Shared calendar does not send notification of changes/updates

I just recently updated to iOS6 and began sharing my calendar with my girlfriend, who is iOS5.  She is able to add and make changes to the calendar and I receive updates in the Invitations tray of the Calendar app.  But when I make changes she is not notified of the change.  If the option on iCloud.com is changed to received email notifications she received it just fine...but not so with in app notifications. 
Any suggestions on what could be the problem?  I am using an @me.com email address and she has a yahoo email also used or her Apple ID.  I even went so far as to register her for iCloud and set up a new email address but she still did not receive notifications of changes.  Could this be related to using different version of iOS or is this expected behavior?

Hi prashanth,
Appreciate your response, I referred the whitepaper also. White paper also says if there is any change in the sales order, automatically a note is sent to the buyer regarding the changes.
It doesn't mention any setups as such.
Normal back-to-back order is working fine.
Regards,
Prasad

Similar Messages

  • Create Upgrade Evaluation Site Collections Timer Job does not send notification Email when the Site is created

    Hello Everyone,
    My problem is:
    The Create Upgrade Evaluation Site Collections job does not send a Notification Email when the Eval Site is created. I only get a notification E-Mail that mention that a Upgrade Evaluation Site Colletion is requested and then after 27 Days that the Evla
    Site will be deleted in three Days.
    My Enviroment:
    SharePoint Foundation 2013 Sp1 on Windows Server 2012
    Exchange 2010 SP3
    I hope someone can help.
    best regards
    domschi

    Hi domschi,
    As I understand, you didn’t receive email generated from Create Upgrade Evaluation Site Collections timer job. While you might receive email generated from Delete Upgrade Evaluation Site Collections.
    When you request an evaluation site collection, the request is added to a Timer job
     which runs once a day. You will receive an e-mail message when the upgrade evaluation site is available. This might take up to 24 hours. The message includes a link to the evaluation site. Upgrade evaluation site collections are set to automatically
    expire (after 30 days by default).
    Please go to CA > Monitoring > Review Job Definitions, locate issue timer job and click Run Now. Then go to Job History and check if the issue job failed to run.
    Also, please check if the email are received by Exchange Hub server.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Find My Friends does not send notifications - iOS8

    The Find My Friends iOS8 app is not sending the requested notifications when "Notify Me" is being used to alert arrival at/departure from a location.  All following/sharing location settings are confirmed amongst users (Find My Phone works, as does location in Find My Friends).
    "Notify Me" will save the request, and appear highlighted in the main screen, and will stay that way as long as the alert conditions have not been met.  However "Notify Me" will clear to default, inactive state after the requested arrival/departure has happened, without having sent the nofitication.
    Any ideas?
    Thanks

    Hello weeno,
    Thank you for using Apple Support Communities. 
    You can use the following article:
    iCloud:Troubleshooting Find My Friends
    Take a look at "Issues with locations requests".
    Regards,
    Jeff D. 

  • Calendar does not send email remainders

    Hi People,
    I have OCS 9.0.4 running on linux ES 2.1. When a meeting is created, email remainders are not sent to attendees. I tried configuring sendmail using the Note:304804.1 from metalink but the problem still persists. I think the cause is that oracle calendar uses sendmail to send email to OCS users. Now sendmail runs on port 25 which already in use by the midtier listener and so gives the message "MTA: problem creating smtp socket: Address already in use" in the log file. Any ideas how this can be resolved? Every assistance will be appreciated.
    Regards
    Ibe

    Ok the message you are getting should indicate to you that there is a connection being established with the oracle esmtp server. Since you do not see this via the sendmail command. this means your message is not beign delivered.
    here are a few things to check:
    (1) doc id: 251368.1
    (2) doc id: 201209.1
    (3) doc id: 302428.1
    These will more or less take you through configuring rewriting rules for oracle email and a few tweaks on the the sendmail.cf file.
    You may also want to have a look at the :
    /var/log/mail.log file
    This file will contain errors, which should give you an idea why the sendmail command you are running fails.
    Sorry I do not have a an installation with me at the moment or I would have given you the correct location of the log file (which basically means, the location for mail.log or maillog could be incorrect).
    Anyway if you find that the document id's above do not resolve your issue, and you find in the maillog file that sendmail complains about being unable to resolve your locahost - basically your fully qualified domain. The reason for that would be that sendmail uses dns to resolve addresses. However there is a tweak in the sendmail.cf which can make sendmail resolve addresses from your local hosts file.
    Now heres the part i forget. You need to open up sendmail.cf, and look for a line which has the following:
    ServiceSwitchFile=/etc/service.switch
    Or
    ServiceSwitchFile=/etc/mail/service.switch
    If this line is commented, you need to uncomment it and make sure it ServiceSwitchFile points to a valid file name. If the file does not exist, create it, and put in the following (on a line by itself):
    files
    Now test the sendmail -v command (make sure you have the rewriting rules and the -k option for esmtp set in your sendmail.cf first - see the doc id's above). If you see a connecting being established with the oracle email server, you should now find that the ocs email address you have sent the email to has recieved a message in his/her inbox.

