Shared Services 11.1.1.3 - Problem importing Bus Rules from LCM Exports

Hi,
We have some Bus Rules in Calc Mgr that are named the same as the corresponding webform. For instance, a bus rule may be named '2.1.4 - Budget Load'. When we export all bus rules and then try and import them in to target (can be same server), they say they were successful, however none show up in Calc Mgr. After exhaustive testing, we took out the period (.) in the name and made it '2_1_4 - Budget Load' and it worked fine and migrates ok. My question is if anyone knows if this is a know issue bug or are periods not allowed like parens in Bus Rules names? It's weird as I swear this was working on a earlier version of Shared Services. We are upgraded to the latest patch on Shared Services too.
Anyone have an older version of 11.1.1.3 Shared Services that they can test this on for me? Thinking Oracle may not have regression tested :)

Straight from Oracle Support.... What a joke their regression testing is.....
Thank you for your updates.
I found the following Bug for 11.1.1.3. It is as follows :
"Bug 8489999 - Filenames without ext, with artifact ids containing "." are not migrated. "
According to the Development Team, it is validated with Drop 5 build 17.
When discussing this issue with the Development Team earlier today, they wanted to check if this behaviour is noticed even when using 'admin' and Application Owner Account.

Similar Messages

Shared Services 11.1.2 Unable to remove assigned user from a security group

In Shared Services 11.1.2 - trying to remove a user from the assigned users list of a security group. Initially, I am able to remove the user and the assigned users total decreases by one - but when I relaunch the group properties - this user is still in there? The change does not hold. Any suggestions would be appreciated - thanks,
Paul

Hello Paul,
Not sure if this is related to yours, but it might be worth having a look at the following articles on Oracle support --
External users in EPM Shared Services (e.g. MSAD users) cannot be removed from Native groups if they have multiple IDs in the external user directory. [ID 1526569.1]
Users from External User Directories Cannot be Removed from Native Groups [ID 1272309.1]
Thanks,
hyperionEPM
Please mark answers as correct or helpful for others to find them easily.

Problem importing into FCPX from SD card

Hi, I'm having a problem importing some videos from a micro SD card into FCPX. It is some helmet camera footage shot at 720P @ 30fps. It's a .mov file.
My problem is when I go to the "import media" window, I can see the files on the import screen. I can also skim and play the files before they are imported. The first time I tried to import them, I got an error message (which I unfortunately didn't write down). After I clicked "OK" on the error message, I could still see the file thumbnail, but if I hovered my mouse over it, the thumbnail turned black. I then restarted FCPX, and tried again. I found that I could still see, skim, and play the file, but when I choose to "import selected" the little pie shaped downloading icon doesn't appear anymore and the file doesn't attempt to import.
Should I go to Disk Utility and do a "Verfiy Disk" and "Repair Disk" (if necessary) or might I permanantly delete the corrupted file if I "fix" it by repairing the disk?
I have a screenshot of the import screen if needed, but the resolution is terrible. I'll need to take another one if it would be beneficial to see it.
Thanks in advance for any help!
Glen

A screen shot would be good..
If you have mulltple files and you know which one is a problem, select just the others and import them.
Try copying the entire card to your HD and seeing whether it will import from your computer.
Russ

IMPORT a VIEW from an export dump file

I'm trying to import a view from an export dump file. In using the Import Utility, do I use the TABLE parameter and give the View name ie: TABLES=view1
null

Only I want to do is import ONE view from an export dmp file that contains hundereds of table, many views and procedures. I do not want to reimport everything from the export file.

Problems importing videos recorded from my iPhone 3GS to iPhoto

I am having problems importing any videos recorded from my iPhone 3GS onto iPhoto. iPhoto keep giving me the following error:
"Error downloading Image. iPhoto cannot import your photos because there was a problem downloading an image."
If anyone else is having the same problem, please advise on how to fix.
Thanks,

I am having the same problem...
and Image Capture ( didn't know we would normally be able to use it, but you can) also give an error
"Import Error"
Now I have used "ITimelapse pro" to transfer some timelapse movies (about 3 that are about 30 to 60 seconds long) that I made to the phone's photo library.. and I has a very long video that I mistakenly made - (15 minutes long or so) and I "trimmed" it to be a few minutes long. -- and used "JotNot" to send a photo to the photo library... otherwise I have only some regular photos (about 40 ) and about 2 regular videos in the library.
so any suggestions... ( I am emailing all that I can to myself ... maybe ridding everything will help)

