Shared Services(11.x) installation problem

hi
on our dev environment we have uninstalled all the hyperion(9.2.x) components and have tried to install the hss of the new version(11x).But we are unable to install as its default taking the previous HSS schema(which has already been deleted).
So please let me know the locations(Registry also) where we can delete those entries(Prior hss(9.2.x)) such that we can install the newer version without any issues.
thanks in advance
cheers
krishnatilak

Hi,
Remove anything under HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions in the registry.
Check for a file called vpd.properties which will usually be in C:\windows < rename this file to something else, this is usually what stops people installing Version 11 if they had a previous release on the machine.
There may be some environment variables you want to remove though this can usually be left e.g. HYPERION_HOME, ARBORPATH
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Configuration of EPM 11.1.2 Shared Services issue during installation

Hi,
I am running into issue with configuration of Shared Services after installing EPM 11.1.2 on my machine. I am running the installation on Windows 8 and 64 Bit. All of the components that I wanted installed successfully. After that I went into the Configuration for Shared Services, I ran into the issue with the status of Deploy Application to Server not completed successfully (configuring...). I was hoping to configure one thing at a time as suggested in the blogs.... then I'd configure Essbase and not Financial Reporting...in that sequence. Thus, I also do not see any of the services installed under Foundation Services; Shared Services URL, Start EPM nor Start FoundationServices (Oracle Weblogic 10) tmplink.
I've tried to search online but found nothing specific on the issue. Am I missing something? Please help.
Thanks

Windows 8 has not been officially released yet so don't expect EPM products to support it.
Cheers
John
http://john-goodwin.blogspot.com/

Internet Sharing service may cause iChat problems

Here are some good news: After months of frustration I finally found the cause for my iChat audio/video connection problems.
The symptoms were as follows:
When my MacBook Pro was connected to the wireless router (Time Capsule) via AirPort, I wasn't able to establish an audio or video connection. When I tried for example to connect to one of Apple's test accounts appleu3test01, appleu3test02 or appleu3test03, I always ended up with the famous Errors 7 or 8.
However, if I connected my computer to the Time Capsule via Ethernet (LAN) cable directly, the iChat connection worked.
So, why didn't it work via AirPort?
It turned out that the reason for my problem was the activated Internet Sharing service (System Preferences > Sharing > Internet Sharing). As soon as I deactivated Internet Sharing, iChat audio/video connections via AirPort worked like a charm.
Interestingly, after switching Internet Sharing back on it still worked until I set my computer to sleep mode. After waking up again with Internet Sharing still activated it no longer worked.
I have now permanently deactivated Internet Sharing and everything is fine.
Hope this helps others to solve their iChat connection problem.

If iChat can't do all or part of what it is supposed to do with Internet Sharing on, WHY DOESN'T EITHER THE OS OR ICHAT SAY SO? I would be nice if the problem were fixed (although it looks like the problem has been open for years), but in the meantime, it would be nice for the uninitiated to be given a clue regarding the non-obvious.
"There was a communication error during your Chat. Did not receive a response from ..."
There sure was!

SQL Server 2008 Service Pack 1 installation problem

I am using Windows 7.
Today I saw "Microsoft SQL Server 2008 Service Pack 1 (KB968369)" as an optional update in the updates list. I've tried to intstall it but it failed with Code CF2E222F. I found nothing about this code on the internet.
I've also tried to install the sp manually. I've downloaded it an tried to install. But it also failed.
SQL Server Setup has encountered the following error: C:\Windows\Installer\9bcac.msi.
Any suggestions?

