Share online fails to launch: "system error" 5800

hi,
i've added ovi and flikr accounts to my share online application on my nokia 5800
i've managed to upload several photos but after restarting the phone the share online application fails to launch.
It thows "system error" message upon loading and immediatly closes.
Clicking the upload icon from the image viewer gives the same result.
i've done hard reset which seemed to help, but after restoring a backup with phone settings the problem returned as well.
is there a way to reset share online's settings without resetting all of the other phone preferences and access points?
Solved!
Go to Solution.

ok, managed to solve it (just to make it quicker to others having this issue)
there are two solutions:
the official one is to do a backup on everyone except your settings, do a hard reset, restore (not the settings/apps).
this will work but you will have to reconfigure everything and reinstall a lot of apps.
the unofficial solution requires a formidable amount of skill but it's doable,
read the quick post on how to get a developer certificate here: http://www.nokiaapps.org/symbian-os-9-4-s60v5-apps-games/11372-sign-any-symbianos9-4-get-your-own-de...
once you'll get the file and install the app (takes a day or so to get it)
follow these instructions to allow access to your c:\private folder
http://www.nokiaapps.org/symbian-os-9-4-s60v5-apps-games/12129-5800-hacked.html
once complete delete the folder c:\private\2000bb61 (i hope it's the same naming in all devices, if not search for the ovi-logo-1.svg file in the c:\private folder
once deleted your app will work as expected.

Similar Messages

7.1.1 iTunes Fails to Launch (No Error Message, Pretty Weird)

After downloading iTunes 7.1.1, I installed iTunes. The installation went well and everything was installed. I had no problem with installation.
However, after installing, I tried opening iTunes. However it fails to launch and I don't receive an error message.
When I open the Windows Task Manager and check out the processes, the iTunes.exe appears for 10 seconds and then disappears.
The weird thing is, is that iTunes version 4.0 works perfectly. (I think it's 4.0. It's the one that has the green note. The current versions have the blue note.)
I can open it up and play my music.
I have a Dell Dimension 8200 (It's about 6 years old.) The operation system is Windows XP.
Can someone explain and tell me how to fix this problem, so I can open iTunes 7.1.1.
Thanks.

However, after installing, I tried opening iTunes. However it fails to launch and I don't receive an error message.
When I open the Windows Task Manager and check out the processes, the iTunes.exe appears for 10 seconds and then disappears.
doublechecking one more thing that can help narrow in on possible culprits with these sorts of symptoms.
try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)

SSAS Cube Dimension Processing Fails Reporting: File system error: A FileStore error from WriteFile occurred

Hi,
I have a SSAS Cube Database for which the processing had been stopped since the year 2012, but as the requirements have again come up, this cube needs to be processed on a daily basis again, to refresh the cube with new incoming data.
As i was testing the cube processing steps before finally re-activating the cube processing in production, i came across a weird error while doing a manual processing for a Dimension.
File system error: A FileStore error from WriteFile occurred. Physical file: \\?\D:\MSAS10.MSSQLSERVER\OLAP\Data\Citi.184.db\Dim Extended Data.0.dim\54.Extended Data.ksstore. Logical file: . . Errors in the OLAP storage engine: An error occurred
while the 'Extended Data' attribute of the 'ExtendedData' dimension from the 'Citi' database was being processed.
This error came to me while i was doing a process update for the dimension, i even tried to do a Process Full for the same dimension which did not help. I then did a Unprocess and then a Process Full, which didn't work as well.
Can anyone please help me with this issue. I am using the SQL Server 2008 where the cube is hosted and the processing used to work fine earlier, but now its failing with this error.
Thanks

This looks like the 4GB string store limit. If you can upgrade to SQL Server 2012 Analysis Services, you can change a simple setting and grow beyond that 4GB string store limit.
http://technet.microsoft.com/en-us/library/gg471589(SQL.110).aspx
If you can't upgrade, what data is in that ExtendedData attribute? If it's a meaningless surrogate key that you don't need users to see, you can use this trick to avoid the 4GB string store limit:
http://cwebbbi.wordpress.com/2012/08/10/storage-and-the-namecolumn-and-keycolumns-properties/ But if it's something the users need to see, there's not an easy way to fix it without upgrading to SSAS 2012.
http://artisconsulting.com/Blogs/GregGalloway