Problems importing AVCHD clips from Panasonic GF1

I'm having problems importing clips from my new Panasonic Gf1. FCE (4.0.1) sees the device ok, and selecting and previewing the clips in the log and transfer window works fine, but once the clips are in FCE (converted to AIC) they play fast in the viewer or when placed in the sequence. Strange, because they play fine in the preview window before importing. Tried this in iMovie 08 and get the same effect.
I'm can convert them Toast to AIC and they work fine when imported to FCE but this is not my preferred workflow.

I tried using Toast Titanium 10 for conversion as suggested but there was a slight issue with synch of video and audio. So I downloaded and bought Voltaic HD as suggested elsewhere and the AVCHD files of the Panasonic GF-1 are now playing in Final Cut Express 4 without issues - I am editing with no problem. Given that I can use the Log&Transfer Window (Final Cut 4) for my Olympus EP1 and my Panasonic HD video cam, it's odd that the files of the Panasonic GF-1 don't work in Final Cut (yet), but at least I am back editing. Voltaic HD was $35, a doable expense.... it does work flawless (so far).

Shared Services 11.1.2 + Provisioned Roles for Business Rules not reflectin

Hi,
I have provisioned users to have 'Basic' role in shared services for Business rules. We are using Calc manager + classic planning app. However users are unable to see the business rules associated with the forms due to which the rules dont run on save. Is there a intermediary step which I am overlooking?
Regards,
N

Please ignore this question. I guess i posted in the wrong place. Not sure how to remove the thread

Problems importing 3D layers from Photoshop

Hi, I am a public school teacher in Australia and we have a site licence for the Adobe Master Collection CS4 at school. I am having some problems importing 3D layers into After Effects from Photoshop.
Firstly, I have a computer in my office with exactly the same software, installed from the same source as the computers in my class room. They are all running Google SketchUp 8, Photoshop Extended CS4 and After Effects CS4.
In my office I am able to export a 3D model from SketchUp using the KMZ format and open it using Photoshop. I can then save the file as a PSD file. I can't attach the file here as it is just over 2mb. When I import it into After Effects using the Photoshop Live 3D option I can rotate the model as normal and the elements appear as shown below.
When I try the exact same exercise in my class room (where the computers are all running exactly the same versions of Photoshop Extended CS4 and After Effects CS4) the model is imported as a 2D image with no ability to rotate or interact with the model. It appears that the camera and controller layers are missing from the timeline as well as the Solids folder from the Project pane as shown below.
I have been trying to figure out the difference for most of the day today and so far I cannot find any reason for this to occur, neither can I find anyone with a similar problem who has solved it.
Any help would be greatly appreciated,
Mr Merrick

PS Live 3D requires hardware acceleration to work properly, that is in terms of OpenGL support being available in Photoshop on the machines in question. If that's not the case, the importer component won't function either as it uses the same routines.
Mylenium

Problem importing RAW images from my Nikon D80

Hi.
I'm having some problems importing images from my Nikon D80 when I've been taking photos in RAW format. IPhoto recognises the camera as usual, and allows me to name and describe the roll. However, it then seems to freeze and won't import the photos.
IF I stop the import, then open the camera as a disk, I can physically grab the .NEF files from their folder and drop them into iPhoto where the import will carry on as expected.
Any ideas?

See my reply to your other post.
Regards
TD

Problems importing raw files from nikon d610

My lightroom 4.4 will not import raw files from my new nikon d610. I downloaded the converted but cannot get that to work either.
Please help

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The above link provides the full list of camera models supported by Adobe Camera Raw and Lightroom. You will note that support for the Nikon D610 was introduced in Lightroom 5.3.
You have a couple of options
a. Upgrade your version of Lightroom to version 5, the latest update is LR 5.4. This will provide support for your raw NEF files from your camera. (LR 4 will not have any further updates)
b. Download the free Adobe DNG Converter version 8.4 and convert the NEF files to DNG format and you can then import the DNG files into Lightroom 4. (retain copies of your NEF files for use with the Nikon software or other software that may not read DNG files.)
Quote " I downloaded the converted but cannot get that to work either.
Please help" If you are referring to the Adobe DNG Converter if is possible that if you used an older version of Nikon Software to transfer the files from your camera to the computer the files may have been rendered unreadable by Adobe Software.