Here's the summary:
Overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure, review the log files.
Exit code (Decimal): -819060177
Exit facility code: 1838
Exit error code: 8751
Exit message: C:\Windows\Installer\9bcac.msi
Start time: 2010-04-28 10:10:14
End time: 2010-04-28 10:11:02
Requested action: Patch
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100428_100952\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.2531.0%26EvtType%3d0x4C9229A1%400x2FCB8C55
Machine Properties:
Machine name: MACHINE_NAME
Machine processor count: 4
OS version: Windows Vista
OS service pack:
OS region: Türkiye
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 RETAILSTORE MSSQL10.RETAILSTORE Database Engine Services 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services 1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication 1033 Express Edition 10.1.2531.0 No
Sql Server 2008 Management Tools - Basic 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Management Tools - Complete 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Client Tools Connectivity 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Client Tools Backwards Compatibility 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Client Tools SDK 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Integration Services 1033 Developer Edition 10.1.2531.0 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 1
KBArticle: KB968369
KBArticleHyperlink: http://support.microsoft.com/?kbid=968369
PatchType: SP
AssociateHotfixBuild: 0
Platform: x86
PatchLevel: 10.1.2531.0
ProductVersion: 10.0.1600.22
GDRReservedRange: 10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
PackageName: SQLServer2008-KB968369-x86.exe
Installation location: g:\2aa334eee83bd39b499730\x86\setup\
User Input Settings:
ACTION: Patch
ALLINSTANCES: False
CLUSTERPASSIVE: False
CONFIGURATIONFILE:
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
QUIET: False
QUIETSIMPLE: False
X86: False
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.IO.FileNotFoundException
Message:
C:\Windows\Installer\9bcac.msi
Data:
DisableWatson = true
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetDBProperty(ServiceContainer context, String pathToMsi, String propertyName)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.GetMsiRtmVersion(PackageInstallProperty targetPackage)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.IsApplicablePatch(PatchProperty currentPatch, PackageInstallProperty targetPackage)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Configuration.MsiExtension.ProductInstallProperty.GetInstalledPackages(String instanceName, List`1& installedInstancePackages, List`1& installedSharedPackages, String& returnedErrorMessage)
at Microsoft.SqlServer.Configuration.MsiExtension.ProductInstallProperty.CollectProductData()
at Microsoft.SqlServer.Configuration.FeatureTreeConfigurationBase.LoadFeatureTreeDefinitionAllInstances()
at Microsoft.SqlServer.Configuration.FeatureTreeConfigurationBase.LoadFeatureTreeDefinition()
at Microsoft.SqlServer.Configuration.FeatureTreeConfigurationBase..ctor(ServiceContainer context)
at Microsoft.SqlServer.Configuration.PatchFeatureTree..ctor(ServiceContainer context)
at Microsoft.SqlServer.Configuration.PatchFeatureTree.InitializePatchFeatureTree(ServiceContainer context)
at Microsoft.SqlServer.Configuration.SetupExtension.InitializeUIDataAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)

Essbase registration to Shared Services failed - Hyp 11.1.1.3 on 2 Win XP

Hi All,
I have Hyperion 11.1.1.3 installation on two XP Pro machines. Pure system, with no global policies, firewalls, etc. My users are in Administrators group. Computers are not in any domain also.
On first server (called HypTSerwer1) there is: Foundation (Shared Services Web Application and OpenLDAP Service)
On second server (called HypTSerwer3) there are: Oracle DB (10R2) + Essbase Services Server 32-bit
I've configured Shared Services, I can log as admin to Shared Services Console without any problem. Validation report contains all greens.
But when I try to configure HypTSerwer3 (essbase) I get: Register with Shared Services Failed. Validation report contains one failure in Hyperion Foundation (
EXT: External Authentication Check Native Directory external authentication provider configuration
Error: Provider is not reachable
Recommended Action: Check Shared Services Configuration
)(OpenLDAP is green and runs fine)
In HypTSerwer3 in C:\Hyperion\logs\config\SharedServices_Security_Client.txt I found:
Got hub location from Registry:http://HypTSerwer1:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
Got native directory location from Registry::28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
URL constructed out of values in Registry database:ldap://:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
27:1112:Failed to connect to at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
27:1112:Failed to connect to at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory. [Root Cause: 27:1112:Failed to connect to at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
Native Directory is not reachable. Attempting to re-connect... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
The part connect to at 28089* looks strange for me, as it sugests, that there is no server name, only port.
I really don't know what to do next. I reinstalled it many times, checked if all services are running. Deployed it with Tomcat or WebLogic 9.2. And always with the same result. When I install everything in only one machine, than it is working fine.
Thanks for any help or suggestion.

Just out of interest why have you used OAS as it is pretty much dead product now and is not used in future releases.
Anyway I am not sure why you have closed ports between those servers, you will end up spending a lot of time trying to open all the required ports between the servers.
Can you not get all the ports open for a time just to check it definitely is a ports issue.
It is probably also worth checking the following spreadsheet out - http://www.oracle.com/technetwork/middleware/bi-foundation/epm-components-communications-fd-11-128629.xls
It highlights the ports used in communication.
Cheers
John
http://john-goodwin.blogspot.com/

