Shared library via Airport Extreme and Bonjour

Hello,
I share my itunes library via a new airport extreme on the Macs in my house. I would like to access the library via the windows machines (via bonjour).
I have an external hard drive attached to the airport extreme. I have full access to this hard drive via the windows machines.
I have my iTunes libary on this hard drive. iTunes on the Mac's access this library with ease.
Thank you,

it might be worth checking in over at the Airport for Windows forum:
Airport for Windows
(The Airtunes/BonJour experts tend to spend more time over there than here, so you might be noticed a bit more easily by the right folks in that forum.)

Similar Messages

HT4628 Intermittent reception when streaming music via Airport Extreme and Airport Express to powered speakers. Is this a problem with the Extreme?

i get intermittent reception when I stream music from I Tunes via Airport Extreme and Airport Express to powered speakers. I Tunes continues to play uninterupted on the Mac. The problem does not lie with the Express as it occurs on both of my 2 Express at the same time. is this a problem with the Extreme?

Well, repying to my own post... Might have found the solution: I tried to do the same with a Macbook Pro 2010 using the very same setup. And it worked perfectly! No freeze, no nothing.
One explanation I see:
my iMac is dating back to May 2007, a Core 2 Duo 2,16Ghz with 2 Go of RAM.
So the computer's characteristics (or the Wifi component or the combination of all of this) might be not robust enough to allow streaming to those 2 devices...
Anyone's got anything to add?

HT3235 Can i back up data of my computer in the shared drive via airport extreme

Can i back up data of my computer in the shared drive via airport extreme

If you delete it from the computer, it may eventually be deleted from the backup.
See "additional information" here: http://support.apple.com/kb/ht1427

No Internet via Airport Extreme and Speedtouch Ethernet DSL modem

I've recently purchased a McBook pro and wanted to create a wireless network. I have a new Airport Extreme Base Station and have successfully set that up, but with no internet connection!
I can get a perfect connection by hardwiring either of my machines to the DSL Modem directly (via Ethernet cable), but when i connect the Airport Extreme to the DSL Modem via ethernet there is no internet.
After a bit of research i'm wondering if there is a "bridge" issue... though i have no idea what that means or how to resolve it. Can anyone help?
Details:
Airport Extreme 802.11n
Speedtouch DSL Modem (Thomson ST510 v6)
G5 Power PC Tower (10.4.11) will connect to the Airport Extreme via ethernet, currently connects to the DSL modem via ethernet.
MacBook Pro (10.6.4) will connect wirelessly. can currently connect to the internet through the DSL modem via ethernet.
Dynamic IP via ISP connection via PPPoa

Hi Steven, I know this question has been answered and is a couple of months old but I think you may be able to help with my set up? I have a Thomson speedtouch 510 v6 modem router provided by Karoo (UK). My other Belkin N modem router has just bust [again] so the Speedtouch is my old faithful backup device. Now, i've never been able to get on ichat with the Belkin as its a mimo n speed and this is apparently not compatible; So i'm now on ethernet with the st510 and have just set up ports for ichat thanks to a thread called http://discussions.apple.com/thread.jspa?messageID=2719419&#2719419.
What I want to know from you (because I really need a wireless router to get me off this ethernet support system and back on airport) is how you're getting on with the st510 / airport extreme combo now and can you use ichat on it? If so does your connection doctor say full cone in network settings or something else? As I say, I really want to use ichat and have never been able to in 3 years of owning my Macbook Pro. Hope to hear back from you Steven. Regards Steph

Sharing Internet via Airport Extreme using a USB wireless modem

I have had to go to NextG access using a USB modem (only option). We previously succesfully had the second iMac sharing the internet connection on an ethernet-connected wireless service. Now, I cannot get the other iMac to share the connection, because there is no option to choose the USB modem.
Another problem is the USB modem is top-dog - it won't connect unless I turned off anything else using anything remotely looking like wireless (even when I have my bluetooth phone connected to another USB hub). I can connect to the NextG network after disconnecting everything else and THEN reconnect, but I just can't get the Internet sharing going. I have also had the iMac freezing, demanding a power-off-power-on (unheard of in my experience!).
Is there any remedy for the Internet sharing at all? Configuring a different channel or something on Airport? Using one of the other config options?
I think there are something like USB-to-Ethernet adaptors (pretty costly here in Australia) and don't want to shell out for one if it doesn't work. Same with a third-party router. I also wondered if I should just forget about using Airport completely and run a few metres of crossover cable?
Any help would be greatly appreciated, thanks.

