Share selected clips will not function correctly

I have a very large iMovie with a lot of clips, each of which contains several chapter stops. If I share only selected clips to iDVD, the chapter stops are scrambled and don't correspond to where they should do. Why is this?

I'll venture a deduction. Since chapter markers (and other edits) are stored as reference points in a master document, if the underlying sequence is disturbed there may be unexpected consequences. For example, if you had a chapter marker at the one minute mark of a movie and then removed 30 seconds clip, then the one minute chapter marker may wind up at the old 1:30 mark.
If you have Quicktime Pro, you could Share/Export the iMovie as a Full-Quality Quicktime file, then all the chapter markers will export in the correct location, and you can use Quicktime Pro to cut out sections as desired. I'm guessing the chapter markers will still be okay because they've been added to the timeline in the Export process.
John

Similar Messages

Itunes will not function correctly

Itunes will not function properly. I keep getting errors installing and getting itunes to connect with my iphone.

First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
Have you repaired permissions with Disk Utility?
Is your Quicktime up to date? At least version v7.1.5.
MJ

Using lion 10.7.4, can`t login as administrator or root (both enabled) at login screen. it shows other but when selected it will not accept correct entry.

using lion 10.7.4, can`t login at login screen as administrator or root user, both properly enabled. the option other will not take the proper entry. it will accept the standard user login.

Try resetting administrator password or resetting home folder ACL's for root user.

Photoshop CS will not function correctly

I recently upgraded to Leopard. I installed all my software ie (word, toast, photoshop cs...) Photoshop CS is able to install, but once I open it to use it a window pops up saying something like : Unable to open...because there are files not found in folder required to open program. Please reinstall ps cs to recover these files..." I reinstalled it and the window still pops up. Help!

I installed Leopard a couple weeks ago and I run Photoshop CS fine.
I didnt do a clean install, I just did a straight upgrade and left everything installed. The Adobe apps continued to function just as in Tiger, with no probs at all.
I know it would be a bore but if you still have problems, try reinstalling Tiger, then install CS, then do a straight upgrade to Leopard. By doing the fresh install of Tiger you would have the benefits of a clean install while still retaining the Leopard upgrade...
Not the best option probably but cheaper than CS3!

IPhone 4 vibration, wifi, and calling will not function correctly?

I have had my iPhone 4 for 6 months now, and I have dropped it a couple of times, but a few days after I dropped it nothing happened. My first problem started in May when I noticed that my phone could not reach the wifi at home or other places quickly as it normally could and when I would go into other rooms I would lose the connection quickly.This made me have to use my 3g more often and I only have a limit of 300MB, I normally do not use it, because of the wifi i have around,but it is getting harder. 2-3 days ago I called the DATA (*3282#) in my phone and got 64.89 out of 300MB. I later used my 3G for awhile, so a day later i called DATA and the same number (64.89 out of 300MB) comes on again. I knew this was a mistake so I called it again and the same number shows up. I KNOW FOR SURE I USED MY 3G, so I dont know why this keeps popping up. Everything else channged (texting and calling) On top of that my vibration started to not work in early June and it's difficult for me to know when someone has texted or called. I have tried going into settings and choosing a different type of vibration, but it does not vibrate overall and yes it is turned on. My version right now is 6.1. Will upgrading help? Everything else works fine, but is there a way I can fix this or do I have to go the Apple Store? I'm also in AT&T.

For the data usage,
I have AT&T as well and I found that the Data usage only updates about once a day even though texting updated instantly.
As for the vibration,
The vibration motor thing may be broken.
But I am not sure.

Online video clips do not play correctly on all browsers

I am unable to play video clips at the right speed without them stalling and stuttering. For example, a typical YouTube clip will not play correctly, so the video will stutter and the sound won't play in time with the video.
This is especially frustrating when wanting to play music video clips as the song will stutter. This happens regardless of browser - Firefox, Safari or Netscape.
I have a broadband Internet connection but wonder whether I need to adjust speed settings somewhere so sound and music play correctly.
I have no problems playing songs via iTunes or watching video clips using Quicktime, it's just the embedded video clips on YouTube etc that won't play correctly.
Any advice much appreciated.
Thanks,
Rob

Flash video is very CPU intensive, open activity monitor and look at your CPU usage while trying to watch a YouTube video, no doubt it is at 100%.
Unfortunately there isn't much you can do about this - my 400 Mhz G3 can't handle flash video and by the look of some previous posts on the forum I'd be surprised if any can .

