'Shared' list not updating

I'm having problems with the 'Shared' list in Finder. When at home, I still see the shared places from work, but not my iMac that should come up (which is also the only one listed in the 'All...' list). How can I make Finder update the list properly?
Best wishes,
Johan Kåhrström

Can you provide a little more information? At work, are the other computers running Windows or OS X? Is your laptop running Windows or OS X? Do your home network and network at work have different names?
Generally speaking, Windows networks rebroadcast their share information every 12 minutes. If you woke up your computer from sleep at home, and you are using Windows shares rather than Apple ones, you might not see the shares for several minutes.
You might also want to setup a different "location" in the Network control panel for Home, if you are using Windows file shares and there's a different workgroup name used at work than at home. In that case, you would simply go to network preferences and select which setup to use (work or home).

Similar Messages

Shared variables not updating in exe

Hi,
I've created a project with 2 vi's, they share data via Networked Shared Variables, one vi writes while the other reads.
The data is passed between the 2 vi's whilst running in the Labview 2009 SP1 development environment, but when I create an exe, the screen values in the reader vi do not update at all.
In the build specification I've tried both including the vi's which reference the shared variables and the
option to list the shared variable libaries for deployment at run time, as methods to overcome the problem.
Please, any clues why the exe should fail to allow shared variables to pass data ?
thanks,
Gary.

Hey Gary,
I've just created a project to replicate the issue you are having and indeed when I built the application, the Shared Variables were no longer working. This is because I hadn't deployed the Shared Variables in code; which I think may be the problem that you're having at the moment. When create a Network Published Shared Variable library in LabVIEW, it auto-deploys itself for the development environment; but this is definitely not the case for when you build an executable. Instead, you must deploy the library yourself in code.
In the attached zip folder, please follow the following instructions and hopefully you'll be able to fix your VI:
Unzip the folder and extract the files.
Open up the project.
Look at the project layout. Notice the SharedVariableLibrary.lvlib and inspect the Shared_Double variable.
Look at how the Reader.vi and the Writer.vi interact with the variable.
Go into the Main.vi. See that I make an Open Application Reference VI and Invoke Node to manually deploy the library in code. You'll have to change the path to this library to match the directory structure of your own computer, so just make sure it navigates to the library in the extracted folder.
Check out the Build Specifications. I've done nothing here except ensure I only include the Main VI. Finally build the VI and run the executable.
You should see that this will give you a working Shared Variable setup. The Machine Name input for the Open Application Reference is blank because you only want to communicate with the localhost i.e. Your computer. Therefore by explicitly deploying all libraries you require, your VIs should be able to communicate effectively.
Does this solve your problem?
Alex Thomas, University of Manchester School of EEE LabVIEW Ambassador (CLAD)
Attachments:
GlobalVariableProject Folder LabVIEW 9_0SP1.zip ‏26 KB

Why is my wish list not updating when I add songs through iTunes Radio?

Wish list is not updating.

Count me in the same boat. I'm an iTunes Match customer. While listening to iTunes Radio I push the star and then choose to add to wish list except it never adds. Doing the same function on my Mac works fine.
I found a note from Apple that stated you can only add "albums" to your wish list on iOS 7, not songs. That then begs the question....why add functionality that is purposefully intended to add songs in your own UI????

Global Address List Not Updating in Outlook

I have a question from user about Global Address Not updating in Outlook. We have a user whom name was changed, how ever his new name didn't appeared on Global Address List in Outlook client
I did explained to him that Outlook require about 48 hours to reflect a new update Global Address List then he asked me why previously (24 hours) his old name also disappear from Global Address List.
Could you please advice.

Hi,
Please check whether the new name is updated in Global Address List when the user accesses his mailbox from OWA and Outlook Online mode.
If the new name is also not changed in GAL for OWA, please refer to bawzman's suggestion to run cmdlets to update globel address list in Exchange server.
If the issue only happens in Outlook cached mode, the issue should be related to Offline Address Book which is used for Cached mode as Globle Address List. We can manually download it and update the address list by clicking Send/Receive > Send/Receive
Groups > Download Address Book to have a try.
Regards,
Winnie Liang
TechNet Community Support

Orchestrator - SCSM List not updating

Hi,
When updating or adding a list item in Service Manager it is not showing in Orchestrator.
For instance, I added a new support group that will trigger a task whenever a ticket is assigned to that Support Group. On the Monitor Object task when I select Support Group as a filter, it shows a list without my newly created Support Group.
I have an SCSM connector to Orchestrator, but when I run it I see no change.
Is there something else that I have to try?

