Shared Members in Custom can have different aggregation weight?

Hi guys,
I have created a Flow dimension to track the cash flow movements. Under TotalFlows, I have the different movements (OpBalance, CloBalance, Variation, Gain, Loss), all with aggregation weight of 1. But I have to create an additional structure (sibling of TotalFlows), called TotalFlows2, with shared members (OpBalance, CloBalance...) but with aggregation weight of zero.
Can I used the Shared Member with different aggregation weight? Or should I rename them (for ex., TF2_OpBalance)?
Please, advise.
Thanks!
Jai

Absolutely use the shared member and set the aggregation weight to zero in your duplicate structure, this is the key benefit to custom dimensions.

Similar Messages

  • Is there a way to have multiple color Guides so I can have different colors for different layers

    Is there a way to have multiple color Guides in Illustrator and Photoshop CC so I can have different colors for different layers?

    I think it's not possible "natively" to have this functionalty but I found these topics for Photoshop :
    http://www.ps-scripts.com/bb/viewtopic.php?f=10&t=4618
    http://www.ps-scripts.com/bb/viewtopic.php?f=10&t=4617
    On this one, you will see a workflow which are well described.
    http://graphicdesign.stackexchange.com/questions/6030/how-to-set-different-color-to-guides ai-ps-id-fw
    I've not tested them but you should give it a try!

  • How to setup 9ias so that we can have different profile to cater for 2 DADs

    Dear Sir,
    How to setup 9ias so that we can have different profile to cater for 2 DADs with the same name pointing to different database.
    For example:
    /pls/users --> pointing to database 1
    /pls/users --> pointing to database 2
    I would like to know, how possible is it.
    Reason being we would like to deploy both our live and demo plsql application on same application server without the need to change all the dad path to:
    /pls/users -- pointing to database 1
    /pls/usersdb2 -- pointing to database 2
    In other words, we would like to preserve the same DAD name in both live and demo application to minimise unnecessary changes to application.
    Please advise.
    Thanks.

    Follow the directions here:
    http://support.apple.com/kb/ht2534

  • Single VLAN can have different subnets????????

    single VLAN can have different subnet

    Hi Devang,
    Yes your single vlan can have different subnet but they will not talk to each other on ip (layer 3) till the time you configure routing on your layer 3 device using secondary ip address on same logical interface.
    But your answer is yes single vlan can have different subnet.
    HTH
    Ankur

  • Some Buttons in a Custom Page have different shape

    Hi,
    I have a weird issue with the submit button shape.
    In our test1 instance, these buttons are displayed uniformly i.e. the usual submitButton shape sort of oval-like.
    But when i migrated it to test2 instance, some buttons are shaped as they should be but some buttons are rectangular in shape. This is the very first time I saw such rectangular buttons.
    Has anybody experienced that?

    Pekochan
    Just tell your DBA to check X-Display server is ON on your instance or not.
    Try clearing cache from functional administrator responsibility or even bouncing the server.
    Thanks
    AJ

  • Different aggregation for different Dimensions

    Hello,
    is it possible to have different aggregations on different dimensions.
    I have following situation:
    I have a measure per client and day.
    I'm interested in the maximum per month from the daily sums over clients.
    In the measure properties I can only choose between Maximum and Sum in general but not per Dimensions.
    To clearify what i mean here is some sample data.
    * * Client A * Client B *
    * 2014-11-28 * 7 * 8 * SUM() = 15
    * 2014-11-29 * 6 * 8 * SUM() = 14
    * 2014-11-30 * 6 * 10 * SUM() = 16 <-- monthly max
    * 2014-12-01 * 7 * 8 * SUM() = 15
    * 2014-12-02 * 5 * 12 * SUM() = 17 <-- monthly max
    * 2014-12-03 * 6 * 9 * SUM() = 15
    This data is stored in my fact table with reference to date and client dimensions.
    This example data would have to be reported as:
    /* Report on measure
    * * Measure *
    * 2014-11 * 16 *
    * 2014-12 * 16 *
    * Report on measure per client
    (max per client and month)
    * * Client A * Client B *
    * 2014-11 * 7 * 8 *
    * 2014-12 * 7 * 12 *
    Can this be achieved with SSAS? Didn't find any property for that on the measure.
    Best Regards,
    Thomas

