Share only one screen in iMessages

I often screen share with colleagues, but they have two monitors and this makes the screen of relevance very small on my screen.
Is there any way to share just one of the screens  in iMessages? Skype, for example, gives the monitor to share as an option.

Thank you digitaldog, I didn't think so either

Similar Messages

  • How can I unsplit my mozilla screen? I want to see only one screen at a time!

    When I open mozilla only one screen shows up. Then when I open another website from my bookmarks mozilla all of the sudden split the screen into one website and then icloud. Very frustrating. Any help would be appreciated.

    I've called the big guys to help you. Good luck.
    In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    Thank you!

  • Unwanted screen heading(Tab) in a screen set having only one screen.

    Hello Experts,
    We are at the initial phase of go live of SAP Work Manger-6.0 for one of our client.
    We found one strange behaviour as mentioned below.
    We have one screen set(at bottom),which is part of a tile view(contains two screen sets), The screen set at bottom contains only one platform(Ipad) and only one detail screen(buttons at the bottom of the screen).
    It works perfectly fine but sometimes the look and feel gets distorted, which causes an issue to the end users.
    I mean, some times the screen appears as a tab with a black row and a blank yellow box(as highlighted in red in the 2nd screen). Which reduces the size of the screen and hence the buttons become very small in size.
    Details :-
    SMP Server-2.3 SP05
    SAP Work Manger-6.0
    Agentry Client-6.1.5.49 (WPF)
    PFA screen shots for both the cases.
    1.  expected look and feel.
    2.     Unwanted look and feel.
    We need your expert advice to resolve this issue, Please help!!
    Thanks,
    Sudhir.

    Thank you so much Bill!!
    This setting is already there.
    PFA screen shot of the same setting in Agentry.
    Please suggest, If you are referring any thing else.
    Thanks,
    Sudhir.

  • When two screens are open, how do I close only one screen?

    When the site opens screen A sometimes has user open screen B. When user finishes screen B and desires to return to screen A, the x in the upper right corner is chosen, a message appears you are about to close 2 screens however user only wants screen B to close. I cannot find a way to close only screen B. How do I close only screen B?

    Hi:
    When you talk about ''screen A and screen B'', are you referring to tabs on the top of your screen in Firefox? Because to close those, you:
    # click on the tab
    # while in the tab, go to the top of it at the top of your screen
    # hover over it
    # you shoould now see an "x" at the rightmost side of the tab. Now click on that to only close that tab.
    Were you referring to that? Thanks for your patience!

  • VNC: How can I share only one desktop screen on mac os when I created multi desktop?

    I created multi desktop, and opened different applications on each desktop.
    I'd like to allow a user to access to only secondary desktop not main screen.
    How can I allow VNC user to access only to specific desktop?

    Ahh,
    Just the App not the support folder I'll be bound.
    8:23 PM Wednesday; August 15, 2007

  • TS2755 why is it that imessage is not working for only one of my imessage/iphone user??

    One specific person that i been sending imessages to all of the sudden only send as regular text messages but all other iphone/imessage user sends correctly y is that?

    On the iPhone that can't send or receive iMessages, make sure iMessage is On in Settings > Message.
    Also, try the tips in this Apple doc -> iOS: Troubleshooting Messages
    If you still can't send or receive iMessages
    To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
    iOS: Troubleshooting Wi-Fi networks and connections
    iOS: Troubleshooting cellular data
    Ensure that iMessage is turned on in Settings > Messages.
    iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
    If iMessage is unavailable either on the sending or receiving device, SMS will be used. You can turn this on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
    Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
    Note: To receive iMessages sent to your phone number on your iPad, iPod touch, or Mac, you must meet the following requirements:
    iPad or iPod touch using iOS 6 or a Mac using OS X 10.8.2.
    Verify that you are signed in to your Apple ID account on Settings > Messages > Send & Receive.

  • Separate only one screen on mission control?

    Is there a way to seperate just 1 of my screens from the rest in Maverick? I have 4 screens. 3 monitors are essential meant to be one large work area. I will often use a program with a canvas spread across 2 screens and one for control panels. My 4th screen is a 140" projection monitor on the other side of the room. I would love to separate ONLY the projection monitor. I can then use this monitor to watch movies on etc, and not have it effected when im switching between desktops on my other 3 screens. Seperating them all creates a huge workflow problem since i use the other 3 as one large chunk of real estate and dont want them seperated at all.
    Any options here???
    -Devin

    No one has any idea how to do this?

  • IE8 plugin opens only one screen

    Hello,
    i'm having the next problem, i've got two citrix farms in one farm, when we start in ie8 we open a main application, it displays several links to pdf files. each file should open in a seperate window. On one citrix farm it's  possible to do so, and on the other it isnot possible there adobe opens every pdf in the same window. the verions of IE are the same the only diffrence is that the working one is adobe 9.1 and the not working is 9.3.
    help would be very appriciated
    thanks
    Will Simons

    I have never tried modding the Firefox window maximized to dual screen. But simply enough to let your Firefox displayed in both screen, you can minimize the Firefox window and just drag it across the next screen. Therefore you can let the browser displayed in both screen but not maximized.

