Shared internet: balance of speed

Hi
I'm using an iMac G5 on 10.5, and my wife is using a powerbook with 10.4.
We have a shared internet connection which works all right, but, my connection is the main connection and gets up to 7-800 kb/s, while hers gets 100 or so, but quickly trails down to nothing, so that a system update can't be done on the computer because it times out. Is there any way to allot an equal bandwidth to both computers?

I live in Japan, so all my gear is local brands. This is the one I use.
http://www.corega.co.jp/product/list/hub/fsw5ps.htm
You're right, it is a switch, not a router. My mistake.
The modem is by terayon, whose website goes straight to Motorola's. My internet program is this though
http://www.nirai.ne.jp/english/enint/ensuper.html
It's listed as 30 mb down.
It looks like I will need to buy a router then.

Similar Messages

HT3180 I owned an Apple tv and after upgrade my internet to higher speed my Apple Tv does not work the only message that show on the screen said if time and dates are not found go to apple/support/tv tried almost everything and nothing. Please somebody

I owned an Apple Tv and since I upgrade my internet to higher speed my Apple Tv does not work. Please someone help.

In most scenarios you shouldn't need to forward ports, however if you need to, you may be best contacting your ISP.
As with most router issues, I would recommend that you contact your ISP with details of your problem (assuming that it was your ISP that provided it to you).
There are simply too many manufacturers with different software features and settings and often different names for such features and settings, that the best advice will likely come from those that are knowledgeable about your particular router.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
The following article(s) may help you.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

TS2756 How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

Sharing Internet with xbox 360

Hi, I have my Powerbook sharing internet with my Xbox 360. The connection works well and I am able to play games, but the NAT is listed as Moderate, with a Moderate NAT I am not able to do private voice chats with people. Does anyone know how I can get my NAT to Open? Also, I would like to share my media with my Xbox that is stored on a Windows XP computer. I followed all the steps given at www.xbox.com/pcsetup, but the Xbox still does not see the computer.
Any help would be appreciated, Thnx

If you are using Internet Sharing on your PowerBook you can forget trying to modify NAT settings or make nearly any other adjustments. There are very, very, very few options.
If you want to make adjustments like that you need to get a real base station.

Problems with sharing internet connection via usb

I have been sharing the internet connection on my iPhone 5 via usb to a PC for a few years. When updating to iOS 8.3 and iTunes to 12.1 (from iOS 6 if I remember correctly) the internet sharing through usb stopped working. Sharing through wifi works and settings are the same as when usb internet share did work. Any idea on how to solve this except downgrading?
For my troubleshooting, has anyone been able to share internet via usb to PC (or Mac) with iOS 8 / iTunes 12.
PS I have unliited cellular data and iPhone is my only internet connection at home,

Mark,
There is a excellent book that teaches you how to do this (and other things) called Mac OS X Tiger: The Missing Manual (others of course)
If I remember correctly (book is on loan)
1: System Preferences>Network>Show>network port configurations (click unlock)
2: Click>Built in Firewire and drag to the top of the list (why I forget why)
3: System Preferences>Sharing>Internet>Share your connection from: Built in Ethernet (or what your using for your connection in) >To computers using: Built in Firewire>Start
4: Mac #2>Hook up Firewire 400 cable>System Preferences>Network>Location>New Location
5: Show>Network Port Configurations>Drag Built in Firewire to top of list and enable.
6: I also think you have to enable Personal Web Sharing on the Mac hosting the internet.
anyway play with it, you'll figure it out. if someone doesn't get to you.

Sharing internet between PowerBook and MacBook

I have been trying to set up internet sharing from my old PowerBook G4 on Tiger to my new MacBook on Panther using Firewire. I have followed advice I've found on this but so far nothing has worked. I have turned on sharing in Network Preferences - Sharing - Internet tab on PowerBook (set to share from Airport connection to FireWire) but am not sure if I need to change any settings on the MacBook, which still says I am not connected to the internet when I open Safari.
Oddly, when I go to System Preferences - Network on MacBook, the left-hand service list shows 'Built-in FireWire' as connected and has a green light but Safari still says that my computer isn't connected to the internet. Another strange thing is that the couple of times I've tried to set this up, the internet works (though very slowly) for a minute or two, then it stops working altogether.
Can anyone help with this?
Thanks.

