Share your monsterwm desktop!

The same rules aplly as for other screenshots topics. Share some info about bars/panels, terminals, color schemes and other things that you find interesting and relevant.
This was my wallpaper before (in the spirit of monsterwm):
* wallpaper is available here
Now i'm back to my default one but that is not important since i use terminals for most of my work and leisure:
At the moment, i use no bar (i plan on using dzen/somesortabar in future), my config.h and .Xresources are available on internet.

kuraku wrote:
The same rules aplly as for other screenshots topics. Share some info about bars/panels, terminals, color schemes and other things that you find interesting and relevant.
This was my wallpaper before (in the spirit of monsterwm):
http://i.imgur.com/6uAk6s.png
* wallpaper is available here
Now i'm back to my default one but that is not important since i use terminals for most of my work and leisure:
http://i.imgur.com/wqOVHs.png
At the moment, i use no bar (i plan on using dzen/somesortabar in future), my config.h and .Xresources are available on internet.
Can you share your blue monster wallpaper, please?

Similar Messages

Can I direct all users in one OU to share a common desktop/my document? (Folder Redirection)

Say we have a few OU's, each OU will only have 1 active user at any given time. Lets call it OU: A,B,C,D. When a person leaves, I want the new user to be able to access all of the same desktop/documents of the previous user. I don't want to have to come
in and copy the desktop/my documents folder each time for this.
Say if User in OU "A" leaves and there's a temp/replacement, can I just copy the existing user's profile and create a new one in OU A and have the new user be able to log in with their new account but have all the desktops and my documents
of the previous user. Of course if this can be achieved, even when the machine gets replaced, the desktops/my documents are there.
At the moment, we have shared folder for those groups of people but we're not enforcing them to save to the mapped drive. Lots of them have no idea what a mapped drive is. :( I want to simplify this process and get away with spending hours of backing up/restoring
people's my documents and desktops when they come and go.
Danny

Hi,
I don't think we can set multiple users to a same redirected folder.
Under Basic - Redirect everyone's folder to the same location, there is only one option seems close to your purpose which is "Redirect to the following location". However to get it work, the user need to be the owner of the target folder, and it will not
work even we set Everyone as the Owner.
Meanwhile I do not understand why you would like to share a redirected Desktop with all users. If you would like to share files or folders, you can map a folder for all users. If you would like to publish applications to all users, you can deploy application
through Group Policy.
If you have any feedback on our support, please send to [email protected]
Yes you can and I confirm this works. The key is to uncheck
"grant user exclusive rights"
here's an example of what I did.
Created OU A and B
OU A - Added user A1 and A2
OU B - Added user B1 and B2
Created Security Groups A and B
Share folders \\PDC1\A\Desktop and \\PDC1\A\Documents grant permission to security group A (repeat for group B)
Use basic folder redirect and the option to redirect everyone to the same shared drives as above. In the setting tab, uncheck "Grant user exclusive rights"
And to answer your question, we do you mapped folders. Each user have their own mapped drives but no one is using it. They don't even know what mapped drives are in most
cases. They tend to like to save everything to their desktops or their whatever the default saved location is, in this case it's "Documents". There are plenty other reasons why I want this.
Danny

Want to Share Just my Desktop!!!

Hello everyone...
I am on a wired network... and i just want to share my desktop folder only not all the drives... and if its possible, the people who are tryin to connect the Desktop don't have to enter any password or something...
Regards
Tanz

