Share to mobileme / username and password will not accepted

Hello,
I'm using the localiced german version of FCP, so I'm not sure which are the correct words in the dialog boxes.
When I try to share to mobileme with the option "visible for everyone or only for me" everything is okay, but when I wont to share to a specific person using the last option in the dropdown-menu "Names and Passwords"? (in german "Namen und Kennwörter bearbeiten..." and entering a username and a password for this specific person FCP hangs for a few seconds and then just show me the option "visible for everyone".
FCP did not accepting my input. Trashing the preferences did not resolve the problem. iPhoto is able to connect to mobileme also with sharing to a specific person.

I've tested it now with iMovie with success. In the sharing options all my previously entered users with there password are shown. But in FCP all are gone. What can i do?
Anyone?

Similar Messages

Firefox's option bar for saving username and passwords will not show, I have it set to remember passwords for sites. Can sites be added manually?

I was using Norton to remember my user names and passwords, however I do not use Norton any longer. Firefox does not give me the option of saving passwords even though I have it set to remember them.
There are no sites in the exceptions list. How can I reset Firefox so the option bar shows?

* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"
See also http://kb.mozillazine.org/Password_Manager

In attempting to install Adobe Flash Player, my username and password are not accepted. Cannot proc

Need help

To let you know, my computer was hacked last night. My password has changed. You should be alerted.
Marilyn McNeil

Username and password do not get applied to WS Invocations in PS3 project

I am running into a situation where username and password do not get applied to WS Invocations in PS3 project I am deploying using config plan, this is used to work correctly in PS2. Did the syntax for the deployment configuration plans for PS3 BPM have changed?
This is the error that I am getting from the BPM soa_server.log file:
<Feb 9, 2011 1:04:16 PM PST> <Error> <oracle.wsm.resources.enforcement> <WSM-07501> <Failure in Oracle WSM Agent processRequest, category=security, function=agent.function.client, application=default, composite=SpringWorkflow, modelObj=ActivityService, policy=oracle/wss_username_token_client_policy, policyVersion=null, assertionName={http://schemas.oracle.com/ws/2006/01/securitypolicy}wss-username-token.
oracle.wsm.common.sdk.WSMException: WSM-00015 : The user name is missing.
Caused by: oracle.fabric.common.PolicyEnforcementException: WSM-00015 : The user name is missing.
at oracle.fabric.common.AbstractSecurityInterceptor.processResult(AbstractSecurityInterceptor.java:239)
at oracle.fabric.common.BindingSecurityInterceptor.processRequest(BindingSecurityInterceptor.java:95)
I enabled ws logging for incoming and outgoing P6 web service requests, I see that the BPM server is not making an outgoing webservice call, looking more into the log file from soa_server.log I see that the exception is a PolicyEnforcementException confirming my suspicion that the username and password from the deployment config plan are not getting applied at runtime. This is used to work correctly in PS2. Any suggestions?
Config-plan:
<reference name="ActivityService">