EPM 11.1.1.3 Shared Services and Registration

Hi all,
I installed EPM 11.1.1..3 on a windows 2003 server
Install is ok. I then used config tool to configure repositories (Oracle 10g) , deploy ( Websphere 6.1) and register with shared services :
Here is my issue : I can log to shared services but I cannot create any application group : log says I try to add a duplicate name ( tried several times with different names , still same error ) , I cannot provision anything for user admin ( shared services console says no application is available or insufficient rights)
During configuration for eas, planning... , database connections where ok, deployment ok but they all failed the registration with shared services. Log says there is an oracle error 1722 , invalid number !!
When externalizing users in Essbase , it fails saying "UnableToGetNodeRevisionDescriptor"
Checked database settings ( UTF8) looks fine. I tried to deploy shared services with tomcat same problem...
If you have any ideas or hints , I would appreciate
Thanks

Hi Christophe
Try to reinstall shared services then run configuration only for shared services commons setting and database. after that configure "server deployement. then stop shared services web application and open LDAP server. start it again. check that shared services works perfectly by launching the web app.
After that configure the other products one by one.
regards
Laurent BRECHON-CORNERY
EPM System Engeenier
*Partake Consulting France*
partake.com

Shared services security and essbase security

recently upgraded to sys 9 and now use shared services 931
we used to have security at essbase level previously and now its all Shared services..
now i have so many concerns
Can we automate the security just like I used to automate in essbase earlier...
or can we automate secuirty in essbase and them sync it to Shared services??
I know that we change security settings in SS and then sync it to essbase but is the other way around possible???
IF yes HOW?
IF NOT - can we automate SS security which reflects to essbase...
I have to go through the prod doc and I'll do that very soon but any suggestion on this would really help me out..
Thanks in advance

Hi,
can you please write more about which products and version are you using and on which operating system name and version.
Why do you use Shared Services? Are you using only Essbase server or any other server? If you use only Essbase server there is probably no need of using Shared Services.
If you need only Essbase you can see my info about installing Essbase without Shared Services: hyperion essbase installation
Please provide more info, so that we on forum can help you.
Regards,
Grofaty

Shared services installation problem

Hi,
i have installed and configured shared services, configuration was also successfull, when i am trying to luanch through user management or internet explorer, it is getting page is not displayed.
when we install shared services java runtime environment should get install. which is not there in internet explorer advanced settings and add& remove programs.
when i try to stop the shared services in services list it is giveing error message 1033 and server is not responding.
webserver = iis 6.0
application server =apache
i am trying since very long for this installation.
pls can any one could suggest what more i should do for above installation
adavance thanks
kanth

thank u,
i am trying to install 9.3.1 version
in services when i am trying to stop ldap and shared services it is not getting stopped
error message is it is not getting respond to the action
error is 1033
i am using computer name as server name
one more thing is when we run hyperion we need to do some setting in internet explore for security and advanced option.
in advanced options setting a java icon will get created which is not getting in internet explorer advanced option
first time when i installed it was running perfectly i formatted and trying to re install
thanks
kanth

Shared Services / WebLogic Installation Problem

Hi,
I'm starting an install of 11.1.1.3 on a Windows 2003 EE R2 and have run into problems with the automatic deployment of the HSS application server. It appears that the config tool cannnot "reach" or start the WebLogic admin console.
Details:
WebLogic 9.2 MP3
hyperion has been created as a WL Admin
Node Manager is running on port 5556
Any thoughts or suggestions would be welcome.
Thanks
Mark

Are you just trying to do a standard automatic deployment? If so, the node manager doesn't really have much to do with that -- has anything been deployed on this box already?
The first thing the config tool is going to do is deploy the admin server, then Shared Services; has the admin server itself been deployed at this point?
Check your Hyperion Home directory and see if there's a .\deployments\Weblogic9 directory; if there is, go to .\bin under there, and look for 'startWebLogic.cmd'.
Before running that file, open a command prompt and type:
netstat -an | findstr 7001
7001 is the admin server port; if it's already running, you'll see a LISTEN entry there. If you don't see a LISTEN, run startWebLogic.cmd, wait for it to start, then run the above netstat command in another command prompt. If you now see a LISTEN command, try logging into the admin server:
http://<wlhost>:7001/console
Login is just 'hyperion'.
If that works, great! Try your Shared Services deployment again.
If there is no HYPHOME\deployments directory (this is created when the admin server is deployed), clear out the config tool log (HYPHOME\logs\config\configtool.log), try the deployment again, and then copy the pertinent sections here.
Remember also, the config tool -- in an automatic deployment scenario -- is going to create its own weblogic profile, called hyslProfile. If you already have existing weblogic domains running on this box, Hyperion isn't going to use them -- if you do, and they aren't in use by anything, it would probably be best to just remove them. It's possible that if there's another non-hyslProfile admin server running on :7001 on that machine, the config tool could be getting confused.
Edited by: Dr. Bloodmoney on Jul 8, 2011 1:07 PM