  • Mac calendar does not send invites

    won't do it from mac calendar or icloud calendar
    SM

    iCloud calendar doesn't send invitations to Gmail users...
    FIX: iCloud Calendar Invites Not Sending

  • Create Project trough enterprise project type with templates does not send notification to team member(email) when published

    Hi All,
    I encountered this issue in my client site when implementing project server 2013.
    At First I thought that this issue occurred intermittently , sometimes project creation (create project from PWA- assign resources with team member -save and publish) trigger email notification to the assigned team member and sometimes not. (new task notification)
    I have checked with our infrastructure team and verify that I use the right SMTP server address and port , and cross check with them for their side configuration (exchange) , we did not find anything wrong on both settings.
    and then we found out that the failed notification email comes from project creation using defined project templates in an enterprise project type, even from a project that consist of template schedule , we added new task on that project and assign a team
    member on that task that resulted with notification sent to the team member, but not with task that comes from templates.
    can someone help us on this issue, or is there any CU on this?
    I appreciate any comments and feedback, Thanks for your attention!
    Regards,
    Nugroho
    EPM implementator

    Kirteshtiw,
    Yes we did create the template from project professional and as far as i know,
    the only way to create template is just to save it, no option to publish the template.
    When you create a new project from template for some of the task you remove the resources then assign resource to those tasks then save and publish the project.
    <--there are no resources assigned from the template, when i assign resources (new assignment) this will not trigger notification
    Or create a new task under summary task assign resource then save and publish the task you notification sent to the resource means it is working.
    <--new task (not from template ) also trigger the notification

  • My calendar does not send meeting invitations

    I selected my info. contact for myself, and I can receive invitations from other iphones, but when I send an invititation, nothing happens.

    Hello Markcon,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning calendar issues:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/TS3999
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • URGENT: createSubscription does not send notification

    Can anyone help me i am creating a subscription with
    ISubscription subscription = subscriptionManager.createSubscription(
                        resourceContext               // resource context
                        , sName                         // name
                        , condition                    // condition
                        , resource                    // resource
                        , channel                    // channel
                        , recipientListTmp           // recipient / recipient list
                        , attributes               // attributes
    but some recipients receive a notification and some dont
    Can some one help me with an example.
    Please help,
    Filipe

    Hi domschi,
    As I understand, you didn’t receive email generated from Create Upgrade Evaluation Site Collections timer job. While you might receive email generated from Delete Upgrade Evaluation Site Collections.
    When you request an evaluation site collection, the request is added to a Timer job
     which runs once a day. You will receive an e-mail message when the upgrade evaluation site is available. This might take up to 24 hours. The message includes a link to the evaluation site. Upgrade evaluation site collections are set to automatically
    expire (after 30 days by default).
    Please go to CA > Monitoring > Review Job Definitions, locate issue timer job and click Run Now. Then go to Job History and check if the issue job failed to run.
    Also, please check if the email are received by Exchange Hub server.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • My iPad 3rd gen does not send emails post newest update. Please help

    MY 3rd generation iPad has stopped sending emails, it all started after the most recent apple update, 3/22/13.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Setting Up An eMail Account
    http://support.apple.com/kb/ht4810
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Shared Variable does not update when typedef is changed

    I have a shared variable of type custom control (typedef made up of a cluster). When I chang the typedef, e.g. the name or type of one of the fields in the cluster, and then save it, the shared variable does not update to reflect this change. That is, if I place the shared variable on my block diagram and do a "UNBUNDLE BY NAME" on the output, I see the old fields. I have to go back to the properties of the shared variable, change its data type, apply it, then go back and change it back to my custom control.
    Anyone else seen this behaviour? Anyone know how to get the shared variable to update without going through this procedure?
    Bill
    “A child of five could understand this. Send someone to fetch a child of five.”
    ― Groucho Marx

