Shared printer from a pc does not show up on my printer list.

I have a macbook air and the shared printer from a pc does not show up on my printer list. I know it's available on the network as I have a another pc that has access to it. The Mac did find it at one time but it has since disappeared. Appreciate help.
Rich

Can you see the CD ripped songs in iTunes itself? Can you then right-click and select "Show in Windows Explorer"?

Similar Messages

Reply/forward to a message from iPhone, Outlook does not show status

If you reply to a message from iPhone, Outlook does not show status (if replied or forwarded the message). The iPhone indicates the reply/forward icon however in Outlook I would have no idea if I responded to that message.

You're right. Had not noticed it before. Hopefully Apple will fix this in one of their future releases.

I have purchased a new laptop and my purchases made from new laptop does not show on my account here ... how do I fix it?

I have purchased a new laptop and my purchases made from new laptop does not show on my account here ... how do I fix it? My old laptop is on windows 7 and my new onw is windows 8

Copy everything from your old computer to your new one

Apple TV won't connect to iTunes and does not show up in my devices list in iTunes.

My older model Apple TV won't connect to iTunes and does not show up in my devices list in iTunes. I have two Apple TVs in my house and I can't imagine that this is part of the problem but I mention it just in case. My other Apple TV is brand new and it connects to iTunes just fine. I've tried most of the "fixes" and one says to Force Sync but I can't since Apple TV isn't in my device list. Another "Fix" said to Navigate the Apple TV to Settings --> Downloads --> Check for Downloads, but when I tried that there was no option for "Downloads" under the Settings Heading. I'm at a loss. Please help. Could this be an issue with too many authorized devices? We have three iPads, two iPhones, laptop, desktop, two Apple TVs, and an iPod and most of them are syncing the same music playlists and whatnot... have I run out of rope?

hi, just posting to everyone in general..its not you, or your apple tv, it is itunes.
ok, ive had the exact same issues for weeks now, as with everyone i had done the lastest upgrade and no longer could see/sync my gen 1 appleTV.........so, i removed the upgrade and went back to the prev version, even though it was showing in my prefs under appleTV, it still wouldnt show in the side panel under devices....i gave up.
This week i was determined to get it to work! So i started from scratch, totally removed itunes and started back with version 9 and upgrade each version from there, i had no luck, ic clicked find appleTvs but it wouldnt....however i just d/l version 9.2.0.61 and BINGO!. No sooner has it opened and up popped the side panel devices list, showing my appleTV..all ready to be synced etc. I immediately panicked of course haha..and set it all up and its working perfectly.
...Only catch now is that this older version will not be compatiable with my iphone, which i do keep music on...seems we cant win. grrrrrrrrrrrrrrrr this will be the same for all the latest apple products.
Apple needs to allow more than one version of itunes per pc OR perhaps they could get their act together and include all of the millions of APPLETV GEN1 owners in there latest upgrading..after all, THEY made the product and THEY do sell the movies/tv shows, perhaps they could stop making all the upgrade all about the music only!......on which i might add why not incluse movies/tv shows in icloud! yet another upgrade that should be included in the APPLETV GERNERATION 1!..yes we do still exist!
at the very least, im happy ive managed to get all my movies etc onto the apple tv, where ill keep them and from now on d/l directly onto my apple tv. I usually d/l to my laptop and then send them to the appletv but while trying to get all this sorted i did a test, i d/l a movie using my appletv hoping it would somehow let itunes "find" it and getting it to show up in my device list, but it didnt work, however it did sync/send the movie to itunes.. so at least i could save a back up copy.
good luck trying, as i said this has been weeks and this is the only solution ive found so far....and going through these forums its obviouse its itunes thats the issue, NOT Our apple tvs.

Firefox does not show filesystem or FTP file list

When I type "/" or "file:///" in the address bar it does not show anything. It should list my the folders in my root drive but it shows nothing. Strangely this is the same for any FTP file server I go to. It shows nothing but claims to be loaded. I think something in Firefox is missing.

I cleared the cookies and that might have done it. Comment if you have or had this problem.

I have an old ipod shuffle and I cannot get it to sync because it does not show up in my devices list...? HELP!!!

I cannot get my old ipod shuffle to sync because it does not show up in my devices list!!! I have tried letting it die and then plugging it in and still no success!! HELP!!!

