Shared Public folders keep on asking for credentials

Hello
My problem is less complex than it might look like, it's just difficult to explain correctly. Now:
I have multiple computers on my home LAN, with various user accounts, without a HomeGroup. They all share some files, have a "Private" network, Public Folder Sharing enabled and "password protected sharing" disabled.
So their configuration is identical.
These computers are 2 Windows 7 PLK computers, one Windows 8.1 ENU, one Windows 8.1 PLK and finally one 8.1 branded by Lenovo. I'll call them 7, 8EN, 8PL and 8B to avoid lenghty phrases. And now the part that makes no sense at all:
Here's my problem: Win7 computers can easily access Win8 shares. It works both ways: all Win8 computers can access the Win7 shares. But... 8EN cannot access the 8B shares without asking for credentials (?!). Those are the same files that are being accessed
with no problem by any Win7 or even WinXP machines. I can't share anything in 8 without making other 8's ask for credentials(but 7 works). Moreover - I can provide a random string as a username and no password and I'll get the access to the Public folders.
So the access is there, but I have to provide any credentials to reach it. Without it, the first try is rejected. It's clearly wrong.
HomeGroup helps. But I don't want a HomeGroup, I switch places often, HG annoys me and finally - I don't want to sound rude but "a proper way is to use a HomeGroup" is not an answer to "why did the sharing between my 8's stopped working while
nobody else seem to have such problems with their 8's, and 7's work fine".
What on earth could possibly make it happen? I reinstalled my Windows 8 and they still cannot communicate with other 8's? Is it the language? but the PLK is just a language pack, the insides are still ENU.
Thank you for any help and have a nice day!

Hi,
Please make sure they are all in same network.
Then check if everyone computer you also turn on below two settings marked as red:
Don't remember to click Save changes button.
Karen Hu
TechNet Community Support

Similar Messages

Hi All, I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain" I run a test print and its se

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Outlook 2010 + Exchange 2010 keeps asking for credentials - Please Help!

Hello All,
Recently after a Windows Update + restart of my Exchange Server I'm having an issue with Outlook 2010 where it continually asks for credentials. Every 5 minutes or so the credentials popup appears and either typing your password or clicking cancel will make
Outlook work as expected again until the next popup, frequency of popups is about 2-5 minutes give or take. I am using Exchange 2010 on Server 2008 R2 and aside from the popup everything is working as expected. This seems to be effecting almost all users.
Some things I've tried already include:
- Removing any saved credentials on computer
- Removing and recreating Outlook Mail Profiles
- Running "Set-AutodiscoverVirtualDirectory -Identity 'autodiscover (default Web site)' -WindowsAuthentication $true -BasicAuthentication $false" in shell to disable basic authentication for autodiscover
- Running "get-outlookanyhwere | set-outlookanywhere -ClientAuthenticationMethod NTLM -IISAuthenticationMethods NTLM" in shell to ensure that outlook anywhere and IIS are using NTLM authentication
- Ensuring that the OAB folder permissions are set to allow Authenticated Users to Read/Execute
Anyways, if anybody has additional suggestions for me I'd very much appreciate them. Many users are using the Web App for the time being (with no issues) since the credentials popup is too annoying for them.

So I made sure that all of my authentication methods match the settings you linked me and then recycled the app pool you mentioned but am still having the issue.
One thing I noticed is that if a user experiencing the problem types their password into the credentials popup it will keep popping up continuously but if they hit cancel it says "Needs Password" where it would normally say "Connected to Microsoft Exchange"
and if they simply click once where it says "Needs Password" then all of a sudden it switches to "Connected to Microsoft Exchange" again and they no longer see the popup until Outlook is restarted.
Just to verify I have the proper settings now this is what shell returns:
[PS] C:\Windows\system32>Get-WebServicesVirtualDirectory | fl *auth*
CertificateAuthentication     :
InternalAuthenticationMethods : {Ntlm, WindowsIntegrated, WSSecurity}
ExternalAuthenticationMethods : {Ntlm, WindowsIntegrated, WSSecurity}
LiveIdSpNegoAuthentication    : False
WSSecurityAuthentication      : True
LiveIdBasicAuthentication     : False
BasicAuthentication           : False
DigestAuthentication          : False
WindowsAuthentication         : True
[PS] C:\Windows\system32>Get-AutodiscoverVirtualDirectory | fl *auth*
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
LiveIdSpNegoAuthentication    : False
WSSecurityAuthentication      : True
LiveIdBasicAuthentication     : False
BasicAuthentication           : True
DigestAuthentication          : False
WindowsAuthentication         : True
Do you have any additional suggestions that I can try? From what I can tell my authentication methods all match the default settings now.
Edit: As soon as I changed EWA to just Basic Authentication as it says in the linked default settings I would get an error when trying to browse to the EWA that said "Outlook failed to initialize" and re-adding the Windows Authentication, then running iisreset
fixed the issue. Therefore EWA is the only service with non-default authentication methods now.