Thanks for your reply. Basically, the screen is faulty on the old laptop so the colours are all distorted
which is why I bought a new one. I do have a wireless router which is also faulty - it won't go into the mode required to add new connections so I am unable to connect the new laptop until this is fixed. The old laptop still has a wireless connection through Airport which is working fine.

Sharing Internet with AirPort

Hello
Okay to start my iMac here is connected directly to a DSL modem with no router through Ethernet. I saw that you can share Ethernet connections and use AirPort to create a Computer-to-Computer network and enable internet connection sharing. Would this work properly with a Windows XP computer with a wireless card in? I want to be able to get that computer on the net.

Okay to start my iMac here is connected directly to a
DSL modem with no router through Ethernet. I saw that
you can share Ethernet connections and use AirPort to
create a Computer-to-Computer network and enable
internet connection sharing.
System Preferences > Sharing > Internet
Share built-in-ethernet connection via Airport.
Would this work properly
with a Windows XP computer with a wireless card in?
Yes, but you won't be able to use a password with an XP PC therefore is not recommended.
I would recommend getting a wireless router.
iFelix

Sharing internet with Windows over AirPort

My G5 tower is connected to typical home router via ethernet. This gives it flawless internet connectivity.
To give better wireless access to mobile devices that come to that room for a visit in the far corner of the house where the G5 is located, I got a used AirPort Extreme card for the G5 and installed it, making sure to attach the antenna connector and small t-shaped external antenna (provided with original G5) plugged in the back.
When I powered the G5 back on, it immediately saw the AE card and told me to review settings and press Apply. Under Network prefs, under "Location: Automatic", I chose "Show: AirPort." An AirPort ID is shown, along with the default setting below: "By default, join 'Automatic.'" I left all other network settings as they are--I am not trying to use AirPort to connect the G5 to the main wireless router, since it already has ethernet.
I went to the "Sharing" pref and chose the third pane under it, "Internet". I configured it to read: Share your connection from built-in ethernet . . . using (checkbox on) AirPort. I clicked on the AirPort options in this same pane, and typed in a network name: "ABC wi-fi". Channel is Automatic, and--to keep things simple for now--I left encryption off. I pressed OK to close that small dialog, then hit "Start" in the Sharing/Internet pane, which makes its status message change to "Internet sharing on: sharing your built-in ethernet connection." Success! Well, no.
The AirPort icon in the menu bar was a blank quarter-pie. So I clicked on it, and saw the "open internet sharing" option. A panel appeared where I could turn airport on. I did. The grayed-out Network line of the pane then showed the name of the network I had created back in the Sharing dialog: "ABC wi-fi." And the signal level indicator shows full power, all to the right. All set? Nope! When I go to my Windows laptop and find this new network, I see two new options: One, strangely, is the "Computer Name" shown in the Sharing pref panel, and clicking on it to connect doesn't work. The other option is the network I actually named and shared, "ABC wi-fi," but when I attempt to connect to it, Windows (actually Intel PROSet/Wireless Wi-Fi Connection Utility) insists on stepping me through a series of complex security settings, when it would seem that no security should be required since I didn't enable encryption on the AirPort connection.
Giving up on those security settings, I go back to the Sharing control panel and turn sharing off. I hit the AirPort options button and turn encryption on I leave on WEP 40-bit, which requires me to type in a five character string. I do so. I click OK and restart internet sharing. Again, I am given confirmation of "Internet sharing on: sharing your built-in ethernet connection." I try to connect from Windows again, but am not even presented with the complex security options. It just says "Unable to connect," even though it can clearly see the SSID. I try the same a few more times--no luck. I go get an iPod touch and select the new G5-based network--type in the five characters required for WEP 40-bit, and jump right on. Why can't my Windows 7 laptop connect?