    I guess I should have included this information:
    LabVIEW 8.2.1 using Project Explorer.
    “A child of five could understand this. Send someone to fetch a child of five.”
    ― Groucho Marx

  • My iPad does not send calendar invitations

    My iPad does not send calendar invitations

    Hello Markcon,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning calendar issues:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/TS3999
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

    How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

    zedzed,
    Here's another thought.
    Navigate to HD > Users > Library > Safari: Make a duplicate of History.plist.
    To duplicate the file, click once to highlight it. Press the Command + D keys.
    Drag the History,plist copy file to the Desktop.
    Highlight it. Press the Command + I keys, to get info.
    Change Open With to TextEdit.
    When you open the file in TextEdit, it will be difficult to read, but you will be able to pick out some sites.
    ali b

  • Siri keeps telling me "your calendar does not support location-based reminders" when I ask her to remind me to feed the cat when I get home. My address is in contacts and it has worked previously. Did iOS 8 change something?

    calendar does not support location-based reminders....
    i Just found a similar question below and it resolved my issue. Turn off the sync to exchange email and all works fine now.

    Couldn't agree more.  I've been *trying* to use location reminders ever since buying my iPhone 4S but as yet, out of many, many attempts they've only actually worked once.
    The kid problem is very simple, the way the phone needs the location to be an address in your address book, and it's subsequent inability to correctly locate the address. My home address is a correct postal address, and has been unchanged for 40+ years, yet clicking on my address from my own contact entry puts my location some distance down my street.
    Whilst I understand the issue with the address lookup, it seems to be a massive problem with the location based reminders as it's just not possible to set useful reminders.
    What if I want to remind myself of something when I arrive at the car park on a shopping trip?  There is no address for that in my contacts, I just want to pinpoint the location on the maps and say 'remind me when I get there'.  Surely that's the simplest my far.  Same with address book contacts, if you had a field with the gps position in then one could tag the locations and know they were 100% accurate for location services.
    Such a shame as it's one of the key reasons I upgraded my phone and as it stands it just plain doesn't work.

  • Err while confrm  Business partner  does not exist (Notification E R1 201)

    I am for the first time into CRM serv implementation.I have 2 issues. Please provide your valuable suggestions at the earliest.
    I raised a serv order, released items, confirmed it and changed the status to complete. now when i try to raise an invoice, in billing due list, serv order num is showin up but not confirmation number. Billing relevance in item category for
    service item in Serv order ---> Order related billing acc to order quantity
    confirmation item category--> Transaction related billing after completion.
    The reason i expect is that i have used a crm employee as employee responsible as HR is not yet in place. At the time of confirmation and data transfer to r/3 system is throwing a message that BP doesnot exist. Long text is as follows
    "Business partner  does not exist (Notification E R1 201)"
    I am unable to trace out which BP is it unable to find. The Sold to i am using is on the other hand available in R/3.
    1) Is service confirmation incomplete and hence is not appearing in Billing due list or is there any other reason?
    2) How can i analyse which BP number is not avilable. i.e.. how can i check the contents of bdoc system is sending and because of which value of BP is the transfer getting stopped
    Regards,
    Kiran