OSD works on one but fails on subsequent systems error 0x800700002

SCCM 2012 OSD deployment error 0×80070002
In the last 5 days we are seeing this
error code 0×80070002 when we try to deploy systems.
If we start more than one system before letting the first task sequence
OS download the .wim file we see this error on all subsequent systems we
are trying to deploy. (Note the first system will deploy and complete
the task just fine)
We tried removing and re-adding the network access account and also
setting up a new one with the same results , nothing in the smsts log of
the failed system it just stops logging. Also tried to copy the .win
from the DP pkg share from the command prompt on the failed system and I
get this message: (process cannot access the file because it is being
used by another process).
if I try and copy the file from two desktop system though windows file
explorer they copy just fine as long as the task sequence has finished on the OSD deployments
if not you see process cannot access the file because it is being
used by another process.
Any ideas.
Thanks

Jeff:
Thanks for the reply all our DP's are physical boxes and have not been updated or touched in a month, this issue started last week, so if I PXE boot 2 system and run the a task sequence, both system start the task till one of them starts to download
the image wim, at that second the other will fail with the 0x800700002, if I go to the system that failed and open a cmd prompt and map to the DP's smspkgd$\pakage id and do a copy *.win to the c: of the failed system I see on the screen (process cannot access
the file because it is being
used by another process)
I have an open ticket with MS but we are having no luck. (one more thing the system that did not error out completes the task just fine)

3 Creative Cloud packages all fail on Launch with Error 16

Hi,
I am using creative cloud packager to create applications to deploy using SCCM, which I have successfully deployed in the past.
I created 3 new creative cloud packages this week, Edge Animate, After Affects and Premier Pro, for the 64bit platform.
The machines their to be deployed to are Windows 7 SP1 64bit, two machines I tested to were absolutely fine, all other machines tested to have deployed, but on launch all three apps behave the same way. A prompt suggesting I uninstall and reinstall the product. contact Adobe support if the problem reoccurs. Error: 16 (These machines are a mixture of freshly built and established desktops)
I have tried the steps to resolve similar issues for error 16 in this link http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
But they did not resolve the problem, I have recreated the packages and tweaked some settings but this consistently occurs regardless of what I do.
Any suggestions on what could be the issue or where to look for information to find the cause on the machines would be appreciated, there is not much regarding this scenario available from forums.

Error 16 is usually related to a permissions issue.
Try checking the logs, for more information: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
Also, check the installation logs, for any relevant information: http://helpx.adobe.com/creative-cloud/packager/creating-packages.html#Adobe Creative Cloud Packager logs

Itunes and quicktime both fail to launch, giving error reports

Getting a little ticked because ive been trying to get itunes to properly work.
To clarafy, i've done the following to try and fix this problem
Uninstalled itunes and quick time
Re-installed
Uninstalling just quick time and it almost loaded until it gave me the audio codec issue(i know i need quicktime for itunes to even work)
I've installed older versions of itunes (same issue)
I've tried loading up itunes on a different user account
Now i don't know what left to do (besides trying the msconfig, im in the process of doing that right now)
I need help guys
I'm really close to just taking back the ipod nano and getting something more windows compatable

Have you ever installed any of the following:
ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter.
They are known to cause crashes with Quicktime. If you have one of them, you need to uninstall it.
You can get a clue to the presence of a problem codec by trying to run QUicktime preferences from the control panel. If you get an error message like this:
"An exception occurred while trying to run "C:\Windows\system32\shell32.dll,Control_runDLL "C:\Windows\system32\QuickTime.cpl"
You could have a problem codec, QUicktime does not install Quicktime.cpl in the system32 folder.
Then try the following method for removal of iTunes and associated components and Installer cleanup:
Download a fresh copy of iTunes and the stand alone version of Quicktime
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
http://docs.info.apple.com/article.html?artnum=93698
If you hit a problem with one of the uninstalls don't worry, carry on with the deleting of files and folders as directed in the method.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes

ITunes will not Launch - System error

After updating my OS X to 10.4.3 and updating iTunes to 6.0.1 I found that I was unable to launch iTunes. The error message stated "unable to read file or write to disk".
This seemed to sound like the file or app was locked down from what I understand from my other mac friends.
I am desperately missing my iTunes music and the ability to view Quicktime as well. Not sure if they are inter-linked.
Somebody please help?
17" Metallic G4 Powerbook Mac OS X (10.4.3)

Put me on the list of people for whom iTunes won't launch anymore.
I got the notification that iTunes had a new upgrade last night. So I let it. After that, everthing seemed to go normally except that after I click to accept the licence agreement, an error comes up
"The iTunes application could not be opened. An unknown error occurred. 0x666D743F"
That's it. I've tried removing iTunes and reinstalling about 4 times. I've also removed both iTunes and Quicktime, then reinstalling. I don't use Norton firewall. I do use Norton Antivirus. NAV is up to date.
I've used the registry editor to check for anything that may be left behind. It appears clean after an uninstall.
An interesting thing is that the desktop icon after a reinstall is a generic looking one with 6 little icons inside a slightly larger rectangle. When I right click to change to the nicer iTunes icon I notice that a lot of information to "start the program in" is missing. I've tried putting the path to iTunes in there, but that doesn't help either.
I sure hope some help or a fix/workaround or whatever is forthcoming. My iPod nano is going to be useless soon without a functioning iTunes.