<binding type="ws">
<attribute name="port">
<replace>http://xmlns.oracle.com/Primavera/P6/WS/Activity/V1#wsdl.endpoint(ActivityService/ActivityPort)</replace>
</attribute>
<attribute name="location">
<replace>http://x.x.x.x:7001/p6ws/services/ActivityService?wsdl</replace>
</attribute>
<property name="weblogic.wsee.wsat.transaction.flowOption">
<replace>WSDLDriven</replace>
</property>
<property name="oracle.webservices.auth.username">
<replace>admin</replace>
</property>
<property name="oracle.webservices.auth.password">
<replace>admin</replace>
</property>
</binding>
</reference>
Deployment Log from Jdev:
[04:05:01 PM] ---- Deployment started. ----
[04:05:01 PM] Target platform is (Weblogic 10.3).
[04:05:01 PM] Running dependency analysis...
[04:05:01 PM] Building...
[04:05:11 PM] Deploying profile...
[04:05:11 PM] Updating revision id for the SOA Project 'SpringWorkflow.jpr' to '1.0'..
*[04:05:11 PM] Copying file:/E:/dev/bpm11g/springdemo/SpringWorkflow/SpringWorkflow_cfgplan.xml to soaconfigplan.xml*
[04:05:11 PM] Adding soaconfigplan.xml to archive.
[04:05:11 PM] Wrote Archive Module to E:\dev\bpm11g\springdemo\SpringWorkflow\deploy\sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Deploying sca_SpringWorkflow_rev1.0.jar to partition "default" on server soa_server1 [x.x.x.x:8001]
[04:05:11 PM] Processing sar=/E:/dev/bpm11g/springdemo/SpringWorkflow/deploy/sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Adding sar file - E:\dev\bpm11g\springdemo\SpringWorkflow\deploy\sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Preparing to send HTTP request for deployment
[04:05:11 PM] Creating HTTP connection to hostx.x.x.x port:8001
[04:05:13 PM] Sending internal deployment descriptor
[04:05:13 PM] Sending archive - sca_SpringWorkflow_rev1.0.jar
[04:05:15 PM] Received HTTP response from the server, response code=200
[04:05:15 PM] Successfully deployed archive sca_SpringWorkflow_rev1.0.jar to partition "default" on server soa_server1 [x.x.x.x:8001]
[04:05:15 PM] Elapsed time for deployment: 14 seconds
[04:05:15 PM] ---- Deployment finished. ----

We should take a look at the log files to see what's really going on but if you haven't done anything with the installation yet then "reinstalling" is very easy.
In the directory where you launched the jar file, you should find a directory named "crx-quickstart". Simply rename this directory to "crx-quickstart.old" and restart the jar file. Your new environment will be ready in a couple of minutes. Keep the old directory and look into the [your directory]\crx-quickstart\logs directory for details on your original problem.

Username and password do not match

I can no longer authenticate. I get "Username and password do not match".
Is there a file I can edit to reset the username and password?
Thanks in advance,
Mike Britton

We should take a look at the log files to see what's really going on but if you haven't done anything with the installation yet then "reinstalling" is very easy.
In the directory where you launched the jar file, you should find a directory named "crx-quickstart". Simply rename this directory to "crx-quickstart.old" and restart the jar file. Your new environment will be ready in a couple of minutes. Keep the old directory and look into the [your directory]\crx-quickstart\logs directory for details on your original problem.

Claims Based Authentication SPSecurityTokenService.Issue() failed: The security token username and password could not be validated.

Please excuse the lousy table...Its late :-)
I have a multi-server SP2010 farm. Patched up to
Configuration database version: 14.0.6106.5002
My goal is to have a claims based web application that authenticated to ADAM for Extranet. I have configured the servers exactly to MSDN and technet specs (following this spec to the
letter (
http://technet.microsoft.com/en-us/library/ee806882.aspx) to allow the forms side of the web app to authenticate to ADAM.
IT WORKS IN DEV!!! , which is a single server farm. However, it does not work in production. I get the following:
Claims Auth log entries:
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
f2ut
Verbose
Authenticated with login provider. Validating request security token.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Using membership provider 'ADAMProvider'.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Doing password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Failed password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Unexpected
Password check on '[email protected]' generated exception: 'System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security
token username and password could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
fo1t
Monitorable
SPSecurityTokenService.Issue() failed: System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password
could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
fsq7
High
Request for security token failed with exception: System.ServiceModel.FaultException: The security token username and password could not be validated.
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
  at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo)
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
8306
Critical
An exception occurred when trying to issue security token: The security token username and password could not be validated..
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
f2un
Verbose
Form authentication failed.
I have tried EVERYTHING (well, nt everything, I don’t have the fix I suppose).
I found plenty out there and nothing directly correlates with this issue.
I searched on all parts of the errors I got.
This contains an interesting blurb about setting up access for the apppool id correctly.
That’s not the case for me. It works in dev and the same id are used there.
http://sharepoint-2010-world.blogspot.com/2011/03/adam-forms-based-authentication-in.html
This was good but it doesn’t give specs on what the environment looks like:
http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/557143a6-4b36-4939-bb7f-d62a9335fd18
The was interesting…but I am patched up beyond the June 2011 CU so it’s a moot point:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/9b8368ef-c5e5-4ead-b348-7b2b5587cfc8
Any and all help would be greatly appreciated!