    Hi Thomas,
    According to your description, you want to calculate different aggregation for different dimensions, right?
    Based on your scenario, I tested it on AdventureWorks cube, the query below is for you reference.
    with member [Customer].[Country].[USA & Canada] as
    Aggregate( { [Customer].[Country].&[United States],
    [Customer].[Country].&[Canada]
    member [Measures].[MaxAmount]
    as
    max([Date].[Calendar].currentmember.children,[Measures].[Internet Sales Amount])
    select {[Customer].[Country].&[United States],[Customer].[Country].&[Canada],[Customer].[Country].[USA & Canada]} on 0,
    [Date].[Calendar].[Month].members on 1
    from
    [Adventure Works]
    where [Measures].[MaxAmount]
    Here is similar thread with yours, please see:
    https://social.technet.microsoft.com/Forums/en-US/1bd493ef-f957-4fd5-916b-ee60639106c3/calculated-member-different-aggregations-on-different-dimensions?forum=sqlanalysisservices
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • How to retrict the number of object that a class can have...

    hi
    i m just writing a banking program and each customer can only have
    2 accounts,,,so i need to restrict the number of account object that a customer
    can have,,
    so i need to count object? or something like that so that when a customer
    try to create more account, i need to stop them. but
    i don't know how to do that....
    customer can only have two accounts, and,,,,how do i know
    if customer already have two accounts...........................

    i m just writing a banking program and each customer
    can only havePlease make the extra effort to write out words such as "am". The extra keystrokes won't cost much in the way of time, and the enhanced clarity will be appreciated by those communicating on a forum with international readership.
    >
    so i need to count object? Yes. The customer can possess a reference to each account. If the customer has two accounts, the customer can register no more.
    i don't know how to do that....
    The Java� Tutorial - A practical guide for programmers
    customer can only have two accounts, and,,,,how do i
    knowBy counting the number of accounts a customer has!
    P.S. What's with the repeated punctuation?

  • Poss. to have different invoicing partys on 1 vendor for diff purch. orgs?

    Hello!
    We are running SRM 5.00.
    I am a rather techy person and was given the task to link the invoicing vendor to a purchasing vendor on purchasing org level.
    Everything I have found so far (table BUT050 and FM BAPI_BUPR_RELATIONSHIP_CREATE/CHANGE/GET/..) there is no way to link invoicing party on purchasing vendor on purch org. level, without mod's, because it is not part of standard functionality.
    Could this be correct? Does all vendors in SRM have the same invoicing party regardless of purchasing org?
    Thansk
    nam
    Message was edited by: Nam Fritz

    Hi Nam,
    As per SRM 5.0 standard funtionality, you can have different invoicing party. You need to follow below steps-
    1. logon to admin and click on 'manage business partners' and maintain here possible invoicing parties for that vendor.
    2. You extend this vendor data to 'purchasing group'
    In this way you can define same invoicing party for all vendors.
    Thanks
    Vikram

  • Can TWO different Zen Micros be installed on the same computer w/o confli

    I have a Zen Micro 5G, and would like to buy a Zen Micro Photo 8G as well. Does anyone know if there will be conflicts to install the software (firmware?) on the SAME computer? I had conflicts when I tried to install two different Palm Pilots on the same computer - the software of the first Palm no longer worked properly. Perhaps the new one "overrides" the first? I don't know if this might happen with the Zen Micro and Micro Photo.
    Also, does anyone know if the Micro Photo fits into the Zen Micro Traveldock?
    Thanks so much for any insight you can offer!

