Shared Memory for Custom Table

We have three separate business environments we will call A, B, and C. Is it possible to create shared memory of a custom table in A environment so that it can be read by ABAP logic in environment B, and environment C?
We are considering the usual ALE connection, or, an RFC call. The reseach I've read on shared memory seems like it is most efficient and should work..... But, I do not see where a custom table is shared between environments.
    Thank-You

"Shared Memory" as I know it is shared only within one application server. With "environment" I assume you mean different SAP instances like development system, test system etc., so shared memory cannot replace the techniques that you mentioned, in my opinion.
Thomas

Similar Messages

  • Hello, I have two questions on time capsule  I can only have it on my external hd files and free up my internal memory to my mac  I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

    Hello, I have two questions on time capsule  I can only have it on my external hd files and free up my internal memory to my mac  I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

    I have a mackbook pro and an iMac if I buy a time capsule 2tb airport, I can use it with time machine and what would be the best way to use it.
    There is no particular setup required for TM.. both computers will create their own backup sparsebundle which is like a virtual disk.. Pondini explains the whole thing if you read the reference I gave you.
    and how to use time capsule airport whit other external hd to use my old lacie airport with the new time capsule
    Up to you.. you can plug the external drive into the TC and enjoy really slow file transfers or you can plug it into your computer and use it as external drive.. which is faster than the TC.. and TM can include it in the backup.
    Again everything is explained in the reference.. you are not reading it.

  • How to populate date & time when user enter data for custom table in sm30

    Can anyone tell me How to populate system date & time when user enter data for custom table in sm30..
      Req is
      i have custom table and using sm30 user can enter data.
    after saving date i want to update date & time in table
    Pls let me know where to write the code?
    Thanks in Advance

    You have to write the code in EVENT 01 in SE54 transaction. Go to SE54, enter your Ztable name and in the menu 'Environment-->Events'. Press 'ENTER' to go past the popup message. In the next screen, click on 'New Entries'. In the first column, enter 01 and in the next column give some name for your routine(say UPDATE_USER_DATE_TIME). Then click on the souce code icon that appears in blue at the end of the row. In the code, you need logic like below.
    FORM update_user_date_time.
      DATA: f_index LIKE sy-tabix.
      DATA: BEGIN OF l_total.
              INCLUDE STRUCTURE zztable.
      INCLUDE  STRUCTURE vimtbflags.
      DATA  END OF l_total.
      DATA: s_record TYPE zztable.
      LOOP AT total INTO l_total.
        IF l_total-vim_action = aendern OR
           l_total-vim_action = neuer_eintrag.
          MOVE-CORRESPONDING l_total TO s_record.
          s_record-zz_user = sy-uname.
          s_record-zz_date = sy-datum.
          s_record-zz_time = sy-uzeit.
          READ TABLE extract WITH KEY l_total.
          IF sy-subrc EQ 0.
            f_index = sy-tabix.
          ELSE.
            CLEAR f_index.
          ENDIF.
          MOVE-CORRESPONDING s_record TO l_total.
          MODIFY total FROM l_total.
          CHECK f_index GT 0.
          MODIFY extract INDEX f_index FROM l_total.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    " UPDATE_USER_DATE_TIME
    Here ZZTABLE is the Z table and ZZ_USER, ZZ_DATE, and ZZ_TIME are the fields that are updated.

  • Add Table maintenance program for custom table to an existing func group

    Hi Guys,
    Can I add Table maintenance program for custom table to an existing function group or I need to create a new
    function group for each custom table.
    Thanks,
    mini

    You can add to an existing function group, there's nothing technically to stop you doing this.  However, consider that this is creating generated function modules in this function group and you would be wise to avoid using a function group containing manually created modules.
    I personally always create a new function group, using the name of the table as the name of the function group.
    Regards,
    Nick

  • Creating TPR for customized table

    Hi,
    I want to create transport a customized table to QA from Dev box.
    I know how to create transport request for reports and smartforms and all.
    But How do I create transport request for customized table ?
    Is it thorugh SM30 ?
    Please help me...

    this depends on the Table maintenance dialog for the table. (utiliteis->table maint generator).
    If it has the recording routine set as 'standard' then SM30 will automatically create a transport when you hit the save button after perfroming maint on the table.
    For 'no, or user..' you will have to manually add entries to a transport.
    Go to SE10. Display your transport. Double click on the development/correction line. Now you can see a list of objects belonging to the task. Hit the 'display/change' toggle button. Add an entry with program id R3TR and object TABU. Enter the table name in the object name. Double click opn the function icon to the right of the object name. Double click in the empty table key area. This pops to allow you to enter the keys you require to transport.