Share selected clips only button not enabled for videocamera

iMovie HD 06. I have 3 adjacent, no transitions clips from one iMovie that I am trying to "share" back to the video camera (I had manipulated/extracted and added audio effects to these 3 clips, which don't cut and paste from existing iMovie to a new project) plan was to share to tape, then reimport from tape back to a different iMovie (to at least get the audio back). Unfortunately the "share selected clips only" button is never enabled. Really don't want to share entire movie. Any ideas?

Well that would make too much sense! iLife 05 Quicktime did not maintain widescreen so I was not keen on trying, but (as you probably knew) iLife '06 quicktime is a nicer beast. Actually went into Apple Store and turned out that,more or less, a combination of forum suggestions........WORKED! So to others that have not been able to cut and paste clips that have had audio extracted, etc.with iLife '06: put playhead a bit before your targeted consecutive clips, click and drag from below the audio tracks upwards and to the end of the target. File, Export, Quicktime, Full Quality, Share. Pick your location to share to. And there you go. Then open a new/existing project, Import (find your desired clips), Open. Your clips with audio, special effects all import without a hitch.
Have you tried it?
iMac G5 Mac OS X (10.4.5)

"ChnCFCFiltCalc" in Crash option not functioning correctly

It appears that the "EndPoints" option for the "ChnCFCFiltCalc" command is not functioning correctly. It does not seem to be reflecting the points to pad the data at the beginning and end of the signal. This is based on the results of filtering done with and without the option activated. Not activating the option appears to reflect the data and you get the results you would expect to see with the option activated. Activating the option give you results you would expect to see without the option activated.
I am using Version 8.0.981
This was functioning correctly in previous versions. Can you tell me when the "EndPoints" option stopped functioning correctly? I assume it was with Version 8.0. Is it correc
ted in Version 8.1?

Hi,
The parameter "CFCPREEVENTTYPE" is an enumeration variable with the selection "EndPoints" or "ZeroMagnitude" and not is optional.
Every mathematical function in DIAdem represents their parameters in global variables - eg. "CFCPREEVENTTYPE" as one parameter of the function "ChnCFCFiltCalc".
If you now call a function in a VBScript you have two possibilities
a) call the function with parameters like ChnCFCFiltCalc(X, Y, E, CFCFiltType, 0,"EndPoints")
b) call the function without parameters like ChnCFCFiltCalc
In case b) DIAdem will use the current content of the global parameter variable.
Maybe that this is you problem.
Kind regards
Walter

Cintiq tablet will not work correctly with windows

I am using photoshop CS6 on a 64 bit windows system and my Cintiq 12 will not function with the pressure sensitivity. any suggestions to correct this?

Hi. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop. I'm moving your question to the Photoshop General Discussion forum for specialized attention to your situation.

Components will not resize correctly in Catalyst

Download PSD: http://dl.dropbox.com/u/814249/campusariel.psd
Download FXP: http://dl.dropbox.com/u/814249/campusariel.fxp
I am completely new to Flash Catalyst (any and all versions). I am currently using Photoshop CS5.5 to design and Catalyst 5.5 to import and translate into a flash project. I recently picked up a job creating an interactive application for a college campus. I have attached my two project files for anyone who can help to view to see what is wrong. I have also attached inline screenies for those who cannot/will not download.
Here is my problem: I created the attached PSD in Photoshop with what I thought were the correct layers and groups/folders. I am hoping to achieve the following effect: when a user rolls over the purple buttons, multiple similar copies of that button that are initially hidden beneath the visible one popup in sequence above the rolled over purple button.
Ex. State 1:
Animation/Action Sequence to the following:
The purple popup objects will have their own text content and will be buttons themselves that a user clicks to change to a different state with more specific information.
Not only am I unsure of how to create such animation/action sequence, my purple components (whether I actually convert them to components in Catalyst or not) will not resize correctly. NOTE: I did click the resizable option when importing the PSD into Catalyst. The following effect occurs both ways. I add constraints to all objects by selecting all, right clicking, and choosing add constraints to all; the following occurs when stretched inwards using the resize test handle:
and this when stretched out:
When viewed using CTRL+Enter, the application is nowhere near resized in the browser window. I must be missing something, especially being new to Catalyst. I tried flattening the image in Photoshop, which obviously allowed the image to be easily resizable in Catalyst and the test browser window. However, I cannot use my separate elements when flattened; flattening defeats the purpose of Catalyst if I'm not mistaken.
Any guidance?
Message was edited by: joshlev

