Shared Droplet for converting 30i to 24p

Hey --
Just thought I'd share this. I created a droplet for compressor that you can drop 30i material into it and it will convert the material (audio and all) to 23.98.
It does it not by removing frames, but by using Compressor's Optical Flow technology to rebuild frames to create 'new' material.
The goal was to incorporate old 30i material into a working project being done in 24 and try to make it as smooth as possible.
I've tested it out on various sources and seems to work very well.
This is not to say it is better or worse than other options out there... just another one that seems (for me) to work VERY well.
Be prepared... it is a render nightmare! But the good thing about it is it will batch if you've got lots to do.
So by clicking this link it will immediately begin the download:
http://homepage.mac.com/captmench/FULLConversion.zip
Enjoy
CaptM

Sweet! Thanks.
But, umm, for those of us who are totally clueless: Where do I put this? <smile> Sorry.
I downloaded it in case I ever need it. Not doing anything right at this exact moment that requires it, but just in case.
Thanks again!
~Luke

Similar Messages

  • Droplet for animated giff in Photoshop?

    Is it possible to set up a Droplet for Photoshop that could receive multiple files and export them out as one animated gif?
    I am trying to place three files into a Droplet I have made for Photoshop with the Actions set so that it converts them into a three frame animation but it doesn't work.
    The Actions I have set up are:
    Create Frame Animation
    Make Frames from Layers
    Set Selection:- To: all
    Set current animation frames:- To: animation frames   Delay: 3
    Are the actions wrong or is it not possible as a Droplet to do this?
    Thank you

    That will get ugly... You will have to open them up individually, use the animation timeline in frame mode and then use copy&paste frame by frame. The other option would be the frames to layers conversion, but it would similarly entail shuffling around many layers. You'd have it much easier if your images were genuine video files. That way you could simply load them as video layers and treat them as self-contained whole entities...
    Mylenium

  • Call Pipeline in orchestration for converting XML to flat file

    Hi ,
    Can we call Pipeline in orchestration for converting XML to flat file ?
    Or we have some another option for this task ?
    Prakash

    Hi,
    You can refer this article from Abdul Rafay on how to work with Flat files and how to call receive and send pipelines within your orchestration. He
    has provided detailed step by step explanation of the process.
    Calling Send and Receive Pipelines
    from the orchestration expression shapes
    The code shared by Abdul at http://abdulrafaysbiztalk.wordpress.com/files/2009/06/processingflatfiles.doc (Change the extention to rar) and try it.
    One common mistake I have seen people doing will working with Flat File Assembler is that they miss to set the Document schema property in the Properties
    window to the flat file schema.
    If the Document schema property is not specified, runtime schema discovery will be attempted. During schema discovery, BizTalk Server attempts
    to determine the correct flat file schema to assemble the message with, based on the namespace and root node of the message, its added performance hit.
    Rachit

  • Reference Library for Converting Between LabVIEW and XML Data (GXML)

    Please provide feedback, comments and questions on the Reference Library for Converting Between LabVIEW and XML Data (GXML) in this thread.
    The latest version of the NI GXML Library is availble in VIPM on the NI LabVIEW  Tools Network repository.

    Francesco, Thank you for the feedback.  With this component it was my intention to make a more "terse" version of the LabVIEW Flatten to XML VI that was also supported on RT and that gave the user more flexbility regarding the structure of the parsing type definition. I think you are right that the XML parser is not compliant to section 2.11 of the XML spec.  The parser does specifically looking for a #D#A and this appears to be an oversight on my part.  Please confirm for me, the specifcation is saying that the XML parser should be able to recognize three possibilities as an "end of line" character: #D#A, #D, or #A.  Am I reading this right?There are more efficient (and in some cases much more efficient) ways of sharing data between LabVIEW and LabVIEW: some examples are flattened binary strings and the datalog binary format.  XML is slower than these optons but the upside is that it is human readable.  Furthermore XML is inherently hierarchical which is convenient for complex data structures like clusters of arrays of clusters, etc.  If you don't care about human readability then you are correct XML doesn't make as much sense.I will return to the GXML source code and try to fix this in the near future but I would hope that instead of creating yet another custom VI from scratch that you could reuse what I have provided for you.  I included enough documentation in the source code so that users could make some modificiations themselves. The target application for this reference library was LabVIEW to LabVIEW communication.  As such I documented the schema on the dev zone document from a LabVIEW perspective.  It includes all the supported datatypes and all the supported data structures (cluters, arrays, multidimensional arrays, clusters of multidimensional arrays, etc.)  I do see some value in making a more conventional XML spec but the time investment required didn't really line up with my intended use case. Were there any other downsides to GXML that I have missed?  Best Regards, Jeff TippsSystems Engineer - Sound and VibrationMessage Edited by Jeff T. on 04-21-2010 10:09 AM

  • Report for converting the documents into the PDF format.