To sync via wifi you first have to connect to computer via USB and check the box in the Summary pane for the iPod in iTunes that sync via wifi.
Note you can only sync with one computer. If you change syncing computers you have to restore the iPod on the second computer.

HT4557 I rented a movie on iTunes from my pc, does not show up on my macbook air. Home sharing is on, both computers are authorized. Can't figure it out

movie i rented on itunes, downloaded on my pc does not show up on my mac book air. home sharing is turned on, and both computers are authorized. Help!

Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro. If I want to read on my mac I have to use Kindle or Nook. Which means any book I've already purchased through iBooks has to be read on my iPad. Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

When I open an image in Photoshop from Lightroom it does not show any adjustments, without restarting photoshop between each picture.

I am using Macbook Pro, Photoshop CC, and Lightroom 5.
The problem is: When I start edit in photoshop from Lightroom, the adjustment in Lightroom does not showing up in Photoshop. This has never been happen before while using Photoshop 6.
I have tried to reinstall the products several times, including OS Yosemite. But it does not help.

The problem with write permissions for the OneDrive folder only shows up in Lightroom 6's export dialogue, that's why it's to irritating. Lightroom 5.7.1 is not having that problem nor does the file explorer. The problem also exists on both of my machines. I will try to check for other problems with the OneDrive troubleshooter though: Running the OneDrive troubleshooter - Windows Help

Imap mail sent from my iphone does not show up in the sent folder on my desktop

imap mail sent from my iphone or ipad does not show up in the sent folder on my desktop

Hi Bob,
I'm using Mac Mail 4.5
I have set up my mail preferences to include a "From"
Web mail includes the appropriate "from" header information.
Interestingly, when I send emails from this account on other machines it's ok.
(ipad2,iPhone 3s,powermac)
It just seems to be the MacBook Pro that is presenting this error.
As an aside, my ISP host recently upgraded from Pop to Imap.
Simon

W520: Unable to boot from USB - device does not show up in boot menu

I have a W520, and I am trying to boot from a USB key. The USB key is bootable, my old T61p boots just fine from it, and so does another computer I tried.
The W520, after pressing F12 on power on, immediately shows the Intel PXE agent and then some blue boot menu, which only shows hard drive and LAN as available boot options.
I have tried all three USB ports but the results are always the same - the USB device does not show up. Is there any trick or BIOS setting to enable boot from USB?
Thanks,
CS

Hello Neil
Thanks for getting back to me
The issue was that the usb drives were disabled in the bios from the Startup menu.
To enable
1. Enter bios
2. Select boot
3. If you do not see the boot device you require use the down cursor key until the "Excluded from boot priority order" becomes visible.
4. Select the device you require (in my case USB HDD)
5. Save and exit.
You can now boot from a usb stick and install the Linux distro of your choice :-)
Cheers

Enterprise subordinate CA does not show up in certificate authorities list

After much discussion I decided the best approach was to clean eveything up and start over. I went through the KB on decommissioning an enterprise CA and Subordinate CA, install a new standalone root, and a new enterprise subordinate CA. Everything appeared
to be working with one exception. The new Enterprise Subordinate does not show up in the Certificate Authorities section of Public key services in AD Sites&Services. It does show up in AIA, CDP and Enrollment services. The standalone root is trusted and
I set up group policy with the certificate of the Enterprise Subordinate as a trusted intermediate. The templates were configured also as well as autoenrollment for computers but so far only the DCs and my workstation has received certificates. I am sure I
am missing something but after 100s of pages and artcle after article I don't see it. I ran the certutil -viewstore query and it doesn't see it either and it doesn't tell me how to fix it. Also, what is the deal with case; it seems no matter how careful I
was with upper and lower case letter AD did what it wanted and my published CA name looks like I can't figure out hows caps lock works.
Thanks in advance
[email protected]

yes, it is possible. However, you will need to make some modifications on root CA:
certutil -setreg ca\dsconfig "AD Configuration naming context"
certutil -setreg ca\dsconfigdn "AD Configuration naming context"
certutil -setreg ca\dsdomaindn "AD Forest root domain DN"
AD configuration naming context is (usually) CN=Configuration, DC=rootdomainname, DC=domainsuffix.
To extend Root CA CRL validity, in the Certification Authority MMC, select properties of Revoked Certificates folder and specify validity period (something about 6-12 months). Make sure that Delta CRLs are NOT enabled. Save settings and restart certificate
services.
Then you should republish all CRLs and publish CRL to Active Directory:
certutil -dspublish -f path\RootCAcrl.crl
My weblog: http://en-us.sysadmins.lv
PowerShell PKI Module: http://pspki.codeplex.com
Windows PKI reference:
on TechNet wiki