  • Dual screen : shutdown only one screen

    Hi everybody !
    First thing, please excuse me if my english isn't very good.
    I've got an iMac Core 2 Duo 2.16 GHz with 20" screen, and a videoprojector as a second monitor.
    I would like to totally shutdown the iMac scree when, for example, I'm watching a movie on the videoprojector.
    But I don't know how to do it... and I don't even know if it's possible.
    With "DVD Player", there is an option to have the other screen all in black... but I can still see the iMac sreen isn't shutdown (it's not totally black).
    I tried LightMe, but it shutdown both of the screens.
    So, do you knwo what could I do ? Except put something on the iMac to hide its screen.
    Thanks.

    There is not a way to turn off the iMac monitor screen. This has been asked a number of times before and no one has figured it out yet. I just cover up my screen with an acmemade screen cover made specifically for the iMac. They put vents in the cover to prevent heat build up.
    Glor

  • How to darken only one screen in a dual screen setup ??

    Hi All,
    I have a dual screen set-up probably like many of you and sometimes I prefer to use LR only on 1 screen. That allows me to work on Photoshop or read my emails or whatever else I'd prefer to do on the other screen. My dilemma is when in Lightroom & I press the letter L to darken the screen around my image, for better viewing, it also darkens the other screen that I'm working with. Is there a way to prevent both screens from darkening?? Thanks Ron
    PS: Apologies if this has been addressed previously as I could not locate it

    Thank you digitaldog, I didn't think so either

  • Cisco Profile 52/55 Dual - displays video on only one screen after software upgrade 7.1.4

    Hi,
    I've upgraded the Profile 52/55 Dual system to TC 7.1.4 and it no longer shows video on both screens during a conference. It displays content on the second screen fine. It worked in version 6 so I wonder if something changed in the software or the endpoint requires some additional configuration.
    I've checked settings under Configuration > System Configuration > Video > Monitors and it's set to Dual. I've changed it few times and set it back to Dual but this didn't resolve the issue. I can't see any dual screen option key added under system information but I assume it has a dual screen option hence it's a dual screen system.
    Do I need to change any settings?

    Hi Patrick
    Thank you very much for your response.
    The system doesn’t have a remote control as such, it’s an MX700 so it has the 10inch touch panel, I had some engineers onsite attempting to bring the self-view image up using the panel but the only image that they managed to retrieve was a self-view PIP on the main image.
    If I change the self-view settings in the configuration nothing appears to happen on the codec, the second monitor will only display the presentation, it’s as if the system is stuck in dual screen presentation only, even though when I set the system to dual screen, flick it back to single screen, set it to dual screen, back to the same situation no image unless there is a presentation being sent.
    I have ensured that these settings are forced on the system
    xconfig Video Monitors: Dual
    xconfig Video CamCtrlPip CallSetup Mode: Off
    xconfig Video SelfviewDefault Mode: Off
    xconfig Video SelfviewDefault OnMonitorRole: Second
    xconfig Video SelfviewDefault FullscreenMode: On
    But no matter what I do I am unable to get the behaviour that I expect, this is why I have posted on this forum, I seem to think that the problem may be related to a software bug, however I am unable to downgrade as that would stop the control panel from working (this system doesn’t have a remote), and I see no mention of a second monitor issue reading the release notes, I have checked the online bugs and cannot find anything there either. so I am wondering if someone in Cisco has any idea as to what is happening here.
    I thought about trying to use TC console to see if I could force a layout via this tool / or at least see what layouts are on the system, however the TC console version 6 will not connect to this system (I think this is more firewall related than system, as standard telnet and ssh attempts fail also).
    Again I appreciate any and all assistance provided greatly, I am completely baffled as to what is happening here.
    Cheers

  • Two different Icloud accounts but want to share only one?

    Hello everyone,
    Alright, I just swiched to the new iphone, so i put everything from my old phone to my new phone. BUT here is the problem, i cant access the familys icloud account. they all have the same one, but i am stuck with one odd one:/. so now i want to switch mines to the one everybody in my family has, but it wont let me ;l. how would i be able to switch it? thank you sooooo much!!!!

    To change iCloud accounts on your phone, go to Settings>iCloud, tap Delete Account, provide the password when prompted, then sign back in with the family account ID.  If all your data is already in the family iCloud account, choose Delete from My iPhone when prompted after deleting the existing account.