    Hi
    The link is not working.
    The contents of the message is as follows
    follow all the following steps
    Setting up Transfer of Employee (HR Master) from R/3 to CRM
    1. Logical system XXX assigned to R/3 client XXX. Logical system YYY assigned to CRM client YYY – view through SCC4
    2. Create RFC Destination YYY for CRM client YYY in R/3 and
    Server ID with user details and client YYY.
    3. Transaction code SALE : Application Link Enabling (ALE) &#61664; Modelling and Implementing Business Processes &#61664; Maintain Distribution Model and Distribute Views. (Direct transaction code : BD64)
    Go to change mode and select ‘Create Model view’.
    You get a popup. Fill in the details – Technical name, short text and validity
    Select ‘Add message type’ from the application tool bar.
    Fill in the following details
    Model view : HRCRM
    Sender logical system : XXX
    Receiver logical system : YYY
    Message type : HRMD_ABA
    Note : Only this message type works for employee transfer.
    4.Save the model. From the same screen select the distribution model and from the menu Environment &#61664; Generate partner profiles
    Don’t change anything in the next screen. Simply Execute.
    4.Distribute the distribution model HRCRM
    Select the distribution model. From the menu bar, Edit &#61664; Model View &#61664; Distribute
    You get a dialog showing the receiver logical system. Execute.
    You get a log ‘Model view HRCRM has been created in target system YYY
    5.Go to the CRM system and check up whether this model has been created.
    Transaction code BD64
    The model has got copied. No changes can be made in CRM
    6. Generate partner profiles for the distribution model in CRM by selecting
    Environment &#61664; Generate partner profiles.
    In the next screen, do not make any changes and Execute.
    Partner profiles can be seen in transaction WE20
    Delta Download Settings
    7. So far, the above settings will ensure the initial download. However for any changes / new employees to be transferred, i.e delta changes, changes pointers need to be activated.
    In R/3, Transaction code SALE, Application Link Enabling (ALE) &#61664; Modelling and Implementing Business Processes &#61664; Master Data Distribution &#61664; Replication of Modified Data &#61664; Activate Change Pointers – Generally (BD61)
    This activates change pointers globally for all message types.
    8. In R/3, Transaction code SALE, Application Link Enabling (ALE) &#61664; Modelling and Implementing Business Processes &#61664; Master Data Distribution &#61664; Replication of Modified Data &#61664; Activate Change Pointers for Message Types
    Activate change pointer for message type HRMD_ABA
    9. CRM : Number Assignments. Generally, there are 3 types of number assignments (also called switches) when business partners are created.
    1 – The system uses the number from the general internal interval of the number
    range object BU_PARTNER
    2 – The system uses the number from a specific internal interval of the object
    3 – The number is transferred from HR and a prefix is added. In this case, a specific external interval, which must be defined as XX00000000 (upto
    XX99999999), is used (where XX denotes any two letters).
    The number range object for all switch positions is BU_PARTNER, with the interval depending on the switch value.
    For switch value 1, the system uses the internal standard interval, otherwise for switch values 2 and 3 you must also create a grouping (transaction BUC2) for these intervals. For the system to be able to connect the grouping and the number range interval, the name of the grouping must be exactly the same as the name of the corresponding number range interval (the name of the grouping is contained in the first column of the table). If you select 3 (HRALX/PNUMB = 3) for the number assignment of busienss partners of the employee role, create HRALX/PSUBG switch manually in table T77S0.
    In table T77S0, HRALX/ONUMB is used to set the number assignment for organizational units and HRALX/PNUMB is used to set the number assignment for employees.
    Create a number range ZZ
    Transaction code BUC2. Create a grouping of the same ID as that of the number range. Eg. Number range ID : ZZ and grouping ID should also be ZZ
    In table T77S0, maintain the following combinations
    HRALX-PNUMB = 2
    HRALX-PSUBG = ZZ
    10. Make the following customizing changes in CRM
    Transaction code SM30 : Table T77S0
    Group Sem Abbr Value Abbr
    HRALX HRAC X Activate HR Integration with CRM
    HRALX OBPON ON Activate integration between Business partners and Org Units
    HRALX PBPON ON Integration between business partners and employees
    HRALX OPROL BUP004 Role definition for org unit – Business partner
    HRALX PPROL BUP003 Role definition for Employee – Business partner
    HRALX ONUMB 1 Number range assignment for org units
    HRALX PNUMB 2 Number range assignment for Employees
    HRALX PSUBG ZZ Number range grouping only if PNUMB is not 1.
    11. Create Employee Master in R/3. Employee master consists of Infotypes. The mandatory infotypes are Actions, Address, Personal data and Organizational Assignment. You can ignore the remaining. Click on next and dont save the other infotypes.
    Transaction code : PA30
    12. In R/3 Initial Download : SE38 – RHALEINI
    Plan version : 01
    Object type : P – Person (always)
    Object ID : Employee ID eg. 1
    Receiver Partner no. : YYY
    Select further details
    You get all the data transfer details
    13. In CRM, transaction code PP01 – View HR Master objects
    You see that the employee 1 has got transferred. To see the corresponding business partner go to the infotype Relationships (the first row)
    Screen 2 gives you the business partner ID in CRM
    Regards
    Rekha Dadwal

  • After upgrading to mountain lion my calendar does not print in weekly mode anymore

    after upgrading to mountain lion my calendar does not print in weekly mode anymore

    I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
    Could be the Mountain Lion objective-c framework has a buffering issue.
    Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
    Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
    My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

Maybe you are looking for