SBS2008 in combination with Outlook 2013 keeps asking for credentials

I've got a SBS 2008 server with windows 7 pro clients.
Some of them use outlook 2010 and some use 2013.
The users which use the 2013 version has a problem with saving of the credentials.
Every time they start outlook 2013 they will be asked for credentials and some of them 5 times before it starts.
The weird thing is: if you click ESC to close the screen that asks for the credentials, outlook still connects to the mailbox.
Is there someone who can tell me how to fix this problem.

Hi Willy-Billy,
Any update? Would you please let me know the current situation of this issue?
In addition, would you please let me confirm something more?
Please check if problematic user accounts access mailbox correctly via OWA.
If you create a new outlook profile for a problematic account, will encounter the same issue?
As mentioned in the link that Robert provided, please check if you enable
Always prompt for logon credentials setting in Outlook 2013.
If you enable this setting, please uncheck and monitor the result.
Meanwhile, please remove the old credential in
Credential Manager, then add again. Please check if this issue still persists.
Please run
SBS 2008 BPA to collect SBS configuration information and analysis. Then check if you can find some clues.
Windows SBS Best Practices Analyzer (BPA)
http://support.microsoft.com/kb/2673284
Hope this helps.
Best regards,
Justin Gu

Outlook 2010 keeps asking for credentials

Hello,
We have a Exchange 2013 server with outlook 2010 clients wich constanly ask for credentials.
even with the option save credentials on.
The Exchange servers are hosted and the clients are not part of a domain and use Outlook Anywhere.
Outlook 2013 clients do not have this problem.
I tried several things:
-new profile
-rename ProtectSystemProider folder
- dword registry Savecredentials
- removed ProtectSystemProvider registry key
- Removed or edited credential manager accounts
We have this problem on serveral Windows 7 clients and Remote Desktop Server 2008 r2 sessions.
Hope anyone can help me.
gr
Cris

Hi Cris,
Please try to clean up the cached credential in your computer. Then fill in with the format of UPN when it prompted for credentials next time and check the Remember my credential to save it. About how to remove cached credentials, please follow these steps:
1. Launch the Credential Manager from Control Panel > All Control Panel Items > Credential Manager.
2. In the Generic Credentials section you’ll see a setting for [MS Outlook] which will include your SSO details. Click the downward-pointing arrow to the right of that value.
3. In the expand details, click Remove from vault. Then Outlook will no longer have a stored copy of your password.
Regards,
Winnie Liang
TechNet Community Support

Outlook asks for credentials 2 times

Hello,
I'm in the middle of a transition from SBS 2011 to 2012 R2. Currently Exchange 2010 and 2013 co-exists. Every time I start Outlook (2013) it asks for credentials. If I use [email protected] format it does not accept. If I use domain\user format, I
have to enter it 2 or 3 times, then Outlook works fine.
OWA, AS, mail flow seems to be working.
What can cause the password prompt?
TIA

Try out the following fixes:
Try to recreate the outlook profiles. Also, Check "Credential Manager" in Control Panel to see if there are any old entries for Outlook.
Refer: http://myitforum.com/myitforumwp/2013/02/05/solution-outlook-200720102013365-prompts-me-for-credentials-each-time-i-open/
Change the authentication to NTLM instead of Basic Authentication and see if this makes a difference.
Uncheck the Exchange proxy settings
Uncheck the "Download shared folders"
File -> account settings ->account settings -> Edit.. (account) -> More settings... (button on the bottom) -> Advanced (tab) -> Un-tick "Download shared folders"

Outlook 2013 asks for credentials but does not connect for Exchange email, but only when out of office

Hi,
New employee wishes to use his Office 365. Have loaded onto new PC, connected to exchange, loaded his folders, everything is fine.
When he leaves the office and connects at home, he is asked for credentials.
I have tried the usual credentials: [email protected] and domain\user
With each attempt, Outlook displays disconnected
The password is correct, OWA he can log on fine, he has no problem when returning to the office. He has all the correct permissions in AD.
No other user has a problem when away from the office, but every other user is using Office 2010
Advice appreciated.

Hi,
Please make sure the user has enable Outlook Anywhere in Outlook.
To turn on Outlook Anywhere, on the Connection tab, under
Outlook Anywhere, check Connect to Microsoft Exchange using HTTP, and then click
Exchange Proxy Settings. Your Exchange admin must enable this feature and provide you the proxy settings. For more information, please refer:
http://office.microsoft.com/en-in/outlook-help/use-outlook-anywhere-to-connect-to-your-exchange-server-without-a-vpn-HP010355551.aspx
Best Regards,
Steve Fan
TechNet Community Support

I just bought a new Ipad mini a while ago, a created a new apple ID "***************" , I can't download anything on apps store, it keeps on asking for a credit card but I don't have one. Can I create an account without a credit card?