Hyperion Shared Services Installation Problem (URGENT)

Hi,
I have installed the Hyperion Shared serives 9.3.1 with Oracle Application server and configured with the same but in
services.msc i am able to see only HyperionS9OpenLDAp. i did the all post task and did manual configuration for
Oracle Application Server like
1 Created new OC4J instance for Shared services
2 Added the below lines respective config/global-webapplication.xml file
<init-param>
<param-name>req_time_introspection</param-name>
<param-value>true</param-value>
</init-param>
3 set the heap size
Maximum heap size 512M
Initial heap size 256M
4 Added the Java Options below
-Dhyperion.home=<HYPERION_HOME>
-XX:PermSize=64m
-XX:MaxPermSize=128m
5 Deploying interop.war
6 Added the below lines to Jave calss path
<HYPERION_HOME>\deployments\generic\SharedServices9\config;
<HYPERION_HOME>\deployments\generic\SharedServices9\config\lib
\HubProductBean.jar;
<HYPERION_HOME>\common\JDBC\DataDirect\3.6\lib\hyjdbc.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-collections-3.2.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-dbcp-1.2.1.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-logging-1.1.jar;
<HYPERION_HOME>\common\JakartaCommons\commons-pool-1.3.jar;
<HYPERION_HOME>\common\loggers\Log4j\1.2.14\lib\log4j-1.2.14.jar;
<HYPERION_HOME>\common\XML\JAXP\1.2.2\xercesImpl.jar
<HYPERION_HOME>\common\SAP\lib;
But i able to get only one service.
Please help on this
Regads
KumarK

hi,
I have the same supported Version of ORACLE APPLICATION SERVER 10g 10.1.3.1 and for the not able to see the Hyperion Shared Services service in Services.msc as while installing Shared Services there no Option like Deploy as Windows services so not able to see there i think.Please correct me if wrong.
Here i have one doubt while Configuring Shared Services with Oracle Application Server we are not specified the port number for Shared Services. So is it takes the same PORT number and URL is
http://<servername>:58080/interop/
Please clarify me.
Regards
KUMARK

Problems with Shared Services Manual Deploy

Hi everyone, I'm installing Oracle EPM 11.1.1.3 and deploying manually in a HPUX server, I only install in the Foundation Module, Shared Services, openLDAP and the common components, workspace, calculation manager and EPMA are out of this installation because, I only want to install Essbase, EAS and APS, but I have a problem, when I deploy the interop war I get failed on the deploy status with the next stack trace on weblogic console
[HTTP:101216]Servlet: "HubFrameworkServlet" failed to preload on startup in Web application: "interop".
java.lang.NullPointerException
     at com.hyperion.hub.struts.action.HUBActionServlet.initCSS(Unknown Source)
     at com.hyperion.hub.struts.action.HUBActionServlet.init(Unknown Source)
     at javax.servlet.GenericServlet.init(GenericServlet.java:256)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:278)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:507)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1723)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1700)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1620)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2770)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:889)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:333)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:566)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:136)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:104)
     at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:139)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:320)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:815)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1222)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:433)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:891)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:333)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:566)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:136)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:104)
     at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:139)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:320)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:815)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1222)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:433)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.lang.NullPointerException
     at com.hyperion.hub.struts.action.HUBActionServlet.initCSS(Unknown Source)
     at com.hyperion.hub.struts.action.HUBActionServlet.init(Unknown Source)
     at javax.servlet.GenericServlet.init(GenericServlet.java:256)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:278)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:507)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1723)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1700)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1620)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2770)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:889)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:333)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:566)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:136)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:104)
     at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:139)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:320)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:815)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1222)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:433)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
I can't past from this point, so I'm searching what's the reason, why this deployment can't work, I search with the validation tool and get the next log, it looks like theres something called hubRegistration that isn't configured and the other thing that I'm not sure is that I get a "Failed to connect to native directory." , Can someboyd help me with this?? I'll appreciate any kind of help that you can give me mates, thanks in advance and have a nice day.