Good advice from rccharles, do try that, but I'm wondering if it might be related to Digitally sign communications, even though this talks about server & connecting the other way...
http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x

CONNECT HP LAPTOP TO IMAC SHARED INTERNET

hi can somebody please help me with connecting my new HP Laptop G60 to wirelessly connect to my iMac shared internet? I see my iMac on the HP connect list but when i select it ... it doesnt even give me an option to type my secure password. I get an error that it cannot connect.
Please help!
Much thanks !

In case others want help on this. I found the following details also handy:
See: http://echeng.com/journal/2009/07/06/encrypted-internet-sharing-between-mac-os-a nd-windows-xp/
Specifically, step 4 and 6 are crucial!:
1. In Mac OS X, enable Internet Sharing to computers using Airport
2. In AirPort Options, select 128-bit WEP encryption and enter a 13-character password
3. In Windows, add a new wireless network
4. Enter the SSID and select WEP encryption with Shared Network Authentication (not Open)
5. Uncheck “The key is provided automatically” and enter the 13-character password
6. In the Authentication tab, be sure that “Enable IEEE 802.1x authentication” is unchecked
Hope that helps you!

Can't connect through Shared Internet

I am sharing internet via my PPC mini (OSX 10.4.7). However, I am unable to connect my Ichat account on my new Macbook via this shared internet. The Bonjour works fine, though. I would be grateful for any suggestions.

Hi inamacworld,
Have I git this right ?
ISP shared to several Houses of which you share that connection inside the house with at least the landlord and then through your Mac Mini to your MacBook. Is that Correct ?
As this is more of a Networking problem I would suggest going to Tiger > Getting Online & Networking forum to find out about using Internet sharing and it's limits.
9:31 PM Thursday; July 27, 2006

System Preferences Sharing Internet Airport

System 10.4.11
In System Preferences>Sharing>Internet my wife's iBook lists three check box options: Built-in Ethernet, Built-in Firewire and Airport. My Powerbook with the same system does not list the Airport option. How can I add it? Thanks.

I've now found that on my Powerbook the Airport choice shows up if after the "Share your connection from" I chose something other than Airport. Not so with my wife's iBook Airport is always a choice. Now I am confused.

IPhone accessing Mac Pro's shared internet via Bluetooth

I have an iPhone 4 which is running without an ATT contract (no cellular) and acting like an iPod.
I can access the Internet using the wifi arrangements on the iPhone, and this works easily.
But I would like to turn off the wifi on the iPhone and configure the iPhone to access the Internet
via the shared internet service on my Mac pro, connecting via bluetooth.
I am starting to think this is not possible, and the tethering can only go the other way, That is to
say that the iPhone can share it's cellular net access with the Mac via personal hotspot, or possibly
using bluetooth PAN or some other bluetooth connection service.
I have tried creating PAN network interfaces on the Mac Pro, and then I go to the iPhone and set
up a paired connection between the iPhone and the Mac Pro. But I just can't seem to guess the
right set of settings so that the iPhone can use the Mac Pro's internet via the PAN service.
Does PAN service only serve the iPhone's internet to an external device (like a notebook), or can
it be used in the other direction to allow the iPhone to request IP packet service from the Mac Pro?
Thoughts?
Douglas Goodall
Santa Maria, CA

I've been having the same problems as everyone else here. Trying to share internet connection from my ethernet wired iMac to my MacBook and my iPhone. Tried all the workarounds, but nothing works, or lasts very long.
Yesterday, I finally talked with AppleCare for over an hour. All their suggestions (trashing preferences, changing settings, etc.) failed, as well. The AppleCare person then put me on hold to speak to an engineer, who told her that Snow Leopard no longer supports Internet Sharing as of 10.6.1.
Not willing to accept that answer, I had them set up an appointment at the Apple Store Genius Bar for me, and after chatting with the Genius for a while, he also confirmed that Internet Sharing is no longer supported under Snow Leopard. Apparently, there were many hardware issues that the engineers decided to circumvent, and so did not include support for Internet Sharing with the internal airport in Macs. They said that the Airport it is intended to receive, not to send a signals! Yet, it worked fine, doing just that, under Tiger and Leopard! The only fix he could offer was to wipe my drive and take me back to 10.5, which I declined.
However both the guy at the Genius Bar and the lady at AppleCare inferred that Apple "may" release another update to fix this issue, if they get enough complaints and bug reports.
So, there you have it. Apple no longer officially supports Internet Sharing in Snow Leopard.