Problem importing raw files from camera

Hello I am new to digital photography and am having trouble importing raw files from my panasonic lumix g1 into elements 7. I can import them into the software that came with the camera, but I would rather use photoshop. Can anybody advise me on this?
Many thanks
JP

You need to install ACR 5.4 into your PSE 7. Note: ACR 5.5 the latest ACR is still in beta form and will not yet install in PSE 7.
Follow this link for ACR 5.4:-
http://kb2.adobe.com/cps/407/kb407344.html
Read the instructions carefully!!

How to import Mail rules from Lion to Mavericks?

I tried importing my several dozen rules from OS X 10.7.5 to Mavericks 10.9.4. I tried the method described by SECollins7 here:
Import Lion Mail rules into Mavericks Mail?
It did not work. Nor does manually copying the text from «MessageRules.plist» to «SyncedRules.plist». They just do not appear in the rules settings in Mail in Mavericks.
Is there a way to import rules anyway?
Thanks for any hints!

This issue is caused by a combination of two things:
The file used in previous versions of OS X to store local (not iCloud-based) Mail rules is not used in Mavericks.
The migration process doesn't transfer the rules from the old file to the new one, which has a different format.
You may be able to recover the Mail rules by taking the steps below.
Warning: Do not use this procedure if you synchronize Mail rules with other devices via iCloud.
Quit Mail if it's running.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
cd Library/Mail/V2/MailData; /usr/libexec/PlistBuddy -x -c 'Print :rules' MessageRules.plist > SyncedRules.plist
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear. You can then quit Terminal. Test.

Importing only tables from full export

hi,
our database is going to get live..
Oracle 10GR2
Windows 2003.
i have full expdp dump file...
i just want to import only tables from that dumpfile..
how can i do that..
there are around 1059 tables...
searched over the net but did not find anythiing..
your help is needed....
thank you ..
wating for your

thnks for the replay..
the schema is different in which the tables needs to be imported.
but this schema in which tables needs to b imported contains the same number of tables with same strutures.
thanks.

Importing single row from an exported dump of many tables

Hi all,
I have a requirement to import a single row from a exported dump which has collection of tables in it.
i have used export of a single row and import of single row(from single row export dump), now i need to import a single row from a dump containing collection of tables...
kindly help me out with this.

971424 wrote:
Hi all,
I have a requirement to import a single row from a exported dump which has collection of tables in it.
i have used export of a single row and import of single row(from single row export dump), now i need to import a single row from a dump containing collection of tables...
kindly help me out with this.post command line that produced the dump file.
How do I ask a question on the forums?
SQL and PL/SQL FAQ

0CRM_OPPT_H Infosource extraction problem (no transfer rules from Content)

Hi there,
I'm having a problem with 0CRM_OPPT_H infosource on BW 7.0 and Content version 703 SP9.
After activating the object from content there is no transfer rules for header infosource, item infosource is ok and I'm getting data. I've tried to created a DTP from scratch but I'm not geting data from source system. I've tested getting data from source system with RSA3 extraction test and it's working fine.
I've been checking on sdn and tested changing authorizations but it doesnt work.
Any ideas ??? It's normal I'm not getting transfer rules from content? Why I can not assing Datasource 0CRM_OPPT_H to inforsource 0CRM_OPPT_H??
Thanks in advance,
Regards,
Carlos

I believe I had the same problem as you did. When you're installing the Business Content in BI you have to make sure BI knows which source systems you're installing BC from.
Go to RSA1 -> BI Content
In the Edit drop down menu choose "Source System Assignment"
Make sure your CRM and BI system are checked in the window that pops up. Try collecting for the 0CRM_OPPT_H again and see if the objects you're missing show up this time. If that doesn't work search through the specific object types for items you're missing. For example, search transfer rules for "0CRM_OPPT*" or just "0CRM_OPPT" (i'm not sure if the wildcard is valid in this instance) and see if what you're looking for shows up in the list.
Hope this helps.

Shared Services 11.1.1.3 - Problem importing Bus Rules from LCM Exports

Similar Messages

Maybe you are looking for