And the other part
19:26:13,216 INFO [CSSLogger] Initializing CSS from Registry. - at com.hyperion.css.common.CSSLogger.getConfiguration(?:?)
19:26:13,249 INFO [CSSLogger] Trying to get Registry Instance - at com.hyperion.css.common.CSSLogger.<init>(?:?)
19:26:13,314 INFO [CSSLogger] Got Registry Instance - at com.hyperion.css.common.CSSLogger.<init>(?:?)
19:26:13,435 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.cacheRefreshInterval has value 60 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,437 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.group.descAttribute has value description - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,438 DEBUG [CSSLogger] Property Name: spi.provider.common.native.role.nameAttribute has value cn - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,439 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.group.objectclass.entry has value group?member - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,441 DEBUG [CSSLogger] Property Name: spi.provider.common.native.ctxFactory has value com.sun.jndi.ldap.LdapCtxFactory - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,442 DEBUG [CSSLogger] Property Name: logger.priority has value WARN - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,444 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.user.fnAttribute has value givenname - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,445 DEBUG [CSSLogger] Property Name: spi.provider.factory.msad has value com.hyperion.css.spi.impl.msad.MSADFactory - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,446 DEBUG [CSSLogger] Property Name: spi.provider.factory.sap has value com.hyperion.css.spi.impl.sap.SAPFactory - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,448 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.authType has value simple - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,449 DEBUG [CSSLogger] Property Name: spi.provider.common.native.role.descAttribute has value description - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,450 DEBUG [CSSLogger] Property Name: spi.provider.common.sap.poolName has value CSS_SAP_POOL - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,452 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.user.objectclass.entry has value [person, organizationalPerson, inetOrgPerson] - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,453 DEBUG [CSSLogger] Property Name: spi.provider.common.native.role.objectclass.entry has value [groupofuniquenames?uniquemember, cssRole] - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,455 DEBUG [CSSLogger] Property Name: spi.provider.factory.db has value com.hyperion.css.spi.impl.db.DBFactory - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,456 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.internalQueryBatchSize has value 50 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,458 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.user.loginAttribute has value cn - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,459 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.user.emailAttribute has value mail - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,460 DEBUG [CSSLogger] Property Name: spi.provider.common.native.group.isActiveAttribute has value cssIsActive - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,462 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.user.snAttribute has value sn - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,463 DEBUG [CSSLogger] Property Name: spi.provider.factory.ntlm has value com.hyperion.css.spi.impl.ntlm.NTLMFactory - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,464 DEBUG [CSSLogger] Property Name: spi.provider.common.native.startupRetryInterval has value 3 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,466 DEBUG [CSSLogger] Property Name: spi.provider.common.native.user.objectclass.entry has value cssInetOrgPersonExtend - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,467 DEBUG [CSSLogger] Property Name: spi.provider.common.native.internalQueryBatchSize has value 50 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,468 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.group.nameAttribute has value cn - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,470 DEBUG [CSSLogger] Property Name: hub.location has value http://ucadmty6:28080 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,471 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.identityAttribute has value dn - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,473 DEBUG [CSSLogger] Property Name: searchOrder.el has value [Native Directory] - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,474 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.group.objectclass.entry has value [groupofuniquenames?uniquemember, groupOfNames?member] - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,475 DEBUG [CSSLogger] Property Name: spi.provider.common.native.authType has value simple - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,477 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.cacheRefreshInterval has value 60 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,478 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.group.descAttribute has value description - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,479 DEBUG [CSSLogger] Property Name: spi.provider.factory.native has value com.hyperion.css.spi.impl.nv.NativeFactory - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,481 DEBUG [CSSLogger] Property Name: spi.provider.factory.ldap has value com.hyperion.css.spi.impl.ldap.LDAPFactory - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,482 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.user.descAttribute has value description - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,484 DEBUG [CSSLogger] Property Name: spi.provider.common.native.maxGroupNestedLevel has value 21 