    Hello Experts,
    I need to know if any report/ T-code is available in SAP to convert the files into  PDF format.
    We are processsong these PDF's then into IXOS system.
    Regards,
    Anna.

    Hello ,
    You may check with the below programs:
    Program name                   Report title
    RSTXCPDF                       Routines for Converting OTF Format to PDF Format
    RSTXPDF2                       Administration/Upload of type 1 and TrueType font files
    RSTXPDF3                       Customizing for OTF-PDF Conversion
    RSTXPDF4                       Help Report from CONVERT_OTFSPOOLJOB_2_PDF
    RSTXPDF5                       Help Report from CONVERT_ABAPSPOOLJOB_2_PDF
    RSTXPDFT                       Test report for PDF conversion - converting standard texts to PDF
    RSTXPDFT2
    RSTXPDFT3                      Test
    RSTXPDFT4                      Convert SAPscript (OTF) or ABAP Lists Spool Job by PDF
    RSTXPDFT5                      Test: GUI Download of Spool Request
    Regards
    Ramesh Ch

  • Can Adobe Distiller be used for converting all pro/e (3D -2D)  files to pdf format?

    Can Adobe Distiller be used for converting all pro/e (3D -2D)  files to pdf format?

    Acrobat Distiller Server converts Postscript to PDF.

  • Hello, I have two questions on time capsule  I can only have it on my external hd files and free up my internal memory to my mac  I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

    Hello, I have two questions on time capsule  I can only have it on my external hd files and free up my internal memory to my mac  I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

    I have a mackbook pro and an iMac if I buy a time capsule 2tb airport, I can use it with time machine and what would be the best way to use it.
    There is no particular setup required for TM.. both computers will create their own backup sparsebundle which is like a virtual disk.. Pondini explains the whole thing if you read the reference I gave you.
    and how to use time capsule airport whit other external hd to use my old lacie airport with the new time capsule
    Up to you.. you can plug the external drive into the TC and enjoy really slow file transfers or you can plug it into your computer and use it as external drive.. which is faster than the TC.. and TM can include it in the backup.
    Again everything is explained in the reference.. you are not reading it.

  • Is is possible to use creative cloud as a shared volume for collaboration between incopy & indesign?

    I'm a designer student and as a designer, I constantly have to make decks for presentations.  I typically work in a group of six and because I'm confident with graphic design, I tend to be the leader of these tasks.  I've found the best workflow for slide creation is Indesign.  Unfortunatly, I'm just an awful writer— so when I heard about Incopy's collabrative features(saw the post from indesign's facebook page) I saw oppertunity and got very excited.  My teamates and I typically all have subscriptions to adobe cc because of this, I was wondering (since I havent used it at all) if the storage given out from adobe cc was able to be that shared volume that is required for the live link between incopy stories and indesign layouts.
    Therefore,
    Is is possible to use creative cloud as a shared volume for collaboration between Incopy & Indesign?
    If this needs any further clarification I'll gladly write a more detailed question — lastly, if this is not possible might you suggest an alternative?  Please assume that we go to school together but we work offsite also.

    You will not be able to use the Files page at https://creative.adobe.com/files for collaboration in this way. But you can share individual files in this way.
    When folder sharing is available this will be possible.

  • Screen Sharing works for alien hosts but not for LAN hosts

    Hello!
    I am having a really strange problem in a customer network. The network is a local private network with one MacOS Server 10.6.8 and around 12 iMacs running MacOS 10.6.8. The server is running headless in cellar so the user maintain the backup via screen sharing from an iMac to the server.
    Since a few weeks they can not login to the server via screen sharing from any local host BUT I can login from my MBP (alien) via ARD or Screen Sharing without any problem. Even hosts connected to the network via VPN can connect to the server via screen sharing.
    In short:
    Every local host gets a message that login is not possible and my MBP and VPN-hosts get connected without any problems with the same credentials.
    At the local clients I get this message in system.log:
    Oct 28 09:33:41 verwaltung1 LKDCHelper[228]: Starting (uid=501)
    Oct 28 09:33:48 verwaltung1 com.apple.launchd.peruser.501[166] (com.apple.Kerberos.renew.plist): Throttling respawn: Will start in 530 seconds
    Oct 28 09:34:17 verwaltung1 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[195]: CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
    and at the server I get:
    Oct 28 09:33:48 solserv AppleVNCServer[11503]: no such user: adminloc@LKDC:SHA1.DE03ABCC86F74D11AD139E44388D6B94155B4D9E: 2
    When I connect from VPN or my MBP I get no messages in system.log.
    I tried to kickstart ARD at the server but it does not change anything, I bound the clients to OpenDir of the server with no effect also.
    I do not have any idea what is happening here. Every help is welcome,
    Christop