The Shared Folder in the Users Folder, in the hard disk drive,
may be a better and more secure place to put items others
could have access to; since your actual desktop folder usually
is safeguarded by your account user password to limit access.
There are several ways to share access and files between Macs
and also between Mac & PC users. Some of them do require a
level of access set up in advance between specific computers
since to do otherwise may leave a computer too vulnerable.
While results from a search from where I am may vary from a
search performed elsewhere (some countries have internet
rules different than others) a general search via Google that I
just did using the following words in the order shown says a lot:
' Mac OS X 10.5 Help: shared file access ' (google search - results link)
http://www.google.com/#hl=en&source=hp&q=MacOS+X+10.5+Help%3A+shared+file+access&btnG=Google+Search&aq=f&aqi=&aql=&oq=Mac+OS +X+10.5+Help%3A+shared+fileaccess&gs_rfai=&fp=3f73b7d243bf661
Also: Learn about File Sharing in the following specific article(s)
• Mac 101: File Sharing
http://support.apple.com/kb/ht1549
• Mac OS X 10.5 Help: Sharing Files on your Network
http://docs.info.apple.com/article.html?path=Mac/10.5/en/17131.html
Actual 'Screen Sharing' is another matter, such as Apple Remote Desktop.
• Add more power to 10.5's Screen Sharing - utilities - Mac OS X Hints:
http://www.macworld.com/article/131094/2007/12/screensharepower.html
• Tutorial: Screen Sharing in Leopard (10.5) How it works/how it doesn't:
http://reviews.cnet.com/8301-13727_7-10329122-263.html
{Since this probably is not needed, I included those two links above to show
them in contrast to setting up file sharing access through the Shared folder.}
The basic Shared folder can be set for other user's access without having
to compromise the security of your user account or the main Admin account.
As an Admin or owner, you have the permission or privilege level to set other
user access limitations in the computer; so it is not open to anyone out there.
So, it won't be super simple to accomplish since it retains security & integrity
if done correctly, of the computer, its system, and the user account data.
Another general Google search of certain words (noting regional access,
language, and country filters on the internet may change between what
I see in results, and what you may get by performing a search, there) on
these words, may yield a few different leads to instructional pages:
' Mac OS X 10.5 shared user folder ' (google search results - link)
http://www.google.com/#hl=en&source=hp&q=MacOS+X+10.5+shared+user+folder&btnG=Google+Search&aq=f&aqi=&aql=&oq=Mac+OS+X+10.5+ shared+userfolder&gs_rfai=&fp=3f73b7d243bf661
Some results in both Google search links are similar; the two direct to web
pages above may be more than adequate to set up sharing a folder/file.
However, sharing the Desktop folder, (by itself, is in your User folder, in the
Users folder in the hard drive) may not allow anyone the kind of access
most persons would want open to a network or to other users.
For matters about Securing your Mac, there are Apple Support documents
in PDF you can download for offline use, these are about 3MB in size. If
you need to know Admin and server level security settings, that's in depth.
Hopefully this is not too much info; though there are several options, the
basic setup will involve controlling access so it is not open to everyone.
And that is, if it's set up correctly.
{If you keep many items on the Desktop of your computer, that is not
recommended; there are a few reasons why, on that score alone.}
Good luck & happy computing!

Can you share your iTunes purchases with family members

Can you share your iTunes purchases with other family members.

In your household, yes.
BTW, your question has nothing to do with itunes U.

Please share your PDF/UA-compliance experiences

I encourage others to share your experiences in remediating PDFs for ISO 14289 (PDF/UA) compliance. Let’s learn from each other’s experiences.
I am working with documents that previously passed the Acrobat checker and PAC 1.3 along with manual checks for WCAG 2.0 compliance – so, the documents were as accessible as I knew how to make them. Below are the errors that I am seeing quite a bit from the new PAC2 PDF/UA-compliance checker. The “fix” is not necessarily the best, just what I have found that seems to work. I am using Acrobat Pro XI.
error: Font not embedded
fix: Tools > Print Production > Preflight > PDF fixups > Embed fonts
comment: This does not always work as some font licenses do not allow embedding. If you encounter non-embeddable fonts hopefully you have the source document and can use a different font.
error: Tagged content present inside an Artifact
fix: Open the Content pane. Open Artifact containers to find any content containers hiding inside. Drag the content containers to their proper place outside the Artifact container.
error: Alternative description missing for an annotation
fix: Add alt text to link tags.
comment: This seems an odd error. Some links benefit from alt text but others are perfectly clear without it. Seems like this should be a judgment call, but the Matterhorn Protocol insists on links having alt text.
error: Figure element on a single page with no bounding box.
fix: This error goes away if I tag the figure as an artifact, which makes sense. But if I then retag it as a figure and add back in the alt text, the error stays away.
comment: Seems odd. Even the Matterhorn Protocol PDF (http://www.pdfa.org/wp-content/uploads/2013/08/MatterhornProtocol_1-0.pdf) fails PAC2 on this point! This could be a rough spot in the PAC2 beta, not a real error, but is easy enough to “fix”.
error: DisplayDocTitle key is not set to true
fix: File > Properties > Initial View tab > In the Show drop down box, select “Document Title”
error: PDF/UA identifier missing
fix: Create an xmp file that includes the required snippet of metadata (example: http://bygosh.com/files/pdfuaid.xmp). Then: File > Properties > Description tab > Additional Metadata... > Advanced > Append
comment: This should be the final remediation step, after the document is otherwise PDF/UA-compliant. To apply the PDF/UA ID to a document that is not compliant would be fibbing.