Sharing internet while hooked up via ethernet

Hi,
I want to hook two computers (one 10.3 one 10.4) via ethernet to each other. I also want to hook one up to an airport via its airport card then share the internet (the 10.4 one is the one connected to the airport).
How would I go about this? I can't figure out how to allow airport connection via tcpip while I'm using tcpip for the ethernet connection.
I am sure this is posted here somewhere but I can't find anything specific (step by step instructcions).
I have figured out how to network the two computers via ethernet.
Thanks!
Misha

Hi Misha,
The exact thing you want to do is configured via:
System Preferences > Sharing > Internet
(Ref: http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh336.html)
In your case you will set this up on the 10.4 machine, where you will share your Aiport connection and allow other computers to connect via the ethernet connection. (ie. airport is set up in Network preferences, and ethernet is set up in Sharing preferences)
Note the advice about turning on Personal Web sharing also. (This should mean your 10.4 firewall will allow pass-thru connections from the 10.3 machine)
Graham

Windows laptops can't connect to Macbook Pro shared internet when WEP security is on

As the title states, my Windows laptops can't connect to Macbook Pro shared internet when WEP security is on. My iPhone has no problem asking for the password when I try to access the shared internet my MacBook Pro on Mountain Lion is sending, but my Samsung Slate on Windows 8 sees the network and only succeeds in connecting when no password is required. When security is on, it just tries for a moment and says it can't connect to the network without ever prompting me for the password. The same thing occurs on my Asus Netbook running Windows XP. Since all the reviews about OS X's internet sharing mentions "any wifi device" can access it, I haven't assumed it's only compatible with Apple products. I want my MacBook Pro to save me from needing an external router.

I would post a new question, outline the specific problem you are having and skip all the extra. Outline any steps you have taken already to try and solve the problem. Post the question in the forum most likely to have followers who can answer your question. Give your topic a good title such as: My MacBook Pro cannot connect to my WEP-enabled PC.
Provide any hardware information that may be relevant such as the make and model of your router and method of connection - wired or wireless.
I'm no authority, but have you tried using WPA2/Personal on your PCs? This method is most compatible with Macs.
If the WEP password is a hexadecimal password then on the Mac you need to preceed the number with a $ sign or the hex digits, 0x.
These links may be useful:
AirPort- Joining an encrypted WEP or WPA Wi-Fi network
AirPort Express- Difficulty joining 3rd-party network that is using WEP

Connecting to shared internet connection through Mac osx 10.7 wifi

I can't get my new HP touch pad to connect to my wireless network. I connect my iMac through ethernet but have a wifi network setup from my iMac so my other devices can use my iMacs shared internet connection. The touchpad will not connect, it finds the network, I put in the WEP key and it states "unable to connect, try again". I am at the setup stage on the touch pad and can't get any further!!. I have tried everything I can think of including creating a new wireless network, disabling and changing the sharing password and re-enabling. all my other devices still log on fine and can connect to the internet through the iMacs connection. anyone got any ideas?
Post relates to: HP TouchPad (WiFi)

alopix wrote:
I just remembered why I ignored your first post when reading this topic:
Ad-hoc-sharing can't be the problem, because when I use the exact same method without any WEP encryption, so create an open network, it works perfectly - so it has to be an error in the webOS' handling of WEP or similar...
I'm curious that the Mac offers only ASCII (key length of 5 characters) or 128 bit encryption, but not 64bit (which has a key length of 10 hexadecimal characters and works perfectly with my touchpad). <Wiki definition of WEP.>
This sounds like an old problem we used to have when Palm came out with WiFi-enabled devices. Users would create an ASCII text password in their router, and it would generate a 10 character hexadecimal string that was the true password. Entering the 5-digit ASCII code would fail since it was a seed, and not the "real" code.. Entering the 10-digit key worked every time.
By any chance is this what is occurring on the Mac? Do you see a 10 digit code generated anywhere in the setup routine?
Was the link I provided to you of any help?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Shared internet: balance of speed

Similar Messages

Maybe you are looking for