    Hello MrHoffmann!
    changeip says "The names match. There is nothing to change."
    To give more infos, the server and all the clients are connected to the same network switch, all belong to 192.168.183/24 and when I use my MBP, it is connected via WLAN and gets an IP-address from this server with an IP from this range. my MBP is in the same broadcast domain.
    VPN clients connect via PPTP to the gateway (192.168.183.1) and get IP addresses assigned from 192.168.183.48-52.
    There is no routing between the clients and the server.
    There is no other problem - every client reaches the server for file serivces (AFP/SMB), smtp, imap, DHCP and DNS.
    BTW. screen sharing from the clients worked without a problem when I first setup the network about 1 year ago, but since a few weeks no client that belongs to this network can use screen sharing except for my MBP when I am at customer site.
    History:
    The new SLS is a replacement for an old Windows 2000 Server. Both servers ran in parallel for some time but within different IP-networks (all Macs at 192.168.183/24 - all Windows at 192.168.2/24) the gateway routed between both networks. But now it is time to switch off every windows computer because every service now runs at the SLS. AFAIK the windows 2000 Server is the last Windows machine in the network. We switched off DHCP at the windows server and switched on DHCP at the SLS a few weeks ago. Hm .... maybe there is something wrong? But the clients have fixed ip-addresses.
    Still wondering what is going on here, bye,
    Christoph

  • Creation of program for converting the invoices in the PDF format

    Hi Guru
    Can any one tell me any standard prog. for converting the invoices in the PDF format.
    All invoices should be send through FTP.
    Plz help.
    Thanks

    u can use FM.
    CONVERT_OTF which convers OTF code into PDF afterthat u can download or do FTP.
    check sample flow.
    Re: how to convert po to pdf
    Regards
    Peram

  • What's the best Bluetooth file sharing app for iPhone

    I'm trying to find a good BT file sharing app for an iPhone 5. I've noticed that the iPhone 5 won't even detect devices such as other phones or computers with BT but seems to have no issue with BT accessories such as satnav. My iPod touch has no problem detecting any BT device which seems odd.
    So, is there a good BT file sharing app availble for an iPhone 5?

    You won't find any Bluetooth File Sharing app that will work with non-iOS devices. That is something iOS simply does not support.

  • How to set up a basic file sharing server for my small architectural business?

    I have no idea if I have posted in the correct area as this is my first forum post within the apple support community!
    I have been using a 21.5" imac running 10.6.8 for the past 5 years to run my small home based architectural design business. I have been using the internal hard drive & backing up the necessary data to a simple usb external hard drive. I am now looking to firstly purchase a new imac 27" retina and purchase new autocad lt 2015 for mac software. I am looking to have another imac (my old mac) running in conjunction with the new mac. I want both macs to be able to access the same data and am slightly unsure what is the best way to achieve this.....As my old mac is currently only running snow leopard and an old version of autocad for mac 2011 it wont run on any more recent OS. Essentially i believe I have 2 main options with this.... (1) I Accept that I have to purchase 2 no. autocad lt 2015 licences @ a cost of £2300. Or option (2), I only run autocad on the new mac as this will be the primary station and the old mac used for primarily for admin & accounts. I have also recently discovered that it is possible to rent autocad licences for £300p/a which may also be another option (3)!
    I previously had a problem where my hard drive failed on my mac & lost all data on the internal hard drive, luckily I had been backing up all data regularly to my external hard drive and now loss occurred! Obviously with any new system I want to ensure that my data is safe!
    I currently utilise about 250GB of data for business operations but this will obviously grow with time.
    In the future I would like to have the option of potentially being able to access the network data remotely via macbook pro whilst abroad although at this stage this really isnt my primary objective. Although I believe I could achieve this through apple remote desktop.
    I suppose I should provide some information with regard to the required speed of the system...I regularly open 50-100 photos at the same time totalling around 250-500MB. I would like the system to be able to handle this fairly easily.
    I have been trawling through forums and to be honest they are totally confusing me. I have also spent time on the phone to the apple business team and have also discussed my objectives with a member of the apple team in store.
    There have been various options advised to me and I really do not know which is the most appropriate route forward.
    1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
    2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
    3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
    4 - Using a RAID based server and linking the 2 no. macs.
    Sorry to ramble but any advice really would be greatly received!