Hi,
Yes it's a real problem ... you can try this
In order to force SCO runbookactivity (i.e. Get Object) to re-read a class property:
1. Open an activity
2. If the activity had any filters, make a note of them
2. Under Class field, click on Brows button and select the same class
3. If the activity had any filters, they would be deleted at this point - re-enter the filters.
FYI you can read this :
https://social.technet.microsoft.com/Forums/en-US/ee9b3ca7-415f-4c74-afeb-0f6ec08c2ba2/orchestrator-scsm-2012-activity-does-not-update-custom-class-properties-automatically-how-to?forum=scogeneral
Remy BOVI

Main Listing not updating for Mister Ron's Basement

Hi All,
I don't know if anyone's able to help on this -- it may just be one of those mysterious things that there's nobody to complain to about it.
Still, Mister Ron's Basement, which has been seven days a week faithfully since August, has NOT updated in the ITMS listing since Saturday, December 24. This makes three in a row that haven't shown up yet. Changes I make to the tags don't show up either -- HOWEVER, all the new episodes come through in the subscription section of iTunes.
Maybe ITMS has trouble dealing with numbers beyond 228? Up until now, the listing has displayed the LAST 100, and older ones have scrolled off the bottom. I put up #231 last night, and will put #232 tonight.
BTW, Mister Ron's Basement is composed of my readings of public domain humorous short stories -- it is thoroughly researched, and lots of fun. Whatever ITMS is doing, it doesn't seem to be hurting my download numbers -- I had 5558 downloads on Monday, and 7554 on Tuesday...

iTunes might be just falling behind in their updates.
Why not fill out a complaint at:
http://www.apple.com/support/itunes/musicstore/podcast
You'll probably get a canned response which has nothing to do with your issue, but at least it will open up an email dialogue with someone on the other side to look into the problems you are having.

Sharepoint 2013, MS Project 2013 - Task List not updating when the project file is changed

Hi
I have created a SharePoint task list and timeline from a MS Project 2013 file on my PC. I have then created a new Project file from that task list which then places the new project file in the site asset folder and provides me with a synced copy. I now
only use the SharePoint copy of the project file in my MS Project as any change I make to the project file should be reflected in the Task list and vice-versa
However if I add some tasks into the middle of the project with MS project, the SharePoint Task list is not updated to show these additional tasks. If I open the SharePoint task list with MS Project - from the task list toolbar - the project file shows the
added tasks.....so the MS Project file in the site asset folder is correct but the tasks in the SharePoint task list is not being updated
Anyone seen this before ?
Thanks
Geoff

Hi Esben,
According to your description, the error occurred when opening the task list with the content approval enabled in Project.
Per my knowledge, when we enable the content approval for the task list, the field named Approval Status which is required will be created in the list.
However, if a project plan doesn’t contain a field that is required in SharePoint, the plan won’t sync.
The error occurs because of the required field Approval Status when the content approval is enabled in the task list, so we need to add the required field as a custom field in Project.
More information:
Sync with a SharePoint tasks list:
http://office.microsoft.com/en-in/project-help/sync-with-a-sharepoint-tasks-list-HA102828524.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Shared icalendar not updating on other devices

Hi all, I share my calendar with two others, one using an iPhone the other an iPad both with iOS6. My updated calendar does not update on their devices. I understand that the syncing process occurs when the device is connected to WiFi & being charged? Am I correct & is there any other reason why they are not updating?
Regards,
Roy

I'm having this same problem. Suddenly no shared libraries can be seen. At first I thought it might be a software issue (all computers have been upgraded to iTunes 7.1.1). But now from reading this, I think it must be a router issue. I just replaced our router this week, switching out a Linksys 4-port router for another one almost identical. I did no configuration to the router, just plugged it in, reset it a few times, and it worked. I connect to my ISP via DHCP, so no settings required.
But it must be the new router that's causing the iTunes problem. Does anyone know of a router configuration that might help? Maybe some port forwarding? Does anyone know the port over which itunes would be sharing its library?

Listing not updated

Hello Expert,
We are doing mass listing by WSM3. after executing this , message shows article listed.
when we check it shows.
but if we are adding new site to assortment, again do listing by wsm3, message shows article listed.
but at new site it is not listing.
Regards,
Santosh Jaiswal

Hi Santosh
Once you run the WSM3 even you add new site it will run a background job & list automatically.
you should have an entry in table WLK1 for an article & assortment combination.
If you are getting the article not maintained error then it means that the article is listed but the MARC table is not updated.
for that you have an sap correction note to generate the missing article segments.
If this does not solve your query, Pls let me know exact error.
Regards
Sudha

Communications list not updating

Hi all,
My COMMUNICATIONs list is not updating for the new entry. Whenever i reply to a query and other reply on the same. The same is not getting reflected in my list.

Known issue, strange enough it seems to be a regression
Communications tab - unread
Nicolas.