Metadata from LR 6 does not show up in Picasa or other apps

I just upgraded to Lightroom 6. Previously, any photo I exported as jpg would display standard metadata in other applications. I use Picasa a lot as a viewer, and all the images I have exported from Lightroom 6 since upgrading show nothing in the usual fields (shutter speed, aperture, etc). This carries over to posting images to Flickr and the like - all camera and exposure info is missing.
In the export dialog I have "all metadata" checked. Any help is much appreciated.
Windows 7 64.

Let's confirm whether this is the EXIF metadata format issue described here: Lightroom CC: JPEG format tripping up other programs. The more problems we can document and the more people vote on that topic, the more likely Adobe will address the issue.
In the Publish Services panel on the left, right-click the PicasaWeb service and do Edit Settings. Go to the Export Location Override section and change Folder For Temporary Copies Needed For Export to a specific folder. Now copies of the actual published files will be saved in that folder. Next, select two pics, one whose metadata displays correctly in Google+ and one whose metadata doesn't. Upload those two pics to Dropbox or similar and post the link here (or send me a private message). I'll then examine the internal metadata layout of both.

Application does not show up in "install applications list"

I am having an odd problem with my SCCM 2012 OSD tasks. It appears that not all applications are showing up in the "install applications" task. For instance, I have separate applications for 32-bit and 64-bit Java. The 64-bit application shows
up in the list of applications you can choose to install, but the 32-bit version doesn't. I have tried both with and both without the "allow this application to be installed from the install application task sequence action without being deployed"
box selected. (It also looks like that box does nothing, I have it unchecked for Acrobat Pro and it still shows up in the list).
Both deployments are working outside of the OSD stuff, but I'd like to be able to have them install as part of an OS deployment. Any ideas?

Had the same, (i am on 2012 R2 by the way)
packages could be selected, Applications couldn't from a TS.
Create an application with only one deployment type of type " msi" and you'll see that this one will show up!
Everything said here (set the flag, install weather or not...) is true
my issue was: If theapplication is of type "script" it will not show in the application list. unless ALL of your deployment types (user and/or device types) in your application, have these things set!
(i sctually needed "install for system if resource is device, otherwise install for user" )
AND in my application i have to unset the "Allow this application to be installed ..." flag for them to show up in the TS
AND run the scripts as 32bit on 64bit computers
AGAIN: only seeing this behaviour in SCRIPT application types, not MSI typed once...
I see no mention of this anywhere in any documenttaion out there.....
hope to have helped out someone...
joeltje

IPhone4 will not sync and does not show up in a device list.

My son's phone was originally listed under my Apple ID.
He has since created a new one and says he removed it.
He is now trying to go under mine again but Itunes does not recognize his phone is plugged in.
I tried checking his other id and it doesn't show any devices registered.
I read on here that it should show any device and when it was registered so you couldn't do the switch within 90 days.
I also checked mine and it doesn't show registered on there either.
I just want to sync it with my apple ID.
We have tried all the troubleshooting steps on here with the phone as well as uninstalling and reinstalling itunes on the Mac.... and NOTHING.
Any suggestions????
Thank you!

Click the appropriate link below to troubleshoot your problem.
iOS: Device not recognized in iTunes for Mac OS X
iOS: Device not recognized in iTunes for Windows
Note: If you feel this is a warranty issue, Cerified Refurbished Products form Apple have the same one year warranty as a new device.

Oracle.DataAccess does not show up in VS 2008 list of data providers

Hi
I have an application which uses VB .Net 3.5 on Win 7 64bit machine with Oracle11gR2 64bit client in the machine.
The problem I am facing is that Oracle.DataAccess does not come up under the Data provider drop downs in VS 2008.
I have checked that the dll is actually present in C:\oracle\11gR2client64bit\odp.net\bin\2.x and I can also see the installed entry for the Dll in C:\Windows\assembly with the correct version.
Am I missing something?
Any help would be appreciated, I have been stuck on this for 8 days now.

Use ODP and ASp.Net provider during oracle client install. Compile as x86 for solution

Shared printer from a pc does not show up on my printer list.

Similar Messages

Maybe you are looking for