Shared drives and access restrictions.

Hi, everyone.
I have set the hard drives in two of my computers as shared drives so that I can access their contents from a few different computers in my small network. I usually access these files with a MacBook Pro connected wirelessly through an airport extreme base.
How can I assign restrictions to this access so that others don't have access to the drives' contents ? Is it possible to restrict access to certain computer names and/or IP addresses ? What is the best way to handle this ?
Thanks in advance for your answers.

Whether or not you can access devices on your cabled network via the Airport Base Station is not dependent on whether or not wireless security is configured on that base station. Instead, it requires disabling the router built into the Base Station. See the article ABS as a wireless access point

Similar Messages

  • I can't access shared drives and printers

    My home has been wired with ethernet cables, so there are ethernet jacks in every room. There is one central place where they all the ethernet cables meet to connect to a hub and a cable modem. At this central place I have a D-Link 802.11g router connected to the hub. At the other end of my home I have a Airport Extreme base station connected to an ethernet jack. I have WEP password on the base station.
    My problem is that when there is a password on the base station I can't access shared drives and printers. I can only acces them if I am connected with a wire or I connect to the secured (password) D-Link Wifi router that is connected directly to the hub.
    What do I need to do to be able to access the shared drives and printers and keep my base station secured?
    Thank you.

    Whether or not you can access devices on your cabled network via the Airport Base Station is not dependent on whether or not wireless security is configured on that base station. Instead, it requires disabling the router built into the Base Station. See the article ABS as a wireless access point

  • How do i use a time capsule as a shared drive and back it up to another time capsule using time machine ??

    how do i use a time capsule as a shared drive and back it up to another time capsule using time machine ??

    You cannot backup network drives with Time Machine.
    You can simply setup the TC in the network.. it is a shared drive.

  • HT5260 Hi, my name is Gerard and my iphoto library is getting very large I would like to know if I can store all or most of my photos in a external hard drive and access them from Aperture?

    Hi, my name is Gerard and my iphoto library is getting very large I would like to know if I can store all or most of my photos in a external hard drive and access them from Aperture?

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • I want to put an iso image on my hard drive and access it from desktop

    i have a cd with an iso image
    i want to mount the image on my hard drive and access from my desktop.
    Can any one advise how to do this?

    Thanks again for the advice.
    i have lost several hours trying to get the free download of the latest Daemon to function.
    i eventually sucumbed to buying the full Mac version.
    i made a mistake in my email address and cant find a way of using the order number to effect a download.
    i have emailed Daemon with my details and optimistically await their response.
    Thank you again.

  • Can I connect an externa hard drive and access files from 2 or more computers wirelessly?

    Is there a way to connect an external hard drive to my linksys modem and access the files wirelessly by 2 or more computers?
    I have a wireless G wrt54G modem working on windows XP a desktop and laptop on my home system. I have a WD “my book” external hard drive with a usb interface. My modem does not have a USB interface.
    At work I also have 4 laptops  using XP and vista and looking to have them all access an external hard drive and printers. I have not selected a hard drive for the work system.
    If yes can I add 2 or more printers and print form all connected computers?
    If yes, is it possible to access the files of the external hard drive (home system) via the internet?
    Thanks in advance for all your help

    First, your WRT54G is a router, not a modem. Different function.
    Yes, you can  "connect an external hard drive... and access the files wirelessly by 2 or more computers," just not that external hard drive. You need one that supports network attachment, with an ethernet connection.
    And you can print to printers from various computer, again if the printers are made to support that.
    The answer to your last question is maybe. Oh, it's definitely possible, but may require learning about static IP addresses, dynamic DNS, firewalls, port forwarding, file sharing...

  • How do I setup music files on a shared drive for access on my apple tv

    I am trying to set up music files on my shared wifi drive on my home network for accessability through the computer icon of my apple tv.....can someone tell me how to set up the files on the shared drive....right now, the apple tv will not recognize the music i have there to play it.

    Welcome to the Apple Community.
    You can put your music anywhere, but it must be part of an iTunes library and iTunes needs to be running for the Apple TV to play it.

  • Store music on a network drive and access from different computers

    hi!
    i have several mac's and windows pc's here and a windows server. i want to store my music on the server and let all itunes' access the same library to have ratings etc. all the same on all machines.
    when i set the itunes folder to my network drive and open itunes it does not find any of my music.
    my next idea was to run itunes on the server and to use the music sharing function but my macs can't access the windows itunes library because of some error -3259. my windows itunes can access the windows itunes without problems, the imacs itunes can't
    anyhow its a bad solution when i have to sync my ipods with the server since this one is in the basement
    does anybody know something about itunes libraries on a network drive ?
    thanks a lot
    philip

    Hi !
    Did nobody has developed a kind of sync tool yet ? Its interesting to know that the library is always stored locally. I think it should be possible then to copy the library from one computer to all others only the network name must be the same on all computers.
    I'll try it

  • Session and Access Restriction

    Hi:
    I have this problem with access restriction. I was trying to build a "secure" site with sessions where users are able to login and access secure webpages upon successful login. And these webpages are not available as soon as the user session expires or terminated. However, from time to time, these web pages are still accessible after logging out by pressing "back" button on the browser or book-marking these pages.
    I noticed that Hotmail and old Yahoo mail system have the same problem as the one that I have just described.
    I am not using https or virtual host or anythind like that, because I didn't have the resource. It is supposed to be a Basic Authentication (login/password) scheme.
    Could any one light me some fresh ideas?
    Thanks
    Tian Lei Xia ":)

    To avoid the bookmarking problem, set a session attribute with the login details.
    Once they login:
    if(request.getParameter("username")!=null)
         session.setAttribute("username","personA");
    if(session.getAttribute("username")==null)
         //don't display the page
    else
         //show them the pageThis is a very basic technique and there are other ways of doing this. As for logging out then the session should just be invalidated.
    An alternative would be to use the security features of the web deployment descriptor and get the web container to handle the sessions for you (See servlet API specs 2.3 for more details).
    Good luck,
    Anthony

  • Is there a way to store ITunes movies on an external wireless hard drive and access them from my IPAD.