Hi Martin - Those are really good questions! I did check and the image is uploaded. I assume I can see the image in my one browser because of the cache since I could not see it on several computers that I had never pulled the site up on before.
And actually I have it working now. Nancy had a good idea to check to see if I saved it as CMYK instead of RGB. When I went to go open the file on my computer Photoshop and Fireworks had an error in opening it. They had a problem opening the one I downloaded from the ftp too. It just looks like somehow the file became corrupted! Not sure how, but that seems like what the problem was since I have a new image up there now and it's working fine again.
Thanks for all your help!
Liz

I believe my firefox is viewing some websites on my laptop in formats that are used for cellular devices. Sites like facebook, sports illustrated, yahoo are not functioning correctly but certain sites work fine.

sits such as facebook, yahoo, and sports illustrated do not function correctly on firefox but they do on my internet explorer. I believes its somehow set itself into the same format used for cellular devices... My JSU.edu page says somethin about it being in (portal mode). It is also a different format now that normal.

Hi @TheBigGiggle ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY TouchSmart 17 Notebook PC and a keys not functioning correctly. Here is a document on cleaning the keyboard.
I would start with air on the keys as sometimes debris can cause this issue.
Here is a link to uninstall the keyboard. In the device manager have you uninstall all that is listed in keyboards, restart the computer after uninstalling, it should reinstall automatically and resolve any issues with the keyboard.
Here is a link to keyboard troubleshooting.
Here is a fix from Microsoft that might help.
Let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

N96 Telephone Service Not Functioning Correctly

Good evening folks,
Now, I've had this problem for as long as I've had an N96. TWO N96's in fact, as my first was replaced by Nokia due to the screen-slide connection malfunctioning. Both have been fully firmware updated and restored on multiple occasions in an attempt to fix the problem.
The telephone service on the handset has the habit of not functioning correctly, like the service has hanged or just doesn't respond.
For example, I find a contacts name in contacts, press the green key to show their contact numbers, and green again on the number I wish to call- nothing happens, other than the available numbers disappear and you return to the regular contacts view. This is what would normally happen anyway, only you'd have an outgoing call happening over it and showing the "telephone" screen.
Or, example two, in a text message I chose Options > Call > Voice Call and press the select or middle button to initiate the call- No call, instead the options dialogue disappears and I return to the standard message view. Again, I should be in an outgoing call, not viewing my text message.
Example three, to really show the telephone service isn't working;
I'm in full signal, text messages are functioning correctly and the mobile web is working flawlessly. A friend sat next to me rings me and is immediately directed to my voicemail, not a single indication from the handset that I may have been receiving a call.
Seconds later I receive a text message from my operator to let me know about a new voicemail my friend just left me.
So, the telephone service isn't functioning as it should be.
A quick restart fixes the problem in 4 out of 5 cases, however usually within 24 hours the problem is persisting again.
Not being able to make outgoing calls isn't a problem, because at least then I know the telephone service has failed on me and I can restart.
A potentially important incoming call about anything being directed immediately to my voicemail? Problematic, especially if they don't leave a message and instead just keep trying me, as I receive no notification from my operator about missed calls and there is no way other than to try and make an outgoing call as to determine whether the service is still functioning.
It isn't shown as a regular application whilst not in a call and I don't believe I should even have to check if it's still running as this function is the main function implied in the device category 'smartphone'.
Rant over, so if there's anyone out there who could shed some light onto this situation, please do.
Also, kind of off topic- but in the case that this is a universal problem (which I'm assuming it is, having had two completely different handsets with the same symptoms), do I go after Nokia to provide me with a different model of handset, or the supplier (The Carphone Warehouse) since my handset isn't properly providing a function that is advertised?
Somehow I presume I'm rightfully entitled to a reimbursement or different model. Hopefully.
Thanks in advance people