Satellite S55 DVD Directory List Not Updating

New install of a Toshiba Satellite S55.The drive seems to work ok, but the file listing does not u.pdate when you insert or remove a dvd.If there is a DVD in the drive, Windows Explorer shows the contents. Pull out the DVD, and Windows Explorer still thinks the drive is there. Ditto in the other direcection - inserting a new drive, you need to force Windows Explorer to update. This is particularly a problem when you try to install a multiple disk application - the system does not update that a new disk is in the drive and keeps insisting you need to insert the next disk. Is this a Driver update issue? A DVD drive issue? A Windows issue?Help !!!!! Dave

Hi
I think its a lower upper filter issue and I think you could solve this following this step by step instruction.
First of all remove the ODD (CD/DVD) drive from the list in device manager.
Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Finally you should reboot the unit.
After that windows will recognize the ODD again

Modbus I/O Server Shared Variable Not Updating Immediately After Flush

Hi everyone,
Weird issue here... If I create a Modbus I/O server in a LabVIEW project, bind a shared variable to a holding register, write to the shared variable, flush, and read back, the value returned in an immediate readback is NOT the value I previously wrote. I've attached an example snippet.
In this example, PLC Command Complete is TRUE coming in. I write a FALSE to it. I flush the shared variable buffer. I read back PLC Command Complete. When I do this, PLC Command Complete will return TRUE (???), and after 100ms or so, return FALSE. How is this possible??
Some notes:
The shared variable is NOT network buffered.
The slave is NOT altering the value of this variable; only this snippet of code is.
Altering the refresh rate of the Modbus server does not affect the outcome.
If anyone has any idea as to what's going on, I would greatly appreciate it!

Couple of points.
First, your screenshot shows network shared variables, not single process!
Next, network shared variables take time to update (much longer than NI tell you!) If you knock up a little timing noddy to set a variable and then loop reading that variable until the transition comes through you get results like this (runnng from the programming environment, I've not tried with a compiled exe):
Network shared variable, no flush - approx 20ms (NI say is should be 10)
Network shared variable, flush buffer - very fast (faster than the ms clock resolution) but still took between 14 and 20 iterations of my loop before the change percolated through (certainly not what you would expect)
Single Process variable - instant (even without the flush)
This has caused me so many problems in the past (my own race conditions are bad enough without NI throwing in extra ones with this unexpected behaviour) that I try to avoid network shared variables now.
Change yours to single process and you should be fine (or do they need to be NS?)

Smart List not updating on iPod (Classic)

I've got an iPod Classic with my entire iTunes library syncing to it. I'm running iTunes 11.0.1.12 on Windows 7.
I have a Smart Playlist that I have been using for several years, and until recently, when I sync the playlist to the iPod, it updates while I play music. The Smart Playlist is actually based on another one, but this is basically how it is set up.
"Jamz" is actually another Smart Playlist
So when I play the songs from the "Jams 5 star" playlist, normally once a song has been played, it no longer qualifies for the list, so it gets replaced by a new one. This has been working on my iPod for a long time. However, I recently noticed that it was no longer updating, for me to update the list, I have to now sync the iPod with iTunes.
As I am away from home for work a lot, sometimes for weeks at a time, it is important I get this fixed, but I can't seem to find the problem. I have some other playlists that are working properly on the iPod, this one (and others that are very similar) are not working, and I can't figure out why.
Any help would be appreciated.

I have a smart playlist of podcasts syced to my iPod Touch that has worked with iOS 3 and works with iOS 4, using the settings described here: http://bit.ly/c9GoOF . The key is to check "Live updating". Once the podcast finishes playing it drops off the playlist as expected.
I had the "bright" idea of also including a playlist identical to the first but with "Live updating" not checked (see http://bit.ly/922a2L ). I did this so that I had a playlist containing the already-played podcasts in case I wanted to go back to listen to them again.
The trouble is that this playlist doesn;t sync properly with iTunes. The only fix I found was to sync twice: Sync once, right-click, edit the Smart playlist, make no changes and press OK, and sync a second time.
Has anybody seen this behavior?

Updated reports saved to shared directory not updating for users.

We are using Crystal Reports XI to generate reports based upon our application (EZ-CAP). When we update a report, and save it to our shared report folder on the server, the users "see" only the original report when the open it in Crystal Reports. This behaviour persists even if they reboot their systems. We see this by looking at the timestamp in the Open dialog, which is not the current date/time. The data is not refreshed, either.
However, if the users close Crystal Reports and manually "find" the report by browsing the reports folder, when they next open Crystal Reports, the "new" file is available.
We suspect the reports are being cached inside Crystal Reports, but don't know how or why. We are not using the Repository at this time.
Any insight will be appreciated.

Hi Vickie,
When your user browse for the new file, are they following the same netowkr path as the Open FIles in Crystal? Is it possible the folder the reports are saved to may be mapped to a duplicate folder somewhere else on the network?
That's a dumb response but I've run across that situation before.
The reports are saved with .rpt extensions and no spaces? Since Crystal's Common Dialog is looking for files with that extension.
In the File Open, if you change the Files of Type to All Files, do your users see the new reports?
Good luck,
Brian
Edited by: Brian Dong on Feb 2, 2009 11:57 PM

Recently played list not updating in when connecting my 1st gen iPod Nano

My Recently played list in iTunes will not show any songs recently played songs in my Nano.
Why? How do I fix that?
I've "repaired" iTunes, and updated my iPod to the lastest version.
Any help is appreciated.
Thanks!

Hello lakersfan44,
And welcome to Apple Discussions!
First of all, I am assuming this smart playlist is still available and viewable from within iTunes correct?
Have you made sure your iPod is properly configured to sync playlists?
http://support.apple.com/kb/HT1351
B-rock

'Shared' list not updating

Similar Messages

Maybe you are looking for