  • Transport Request for Custom Table??

    Hi all,
    I got the requriment for Custom Table.
    "The table should have attributes such as the table contents can be transported from DEV to QA to PROD. Also the table can be maintained individually in QA or PROD too"
    I have understood that I need to have "Delivery Class" as "C". But i want to know what should Transport request type: (Workbanch or Customizing)
    thanks in advnace.

    You say  <i>"the table can be maintained individually in QA or PROD too" I have understood that I need to have "Delivery Class" as "C".</i>
    If table must be maintained in QA and PRD, you need "Delivery Class" as "A". With "Delivery Class" as "C" you can only maintain table in DEV and transport entrie changes to the other systems.
    Regards.

  • Is table maintenance generator only for custom table?

    hi ,
    i have doubt is table maintenance generator only for custom table?

    hi swamya,
    Table Maintanance Generator is used to create/change/delete table entries in a particular table.
    In the production system, end-users will not be having access to transaction codes like SE11 and SE16. Developers will not be having access to many transaction codes including the above two.To view the contents of the database table, we will use SE16n in Production system. All these authorizations will be maintained by BASIS team, by creating access profiles.So in order to edit or create the contents of a database table, we should go for table maintenance generator. In real time, authorizations will be maintained in production system.
    The second reason is, we can edit or create multiple entries at a time, using tablemaintenance generator.
    Apart from that we have options like 'Enter conditions' in table maintenance screen SM30.
    hope this helps in clearing ur doubt.
    Regards
    Saurabh

  • Maintenance View for custom table with foreign key relationship

    Hi Folks,
         I have created a custom table with foreign key relationship with other check tables. I want to create a maintenance view / tablemaintenance generator. What all things I need to take care for the foreign keys related fields while creating the maintenance view / tablemaintenance generator.
    Regards,
      santosh

    Hi,
    You do not have to do anything explicitely for the foreign key relationships in the table maintainance generator.
    Create the table maintainance generator via SE11 and it will take care of all teh foreign key checks by itself.
    Regards,
    Ankur Parab

  • BADI/User Exit for custom table update from Delivery

    Hi
    Our requirement is to update a custom table with the delivery number and other related details when the picking status is changed to "C". Kindly suggest BADI/User exit for this requirement .
    Thanks in Advance for your immediate help .

    Hi Joseph,
    See SAP Note 415716 - User exits in delivery processing. It says when you have the document number available, what is permitted, what not, ....
    I hope this helps you
    Regards
    Eduardo

  • Transaction code for custom table

    Hi there,
    I created one custom table. I created Tbale Maintenance Generator for this. I have to create transaction code for this table so that user can directly open this custom table in SM30. Can anybody suggest on this. is there any other way to do this so that user can directly open this custom table in SM30 mode?
    Regards,
    Zakir.

    Hi
    Check this link for creating a transaction code for a TM
    http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
    Please go throught below link ..... it was given with screen shots of the T.code Creating for the table after the maintaince view had been created ......
    http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
    Regards
    Anji

  • F4 help for custom table field - to be used when populating data thru SM30

    Hi,
    I have a custom table with 5 fields - say A, B, C, D and E. While populating data to the table through SM30, I need to create a F4 help for the field C. A  custom function module needs to be used.
    I have created a module for the same in the event PROCESS ON VALUE-REQUEST of the function group of the table.
    But the F4 for field C depends on the values put in fields A and B.
    I am not able to get the values of fields A and B from within the module PROCESS ON VALUE-REQUEST.
    Please help me to create the F4 help.