Final Cut Fails to Launch - No Error Message

I have tried the following:
-Trashed Prefs.
-Loaded and used FCP Rescue
-Completely wiped the machine of Final Cut Studio and reloaded
Still, the following happens: Once I trash the prefs or run rescue, FCP loads fine. I can work on saved projects, etc. However, when I close the program and try to reopen it, the same thing happens again; it will go through the initial startup screen, and as soon as it gets to the point where the workflow area would come up, it closes. No error message or anything - just sops working.
I've updated the machine completely, and all software is to date. The only thing that's happened recently - incase this gives anyone an idea of what's wrong - is that I used Boot Camp to remove the XP partition I had on the machine. In addition, I've tried to change the main user data to another editor, as I recently upgraded my machine to a Quad 3 Mac Pro... Would changing user settings effect FCP? Even though I've since completely wiped it and started over?
G5 Intel IMac 2.0Ghz Mac OS X (10.4.7) Final Cut Studio 5.1

Create a new user account and see if FCP opens for the new user. If it does then there's something going on with your user prefs.
Make sure you don't have this license running on more than one machine at the same time.
There may also be a corrupt file, is this problem associated with a particular project being loaded or file being used?

Quicktime fails to launch with Error 46 in Windows 7

"Error 46: Could not load or find the QuickTime ActiveX control," in Windows 7 Ultimate 64bit. Tried uninstall - re-install as administrator without success. I have seen several postings indicating a permissions issue but install and run as administrator should avoid such issues. I also tried running in XP compatabilty mode with admin rights to no avail. I have yet to see any real solution. I have my Pro license but can't apply it till the appl;ication runs. Any suggestions for a real solution?

Hmmmm. So FairPlay, BonJour and iTunes didn't update, but QuickTime, AAS and AMDS did.
This has me wondering about security software interference. If that's afoot, we may be able to get past it by a "download, restart, disable, install" strategy.
First download and save a fresh copy of the iTunes64setup.exe (installer) file from Apple. (Don't run the install on line and don't start the install just yet.)
http://support.apple.com/kb/DL925
Now restart the PC. After the restart, do not open any applications. Disconnect from your network and/or the internet. Now disable all your security software (firewall, antivirus, antispyware).
Just in case, this time we'll start the install by right-clicking the iTunes64Setup.exe and selecting "Run as administrator".
Reenable all security software prior to reconnecting to the internet and/or your network.
... Any better luck with the install this time around?

Share Online- System error -34

Hallo,
if I want to upload pictures to Ovi store from my Nokia N82 ( by aplication Share Online) there is a System error -34 and I can´t upload my images Only when I come home and I am on Wlan it works.
If I want to upgrade my Share online, I can´t because it is built-in unit . What can I do or how can I upgrad built-in units in my phone. For example the same thing do Maps if I want to upgread them.

Nevermind it works now you can delete this post

Only 23 images viewable from Share online - Nokia ...

I have uploaded a bunch of photographs(100+) from my PC onto share.ovi.com. Now when I try to see all the uploaded images using Share Online feature on my Nokia 5800, only 23 images(latest uploaded) show up under "my media". If I have to view other photographs, then I have to use browser on my phone. Is there a way to see all the images that I have uploaded using Share Online without opening browser on my 5800 xpress?
thanks,

I've managed to figure out what's wrong with this app: for all of you folks having this problem when try to upgrade Share online app to the latest version (3.0.08.23), download the correct package (SO3.0.08.23_S6031_OS_U.sis) from here: http://www.nokiausa.com/get-support-and-software/learn-how/sharing-and-blogging/download
Most of other international Nokia' sites are pointing to a wrong sis file.
Enjoy and don't forget about Kudos ;-)
Previous (starting with '99): 5110 (2 pcs.); 6110; 6150 (2 pcs.); 6210; 6310i; 6680; N70; N73; N82 Silver; N97 Transition Black; N97 mini Cherry Black; iPhone 3GS 16GB Black; iPhone 4 16GB Black; N8-00 Dark Grey; iPhone 4S 16GB Black; iPhone 5s 32GB Space Gray
Current: 808 PureView Black (Nokia Belle FP2, v113.010.1507) & iPhone 6 64GB Space Gray (iOS 8.1.2)

What does this mean? Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.