Hi Wendy,
The requirement that all links include alternate text in the Contents key is frustrating ...
To the best of my knowledge, no current AT makes use of the Contents key alt text
No current tool makes it easy to create and configure the Contents key. To do so manually with a long set of links such as a table of contents is time consuming.
In a well-written document, link text is often quite clear in context, and alt text provides no benefit in terms of accessibility. This is almost certainly the case with a table of contents.
So, you have to make a choice. You can ...
Ignore this particular PDF/UA criterion and somehow live with the resulting scolding from PAC2.
Apply regular alt text to the links. This makes PAC2 happy but PAC 1.3 unhappy.
Patiently wait for the opportunity to shell out big bucks for a new tool that automates setting the link Contents key, like the "coming soon" PDF Global Access (new version of CommonLook with a new name) from NetCentric.
Bite the bullet and set the Contents key for each link tag manually. It is a bit intimidating at first to delve into the innards of the tag structure and make changes, but you will quickly gain experience and comfort level. This is the best solution if you, like me, obsess with making both PAC2 and PAC 1.3 say "Pass". Just be sure, as always when working with Acrobat, to save early and often to a new file name, in case something goes horribly wrong.
If you choose the last bullet, the PDF/UA Reference Suite includes example TOCs. As to what should be entered for "Value", for external links I typically use the title of the target page. For TOC entries, following the examples in the PDF Reference Suite, the Contents key value mirrors the text of the link, for example "Chapter 1: Introduction".
Hope this helps.
a 'C' student

Pls. share your exp. using Cool&Quite

Please share your experiences using Cool & Quite.
Reason: i'm looking for something that will underclock and seriously cut down power consumption when my pc is idle or barely used (surfin, writing, watching a movie, or playing solitair ). Often after some intense gaming i like to relax watching a good movie (PC->Xbox->TV) and there's no need to keep it running @2500MHz for that
Is the C&Q function adequate for this and is it stable when pc is OC-ed (c specs)?
Are there any "conlicts" with other programs/games i should be aware of?
In case C&Q is not the way to go, what would u suggest to be good software alternatives (like Corecell, Clockgen and the likes, but they should preferably not load on start-up but only when i want them to... i prefer doing my OC-ing straight thru' Bios)
Thx,
-Alfa-

I don't see how PSU would be the reason for your crashes when using C&Q.
On the contrary, when C&Q kicks in it should reduce your power consumption, not up it.
I did notice however that using certain lower multipliers and/or lower FSB's cause my system to crash, and i'm still waiting for a bios fix on that (if there ever wil...).
Edit: actualy, i'm gonna give bios 1.3 a try again tonight, see if that helps. System has been stable for +/-2weeks now with bios 1.47b (on 11x230fsb1:1x1t or 9,5x260fsb1:1x2t, most other settings are unstable), so i'm sure CPU&ram OC ok at those speeds.

Upgrade R11.5.10 to R12.1.3-- please share your experience

Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advance

user13648035 wrote:
Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advancePlease see old threads for similar discussion -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+11+to+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Can you please share your experience in implementing / upgrading the Primavera EPPM R8.3?

Hi,
In our company various versions (V7, R8.1 and R8.3) of Primavera being used in various locations. To bring all the location to a common platform, management has decided to implement / upgrade Primavera EPPM P6 R8.3 and also planned to integrate Primavera P6 R8.3 EPPM with Oracle (EBS) Projects application . Hence, If any of you implemented Primavera P6 EPPM R8.3 or upgraded the earlier versions to Primavera P6 R8.3. Please share your ideas and also the pros and cons of implementing R 8.3 EPPM. For your information we are going to have SQL database since all the existing databases are in SQL.
Please share your ideas and experiences.