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,485 DEBUG [CSSLogger] Property Name: spi.provider.common.native.user.fnAttribute has value givenname - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,487 DEBUG [CSSLogger] Property Name: spi.provider.common.native.role.url has value ou=Roles - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,488 DEBUG [CSSLogger] Property Name: spi.provider.common.native.startupRetryLimit has value 10 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,489 DEBUG [CSSLogger] Property Name: spi.provider.common.native.user.isActiveAttribute has value cssIsActive - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,491 DEBUG [CSSLogger] Value is map: - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,492 DEBUG [CSSLogger] Key is: spi.provider.type value is: native - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,494 DEBUG [CSSLogger] Key is: spi.provider.name value is: Native Directory - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,495 DEBUG [CSSLogger] Property Name: spi.provider.Native Directory has value {spi.provider.type=native, spi.provider.name=Native Directory} - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,497 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.user.descAttribute has value description - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,498 DEBUG [CSSLogger] Property Name: spi.provider.common.native.trusted has value true - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,500 DEBUG [CSSLogger] Property Name: spi.provider.common.native.user.snAttribute has value sn - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,501 DEBUG [CSSLogger] Property Name: spi.provider.common.native.user.url has value ou=People - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,502 DEBUG [CSSLogger] Property Name: spi.provider.common.native.group.url has value ou=Groups - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,504 DEBUG [CSSLogger] Property Name: spi.provider.common.native.user.emailAttribute has value mail - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,505 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.authType has value simple - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,507 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.ctxFactory has value com.sun.jndi.ldap.LdapCtxFactory - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,508 DEBUG [CSSLogger] Property Name: spi.provider.common.native.user.descAttribute has value description - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,509 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.user.emailAttribute has value mail - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,511 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.identityAttribute has value dn - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,512 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.ctxFactory has value com.sun.jndi.ldap.LdapCtxFactory - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,513 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.identityAttributeType has value String - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,516 DEBUG [CSSLogger] Property Name: spi.provider.common.native.cacheRefreshInterval has value 60 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,517 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.user.fnAttribute has value givenname - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,520 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.user.objectclass.entry has value user - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,521 DEBUG [CSSLogger] Property Name: spi.provider.common.native.user.loginAttribute has value cssDisplayNameDefault - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,523 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.internalQueryBatchSize has value 50 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,524 DEBUG [CSSLogger] Property Name: token.timeout has value 480 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,525 DEBUG [CSSLogger] Property Name: spi.provider.common.native.group.nameAttribute has value cssDisplayNameDefault - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,527 DEBUG [CSSLogger] Property Name: spi.provider.common.native.identityAttribute has value dn - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,528 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.user.loginAttribute has value uid - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,530 DEBUG [CSSLogger] Property Name: spi.provider.common.native.group.objectclass.entry has value [groupofuniquenames?uniquemember, cssGroupExtend?cssIsActive] - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,531 DEBUG [CSSLogger] Property Name: hub.dirPort has value 28089 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,532 DEBUG [CSSLogger] Property Name: spi.provider.common.ldap.group.nameAttribute has value cn - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,534 DEBUG [CSSLogger] Property Name: spi.provider.common.sap.poolSize has value 20 - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,535 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.identityAttributeType has value String - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,536 DEBUG [CSSLogger] Property Name: spi.provider.common.native.role.productCodeAttribute has value cssProductCode - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,538 DEBUG [CSSLogger] Property Name: spi.provider.common.msad.user.snAttribute has value sn - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,539 DEBUG [CSSLogger] Property Name: spi.provider.common.native.group.descAttribute has value description - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,541 DEBUG [CSSLogger] Property Name: delegatedUserManagement.enabled has value false - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,749 INFO [CSSLogger] Got hub location from Registry:http://ucadmty6:28080 - at com.hyperion.css.common.CSSLogger.getHubLocationFromRegistry(?:?)