    I am on deployment with VERY limited internet access. I have gone through all the movies on my IPad and would like to have access to the rest of my movies at home.  Is there a way for my wife to load ITunes movies off my Mac at home to an external hard drive, send me it to me and then I can view them from my IPad? How do I set up the IPad to look for the movies on the drive?

    No. An iPad does not have the capability to read data from an external HDD. You need a computer running iTunes to sync the movies to the iPad.

  • Hide "Users Shared Drive" and "Network Icon" on the Finder

    Is there a way to Hide the Blue Highlighted Icons or Make it invisible on Finder. Thanks for the help...

    Finder -> Preferences -> General -> Show these items on the desktop and uncheck the 'Connected Servers' option.
    Alternatively, if you want to leave other servers showing, you can manually mount the volume at any other point, bypassing the /Volumes directory:
    mount smb://server/sharename /some/other/mount
    This should mount the share at the path /some/other/mount rather than at the default /Volumes/sharename

  • Is it possible to access a single Lightroom catalogue mounted on a shared drive from multiple computers, each with an individual Lightroom install?

    Is it possible to access a single Lightroom catalogue mounted on a shared drive from multiple computers, each with an individual Lightroom install?
    Thanks.
    Steve Greenberg

    No, Lightroom catalogs cannot be on a networked (shared) drive, and they do not support simultaneous multi-user access

  • How do I store my iTunes library on an external drive and can I still access it as I would if it was still all sitting on the mini mac?

    The mini mac is full and I want to be able to use the 2 tb drive as storage and time machine. How do I get the content onto the external drive and access it it and hoe does new content get downloaded and stored to the drive not the mac? Also can I have 1 drive playing storeage and back up or do I need a second? Basic questions I suspect but not to me!

    1. Drag the library to the external drive, launch iTunes with the Option key held down, click on Choose Library, and point it there.
    2. Get a second. Having the backups on the same drive as the original data won't help when that drive fails.
    (66929)

  • Schedule webi document to printer and save the output in shared drive

    Hi all,
    Is it possible to schedule a webi document via java BOE SDK, run at once, save the output in pdf format in a shared drive and at the same time, send the output to printer? Or I need to run the webi document to run 2 times? Thanks.
    Best regards,
    Grace

    Hi Adam,
    How about can I schedule a webi document to printer only? In Crystal report, I can do this but seems for webi, no such function?
    Best regards,
    Grace

  • Problem creating pfile on a shared drive directory.

    Gurus,
    I am trying to create a pfile from spfile on a shared drive and I am getting the below error. This is a 10g databases on windows 2003 server with the ASM.
    SQL> create pfile='\\dev_server\c$\temp\initstandby.ora' from spfile;
    create pfile='\\dev_server\c$\temp\initstandby.ora' from spfile
    ERROR at line 1:
    ORA-09210: sftopn: error opening file
    OSD-04002: unable to open file
    O/S-Error: (OS 5) Access is denied.
    I gave full permisions to every on the temp directory and still I am having the issues.
    Any help is appreciated.

    Yet again an example of how easy it is to become 'guru': simply read the documentation and you will be one, because almost all people asking questions here are asking doc questions.
    To make this work you need to make sure the OracleService<SID> is running as a domain administrator account.
    By default Oracle runs using the local administrator, which doesn't have access to remote drives.
    For further details see oradim runas= etc.
    Sybrand Bakker
    Senior Oracle DBA

Maybe you are looking for

  • IPad 2 restore issue.

    i wonder is anyone can help. after having my iPad 2 for 3 years with no problems, suddenly it just got stuck on the Apple logo and would not charge up. Aftear assuming I had somehow damaged the mains port, I took it to an iexpert who took a look and

  • Background Processing, Selection Screens and Variants

    Hi All, I am having a little trouble Background Processing with Selection Screens and Variants. When a user runs my report and selects the option of background processing, then they select a checkbox. Once this is checked, they should go and fill in

  • Phone wont connect to Desktop Manager

    i have both the latest upgrades of the Desktop Manager and OS on my 8330 curve when i connect it to my pc via usb in the bottom corner it shows just connecting. it never actually connects i used windows XP 32bit

  • BEx Displays Wrong Values After Reloading InfoCube

    I am very new to all of this, so there is a good chance I have just done something stupid.  I have an InfoCube in which I deleted all of the data, and then reloaded it with corrected data from the PSA.  If I look at the raw data in the InfoCube, it l

  • ABEND RS_EXCEPTION (000): Part-field access (offset = 45, length = 45) ...

    Hi BI Experts, We are getting error below when run the query in BEx Broadcaster whereas the same query can be run without error in RSRT. One of the object used in the query is 0TCTBISBOBJ (BI Application Obj). When i remove this object from the query