    SilentC wrote:
    I have a Zen Micro 5G, and would like to buy a Zen Micro Photo 8G as well. Does anyone know if there will be conflicts to install the software (firmware?) on the SAME computer? I had conflicts when I tried to install two different Palm Pilots on the same computer - the software of the first Palm no longer worked properly. Perhaps the new one "overrides" the first? I don't know if this might happen with the Zen Micro and Micro Photo.
    Also, does anyone know if the Micro Photo fits into the Zen Micro Traveldock?
    Thanks so much for any insight you can offer!
    I don't think they will conflict because if you use mediasource, you can have different music libraries etc...
    I believe the microphoto fits the traveldock, but don't hold me to it

  • Different aggregation operators for the measures in a compressed cube

    I am using OWB 10gR2 to create a cube and its dimensions (deployed into a 10gR2 database). Since the cube has 11 dimensions I set all dimensions to sparse and the cube to compressed. The cube has 4 measures, two of them have SUM as aggregation operator for the TIME dimensions the other two should have AVERAGE (or FIRST). I have SUM for all other dimensions.
    After loading data into the cube for the first time I realized that the aggregation for the TIME dimension was not always (although sometimes) correct. It was really strange because either the aggregated values were correct (for SUM and for AVERAGE) or seemed to be "near" the correct result (like average of 145.279 and 145.281 is 145.282 instead of 145.280 or 122+44+16=180 instead of 182). For all other dimensions the aggregation was OK.
    Now I have the following questions:
    1. Is it possible to have different aggregations for different measures in the same COMPRESSED cube?
    2. Is it possible to have the AVERAGE or FIRST aggregation operator for measures in a COMPRESSED cube?
    For a 10gR1 database the answer would be NO, but for a 10gR2 database I do not know. I could not find the answer, neither in the Oracle documentation nor somewhere else.

    What I found in Oracle presentation is that in 10GR2 compressed cube enhancements support all aggregation methods except weighted methods (first, last, minimum, maximum and so on). It is from September 2005 so maybe something changed since then.
    Regarding your question about the results I think it is caused by the fact that calculation are made on doubles and then there is a compression, so maybe precsion is lost a little bit :(. I really am curious whether it is because of numeric (precision loss) issues.

  • Loading shared members from interface tables

    Hi,
    I am loading data to Hyp. Planning via interface tables. I need to load shared members. Where can i tell him that this is a shared member?
    thank you very much
    lubos

    Will not it cause probles when loading shared members first before the original ones?
    I thought that DataStorage only accpet values like StoreData, NeverShare etc.
    I will try it out.
    Thank you very much for your help
    lubos

  • How to load shared members into a duplicate outline using load rules

    Hello, I am trying to load an alternate hierarchy into the same dimension in an outline that accepts duplicate members using EAS load rules ... there is no property for shared members so i can't specify it in the load rule .. i tried using parent child and it is not working - no shared members are loaded in the alternate hierarchy .. any ideas? would another utility make it happen?
    thx

    You might find this useful: http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_dbag/dotdimb.htm
    Especially the Building Shared Members by Using a Rules File section: http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_dbag/dotdimb.htm#dotdimb1061244
    Cheers,
    Mehmet

  • Can i use home sharing if me and my wife have different apple ID accounts?

    can i use home sharing if me and my wife have different apple ID accounts?

    Yes.
    You need to sign into home sharing using ONE Apple ID. So either pick yours or hers, use the same one for home sharing on the computers. Once they are signed in on both Macs you can access media that the other user purchased.
    Click the 'Shared House' for her library (if you have the sidebar enabled) when you are in your iTunes to access her media & vice versa, both iTunes needs to be running & awake.

  • I have "chatted" with customer service 5 different times. I was sent here. I have activated Photoshop Elements 9 on two different iMacs. They are both dead and I am unable to get it to activate on my newest computer. iMac. Can anybody help me?

    I have "chatted" with customer service 5 different times. I was sent here. I have activated Photoshop Elements 9 on two different iMacs. They are both dead and I am unable to get it to activate on my newest computer. iMac. Can anybody help me?

    Unfortunately, only adobe can help you with that, as most people here are just posters such as your self and don't work for adobe.
    If you go here and use the Chat now button (bottom of page), they should get you up and running by resetting your activations.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • Can I Share music from iPhone to wife's iPod we both have different Apple ids, and if I do share music will all my photos be shared too?

    Can I Share music from iPhone to wife's iPod we both have different Apple ids, and if I do share music will all my photos be shared too?

    Depends on what the source of the music is (iTunes purchases, ripped CDs, etc.), and whether you are syncing to iTunes on a computer. As for simply sharing music directly from the iPhone to the iPod, no, you cannot.

Maybe you are looking for