  • How to Open multiple form with only one screen painter file

    Hi all ,
    I want to reopen the form without closing the active form ,i want to use same srf file ..
    I have already try it but form already exist error occur .
    pl help me , how to do it ?
    how to open multiple form with same srf file without closing active forms .
    thanks in advance,
    msw

    <?xml version="1.0" encoding="utf-16" ?>
    <Application>
      <forms>
        <action type="add">
          <form appformnumber="-1" FormType="-1" type="0" BorderStyle="0" uid="BOE" title="Bill of Entry" visible="1" default_button="1" pane="0" color="0" left="365" top="62" width="801" height="410" client_width="785" client_height="372" AutoManaged="1" SupportedModes="15" ObjectType="">
            <datasources>
              <dbdatasources>
                <action type="add">            
                </action>
              </dbdatasources>
              <userdatasources>
                <action type="add"/>
              </userdatasources>
            </datasources>
            <Menus>
              <action type="enable">
                <Menu uid="1282"/>
              </action>
              <action type="disable">
                <Menu uid="5890"/>
              </action>
            </Menus>
            <items>
            </items>
            <ChooseFromListCollection>
              <action type="add">
                <ChooseFromList UniqueID="-1" ObjectType="-1" MultiSelection="0" IsSystem="1"/>          
              </action>
            </ChooseFromListCollection>
            <DataBrowser/>
            <Settings Enabled="0" MatrixUID="" EnableRowFormat="1"/>
          </form>
          <form appformnumber="-1" FormType="-1" type="0" BorderStyle="0" uid="BOE1" title="Bill of Entry" visible="1" default_button="1" pane="0" color="0" left="365" top="62" width="801" height="410" client_width="785" client_height="372" AutoManaged="1" SupportedModes="15" ObjectType="">
            <datasources>
              <dbdatasources>
                <action type="add">
                </action>
              </dbdatasources>
              <userdatasources>
                <action type="add"/>
              </userdatasources>
            </datasources>
            <Menus>
              <action type="enable">
                <Menu uid="1282"/>
              </action>
              <action type="disable">
                <Menu uid="5890"/>
              </action>
            </Menus>
            <items>
            </items>
            <ChooseFromListCollection>
              <action type="add">
                <ChooseFromList UniqueID="-1" ObjectType="-1" MultiSelection="0" IsSystem="1"/>
              </action>
            </ChooseFromListCollection>
            <DataBrowser/>
            <Settings Enabled="0" MatrixUID="" EnableRowFormat="1"/>
          </form>
        </action>
      </forms>
    </Application>

  • X11 dual head - want to get window manager (gnome) on one screen only

    What I want sounds simple, but I just can't get it done... Hope anyone is able to help me!
    What I've got:
    Four monitors (two at each of my nVidia graphic cards). Both devices are configured using nVidia's Twinview, giving me two virtual screens (:0.0 and :0.1).
    I can use xinerama to get one huge desktop, but this doesn't work well, as the borders between two screens of the same device are no longer recognized in this case, causing windows to always span over two monitors on maximization.
    I can also not use xinerama, giving me two independant gnome session.
    What I want:
    I want gnome to only start on one screen (i.e. two monitors), leaving the other screen blank but available. They don't need a WM as they will run nothing but a fullscreen mplayer or an xterm that will periodically output some stuff. I actually don't even need input devices for the second screen and it would be good if the mouse was restricted to the gnome-screen.
    However, I didn't manage to make gnome start on only one screen. I don't care if it's done using one xsever with two screens attached or if I can do it starting a second xserver, I just want it resolved in some way.
    I've tried to restrict gnome to :0.0 by setting the DISPLAY variable or giving gnome-sessions --display option. Both to no avail. When trying to start a second xsever (different layouts, each using one of the screens), my original screen becomes all white and on the second screen nothing happens. Any ideas?

    What I want sounds simple, but I just can't get it done... Hope anyone is able to help me!
    What I've got:
    Four monitors (two at each of my nVidia graphic cards). Both devices are configured using nVidia's Twinview, giving me two virtual screens (:0.0 and :0.1).
    I can use xinerama to get one huge desktop, but this doesn't work well, as the borders between two screens of the same device are no longer recognized in this case, causing windows to always span over two monitors on maximization.
    I can also not use xinerama, giving me two independant gnome session.
    What I want:
    I want gnome to only start on one screen (i.e. two monitors), leaving the other screen blank but available. They don't need a WM as they will run nothing but a fullscreen mplayer or an xterm that will periodically output some stuff. I actually don't even need input devices for the second screen and it would be good if the mouse was restricted to the gnome-screen.
    However, I didn't manage to make gnome start on only one screen. I don't care if it's done using one xsever with two screens attached or if I can do it starting a second xserver, I just want it resolved in some way.
    I've tried to restrict gnome to :0.0 by setting the DISPLAY variable or giving gnome-sessions --display option. Both to no avail. When trying to start a second xsever (different layouts, each using one of the screens), my original screen becomes all white and on the second screen nothing happens. Any ideas?

  • Sharing only one calendar in ICAL

    I have several calendars set up in my ICAL. I want to share only one via email but when I try the file gives access to all of my calendars. How do I provide access to one not all?
    Thanks

    I bought and have used BusySync with great success http://www.busymac.com/
    My only caveat is that I've had problems recently that are probably due to the fact I've also installed Appigo Sync, and with syncing via MobileMe I may have had too many cooks in the kitchen.
    Good luck!

Maybe you are looking for