.2 from 7.1

    I just got a new macbook pro with 2.4GHz (intel of course) I had previously had a powerbook G4 (powerpc of course) I have Logic 7.1 I need the universal crossgrade I have read EVERY other post similar to this and I understand that I need to buy the c

  • Issue while loading data to sample essbase app using odi

    while executing data load the error is Now, while loading data to an essbase app i am getting the following error: org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last): File "<string>", line 23, in ? com.hyperion.odi.essbase

  • I cant receive calls!!!

    I can not receive calls on my wife's cell phone. ATT should have support open 24hrs in general but especially this weekend. Any suggestions?

  • Payment File Encryption

    Hello, I would like to know the process of payment file encryption.... Please let me know where i can get the SAP documentation on this. Thnx SundAR

  • Interview Question -Help needed

    The below question was asked by interviewer in my yesterday  Interview. lets assume Procedure has one Sql Which returns 100 rows and working fine and after 2 days it stopped returning values what error my procedure throws and what could be the reason