Share operation dvd has failed QuickTime error 0

My 44 minutes long project in Final Cut Pro 10.0.9 project fails with a message: "Share operation DVD has failed, QuickTime Error: 0". I use OSX 10.9.
Yesterday, I rectified the situation by rebooting the system and starting to "share" again. To-day made a few extra corrections here and there but  nothing simple works. I even removed the background photo from the DVD opening menu but no success :-((
Ross's earlier advice on this forum was:
"Select a short section of your project and export as a Pro Res master file.
If that also fails, turn off BG Rendering; delete project render files; copy the entire Timeline to a new project.
Russ"
Could you please be more specific. I am a novice to FCP.
1.How to select a short section ? Select 4-5 frames (yellow band) from the timeline ?
2. How to _export_ as a ProRes file ? From File > Share > Master File (default) ? (Or if it has to be an "export" perhaps File >Export XML ?)
3. How and where to turn off BC Rendering ?
4. How to delete project render files ?    File > "Delete Project Redner Files" is not highlighted in the File menu, so how to select this action ?
5. How to copy the entire Timeline into a new project ?  File >New Project ? Then select the whole of the old timeline, copy > paste into the new timeline ? Or a different method ?
I think that it is better to ask even some simple (for experts) questions  ? :-)
Many thanks,
Kris

1) Either use the Range tool or set in and out points on the Timeline.
2) Either way will work. For example, Share>Master File and choose Pro Res in the Settings>Video Codec field.
3) Background Rendering can be turned off in Preferences.
4) Select the project in the Project Library first.
5) Create a new project with settings to be determined automatically by first clip. In the original project, Command-A and then Command-C. Open the new project, click in the Timeline window to activate and hit Command-V.
Good luck.
Russ

Similar Messages

  • HT201197 how do i fix this (the share operation DVD has failed Quicktime error 0

    Ho w do i fix this - The share operation DVD has failed Quicktime error 0

    Select a short section of your project and export as a Pro Res master file.
    If that also fails, turn off BG Rendering; delete project render files; copy the entire Timeline to a new project.
    Russ

  • Share Operation DVD Has Failed

    I have a project on Final Cut Pro X that is close to 90 minutes long. It consists of several 5 minute video clips. When I try to share the project to DVD it gets about 33% done when I get this error -
    The share operation "DVD" has failed.
    The operation couldn't be completed.
    (com.apple.Compressor.CompressorKit.ErrorDomain
    error-1.)
    I am running
    Final Cut Pro X (10.1.4)
    OS X Yosemite (10.10.1)
    Any help would be greatly appreciated.
    Paul

    If the clips are native media, try optimizing them.
    Russ

  • When I "share" to DVD the file is transcoded.  When it reaches 66% it starts to "finishing", but the process stops and does not proceed beyond 66%.  When I stop the sharing process I receive the following message "the share operation dvd has failed".

    When I "share: to DVD the file is transcoded.  When the sharing process gets to 66%, it changes to "finishing" "CreateDVD:waiting fro create disk to finish.  The sharing process does no go beyond 66%, and when I stop the sharing process, I receive the message "the share DVD operation has failed."
    Is this a problem with FCPX or Create DVD?  How can this problem be resolved?

    The handshake between FCP and a hidden app called Create Disk wasn't completed.
    Try this. Select a short range and Share>DVD. In Output Settings. set it to Hard Drive to save as a disk image. (Save to your Desktop so you can find it.) For menu Background, click the Add button, then cancel. That is often enough to wake up the disk burning part of this process. If it makes a disk image, try a physical disk.
    Russ

  • The share operation "DVD" has failed

    I have tried everything I know for the past two days to finish this project but I keep getting the following error:
    the operation could not be completed because an error occurred when creating frame 9801 (error -1).
    The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.
    ANY IDEA WHAT  NEED TO DO DIFFERENTLY? SOS

    What version of FCP are you running? If i's not current, update it.
    Russ

  • The share operation Blu- ray has failed. quicktime Error: 0

    the share operation Blu- ray has failed. quicktime Error: 0 anyone any idea how i overcome this ?

    Are you working with native media? If you are, see if Final Cut will let you transcode a clip to Pro Res 422. Do an export test with that single clip. (Write the output to a disk image so you don't waste a disk.)
    Russ

  • How to fix: the share operation master file has failed quicktime error: -50

    So Whenever i export my HD 1080p file in FCPX 10.0.8 i get this error "the share operation master file has failed quicktime error: -50"
    Please help!!!!
    It happens about 12% of the way in. My movie is only 10 minutes long.