Hi,
we have done a lot of implementations and migrations to the P6 EPPM R8.3 from different former versions and this is working fine. the dbsetup does a good job.
A good way in my point of view is to set up a new P6 EPPM R8.3 system with a new PMDB Instance which will keep the configurations so that you easily can migrate or exchange the instances. Always remind to have a validated backup of any instance before migrating.
Before migration you should mind the following points:
The source version of the old P6 PMDB instance is:
P6.2.1 or before => first you need to migrate it to P6 V7.0 before you can migrate it to P6 R8.3
P6 V7.0 => check if you have used P6 WebAccess: if not okay, else check if you used jackrabbit (look for migration tool), Workflows (close all before migrating); Check if using Jobservice XER-Export (no longer available); Jobservice Batchreport (only Workaround available see Knowledgebase); Risks in the P6 Client (need to be manually migrated)
P6 R8.0 to R8.2 => Using Extended Schema, Enterprise Reporting Database, own BI Publisher Reports => Check stept to be taken for migration
Other questions are:
Which authentication method will you use (native, LDAP, SSO)? If not using native and you want to connect the BI Publisher then you need also to use that authentication there.
The migration itself is pretty easy if you take care that all sessions are closed (no users or unclosed primavera sessions settings on that instance, stop all Applications, interfaces or Services connected to the instance. Cleanup your refrdel_deletes, logical_deletes and (if used before), extended Schema tables.
Then you can migrate with dbsetup, use additional Service Packs and Fixpacks (actually Service Pack 1) on the instances and then you can connect them into the environment by adding it to the P6 Configuration.
I mentioned you don't want to put all data into one final PMDB-Instance.
Regards,
Daniel

Table controlled partitioning - please share your experiences.

hello ,
is anyone using table controlled partitioning in the sap on db2 for z/os enviroment?
can you please share your [good/bad]experiences on the subject ?
is there anything we should all watchout for ?
thanks
omer brandis
visit the sap on db2 for z/os blog
http://blogs.ittoolbox.com/sap/db2/

hello ,
is anyone using table controlled partitioning in the sap on db2 for z/os enviroment?
can you please share your [good/bad]experiences on the subject ?
is there anything we should all watchout for ?
thanks
omer brandis
visit the sap on db2 for z/os blog
http://blogs.ittoolbox.com/sap/db2/

Please share your experiance on Oracle Developer

Hi,
I need to decide a suitable architecture for my new product for
3-tier implementation.
I would like to know anyone adopted developer 6.0 and having any
project/product on 3-tier application, what are all the problems
faced or likely to face in this approach?. Will be there any
performance problems?. Is there any reference site in India?
Please share your experiences.
Thanks
-Sri
null

When I started reading your list, my gut feeling was, why Chieftec? But probably budgetary considerations were the main reason. For the PSU I would prefer a Corsair AX series or Seasonic gold label one.
I would have a look at the GTX 660 Ti with 4 GB VRAM. The extra memory would help with AE and 4D and in PR can prevent the rather ungraceful reverting to software mode if VRAM is depleted. Of course this depends on image size, but if the extra cost fits in your budget, it may be worth it.
If it fits in the chassis, I would look at a CPU cooler like the Noctua NH-D14 because of the bigger diameter fans. So, better cooling and less noise.

Please share your understanding and experiences on Picking Request Output.

Hi,
Have you ever involved in any project which related to the 'Picking Request' Output IDOC.
Normally it is triggered from Delivery output and corresponding picking data will be sent...
Please share your understanding on how to trigger this kind of Picking request ouput from delivery processing.
For example, you are the person is assigned to explore an existing SAP-system. Your task is to simulate an order cycle and most important points is to trigger the 'Picking request' Output IDOC in delivery order. But you dont know what Sales order type,Dlv type is used. The only thing you knew is the picking request output type is ZXXX from delivery header output.
How do you find out corresponding sales order type/Dlv order type/Billing order type according to an output type name ZXXX.
First, i will share my ideas:
Through ZXXX we could get corresponding condition records, as there contain some info like dlv type/sales order type..kinds of combinations..Follow that, i will find already proceessed sales documents. Then refer those document to do the re-creation.
Please kindly let me know your ideas.
Thanks!