19:26:13,950 INFO [CSSLogger] Got native directory location from Registry:ucadmty6:28089 - at com.hyperion.css.common.CSSLogger.getNativeProviderLocationFromRegistry(?:?)
19:26:13,951 INFO [CSSLogger] URL constructed out of values in Registry database:ldap://ucadmty6:28089/dc=css,dc=hyperion,dc=com - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:13,953 DEBUG [CSSLogger] CSS Configuration intialized. : [612 ms] - at com.hyperion.css.common.CSSLogger.initConfiguration(?:?)
19:26:14,028 DEBUG [CSSLogger] 20:3502:Missing file HSSLogger.properties. - at com.hyperion.css.common.CSSLogger.<init>(?:?)
19:26:14,030 INFO [ExternalProvidersChecker] CSS initializing - at com.hyperion.cis.validation.checkers.impl.ExternalProvidersChecker.check(ExternalProvidersChecker.java:72)
19:26:14,034 DEBUG [CSSLogger] 20:3502:Missing file HSSLogger.properties. - at com.hyperion.css.common.CSSLogger.<init>(?:?)
19:26:45,426 ERROR [ExternalProvidersChecker] Error checking Shared Services: - at com.hyperion.cis.validation.checkers.impl.ExternalProvidersChecker.check(ExternalProvidersChecker.java:88)
Error Code: -1
com.hyperion.css.common.configuration.CSSConfigurationException: 20:3008:Failed to connect to native directory.      Error Code: 9
     at com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
     at com.hyperion.css.spi.CSSManager.initProviders(Unknown Source)
     at com.hyperion.css.spi.CSSManager.initialize(Unknown Source)
     at com.hyperion.css.spi.CSSManager.<init>(Unknown Source)
     at com.hyperion.css.spi.CSSManager.getInstance(Unknown Source)
     at com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
     at com.hyperion.css.CSSSystem.getInstance(Unknown Source)
     at com.hyperion.cis.validation.checkers.impl.ExternalProvidersChecker.check(ExternalProvidersChecker.java:73)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:142)
     at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:201)
     at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:117)
     at org.mozilla.javascript.gen.c7._c0(./scripts/extProvidersCheck.js:1)
     at org.mozilla.javascript.gen.c7.call(./scripts/extProvidersCheck.js)
     at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:337)
     at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:2755)
     at org.mozilla.javascript.gen.c7.call(./scripts/extProvidersCheck.js)
     at org.mozilla.javascript.gen.c7.exec(./scripts/extProvidersCheck.js)
     at org.mozilla.javascript.Context.evaluateReader(Context.java:1175)
     at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:223)
     at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:274)
     at com.hyperion.cis.validation.RunningEnviroment.access$000(RunningEnviroment.java:40)
     at com.hyperion.cis.validation.RunningEnviroment$1.run(RunningEnviroment.java:131)
19:26:45,726 DEBUG [JDBCChecker] Conexión con la base de datos jdbc:hyperion:oracle://ucadmy10.lac.nsroot.net:30670;SID=ORAC670 - at com.hyperion.cis.validation.checkers.impl.JDBCChecker.checkConnectivity(JDBCChecker.java:111)
19:26:45,849 DEBUG [ConfigCompleteChecker] Check if all tasks configured successful for Hyperion Foundation - at com.hyperion.cis.validation.checkers.impl.ConfigCompleteChecker.check(ConfigCompleteChecker.java:59)
19:26:45,852 DEBUG [ValidationContextFactory] Trying to get ValidationContext using: Studio - at com.hyperion.cis.validation.ValidationContextFactory.getValidationContext(ValidationContextFactory.java:41)
19:26:45,885 DEBUG [ConfigCompleteChecker] Check if all tasks configured successful for Studio - at com.hyperion.cis.validation.checkers.impl.ConfigCompleteChecker.check(ConfigCompleteChecker.java:59)
19:26:45,887 WARN [ConfigCompleteChecker] Todavía no se han completado algunas de las tareas de configuración sugeridas. - at com.hyperion.cis.validation.checkers.impl.ConfigCompleteChecker.check(ConfigCompleteChecker.java:96)
19:26:46,240 INFO [ReportProcessor] Try to generate report for object: com.hyperion.cis.validation.reports.ReportDTO@7124af and template file name: ./templates/template.vm - at com.hyperion.cis.validation.reports.ReportProcessor.saveResultsToStream(ReportProcessor.java:77)
19:26:46,242 INFO [ReportProcessor] Try to parse template [./templates/template.vm] - at com.hyperion.cis.validation.reports.ReportProcessor.parseTemplate(ReportProcessor.java:132)
19:26:46,407 INFO [ReportProcessor] Report generated successfully - at com.hyperion.cis.validation.reports.ReportProcessor.saveResultsToStream(ReportProcessor.java:86)
19:26:47,371 ERROR [HelpBrowser] java.io.IOException: firefox: not found - at com.hyperion.help.HelpBrowser.openURL(HelpBrowser.java:81)
19:26:47,776 ERROR [HelpBrowser] Unable to load page in a System Browser - at com.hyperion.help.HelpBrowser.displayHelp(HelpBrowser.java:49)
java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
     at java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:159)
     at java.awt.Window.<init>(Window.java:317)
     at java.awt.Frame.<init>(Frame.java:419)
     at java.awt.Frame.<init>(Frame.java:384)
     at javax.swing.SwingUtilities$SharedOwnerFrame.<init>(SwingUtilities.java:1666)
     at javax.swing.SwingUtilities.getSharedOwnerFrame(SwingUtilities.java:1743)
     at javax.swing.JOptionPane.getRootFrame(JOptionPane.java:1624)
     at javax.swing.JOptionPane.showOptionDialog(JOptionPane.java:836)
     at javax.swing.JOptionPane.showMessageDialog(JOptionPane.java:645)
     at javax.swing.JOptionPane.showMessageDialog(JOptionPane.java:616)
     at javax.swing.JOptionPane.showMessageDialog(JOptionPane.java:587)
     at com.hyperion.help.HelpBrowser.openURL(HelpBrowser.java:82)
     at com.hyperion.help.HelpBrowser.displayHelp(HelpBrowser.java:47)
     at com.hyperion.cis.validation.VTDisplaySilent.exec(VTDisplaySilent.java:25)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.hyperion.cis.validation.VTLauncher.main(VTLauncher.java:85)