I just bought a new Ipad mini a while ago, and created a new apple ID *********** , I can't download anything on apps store, it keeps on asking for a credit card but I don't have one. Can I create an account without a credit card?
<Edited by Host>

Read this:
iTunes Store: Accepted forms of payment
It is the same for the app store. You are required to have some sort of payment method in the record.
Barry

HT1420 Keep being asked for my audible account id, but i do not know it. It is not the same as my Apple ID as I have tried this

Keep being asked for my audible account id, but i do not know it. It is not the same as my Apple ID as I have tried this

If you've forgetten the details for an Audible.com account, see:
http://audible.custhelp.com/app/answers/detail/a_id/3270
Regards.

I have never had to enter a password to access mail. However, recently, I keep being asked for password on my ****** address. Only on my macbook. (which, btw, has a version number the drop down doesn't offer as a choice. I had to putt 9.4)

I have never had to enter a password to access mail.
However, recently, I keep being asked for password on my ***** address.
Only on my macbook. (which, btw, has a version number your drop down doesn't offer as a choice. I had to putt 9.4)
When I look up the account the "password" is a long string of gobbledygook. Something I would never do.
But when I attempt to use that pw I still can't get in.
I have no trouble accessing that email account on my mac mini. Just on the macbook.
<Edited by Host>

Maiko,
I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
Destination illinois.edu.1945806043
Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
Destination uic.edu.1139051993
is for my entire site ... it's my site handle. Whereas this:
Destination uic.edu.1991288441
is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things.

Not being asked for credentials in SSRS 2008 R2 for Firefox and Safari

I have an instance of SSRS 2008 that is currently working on all browsers (the URL is something like reports.foo/reports).
I spun up a new instance of SSRS and placed it on the url report01.foo/reports. This new instance is connected to a different domain (I am spining up a Active Directory Domain and trying to build out our infrastructure, so the logins are different).
I am able to access the new URL (report01.foo/reports) from IE and Chrome. It is asking for the username/password and able to get on just fine.
However, when I try to go to the new URL (report01.foo/reports) using Safari and Firefox, it never asks for credentials and shows a blank page. This does not happen for the old URL (reports.foo/reports), only the new URL.
Any ideas?

Hi Ben,
Per my understanding that you have configured windows authentication and which by default will not prompt for credential. So I assumed you have changed the User Authentication setting in the security setting to pop up for credential, for example like below(IE),
If so, your issue about the pop up credetial not pop up in Firefox and Safari can be caused by the related security setting, If you give Anonymous User rights, you may got the blank page:
Details information about similar issue in threads below for your reference:
how to change reporting service site seurity setting?
SSRS in firefox not asking for credentials
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

When I try to open the Iphoto it keeps on asking for the software update but when I click on the software update tab, it says that all updates are up to date. I still cant open the Iphoto, what should I do?

When I try to open the iphoto it keeps on asking for the software update, but when I click on the software update it says that all the software in the computer are up to date. I still cant open the iphoto, what should I do?

How old is your Mac? If it's very recent you need to update via the App Store
If you purchased at the App Store you need to update via the App Store
Otherwise you update via Softare Update
If you have moved iPhoto from the default location (i.e. into a Folder) then the updater won't find it. Move it back.
If you have renamed iPhoto, the updater won't find it. Change it back.
Regards
TD

Lync 2010 client asks for credentials when outside of corporate network.

Hello,
We are running Lync 2010 Enterprise. Everytime our Lync users are outside of our network and they log in to their Lync client, they get a pop-up window asking for credentials. When they log into Lync inside our network the Lync client connects automatically
without asking for credentials. Is this normal behavior? I assumed that the Lync client would behave exactly no matter where they were connecting from. They are using Lync 2010 client on domain joined laptops, I would assume the Lync client would just use
the same credentials they used to log in to their computers and not ask for anything. Please let me know if there is a way to stop the pop-up from showing up when people try to connect to Lync from outside our network.
Thanks for any help!

Outside of the network the credential popup is for Exchange web services on the back end to check calendar info, contact lookup, etc. If Lync is already logged in when they see the popup, this is normal behavior.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Why does every 3 mths my ipod keeps on asking for a restore when i did nothing to it

why does every 3 mths my ipod keeps on asking for a restore when i did nothing to it?

Either a bad memory/storage location that manifests its infrequently or a intermittent hardware problem like a loose connection.

When trying to get new messages, keep getting asked for password and then get "operation couldn't be completed. (MFMessager error domain error 1032)-Why?

When trying to get new messages, keep getting asked for password and then get "operation couldn't be completed. (MFMessager error domain error 1032)-Why?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Shared Public folders keep on asking for credentials

Similar Messages

Maybe you are looking for