Hi Steven, I know this question has been answered and is a couple of months old but I think you may be able to help with my set up? I have a Thomson speedtouch 510 v6 modem router provided by Karoo (UK). My other Belkin N modem router has just bust [again] so the Speedtouch is my old faithful backup device. Now, i've never been able to get on ichat with the Belkin as its a mimo n speed and this is apparently not compatible; So i'm now on ethernet with the st510 and have just set up ports for ichat thanks to a thread called http://discussions.apple.com/thread.jspa?messageID=2719419&#2719419.
What I want to know from you (because I really need a wireless router to get me off this ethernet support system and back on airport) is how you're getting on with the st510 / airport extreme combo now and can you use ichat on it? If so does your connection doctor say full cone in network settings or something else? As I say, I really want to use ichat and have never been able to in 3 years of owning my Macbook Pro. Hope to hear back from you Steven. Regards Steph

Custom icon on a disk shared via Airport Extreme

I have a USB hard drive that I am sharing via an airport extreme. In the finder, under "Shared" I see my airport extreme. When I click on that, I see my external drive. I would like to change the icon for that, but the standard Get Info -> paste doesn't seem to work.
I've tried to set a custom icon on a test folder on my hard drive and it works. I also tried it on a test folder on the USB drive shared via airport extreme, and that worked. But I can't set the icon for the drive itself. Any suggestions?

No, they pulled it, even though Steve promised the wireless backup feature in his latest keynote. One hour into it to be exact.
http://events.apple.com.edgesuite.net/d7625zs/event/
Now, I am very much against releasing a product before its ready, so I respect them for that. However Steve VERY clearly states that it was already working and would release with Leopard. He usually makes a very very clear distinction between things they "can/might" do and things that are working. He even goes into detail about how all the house macs can wirelessly use the same backup through the Airport Express. THEY EVEN HAVE A PICTURE of it!
So they need more time, okay. But I feel lied to. The least they could do is make a press release with an ETA! The hush hush, makes it seem like they are going to scrap it and pretend it never happened.

How do you connect Airport Extreme and share HP Photosmart 3210 Printer?

Hello,
I have a Mac and PC Network composed of:
iMac 24'' Leopard 10.5.2 (main computer)
2 PC Fujitsu Pentium 4 on Windows XP
2 PC HP Pentium 4 on Windows XP
my network/connections are done via Airport Extreme and 2 hubs (other devices connected to the network like Wii, XBox etc.)
I am trying to share my HP Photosmart 3210 using the USB connector on Airport Extreme but I am experiencing strange problems while printing from the iMac. I can print an e-mail or a "light" document however if I want to print a Mac powerpoint (Mac office) largest document, the problem starts after the second or 3rd page, the printer goes on pause at the middle of the page and the interface indicates "problem communicating with the printer" or something like that.....unique possibility is to turn the printer off and start again but the problem persists. However, it seems that the printer works ok from the PC's.
I have tried to install the latest versin of the HP driver on my iMac but while configuring, the printer doesn't appear....I have checked on the printer settings and the IP address is 0.0.0.0.
I am now thinking about connecting the Printer via one of the Ethernet port on Airport Extreme.
Questions:
1. Any help on the above ? Any advice ?
2. Is it normal to have no IP address on the printer when connected via USB on Airport Extreme ?
3. Why HP config doesn't recognize the printer on the network ?
4. Why does it work from the PCs and not from the iMac and why does it print light documents and not big ones ? Is this a memory7buffer problem on the printer ? What can I do if this is the case ?
5. On the Airport Extreme Utility, do I need to share the printer via "Bonjour"?
6. I am willing to plug an extrenal HD on the Airport Express USB port. Is it possible to put first a multi USB port on the Airport Extreme USB or is it going to cause problems ?
Thanks a lot for your help.
P.
Message was edited by: vador300
Message was edited by: vador300
Message was edited by: vador300
Message was edited by: vador300

NCBob, Welcome to the discussion area!
If I understand correctly you are replacing the Linksys. It should be a simple replacement. Connect the cable modem to the WAN port on the AirPort Extreme base station (AEBS). Connect your Ethernet devices (including the switch) to the AEBS LAN ports.

Cannot print from IMac or Dell Latitude Laptop on Canon MX330 printer via Airport Extreme.

Trying to connect a Canon MX330 printer to an IMac and Dell Latitude laptop via Airport extreme and having no luck.
All devices recognize the printer, but when I try to print from the IMac it says that the printer is offline, even though it is not. The printer status on the IMac says offline until I clear the printer queue and then the status goes online.
When I try to print from the Dell laptop the printer reacts, but nothing prints.
I have run through all of the troubleshooting in the support section online. Any advice?

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Time Machine and Disk Shared via Airport Extreme

Is it possible to use Time Machine on a disk shared via Airport Extreme?