    Download it. Quit FCPX. select FCPX in this tool and and click on trash. Restart FCPX and try again to export. Empty trash. It will do no harm but you have to set your settings in preferences in FCPX after that. Every application has preferences files and they can become corrupt. FCPX will build new fresh preferences after you open it.

  • Error when Share to File "The share operation 'File' has failed. Cannot create file."

    Upgraded to Mavericks and the new iMovie. Imported a video from iPhone 5 to edit, and then tried to Share File.
    Error every time, it says that "The share operation 'File' has failed. Cannot create file." It does not give any error number that would help figuring out the problem.
    Late 2011 MacBookPro with 8 GB and over 150 GB free on HD.
    Imported several other videos from various sources, and always the same result when trying to Share to File.
    Any ideas?
    Thanks.

    I'm having the same problem with a 2012 Macbook Pro 15" Retina; iMovie version 10.0.3. I'm not sure why either. It was working fine until one day it quit exporting to file at all.

  • The share operation youtube has failed

    Hi. I need the help, Im not work long with final cut Pro 10.0.8 b at haw prob lem with share to dvd DL. after share its stop on 49%, and sad
    The share operation youtube has failed   Quick time erroe: 0
    Is any one can help option how to share to DVD  or ?
    Thanks.

    I had this problem and tried evry thing on the thread "Sharing to DVD all my projects stops att 66 % - without error messages." (https://discussions.apple.com/thread/4966745) but the thing that fianlly fixed it for me was your suggestion about kewords - I removed the one keyword I had and the share to DVD finally completed.  Oddly though other projects with the same keyword (which FYI was P2P) all burnt to DVD fine... Anyway thanks canoel!

  • The Share Operation has failed: QuickTime Error: -50

    I just updated to FCP X 10.0.8 and all of the sudden I am getting share errors when I attempt to export.  I have tried sharing to youtube and sharing for apple devices at 1280px X 720px using H.264 codec.  Each time I get a quicktime error: -50.
    I am editing on a Mac Mini 2.7 GHZ Intel i7.  8GB memmory OS 10.8.3.  The video files are AVCHD 1920x1080 24fps and live on an external 6 tb GTech Raid external hard drive.
    So far, I have tried deleting both my project file's render files and event render files.  I have copied the project to a new project and re-rendered.  Each time, I am seeing that several tiny little segments are showing as un-rendered (orange bars above clip on timeline).   I'm guessing that this might have something to do with the error?
    I am not using any images and the music I am using is an AIFF file.  I re-timed some of the clips for slow motion.
    When I try to share as "export file" > Video and Audio > Apple Pro Res 422 at 1920 x 1080 I get "The share operation Export File has failed" The operation could not be completed because an error occurred when creating frame 1403 (error - 1).  But I'm not sure how to view frame numbers.
    Any help would be appreciated.  Thank you.

    I've tried deleting all the render files several times and it doesn't work. 
    Interestingly enough, when I copy the bad clips individually to a new project and then export them, they export just fine.  They do not have the weird orange render bars. 
    Check out this link to see a screenshot of my timeline.
    I'm not sure if my clips are optimized.  My import preferences have the "create optimized media" checkbox checked, but when I actually imported the files, I did not check the "create optimized media" checkbox.  Although, on my hard drive there is a folder for transcoded media > high quality media and it has some clips in there, including the bad clips.  So I guess it created optimized media?  Is there another way to tell if a clip has been optimized.
    Here is a screenshot of my preferences.
    Here are my project properties.

  • The Share Operation Export File has failed QuickTime Error -50

    Hi, i've been trying 6 times or more to export a file from FCPX. I have done this many times but now it's failing with the above error.  I have nearly 300GB of space on my drive.  Any solutions? 

    This video had something like 30 powerpoint slides (jpegs) added and this is obviously a problem because as soon as i removed them it worked fine.  Not sure what the limit is but will have to experiment. thanks for your help.

  • Compressor error - Failed:  Quicktime error 0

    I'm sending my FCP sequence directly to Compressor and I'm getting this message after I submit:  "Failed:  Quicktime error 0".  It's a 34 minute sequence.  I'm using DVD Best Quality - 90 Minutes as my setting.  I've googled this error and I'm seeing some folks suggest that there may be a corrupt file in the FCP sequence.  Others say that it may be an insufficient RAM issue (not my issue).  My questions:
    -  Has anyone seen this before?  If so, how did you resolve?
    -  If this is due to a corrupt file, how would I go about finding that corrupt file?
    Any help would be appreciated.  I'm up against a deadline about to get into panic mode.  thanks!