    hii,
    This is the piece of code i have used in one of my SM30 to get f4. mopdify according to ur need and use.
    revert back for further help.
    w_dynpread-fieldname = 'ZSITEDCDATA-SITE'.
      APPEND w_dynpread TO i_dynpread.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname               = 'SAPLZSITEDCDATA'
          dynumb               = sy-dynnr
          translate_to_upper   = 'X'
        TABLES
          dynpfields           = i_dynpread
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          invalid_parameter    = 7
          undefind_error       = 8
          double_conversion    = 9
          stepl_not_found      = 10
          OTHERS               = 11.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE i_dynpread INTO w_dynpread INDEX 1.
      IF sy-subrc IS INITIAL.
        SELECT land1 FROM t001w
          INTO TABLE i_site
          WHERE werks EQ w_dynpread-fieldvalue.
        IF i_site[] IS NOT INITIAL.
          DATA: lv_line TYPE i.
          CLEAR lv_line.
          DESCRIBE TABLE i_site LINES lv_line.
          IF lv_line GT 1.
            CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
              EXPORTING
                retfield        = 'ZSITEDCDATA-SITE_COUNTRY'
                dynpprog        = 'SAPLZSITEDCDATA'
                dynpnr          = sy-dynnr
                window_title    = 'Site Country'
                value_org       = 'S'
              TABLES
                value_tab       = i_site[]
                return_tab      = i_return
              EXCEPTIONS
                parameter_error = 1
                no_values_found = 2
                OTHERS          = 3.
            IF sy-subrc <> 0.
              MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
            ELSE.
              READ TABLE i_return INTO w_return INDEX 1.
              IF sy-subrc IS INITIAL.
                zsitedcdata-site_country = w_return-fieldval.
              ENDIF.
            ENDIF.
    Thanks ,
    Gaurav

  • Error in multiple operation with change document object for custom table

    hi all,
    I have developed a change document object for a custom table ZTEST and developed a report program for insertion, updation & deletion..everything works fine if I do only once ie. if I created only 1 entries. If I created 2 new entries , I am getting an Error "DUPREC:POS&Z3RL_TAB&Z3RL_TAB" and EXIT the transaction.
    why I am getting this error??? is it not possible to do multiple operation with the change document???
    kindly help.
    Edited by: JaiKarthik on Apr 7, 2010 6:20 AM

       LOOP AT ts_mod INTO wa_mod.
                READ TABLE <i_itab> INTO <wa_tab> INDEX wa_mod-row.
    * Select the existing entries in table Z3RL for change history
                    SELECT SINGLE * FROM z3rl
                           INTO wa_z3rl
                           WHERE vkorg   = <wa_tab>+3(4)
                           AND   zzkunnr = <wa_tab>+7(10).
    * Move the old entries
                    IF sy-subrc = 0.
                      CLEAR ls_z3rl.
                      ls_z3rl = wa_z3rl.
                    ENDIF.
    * Update the table
                 MODIFY (viewname) FROM <wa_tab>.
                   CLEAR wa_z3rl.
                    wa_z3rl-mandt      = <wa_tab>+0(3).
                    wa_z3rl-vkorg      = <wa_tab>+3(4).
                    wa_z3rl-zzkunnr    = <wa_tab>+7(10).
    * Populate change tables
                    CLEAR wa_change.
                    wa_change-teilobjid = 'Z3RL'.
                    wa_change-textart = 'TEST_2'.
                    wa_change-textspr = 'EN'.
                    wa_change-updkz = 'U'.
                    APPEND wa_change TO ts_change.
    *call the fM to log the values in CDHDR table.
                    CALL FUNCTION 'Z3RL_WRITE_DOCUMENT'
                      EXPORTING
                        objectid                 = 'Z3RL'
                        tcode                    = sy-tcode
                        utime                    = sy-uzeit
                        udate                    = sy-datum
                        username                 = sy-uname
                        planned_change_number    = ' '
                        object_change_indicator  = 'U'
                        planned_or_real_changes  = 'U'
                        no_change_pointers       = 'U'
                        upd_icdtxt_z3rl= 'U'
                        n_z3rl= wa_z3rl
                        o_z3rl        = ls_z3rl
                        upd_z3rl= 'U'
                        lv_opt                   = ' '
                      TABLES
                        icdtxt_z3rl= ts_change.
                CLEAR : wa_mod, <wa_tab>.
              ENDLOOP.
    Edited by: JaiKarthik on Apr 7, 2010 6:49 AM