    Hi sblemings,
    Welcome to the community.
    I think with your scenario you should ask yourself, how complicated do you want the setup to be and how much time would you have to be able to resolve an issue should one occur with this setup.
    All the options that have been advised would work but they come with complexity and therefore time.
    1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
    2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
    3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
    4 - Using a RAID based server and linking the 2 no. macs.
    Sorry to ramble but any advice really would be greatly received!
    option 1
    Would be a way to achieve what you want, it would centralise your files and you would only need to backup your file server (as long as all the files you wanted backed up were on it). This could be achieved either using the client and sharing various folders or using Server which would give you more options than you would possibly need.
    option 2
    This is exactly like option 1 except that you wouldn't have to administer another mac however you may limit any future growth.
    option 3
    This option I probably wouldn't pick, you could achieve this with firewire and use a firewire to thunderbolt adapter (saves you having to buy a new iMac)
    option 4
    This option would, depending on your RAID level, give you disk redundancy but remember you would still need to back this up, as RAID is NOT a backup solution.
    I would also ask is there a pressing need to keep the old iMac in service and complicating things by having a server / NAS? Could you not just transfer all your information over to this and continue with the one backup? I would say that doing it this was would be the simplest way of achieving what you want from what I can take from your question.
    As for remotely accessing your data, if you have the right hardware the way to achieve this would be to use a VPN and connect back to your data. However a potentially easier way for you ,would be to use a service like logmein or teamviewer to connect back.
    Hope this helps, and by all means any questions please ask.
    Dan
    How to set up a basic file sharing server for my small architectural business?

  • In the old Mobile me storage I had shared storage for my family and all of our devices. How do I breakup the 55GB across my apple accounts now that iCloud is by device by user?

    In the old Mobile me storage I had shared storage for my family and all of our devices. How do I breakup the 55GB across my apple accounts now that iCloud is by device by user? Anyone else have this issue. I am also in need of correcting the storage from my work where I do not have Safari or I can not down load iCould to my desk top.

    That storage moves to master account. Since there are no accounts like that in Icloud, people in your family will enjoy complimentary 5 gigs from Apple and they will let you know if they need anymore. You will not be able to manage storage from windows desktop

  • In August installed PE12  on Windows Vista with incorrect Sharing Preference for Email Client. Shows default Adobe Email Service How do I change it to Windows Mail?

    Had PE6 previously to installing PE12 on Windows Vista.  PE 12 installation went OK except for the Sharing Preference for the Email Client. Existing  PE12 client is the default Adobe email service not the correct Windows Mail for Vista. How do I make this change..

    Hi,
    I think that for PSE 12, you may need to switch to Windows Live Mail
    http://www.microsoft.com/en-gb/download/details.aspx?id=29224
    You may find that you then also need the following fix.
    Freeze or error “There is no email program” | Share via email | Elements Organizer | Windows 7
    I think that the problem is that the new versions of PSE do not know where to look for the mail client.
    Brian

  • I downloaded the updated Firefox, but the ad-on for converting YouTube music videos to mps files is now unavailable. How do I get it back? Why was this feature disabled?

    I downloaded the updated Firefox, but the ad-on for converting YouTube music videos to mps files is now unavailable. How do I get it back? Why was this feature disabled?
    In the former Firefox version there was a box to click for converting YouTube music videos into HQ mp3 files. That box is no longer apparent in the new Firefox version. I went back to Ad-On s and re-downloaded the program YouTube to MP3 1.2. It says it's not compatible with Firefox 6.0. Can I reinstall the older version of Firefox?

    When I clicked on the second site mentioned, I got such EXPLICIT, step-by-step directions!!! Thank you so much. I'd been wondering what that window was that kept popping up with the Firefox icon and that other funny thing. The word *install* was never mentioned. Pictographs were never my thing.
    When I looked under the initial system requirements, it said that OS X 10.4.5 and higher were good for 5.0. I didn't check further. Under your advice, I'll go with the older version. Thank you for taking the time to help me.

Maybe you are looking for