You're so right.... I managed to get over the problems, never upgraded the firmware... Once I got all the apps I use and needed, never touched it.... Still the phone is a mess, worst ever... I came from an Iphone, fleeing from lock OS and stuff, and found myself in a Symbian hell..... Definitely Windows Mobile... I'm so down on this phone, I spent 650 dollars, one year ago.... The worst investment ever... Never again a Nokia or a Symbian smartphone, for cheap ones apparently are the best. I'll wait another year, to feel less pain when buying a new one for 600-1000 dollars.
Solution: Buy another phone... Better if it is a Windows Mobile.... As HTC for example.
Regards,

Elements 12 Organizer not functioning correctly uploading files and viewing.

Elements 12 Organizer does not function correctly. It will upload new files but will not allow me to view correctly or edit. I attempts to reconnect files. When I attempt to do this manually it states that the files are already there. Very frustrating and Adobe representatives will not assist me.

Windows Media Player 12 is installed.
Windows Media Player
Version 12.0.9600.16384
Operating System
Version:
6.3.9600
System Locale:
en-GB
Service Pack:
0.0
User Locale:
en-GB
Build Lab:
9600.winblue_gdr.131030-1505
Geo ID:
United Kingdom
Type:
Workstation
DRM Version:
11.0.9600.16384
Architecture:
x86
Indiv Version:
2.9.0.1
Processors:
8
Video codecs are:
Type
Name
Format
Binary
Version
ICM
Microsoft YUV
UYVY
msyuv.dll
6.3.9600.16384
ICM
Intel IYUV codec
IYUV
iyuv_32.dll
6.3.9600.16384
ICM
Cinepak Codec by Radius
cvid
iccvid.dll
1.10.0.12
ICM
Microsoft YUV
UYVY
msyuv.dll
6.3.9600.16384
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.3.9600.16384
ICM
Microsoft YUV
UYVY
msyuv.dll
6.3.9600.16384
ICM
Intel IYUV codec
IYUV
iyuv_32.dll
6.3.9600.16384
ICM
Microsoft RLE
MRLE
msrle32.dll
6.3.9600.16384
ICM
Microsoft Video 1
MSVC
msvidc32.dll
6.3.9600.16384
ICM
proDAD Codec
pDAD
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.3.9600.16384
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.3.9600.16384
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2, VC1S
wmvdecod.dll
6.3.9600.16384
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.3.9600.16384
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.3.9600.16384
Windows Media Player plays .mps files without problems
Quick Time Player v7.7.4 installed (at suggestion from adobe premiere organiser). Will not play .mps files
Adobe Premiere 12 organiser will not play .mps files, editor will play and edit them.
Media Player Classic not installed

I have a folder with 10 folders inside it, 8 of the folders will not function when I use "show view options".

I have a Folder with 10 Folders inside it, 8 of the Folders will not function when I use "show view options", they always default back the default. The "show view options" works on all my other Folders in my system, even on the first two of the Folder in question. How can I correct it? I have tried every thing I can think of, even deleting the Folders & reintalling them. For some strange reason the "show view options" only does not work on the last 8 Folders in the Folder in question.

Instead GarageBand recognize my keyboard and i can play normally, also, if it can help, those are the Audio and Midi Logic Preferences and the Controller Surfaces Setup with the keyboard connected :

How do i split events when Split Events Before Selected Clips is not even highlighted

iMovie question - how do i split events when Split Events Before Selected Clips is not even highlighted? I just puchased this new iMac yesterday and i am still trying to figure things out!

You should start by having a read of the online manuals and correct forums.
This forum is for iOS (iPads and iPhones).
There are plenty of great resources on the Apple website,
but try to search for iMovie Mac.

Share selected clips will not function correctly

Similar Messages

Maybe you are looking for