  • How big a deal is the shared memory for video editing

    Hi,
    It looks like the portable Mac I have been waiting for has been released. The one thing that I am wondering about is the shared video? memory. How big a deal is it?
    It looks like it should not be an issue with iMovie. How about FCE?
    With the Macbook at $1,300 and the entry level MBP at $2,000, $700 is a lot to me- budget and otherwise- Especially since I will add a gig of ram, and the 3 year apple protection plan.

    Hi There,
    I use iMovie most of the time for around an hour project and went back and forth with iSlick FX, iTunes, garage band and iDVD, and I find my MAcBook serve me well (2.0 Ghz, 2 GB), and use external LCD for wider view editing area.
    The chipset is actually allowed to use up to 224 mb of shared memory (with based 80 mb on os X) and the bigger matched memory you install, the more flexibility for that graphic chipset to allocate shared memory.
    The only time my project getting choppy is when I select show waveform for entire clip in my project area. That is when the chipset is lack power to play it real time.
    But if you are serious about getting editing and planning to upgrade to Final cut (express or pro) later, MacBook Pro is a better investment and bigger screen too.
    Good Luck

  • Source of data for custom tables in Oracle Apps

    Hi,
    Is there any way to find the source of data for the Custom tables. The source can be either any function, procedure, package or a trigger or any other process. The reason why I need to know about it is because we have some custom tables that are used by some custom Reports. Sometimes those reports comes out blank because the data in these custom tables is blank. So I need to know which processes are populating data in these custom tables. Any help would be really appreciated !!
    Thanks,
    KM

    Is there any way to find the source of data for the Custom tables. The source can be either any function, procedure, package or a trigger or any other process. The reason why I need to know about it is because we have some custom tables that are used by some custom Reports. Sometimes those reports comes out blank because the data in these custom tables is blank. So I need to know which processes are populating data in these custom tables. Any help would be really appreciated !!I do not think there is a direct way to find out the source of the data unless your custom processes are documented.
    You may enable AutditTrail (search the forum for links/docs) and see if this would help.
    Thanks,
    Hussein

  • For custom tables should we use UTC for date/time fields

    A general question.
    Can anyone confirm that SAP does seem to be moving towards storing date/time in UTC format?
    We're building custom tables and we're making it a standard to store date/time fields in UTC format.
    Regards,
    Lavaughn

    Hello Lavaughn,
    I can not speak for SAP, but from my personal experience TimeStamps are the state of the art to store time date info in db tables. Even with date/Time fields a conversion to the local timezone is necessary. Of course you can reuse your db definition on dynpros. But since UI and business logic will be divided anyway this is also not really a valid point.
    Best Regards
    Klaus

Maybe you are looking for

  • Udev/hal rules won't automount my ipod

    After following directions in the wiki articles on hal and udev to get my ipod to automount and generate the /dev/ipod device, I'm at a loss because nothing seems to work as explained. (I'm running Arch64 with LXDE) I've added the following rule to /

  • Decrypting an XML file

    This is my first time trying to encrycpt and decrypt anything, but have seem some tutorials for C# .NET online.. I'm wondering if there is any way to read encrypted data from .NET by Flash and decrypt it.... Basically what I have is a .NET desktop ap

  • OBIEE 11G Create Domain Faild

    os:linux 64 obiee:bi_windows_x86_111130_64_disk when create domain faild, pls help me!! Creating a new AdminServer Object ... AdminServer port is 7001 Starting the domain ... oracle.as.provisioning.util.ConfigException: Error while starting the domai

  • Qualifying product serial number for upgrade is not accepted

    Hi, I am currently re-installing Adobe Creative Suite 5 on my new computer. The serial number was accepted, however the qualifying product (Creative Suite 2) is not accepted:

  • Email text

    How do I change the default text in emails from "here are the photos I wish to share with you" to something more appropriate for me?  I can certainly alter the text once the email is created but I would like to change the default.