This is the error that we get when we run the Tag File.
ERROR 04/16/2004 02:26:15 PM Server ERROR from Server: National Instruments.OPCLookoutDrivers. Status: -196608, Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.
What does it all mean?

ACRE,
this looks like the Industrial Automation OPC Server (Lookout OPC) is not correctly installed or configured and therefore the DSC Tag Engine - as OPC client - cannot launch the OPC server correctly.
Two checks I have in mind.
- Installation check: Check if the Industrial Automation Server is installed and configured correctly and that you will have a .lpd file as default. Could it be that the .lpd file is corrupted? BTW - what kind of protocol are you using and did you configure aliases for the LPD object? A good resource on checking the configuration might be the online help of Industrial Automation Server (Lookout Protocol Drivers) or the link penDocument>How Do I Configure My Devices with Lookout Protocol Drivers?
- Access rights, COM/DCOM problems: Can you launch the OPC Server with another OPC client? Is your OPC server running locally? If you don't know how to check on this I found a good KB Tools for Troubleshooting OPC Interface Problems E.g. can you access it with Server Explorer?
Last question... did you encounter this problem recently while it was working before? What changes have been done on your system?
Let us know if you have some questions and I hope some of the links help you further troubleshooting this issue.
Roland

VDS fails to launch provider {CA7DE14F-5BC8-48FD-93DE-A19527B0459E}. Error code: 80072498@0200000C ( Not able to open disk management )

Hi,
This is happening on a Windows Server 2008 R2 SP1 server. When we try to open Disk Management it would stay there with a message " connecting to virtual disk service " and after a while the message changes to " Unable
to connect to Virtual disk service ".
The disk management view stays blank with no drives shown in it. And the following error is registered in System event log -- " VDS fails to launch provider {CA7DE14F-5BC8-48FD-93DE-A19527B0459E}. Error code: 80072498@0200000C "
The VDisk service is set to manual and stopped as it is supposed to be.
An application called " PI System " is installed on the server. We noticed that if we stop the " PI Application services " and reboot the server the disk management opens up fine. Has any one faced this or a similar
situation. Thanks in advance for the help :)

Hi VijayKPV,
Lets start with updating the drivers and confirm you have the latest VDS patch updated from the link.
You cannot cancel a shrink operation on a volume in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2615327
If after install above hotfix the problem still exist I suggest you ask your PI system software vendor for the further help.
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Quick Time (Audio Preferences) fails to launch with buffer overrun error

It all started a few weeks ago, after installing itunes7.0 for windows, and itunes began to annoy me (indeed drive me mad) with an error message :
"an unhandled win32 exception has occured in itunes.exe [3840]" at startup / closing immediately afterwards.
After numerous uninstall/reinstall/clean the registry/system restore attempts I managed to solve the issue-- BUT only for a few days..It failed again and so I went through the itunes support forums even found an entry
"iTunes 7 for Windows: iTunes fails to launch with an unknown error"
which suggests that my issue could be solved by :
"Open the QuickTime control panel and select the Audio tab.
In the Devices section de-select the Safe mode (waveOut only) option and click Apply."
But to my surprise, when i selected the Audio tab (and the Audio tab ONLY ) it presented me a "buffer overrun error" which indicated that the internal state of the program has been corrupt and it would be shutting down now..
It's such a nuisance..!!
Please, help, and your help will be deeply appreciated... !
I have tried to revert to the older version and it didn't work..

let's try swapping out your existing QuickTime one more time. we'll take a few additional explicit precautions this time.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Failed 'System Error'

I Have a HP LaserJet Pro P1102w printer successfully connected to the HP ePrint service.
I am able to email & print basic emails and also emails with attachements from it using any webmail service.
If I send an email from our server in work that doesn't contain an attachment - this prints off fine...
However, when an email is sent from our e-mail server in work with an attachment.. I get the notification email back to say 'ePrint job received'..but nothing prints out at the printer.
When I check in the printer activity in the HP ePrintCenter online.. it always displays the status as 'Failed - System Error'
Anyone any ideas why this could be?
Thank you!!

Also getting this. How do I get details on what's causing the issue? Can anyone help debug? Need email headers?

Share online fails to launch: "system error" 5800

Similar Messages

Maybe you are looking for