No, they pulled it, even though Steve promised the wireless backup feature in his latest keynote. One hour into it to be exact.
http://events.apple.com.edgesuite.net/d7625zs/event/
Now, I am very much against releasing a product before its ready, so I respect them for that. However Steve VERY clearly states that it was already working and would release with Leopard. He usually makes a very very clear distinction between things they "can/might" do and things that are working. He even goes into detail about how all the house macs can wirelessly use the same backup through the Airport Express. THEY EVEN HAVE A PICTURE of it!
So they need more time, okay. But I feel lied to. The least they could do is make a press release with an ETA! The hush hush, makes it seem like they are going to scrap it and pretend it never happened.

Can't read iPhoto library from external drive via airport extreme base stat

I can't seem to open my iPhoto library from my external USB drive that is hooked and being shared through my airport extreme base station. If I plug the external drive directly to my mac via USB it works but not when going through the base station.
This only started happening when I upgraded from iLife'06 to iLife'08.
Anyone have any ideas on how to fix?

That's a problem that many are posting about. Haven't read of a solution yet. Be sure to report the problem to Apple at: http://www.apple.com/feedback/iphoto.html.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Sharing an external drive via airport extreme

I have a network system set up using Airport Extreme (the dome shaped one). It is connected to my ADSL DLink box. I also have an Airport Express plugged in downstair to increase my wireless signal strengh. I have one G3 connected to the Airport Extreme via an ethernet cable (because I don't have wireless on that computer). I have a Mac pro beside it, accessing the network via wireless and downstair, I have a powerbook wich accesses the network wirelessly. What I would like to do share my external hard drive with all three computers, so that they can all see my jobs folder, along with iphoto and itunes. I basically want everything to be in sync. Can anyone give me advice on how to best go aout it? I thought I would be able to plug my hard drive into the airport extreme and share it that way, but nothing is showing up on the airport utility. Is my airport too old? Thanks for any help or advice.

Plug the external hard drive into one of your stationary Macs. On that Mac go to System Preferences-> Sharing preference pane and enable File Sharing.
Now you should be able to access that drive from any of your other Macs.

Apple TV, Airport Extreme and Disk Sharing

Can I put all my photos, music, vidoes, etc. on a USB drive connected to my airport extreme and NOT need a Mac on to play music, etc?
In other words, will the Apple TV see the shared USB drive and pull from there?

Whether or not the movies are streamed or stored
locally on the atv, you will still have long menu's.
Not necessarily. iTunes allows you to limit what is stored locally on the Apple TV (for instance by syncing only so many recent or unwatched items, or just specific ones, selected from the category tabs). This is relatively easy to manage with the iTunes GUI, since even for long lists you have tabs, scroll bars, & clickable boxes, giving you much quicker access to list items compared to Apple TV's sequential menus.
Moreover, as the Apple TV drive fills up, it gives preferential treatment to content in a predictable hierarchy, which together with iTunes management of what is synced can keep stored item lists short & fresh. iTunes based management also allows for an effective form of parental control (by allowing only syncing with selected items from a selected iTunes library) & for different locally stored content for different Apple TV's. When you want (or want to allow) full iTunes library access, you can set up an Apple TV for streaming from selected computers.
Regarding USB-connected auxiliary storage in general, it isn't clear how it could be managed -- remember, there is no Finder (& probably not enough RAM to support it) in Apple TV, plus no GUI to support drag & drop or the other file system amenities we are accustomed to in OS X. It may be doable, but probably not in a manner appealing to non-geek type users.

File transfer speed in Shared USB Hard Drive via Airport Extreme

I' am planing to buy one of this, but first I need to know what kind of file transfer speed I can expect when sharing USB drive via Airport Extreme 1000Mbps Ethernet.
Thanks.
Message was edited by: Robert81

most likely 14m/sec but normally 10.5 this is ethernet wired and usb attached. wireless would be about 8M/sec
Wired is good enough I use it for Finder copy frequently.

Finder freezes when attempting to access a "shared" external hard drive (wireless via Airport Extreme)

Finder freezes. As soon as I click onto my "shared" external hard drive (3TB WD - wireless via Airport Extreme), finder immediately freezes / eternally spinning beach ball (until I restart finder). Can still access wirelessly on another Mac (not on Yosemite).
Please help!

Ok - for a while there, the hard drive would not come up on the desktop - but now on a re-boot of the compter, or if I disconnect the hard drive and re-connect it, a message comes up with three buttons which say:
Initialize
Ignore
Eject
Sound like the hard drive has died?

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Shared library via Airport Extreme and Bonjour

Similar Messages

Maybe you are looking for