Hi.
You say its a multiserver farm, do you have more than one web server then?
If thats the case, have you tried accessing the site on each server directly?
Found this for you, maybe that can help?
Troubleshooting Exceptions: System.ServiceModel.FaultException`1
http://msdn.microsoft.com/en-us/library/bb907220.aspx
and this:
SharePoint 2010 Claims Authentication - The security token username and password could not be validated reoccurring every morning
http://social.technet.microsoft.com/Forums/pl-PL/sharepoint2010setup/thread/383f1f9b-5c4a-4e19-b770-2a54b7ab1ca1
and
This seems to be a good guide:
http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/
Good luck
Thomas Balkeståhl - Technical Specialist - SharePoint - http://blksthl.wordpress.com

My wife has bought an iPad from a friend. My wife has an iphone with an iCloud account. When trying to connect to iCloud from the new iPad it says her username and password are not authorised. Any help

MMy wife had bought an iPad from a friend. My wife already has an iPhone, which is registered to iCloud. She cannot acces iCloud from the new iPad. It says her username and password is not authorised. What do we need to do.

This could be a couple different things.
     The device is not authorized to the Apple ID.
         Continue setup for the ID on the device.
There is an account issue
        Is she able to get signed in at
               Appleid.apple.com
                   and manage the account
Can she get signed in at
Supportprofile.apple.com ?
         How many devices are registered to that Apple ID?

My apple id and password will not verify

I am trying to turn on the iCloud service. The ID and password will not verify. The correct information is entered. Ultimately I am trying to back up my phone to the cloud (I was unable to back it up to my PC) Thanks

Try:
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems

HT1695 I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???

I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???

You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.

Im trying to install new drivers for my printer and it will not accept my password

Im trying to install new drivers for my printer and it will not accept my password

Hey fyermanbob,
Thanks for using Apple Support Communities.
OS X Mavericks: If your administrator password was not accepted
http://support.apple.com/kb/PH14014
Have a nice day,
Mario

HT4759 When I sign into my mobile me account the username and password is not recognised what do I do?

When I sign into my mobile me account the username and password is not recognised what do I do?

- Go to settings>iTunes and App Store and sign out and sign into your account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

My password keeps coming back incorrect, I have reset it 3 times now and it will not accept it on my iTunes to update on my phone or pad

my password keeps coming back incorrect, I have reset it 3 times now and it will not accept it on my iTunes to update on my phone or pad. It obviously is the right password since I was able to log in here...

Firstly like King Penguin says log out ,i would clear cookies and history in the safari settings, then I would restart the unit and then open up ITunes and try using the last PW you entered when you changed it.Cookies can be a bugger.

I have moved from the UK to New Zealand and Itunes will not accept my new Zealand bank details, as a result nothing will work on my phone and I cant access emails!

I have moved from the UK to New Zealand and Itunes will not accept my new Zealand bank details, I am trying to change my details on the Iphone 4s

Do you have a new Apple ID to use in NZ? If not open iTunes Store. Log out of your old Apple ID, then try to login. Select Create Apple ID from the dialog that appears. Make a new Apple ID for NZ with a NZ email address. Once that is approved and verified, log into the iTunes Store with the new Apple ID. This should fix all other issues.
Change iTunes Store Country on an iDevice
1. Tap Settings;
2. Tap iTunes & App Stores;
3. Tap View Apple ID;
4. Enter your user name and password;
5. Tap Country/Region;
6. Tap Change Country/Region;
7. Select the region where you will be located;
8. Tap Done.
Also, see How to Change Your iTunes Store Account Location | eHow.com.

In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

I am trying to change the color of a background layer and it will not accept the color I want

I am trying to change the color of a background layer and it will not accept the color I want

If you want to get help you may have to provide a lot more details about what you are doing (which tools or commands do you use, what exactly happens when it fails, …)?

Share to mobileme / username and password will not accepted

Similar Messages

Maybe you are looking for