Hi there,
Define a new O/p type. Select EDI in Transmission in Default values of O/p type for external system. Select ALE for internal system.
Assign an access sequence to that.
Maintain the determiantion procedure. In the requirement routine, put a condition that it should trigger only after picking / packing is done.
Assign the O/p to the delivery type.
In WE20, define a new partner to whom you want to send the IDOC. Give the required details.
Define a new IDOC processing prog & assign that to the process code of the IDOC in the partner profiles.
So whenever you do picking, the Op type will be trigered which will be processed by the IDOC prog & send it to the external system.
Regards,
Sivanand

Can you share your keyboard and mouse when using S...

can you share your keyboard and mouse when using Skype Screen share?
I want to give a remote user access to a application on my computer. Is this posisable with Skype?
Can you share just one application on yourscreen and not the complete screen?

you can share both your entire screen, or just a specific window of program in your computer. it is not possible to give someone a remote access to your computer through skype, and it is also not possible to share your mouse and keyboard.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Can you share your itunes with someone over long distance

can you share your library with someone that isn't on the same wifi network as you?

No. Same wifi and same Apple ID is needed.

Share your opinion on Adobe Contribute for a chance to win $500USD!

Share your opinion on Adobe Contribute for a chance to win
one of five $100USD gift checks or one $500USD gift check!
Take the survey now:
http://direct.adobe.com/r?xJvPqWTEJcqTHEcHqTJlH
In exchange for taking a short survey about your opinions of
Adobe Contribute, you will have the option of participating in a
drawing for a chance to win one of five $100USD gift checks or one
$500USD gift check.
Your responses will remain confidential. No information about
you will be sold or furnished to any other company whatsoever, nor
will you receive unsolicited emails because of your participation
in this survey.
Full list of rules:
http://direct.adobe.com/r?xJvPqWTEJcqTcEcHqTJlc
To take the survey, please visit:
http://direct.adobe.com/r?xJvPqWTEJcqTHEcHqTJlH
Ramesh Gopalakrishna
Product Manager
Adobe Contribute Team

Hey SpiceHeads! We know you’re often running around saving the day for your company, and your valiant efforts are sometimes overlooked. At Brother we’d love to reward your hard work and innovative thinking! Share one of your heroic IT acts in the comment section below for a chance to win one of two gaming prizes!First prize will get aMicrosoft Xbox One with Kinect.Runner up will get aSony PlayStation 4 Console.The prizes don’t stop there! We’re also giving anEVGAGeForce GTX TITAN X Suplerclocked graphics card!For a chance to win the grand prize,simply fill out the form located here.Also, the first 10 SpiceHeads to post their story and complete the form will be given a special mystery swag bag from Brother.May the odds be in your favor!End date: 8/14 US only.Terms & Conditions
This topic first appeared in the Spiceworks Community

Zen micro freezes: share your experie

Please share your experience with Zen Micro's hard disk problems with me.
Unfortunately the beatiful zen micro i bought almost two years ago, is in a state of coma. It froze up and no option on the recovery mode could change that state.
I know that a lot of you guys had/have the same problem, given the amount of help-threads.
I sent the player to the shop since we have a two-years-warranty in Germany. The shop kept the player and refuses to exchange/repair my player.
So I am about to contact a lawyer to sue the shop.
Any evidence to support my case ? your experience with the freezing micro ? will back up my case.
Thanks in advance!

Issue appears to be resolved. The following is the instruction set sent by Creative Labs that I followed:
. Ensure that the player is turned off.
2. Remove the battery.
3. Move and hold the Power button to the Power On position and re-insert
the battery to the Zen Micro. Hold the Power button until the rescue
mode appears.
4. After 2-3 seconds the rescue menu will be displayed.
At this point the battery can safely be replaced and maintenance options
performed.
5. Four options will be displayed on the LCD screen:
? Clean Up - (To rearrange your stored data)
? Format All - (To format and remove all data)
? Reload Firmware - (Reloads your player's operating system - Do not
choose this option unless you have downloaded a firmware update from the
Creative website)
? Reboot - (Restarts your Player)
6. Select the Clean Up and then the Reboot option.
Now, please try turning off the player.

Share your monsterwm desktop!

Similar Messages

Maybe you are looking for