Error installation Essbase Shared Services

Hello,
I have installed Essbase .4 and i have created a database oracle 12c.
When i have configured the Essabase, i have an error about shared services :
"The database contains no information services shares"
But i have tried the connexion in my database and it's Ok.
Do you help me?
Congrats,
Clara

I have the same problem.
Having installed Essbase Server, I was taken directly to the Configuration tool. I have accepted all the defaults but encounter the message "Registration parameters cannot be validated successfully. Please check that the information entered is correct"
I have accepted the defaults. I have used the password 'password'.
Would appreciate help to get past this.
I did try the previous suggestion but do not see an option to exclude Workspace installation.
JOHN

Multiple shared services installs in the same environment?

In IOP 11.1.2 and beyond, shared services handles user authentication, to take advantage of Active Directory.
Can you install EPM shared services on 2 nodes in the same environment (failover in case one goes down)?
Is this possible or recommended?
Thank you.

I posted this message also in the Forum: Server & Storage Systems: Administration - General : Installation.
I'll also double-check the install documentation. A quick google of "EPM Shared Services" and some choice keywords revealed a link to this:
http://www.oracle.com/technetwork/middleware/bi-foundation/epm-hss-active-active-clusters-wp-1-132647.pdf
Note that one of the instructions in the active-active-clusters white paper is to install shared services on two nodes, to prevent a single point of failure.
This location http://www.oracle.com/technetwork/middleware/bi-foundation includes EPM DR instructions.
Highly recommended reading.
I apologize to the group for wasting the bandwidth on this question.
Thank you.

Shared services installation.

through configuration utility - i am unable to configure shared services (configure database and deploy to App Server) .
Given username & Password ( hypuser and password ) for SID (hypuser)
on Database configuration details popup.
got the below error,
"unable to connect to the database for the product Hyperion Shared services"
My Question is ,
Do i need to create SID on oracle(database) , if so how can i create?
Do i have to create users hypuser on oracel.
Note: SID- "hypuser" and username "hypuser" are read only.

kindly provide the details like version,o/s,database and what error you are facing.
Main Idea behind successful installation is Prerequisite, if you go through it properly and follow according to Installation guide
anyway give the details.
Thanks
Dhanjit G.

Problem assigning Essbase Security filters in Shared Services

We recently upgraded Planning/Essbase to System 9 version 931 in Test. Everything went smoothly except for few users Security didn't migrate properly.
In Shared Services, it shows that user has access to Planning & Native Essbase Applications. But in Essbase, only Planning Application access is shown.
Also when I try to apply security filters for these users in Native Essbase Applications (in Shared Services), I don't see these particular users.
There is no problem with Planning security, except when I refresh Security from Shared Services in Analytic Admin Console it wipes out Planning Application access in Essbase.
For other users there are no issues. Only for few users this is the problem. I have tried to deprovision user & provision back, but no use.
Please Help

Essbase/Planning security is multi tiered. In Shared Services you setup your groups. You provision your groups with adequate security access. Depending on whether you have updated a cetain .css file(to fix bug) you may have to assign the read, write calc access to the group not just calc, but all three if your users need the access to actually, read, write & calc. of need user to just read & write etc... then you have to go to EAS refresh, run maxl script to assign environment access to user, go back to shared services go into projects assign any needed access to calc & filter groups and essbase is setup. For planning you also have to go to workspace and migrate identities within the security setup for any of your dimensions. this comes into play when adding or removing users as filters are created in planning workspace. I just learned this from one good tech that helped me setup & remove users as I had issues getting them in and out of the system..Now to move on to actually getting security reports that make sense for planning with the associated access. If anyone has the maxl code let me know.

Shared Services(11.x) installation problem

Similar Messages

Maybe you are looking for