    Michael,
                Try cutting your sequence into ten minute segments to narrow down the problem, if indeed it is a corrupt clip or file.
    You may also want to post your sequence settings, also do you have any stills in your timeline, if you do are they in RGB color space and not CYMK
    DM

  • Failed: quicktime error -50

    I tried to share sending to apple tv and also used compressor for H.264 for apple tv and i keep getting a failed: quicktime error -50 ... i also tried to use compressor and make it a fast encode dvd and im getting errors also cannot figure out what is going wrong .. this is a somewhat short video 12min i am using fcp 7.0 on MP quad 2.66ghz , 12gb ram osx 10.5.8 and i have QT 7.6.2
    help i need to get this project out ASAP
    thx

    -50 paramErr Error in user parameter list.
    This is a File System error. Check the integrity of your drives using Disk Utility > Verify Disk.
    Post any messages that Disk Utility presents to you, here. Copy the text exactly.
    Also post how much free space is available on the drives.

  • Mpeg4 compression failed (QuickTime Error: -50)

    I was trying to compress this 3 minute long clip using "MPEG-4 Improved NTSC Small Progressive" setting but it always failed, and in the log/history i always find the following status:
    Failed: QuickTime Error: -50
    I have tried another MPEG4 configuration, and some seems to work (NTSC for CD) and some don't (NTSC for fast cable streaming, NTSC Large Progressive). Has anyone experienced this before? Any help or advice? Here is my configuration:
    Compressor 1.2.1
    Final Cut Pro 4.5
    QuickTime 7

    The latest version of QuickTime is 7.0.2 and you'll also want to update to the latest Pro Apps support package (link follows for Mac OS X 10.4.X):
    http://www.apple.com/support/downloads/proapplicationsupport30macosx104.html
    You may already be up to date and even if not this may not solve your problem, but it would be a first step before trying other things.

  • SYSTEM ERROR: An accept of a new connection has failed: OS Error 4:

    hi,
    Iam using forte.Iam getting this error Can anyone help me out from this error..!!
    SYSTEM ERROR: An accept of a new connection has failed: OS Error 4:
    Interrupted system call
    Class: qqsp_RemoteAccessException
    Error #: [501, 236]
    Detected at: qqcm_ExternalConnection::AcceptConnections at 1
    Last TOOL statement: method EXEProtocolManager.Listen
    waiting for your valuable reply

    Hi Suresh
    Give more details abot your OS. Can you share the source in EXEProtocolManager.Listen method?
    GS
    Iam using forte.Iam getting this error Can anyone
    help me out from this error..!!
    SYSTEM ERROR: An accept of a new connection has
    failed: OS Error 4:
    Interrupted system call
    Class: qqsp_RemoteAccessException
    Error #: [501, 236]
    Detected at:
    qqcm_ExternalConnection::AcceptConnections at 1
    Last TOOL statement: method
    EXEProtocolManager.Listen
    waiting for your valuable reply

Maybe you are looking for

  • Relative paths for images upset by forwarding requests

    Hello World.           I am using a web app deployed in Weblogic 5.1 with service pack 8.           I have hit a problem which puzzles me. When I forward a request from           one JSP to another (say from A to B) the web server seems to take the  

  • Create purchase order from purchse requisition number

    Hi guru's, I have a requirement that when ever i m creating the sales order through va01 and when i will click on save button it has to create an automatic PO from the PR number which will be there in the order. Functional consultant saying that he c

  • From AVI to FLV for Flash MX Professional 2004

    Hi there... Let me thank you for your attention... This is my issue, I had this Flash MX 2004 Professional when I bought my PC, since then , 6 years ago, I learned how to use it, and recently got a little proyect which turned out to be something very

  • System error in program SAPLRRK0 and....Value '_' of characteristic 0EMP...

    Folks, We are using ESS/MSS business packages for integration with BW backend, on trying to access status report using, Manager Self - Service --> Reports --> Development Discussion Status Reports We are getting the following warning & error messages

  • When is Apple fixing iTunes version 11.1.4 ?

    11.1.4 doesn't work. I have 6 PCs, (Vista and 7) that all failed to update with 11.1.4. The posted workaround takes too much time and doesn't always work.